Change in spinal bone mineral density as estimated by Hounsfield units following osteoporosis treatment with romosozumab, teriparatide, denosumab, and alendronate: an analysis of 318 patients.

OBJECTIVE: The purpose of this study was to determine the effect of osteoporosis medications on opportunistic CT-based Hounsfield units (HU). METHODS: Spine and nonspine surgery patients were retrospectively identified who had been treated with romosozumab for 3 to 12 months, teriparatide for 3 to 12 months, teriparatide for > 12 months, denosumab for > 12 months, or alendronate for > 12 months. HU were measured in the L1-4 vertebral bodies. One-way ANOVA was used to compare the mean change in HU among the five treatment regimens. RESULTS: In total, 318 patients (70% women) were included, with a mean age of 69 years and mean BMI of 27 kg/m2. There was a significant difference in mean HU improvement (p < 0.001) following treatment with romosozumab for 3 to 12 months (n = 32), teriparatide for 3 to 12 months (n = 30), teriparatide for > 12 months (n = 44), denosumab for > 12 months (n = 123), and alendronate for > 12 months (n = 100). Treatment with romosozumab for a mean of 10.5 months significantly increased the mean HU by 26%, from a baseline of 85 to 107 (p = 0.012). Patients treated with teriparatide for > 12 months (mean 23 months) experienced a mean HU improvement of 25%, from 106 to 132 (p = 0.039). Compared with the mean baseline HU, there was no significant difference after treatment with teriparatide for 3 to 12 months (110 to 119, p = 0.48), denosumab for > 12 months (105 to 107, p = 0.68), or alendronate for > 12 months (111 to 113, p = 0.80). CONCLUSIONS: Patients treated with romosozumab for a mean of 10.5 months and teriparatide for a mean of 23 months experienced improved spinal bone mineral density as estimated by CT-based opportunistic HU. Given the shorter duration of effective treatment, romosozumab may be the preferred medication for optimization of osteoporotic patients in preparation for elective spine fusion surgery.

Transforaminal lumbar interbody fusion subsidence: computed tomography analysis of incidence, associated risk factors, and impact on outcomes.

OBJECTIVE: The aims of this study were to 1) define the incidence of transforaminal lumbar interbody fusion (TLIF) interbody subsidence; 2) determine the relative importance of preoperative and intraoperative patient- and instrumentation-specific risk factors predictive of postoperative subsidence using CT-based assessment; and 3) determine the impact of TLIF subsidence on postoperative complications and fusion rates. METHODS: All adult patients who underwent one- or two-level TLIF for lumbar degenerative conditions at a multi-institutional academic center between 2017 and 2019 were retrospectively identified. Patients with traumatic injury, infection, malignancy, previous fusion at the index level, combined anterior-posterior procedures, surgery with greater than two TLIF levels, or incomplete follow-up were excluded. Interbody subsidence at the superior and inferior endplates of each TLIF level was directly measured on the endplate-facing surface of both coronal and sagittal CT scans obtained greater than 6 months postoperatively. Patients were grouped based on the maximum subsidence at each operative level classified as mild, moderate, or severe based on previously documented < 2-mm, 2- to 4-mm, and ≥ 4-mm thresholds, respectively. Univariate and regression analyses compared patient demographics, medical comorbidities, preoperative bone quality, surgical factors including interbody cage parameters, and fusion and complication rates across subsidence groups. RESULTS: A total of 67 patients with 85 unique fusion levels met the inclusion and exclusion criteria. Overall, 28% of levels exhibited moderate subsidence and 35% showed severe subsidence after TLIF with no significant difference in the superior and inferior endplate subsidence. Moderate (≥ 2-mm) and severe (≥ 4-mm) subsidence were significantly associated with decreases in cage surface area and Taillard index as well as interbody cages with polyetheretherketone (PEEK) material and sawtooth surface geometry. Severe subsidence was also significantly associated with taller preoperative disc spaces, decreased vertebral Hounsfield units (HU), the absence of bone morphogenetic protein (BMP) use, and smooth cage surfaces. Regression analysis revealed decreases in Taillard index, cage surface area, and HU, and the absence of BMP use predicted subsidence. Severe subsidence was found to be a predictor of pseudarthrosis but was not significantly associated with revision surgery. CONCLUSIONS: Patient-level risk factors for TLIF subsidence included decreased HU and increased preoperative disc height. Intraoperative risk factors for TLIF subsidence were decreased cage surface area, PEEK cage material, bullet cages, posterior cage positioning, smooth cage surfaces, and sawtooth surface designs. Severe subsidence predicted TLIF pseudarthrosis; however, the causality of this relationship remains unclear.

Biomechanical, biochemical, and histological characterization of sacroiliac joint cartilage in the Yucatan minipig.

Although the sacroiliac (SI) joint can be a source of lower back and buttock pain, no comprehensive characterization studies on SI cartilage have been conducted. Using the minipig as a large animal model, this study conducted the first biomechanical, biochemical, and histological characterization of SI joint cartilage. Because previous literature has reported that sacral cartilage and iliac cartilage within the SI joint are histologically distinct, concomitantly it was expected that functional properties of the sacral cartilage would differ from those of the iliac cartilage. Creep indentation, uniaxial tension, biochemical, and histological analyses were conducted on the sacral and iliac cartilage of skeletally mature female Yucatan minipigs (n = 6-8 for all quantitative tests). Concurring with prior literature, the iliac cartilage appeared to be more fibrous than the sacral cartilage. Glycosaminoglycan content was 2.2 times higher in the sacral cartilage. The aggregate modulus of the sacral cartilage was 133 ± 62 kPa, significantly higher than iliac cartilage, which only had an aggregate modulus of 51 ± 61 kPa. Tensile testing was conducted in both cranial-caudal and ventral-dorsal axes, and Young's modulus values ranged from 2.5 ± 1.5 MPa to 13.6 ± 1.5 MPa, depending on anatomical structure (i.e., sacral vs. iliac) and orientation of the tensile test. The Young's modulus of sacral cartilage was 5.5 times higher in the cranial-caudal axis and 2.0 times higher in the ventral-dorsal axis than the iliac cartilage. The results indicate that the sacral and iliac cartilages are functionally distinct from each other. Understanding the distinct differences between sacral and iliac cartilage provides insight into the structure and function of the SI joint, which may inform future research aimed at repairing SI joint cartilage.

Assessing the Fractional Curve for Proper Management of Adult Degenerative Scoliosis.

Adult degenerative scoliosis (ADS) is a coronal plane deformity often accompanied by sagittal plane malalignment. Surgical correction may involve the major and/or distally-located fractional curves (FCs). Correction of the FC has been increasingly recognized as key to ameliorating radicular pain localized to the FC levels. The present study aims to summarize the literature on the rationale for FC correction in ADS. Three databases were systematically reviewed to identify all primary studies reporting the rationale for correcting the FC in ADS. Articles were included if they were English full-text studies with primary data from ADS ( ≥ 18 years old) patients. Seventy-four articles were identified, of which 12 were included after full-text review. Findings suggest FC correction with long-segment fusion terminating at L5 increases the risk of distal junctional degeneration as compared to constructs instrumenting the sacrum. Additionally, circumferential fusion offers greater FC correction, lower reoperation risk, and shorter construct length. Minimally invasive surgery (MIS) techniques may offer effective radiographic correction and improve leg pain associated with foraminal stenosis on the FC concavity, though experiences are limited. Open surgery may be necessary to achieve adequate correction of severe, highly rigid deformities. Current data support major curve correction in ASD where the FC concavity and truncal shift are concordant, suggesting that the FC contributes to the patient's overall deformity. Circumferential fusion and the use of kickstand rods can improve correction and enhance the stability and durability of long constructs. Last, MIS techniques show promise for milder deformities but require further investigation.

Unilateral versus bilateral pedicle screw fixation with anterior lumbar interbody fusion: a comparison of postoperative outcomes.

PURPOSE: To determine of the impact of ALIF with minimally invasive unilateral pedicle screw fixation (UPSF) versus bilateral pedicle screw fixation (BPSF) on perioperative outcomes, radiographic outcomes, and the rates of fusion, subsidence, and adjacent segment stenosis. METHODS: All adult patients who underwent one-level ALIF with UPSF or BPSF at an academic institution between 2015 and 2022 were retrospectively identified. Postoperative outcomes including length of hospital stay (LOS), wound complications, readmissions, and revisions were determined. The rates of fusion, screw loosening, adjacent segment stenosis, and subsidence were assessed on one-year postoperative CT. Lumbar alignment including lumbar lordosis, L4-S1 lordosis, regional lordosis, pelvic tilt, pelvic incidence, and sacral slope were assessed on standing x-rays at preoperative, immediate postoperative, and final postoperative follow-up. Univariate and multivariate analysis compared outcomes across posterior fixation groups. RESULTS: A total of 60 patients were included (27 UPSF, 33 BPSF). Patients with UPSF were significantly younger (p = 0.011). Operative time was significantly greater in the BPSF group in univariate (p < 0.001) and multivariate analysis (ß=104.1, p < 0.001). Intraoperative blood loss, LOS, lordosis, pelvic parameters, fusion rate, subsidence, screw loosening, adjacent segment stenosis, and revision rate did not differ significantly between fixation groups. Though sacral slope (p = 0.037) was significantly greater in the BPSF group, fixation type was not a significant predictor on regression. CONCLUSIONS: ALIF with UPSF relative to BPSF predicted decreased operative time but was not a significant predictor of postoperative outcomes. ALIF with UPSF can be considered to increase operative efficiency without compromising construct stability.

Reporting Compliance and Factors Influencing Timeliness of Stroke-Related Trial Results on ClinicalTrials.gov.

Since 2007, research groups are mandated by the Food and Drug Administration Amendments Act (FDAAA) to report clinical trial findings to ClinicalTrials.gov within 12 months of trial completion. This observational study aims to analyze compliance data of stroke-related randomized controlled trials subject to these mandates. Using a previously published algorithm, we identified clinical trials likely to be required to adhere to FDAAA mandates (highly likely applicable clinical trials, or HLACTs) from January 2008 to February 2023. We assessed the proportion of studies that reported results within 12 months of trial completion, as well as those that reported at any point within 5 years. Additionally, we utilized Kaplan-Meier and regression analysis to explore factors associated with on-time reporting. Among 357 stroke-related HLACTs on ClinicalTrials.gov that were terminated or completed between January 1, 2008, and February 1, 2023, 59 (16.5%) reported results within 12 months, while 320 (89.6%) reported results within 5 years. Median reporting times for industry funded, other government or academic institution funded, and National Institute of Health (NIH) funded studies were 18.5 months, 22 months, and 22.5 months, respectively. Open-label studies were less likely to report results by 12 months compared to double-blinded studies (p = 0.002). Biological trials exhibited a lower probability of reporting within 5 years compared to device and/or drug trials (p = 0.007). Clinical trial registries and FDAAA mandates aim to promote accountability and transparency in health sciences research. However, regardless of their funding source, only a minority of stroke-related randomized controlled trials comply with FDAAA's 12-month result reporting mandate.

Propelling Minimally Invasive Tissue Regeneration With Next-Era Injectable Pre-Formed Scaffolds.

The growing aging population, with its associated chronic diseases, underscores the urgency for effective tissue regeneration strategies. Biomaterials play a pivotal role in the realm of tissue reconstruction and regeneration, with a distinct shift toward minimally invasive (MI) treatments. This transition, fueled by engineered biomaterials, steers away from invasive surgical procedures to embrace approaches offering reduced trauma, accelerated recovery, and cost-effectiveness. In the realm of MI tissue repair and cargo delivery, various techniques are explored. While in situ polymerization is prominent, it is not without its challenges. This narrative review explores diverse biomaterials, fabrication methods, and biofunctionalization for injectable pre-formed scaffolds, focusing on their unique advantages. The injectable pre-formed scaffolds, exhibiting compressibility, controlled injection, and maintained mechanical integrity, emerge as promising alternative solutions to in situ polymerization challenges. The conclusion of this review emphasizes the importance of interdisciplinary design facilitated by synergizing fields of materials science, advanced 3D biomanufacturing, mechanobiological studies, and innovative approaches for effective MI tissue regeneration.

The effect of C2 screw type on perioperative outcomes and long-term stability after C2-T2 posterior cervical decompression and fusion.

PURPOSE: To determine if C2 pedicle versus pars screw type predicts change in fusion status, C2 screw loosening, cervical alignment, and patient-reported outcomes measures (PROMs) after C2-T2 posterior cervical decompression and fusion (PDCF). METHODS: All adult patients who underwent C2-T2 PCDF for myelopathy or myeloradiculopathy between 2013-2020 were retrospectively identified. Patients were dichotomized by C2 screw type into bilateral C2 pedicle and bilateral C2 pars screw groups. Preoperative and short- and long-term postoperative radiographic outcomes and PROMs were collected. Univariate and multivariate analysis compared patient factors, fusion status, radiographic measures, and PROMs across groups. RESULTS: A total of 159 patients met the inclusion/exclusion criteria (76 bilateral pedicle screws, 83 bilateral pars screws). Patients in the C2 pars relative to C2 pedicle screw group were on average more likely to have bone morphogenic protein (p = 0.001) and four-millimeter diameter rods utilized intraoperatively (p = 0.033). There were no significant differences in total construct and C2-3 fusion rate, C2 screw loosening, or complication and revision rates between C2 screw groups in univariate and regression analysis. Changes in C2 tilt, C2-3 segmental lordosis, C0-2 Cobb angle, proximal junctional kyphosis, atlanto-dens interval, C1 lamina-occiput distance, C2 sagittal vertical axis, C2-7 lordosis, and PROMs at all follow-up intervals did not vary significantly by C2 screw type. CONCLUSION: There were no significant differences in fusion status, hardware complications, and radiographic and clinical outcomes based on C2 screw type following C2-T2 PCDF. Accordingly, intraoperative usage criteria can be flexible based on patient vertebral artery positioning and surgeon comfort level.

Bone Quality as Measured by Hounsfield Units More Accurately Predicts Proximal Junctional Kyphosis than Vertebral Bone Quality Following Long-Segment Thoracolumbar Fusion.

OBJECTIVE: To compare the prognostic power of Hounsfield units (HU) and Vertebral Bone Quality (VBQ) score for predicting proximal junctional kyphosis (PJK) following long-segment thoracolumbar fusion to the upper thoracic spine (T1-T6). METHODS: Vertebral bone quality around the upper instrumented vertebrae (UIV) was measured using HU on preoperative CT and VBQ on preoperative MRI. Spinopelvic parameters were also categorized according to the Scoliosis Research Society-Schwab classification. Univariable analysis to identify predictors of the occurrence of PJK and survival analyses with Kaplan-Meier method and Cox regression were performed to identify predictors of time to PJK (defined as ≥10° change in Cobb angle of UIV+2 and UIV). Sensitivity analyses showed thresholds of HU < 164 and VBQ > 2.7 to be most predictive for PJK. RESULTS: Seventy-six patients (mean age 66.0 ± 7.0 years; 27.6% male) were identified, of whom 15 suffered PJK. Significant predictors of PJK were high postoperative pelvic tilt (P = 0.038), high postoperative T1-pelvic angle (P = 0.041), and high postoperative PI-LL mismatch (P = 0.028). On survival analyses, bone quality, as assessed by the average HU of the UIV and UIV+1 was the only significant predictor of time to PJK (odds ratio [OR] 3.053; 95% CI 1.032-9.032; P = 0.044). VBQ measured using the UIV, UIV+1, UIV+2, and UIV-1 vertebrae approached, but did not reach significance (OR 2.913; 95% CI 0.797-10.646; P = 0.106). CONCLUSIONS: In larger cohorts, VBQ may prove to be a significant predictor of PJK following long-segment thoracolumbar fusion. However, Hounsfield units on CT have greater predictive power, suggesting preoperative workup for long-segment thoracolumbar fusion benefits from computed tomography versus magnetic resonance imaging alone to identify those at increased risk of PJK.

Ventriculoperitoneal Shunt Placement Safety in Idiopathic Normal Pressure Hydrocephalus: Anticoagulated Versus Non-Anticoagulated Patients.

BACKGROUND: Many patients with idiopathic normal pressure hydrocephalus (iNPH) have medical comorbidities requiring anticoagulation that could negatively impact outcomes. This study evaluated the safety of ventriculoperitoneal shunt placement in iNPH patients on systemic anticoagulation versus those not on anticoagulation. METHODS: Patients >60 years of age with iNPH who underwent shunting between 2018 and 2022 were retrospectively reviewed. Baseline demographics, comorbidities (quantified by modified frailty index and Charlson comorbidity index), anticoagulant/antiplatelet agent use (other than aspirin), operative details, and complications were collected. Outcomes of interest were the occurrence of postoperative hemorrhage and overdrainage. RESULTS: A total of 234 patients were included in the study (mean age 75.22 ± 6.04 years; 66.7% male); 36 were on anticoagulation/antiplatelet therapy (excluding aspirin). This included 6 on Warfarin, 19 on direct Xa inhibitors, 10 on Clopidogrel, and 1 on both Clopidogrel and Warfarin. Notably, 70% of patients (164/234) used aspirin alone or combined with anticoagulation or clopidogrel. Baseline modified frailty index was similar between groups, but those on anticoagulant/antiplatelet therapy had a higher mean Charlson comorbidity index (2.67 ± 1.87 vs. 1.75 ± 1.84; P = 0.001). Patients on anticoagulants were more likely to experience tract hemorrhage (11.1 vs. 2.5%; P = 0.03), with no significant difference in the rates of intraventricular hemorrhage or overdrainage-related subdural fluid collection. CONCLUSIONS: Anticoagulant and antiplatelet agents are common in the iNPH population, and patients on these agents experienced higher rates of tract hemorrhage following ventriculoperitoneal shunt placement; however, overall hemorrhagic complication rates were similar.

Predicting the Need for Occipitocervical Fusion for Patients with Lower Clival Chordoma: A Single-Center Retrospective Study.

OBJECTIVE: To assess the impact of tumor extension into the occipital condyle (OC) in lower clival chordoma management and the need for occipito-cervical fusion (OCF). METHODS: A retrospective analysis was conducted on 35 patients with lower clival chordoma. The preoperative area of the intact OCs, Hounsfield units, and the integrity of the apical ligament and the tectorial membrane were assessed using preoperative imaging. RESULTS: Seven (20%) patients were in the OCF group. The OCF group exhibited a higher prevalence of preoperative pain in the neck or head (P = 0.006), ligament absence (P = 0.022), and increased propensity for postoperative wound issues (P = 0.022) than the non-OCF group. The OCF group had less intact OCs (P < 0.001) and higher spinal instability neoplastic score (P = 0.002) than the non-OCF group. All patients with intact OCs < 60% underwent OCF, and those with OCs ≥ 70% were treated without OCF. Those with OCs between 60% and 69% underwent OCF if the ligaments were eroded, and did not undergo OCF if the ligaments were intact. Treatment strategies varied, with endoscopic endonasal approach alone being common. Radiation therapy was administered to 89% of patients. All 3 patients treated with OCF after tumor resection had wound issues; none treated with OCF before resection had wound issues. None developed atlanto-occipital instability. Survival rates did not significantly differ between groups. CONCLUSIONS: In the absence of mobility-related neck pain, patients with lower clival chordoma and intact OC ≥ 60%, intact apical ligament, and intact tectorial membrane, may not require OCF.

Significant Reduction in Bone Density as Measured by Hounsfield Units in Patients with Ankylosing Spondylitis or Diffuse Idiopathic Skeletal Hyperostosis.

Background: Multisegmental pathologic autofusion occurs in patients with ankylosing spondylitis (AS) and diffuse idiopathic skeletal hyperostosis (DISH). It may lead to reduced vertebral bone density due to stress shielding. Methods: This study aimed to determine the effects of autofusion on bone density by measuring Hounsfield units (HU) in the mobile and immobile spinal segments of patients with AS and DISH treated at a tertiary care center. The mean HU was calculated for five distinct regions-cranial adjacent mobile segment, cranial fused segment, mid-construct fused segment, caudal fused segment, and caudal adjacent mobile segment. Means for each region were compared using paired-sample t-tests. Multivariable regression was used to determine independent predictors of mid-fused segment HUs. Results: One hundred patients were included (mean age 76 ± 11 years, 74% male). The mean HU for the mid-construct fused segment (100, 95% CI [86, 113]) was significantly lower than both cranial and caudal fused segments (174 and 108, respectively; both p < 0.001), and cranial and caudal adjacent mobile segments (195 and 115, respectively; both p < 0.001). Multivariable regression showed the mid-construct HUs were predicted by history of smoking (-30 HU, p = 0.009). Conclusions: HUs were significantly reduced in the middle of long-segment autofusion, which was consistent with stress shielding. Such shielding may contribute to the diminution of vertebral bone integrity in AS/DISH patients and potentially increased fracture risk.

The Effect of C2 Muscular Exposure Technique on Radiographic and Clinical Outcomes After C2-T2 Posterior Cervical Fusion.

STUDY DESIGN: Retrospective cohort analysis. OBJECTIVE: To determine whether the C2 exposure technique was a predictor of change in cervical alignment and patient-reported outcomes measures (PROMs) after posterior cervical decompression and fusion (PCDF) for degenerative indications. BACKGROUND: In PCDF handling of the C2 posterior paraspinal musculature during the operative approach varies by surgeon technique. To date, no studies have investigated whether maintenance of the upper cervical semispinalis cervicis attachments as compared with complete reflection of upper cervical paraspinal musculature from the posterior bony elements is associated with superior radiographic and clinical outcomes after PCDF. PATIENTS AND METHODS: All adult patients who underwent C2-T2 PCDF for myelopathy or myeloradiculopathy at multi-institutional academic centers between 2013 and 2020 were retrospectively identified. Patients were dichotomized by the C2 exposure technique into semispinalis preservation or midline muscular reflection groups. Preoperative and short and long-term postoperative radiographic outcomes (upper cervical alignment, global alignment, and fusion status) and PROMs (Visual Analog Scale-Neck, Neck Disability Index, and Short Form-12) were collected. Univariate analysis compared patient factors, radiographic measures, and PROMs across C2 exposure groups. RESULTS: A total of 129 patients met the inclusion/exclusion criteria (73 muscle preservation and 56 muscle reflection). Patients in the muscular preservation group were on average younger (P= 0.005) and more likely to have bone morphogenic protein (P< 0.001) and C2 pars screws (P= 0.006) used during surgery. Preoperative to postoperative changes in C2 slope, C2 tilt, C2-C3 segmental lordosis, C2-C3 listhesis, C0-C2 Cobb angle, proximal junctional kyphosis, ADI, C1 lamina-occiput distance, C2 sagittal vertical axis, C2-C7 lordosis, and PROMs at all follow-up intervals did not vary significantly by C2 exposure technique. Likewise, there were no significant differences in fusion status, C2-C3 pseudoarthrosis, C2 screw loosening, and complication and revision rates between C2 exposure groups. CONCLUSIONS: Preservation of C2 semispinalis attachments versus muscular reflection did not significantly impact cervical alignment, clinical outcomes, or proximal junction complications in long-segment PCDF. LEVEL OF EVIDENCE: Level III.

Injectable bioactive poly(propylene fumarate) and polycaprolactone based click chemistry bone cement for spinal fusion in rabbits.

Degenerative spinal pathology is a widespread medical issue, and spine fusion surgeries are frequently performed. In this study, we fabricated an injectable bioactive click chemistry polymer cement for use in spinal fusion and bone regrowth. Taking advantages of the bioorthogonal click reaction, this cement can be crosslinked by itself eliminating the addition of a toxic initiator or catalyst, nor any external energy sources like UV light or heat. Furthermore, nano-hydroxyapatite (nHA) and microspheres carrying recombinant human bone morphogenetic protein-2 (rhBMP-2) and recombinant human vascular endothelial growth factor (rhVEGF) were used to make the cement bioactive for vascular induction and osteointegration. After implantation into a rabbit posterolateral spinal fusion (PLF) model, the cement showed excellent induction of new bone formation and bridging bone, achieving results comparable to autograft control. This is largely due to the osteogenic properties of nano-hydroxyapatite (nHA) and the released rhBMP-2 and rhVEGF growth factors. Since the availability of autograft sources is limited in clinical settings, this injectable bioactive click chemistry cement may be a promising alternative for spine fusion applications in addressing various spinal conditions.

Decompression Alone Versus Interspinous/Interlaminar Device Placement for Degenerative Lumbar Pathologies: Systematic Review and Meta-Analysis.

INTRODUCTION: Interspinous devices (ISDs) and interlaminar devices (ILDs) are marketed as alternatives to conventional surgery for degenerative lumbar conditions; comparisons with decompression alone are limited. The present study reviews the extant literature comparing the cost and effectiveness of ISDs/ILDs with decompression alone. METHODS: Articles comparing decompression alone with ISD/ILD were identified; outcomes of interest included general and disease-specific patient-reported outcomes, perioperative complications, and total treatment costs. Outcomes were analyzed at <6 weeks, 3 months, 6 months, 1 year, 2 years, and last follow-up. Analyses were performed using random effects modeling. RESULTS: Twenty-nine studies were included in the final analysis. ILD/ISD showed greater leg pain improvement at 3 months (mean difference, -1.43; 95% confidence interval, [-1.78, -1.07]; P < 0.001), 6 months (-0.89; [-1.55, -0.24]; P = 0.008), and 12 months (-0.97; [-1.25, -0.68]; P < 0.001), but not 2 years (P = 0.22) or last follow-up (P = 0.09). Back pain improvement was better after ISD/ILD only at 1 year (-0.87; [-1.62, -0.13]; P = 0.02). Short-Form 36 physical component scores or Zurich Claudication Questionnaire (ZCQ) symptom severity scores did not differ between the groups. ZCQ physical function scores improved more after decompression alone at 6 months (0.35; [0.07, 0.63]; P = 0.01) and 12 months (0.23; [0.00, 0.46]; P = 0.05). Oswestry Disability Index and EuroQoL 5 dimensions scores favored ILD/ISD at all time points except 6 months (P = 0.07). Reoperations (odds ratio, 1.75; [1.23, 2.48]; P = 0.002) and total care costs (standardized mean difference, 1.19; [0.62, 1.77]; P < 0.001) were higher in the ILD/ISD group; complications did not differ significantly between the groups (P = 0.41). CONCLUSIONS: Patient-reported outcomes are similar after decompression alone and ILD/ISD; the observed differences do not reach accepted minimum clinically important difference thresholds. ISD/ILDs have higher associated costs and reoperation rates, suggesting current evidence does not support ILD/ISDs as a cost-effective alternative to decompression alone.

Bioactive Moldable Click Chemistry Polymer Cement with Nano-Hydroxyapatite and Growth Factor-Enhanced Posterolateral Spinal Fusion in a Rabbit Model.

Spinal injuries or diseases necessitate effective fusion solutions, and common clinical approaches involve autografts, allografts, and various bone matrix products, each with limitations. To address these challenges, we developed an innovative moldable click chemistry polymer cement that can be shaped by hand and self-cross-linked in situ for spinal fusion. This self-cross-linking cement, enabled by the bioorthogonal click reaction, excludes the need for toxic initiators or external energy sources. The bioactivity of the cement was promoted by incorporating nanohydroxyapatite and microspheres loaded with recombinant human bone morphogenetic protein-2 and vascular endothelial growth factor, fostering vascular induction and osteointegration. The release kinetics of growth factors, mechanical properties of the cement, and the ability of the scaffold to support in vitro cell proliferation and differentiation were evaluated. In a rabbit posterolateral spinal fusion model, the moldable cement exhibited remarkable induction of bone regeneration and effective bridging of spine vertebral bodies. This bioactive moldable click polymer cement therefore presents a promising biomaterial for spinal fusion augmentation, offering advantages in safety, ease of application, and enhanced bone regrowth.

Biodegradable poly(caprolactone fumarate) 3D printed scaffolds for segmental bone defects within the Masquelet technique.

Segmental bone defects, often clinically treated with nondegradable poly(methylmethacrylate) (PMMA) in multistage surgeries, present a significant clinical challenge. Our study investigated the efficacy of 3D printed biodegradable polycaprolactone fumarate (PCLF)/PCL spacers in a one-stage surgical intervention for these defects, focusing on early bone regeneration influenced by spacer porosities. We compared nonporous PCLF/PCL and PMMA spacers, conventionally molded into cylinders, with porous PCLF/PCL spacers, 3D printed to structurally mimic segmental defects in rat femurs for a 4-week implantation study. Histological analysis, including tissue staining and immunohistochemistry with bone-specific antibodies, was conducted for histomorphometry evaluation. The PCLF/PCL spacers demonstrated compressive properties within 6 ± 0.5 MPa (strength) and 140 ± 15 MPa (modulus). Both porous PCLF/PCL and Nonporous PMMA formed collagen-rich membranes (PCLF/PCL: 92% ± 1.3%, PMMA: 86% ± 1.5%) similar to those induced in the Masquelet technique, indicating PCLF/PCL's potential for one-stage healing. Immunohistochemistry confirmed biomarkers for tissue regeneration, underscoring PCLF/PCL's regenerative capabilities. This research highlights PCLF/PCL scaffolds' ability to induce membrane formation in critical-sized segmental bone defects, supporting their use in one-stage surgery. Both solid and porous PCLF/PCL spacers showed adequate compressive properties, with the porous variants exhibiting BMP-2 expression and woven bone formation, akin to clinical standard PMMA. Notably, the early ossification of the membrane into the pores of porous scaffolds suggests potential for bone interlocking and regeneration, potentially eliminating the need for a second surgery required for PMMA spacers. The biocompatibility and biodegradability of PCLF/PCL make them promising alternatives for treating critical bone defects, especially in vulnerable patient groups.

Randomized Trial of Augmented Pelvic Fixation in Patients Undergoing Thoracolumbar Fusion for Adult Spine Deformity: Initial Results from a Multicenter Randomized Trial.

BACKGROUND: The optimal configuration for spinopelvic fixation during multilevel spine fusion surgery for adult spine deformity remains unclear. Postoperative sacroiliac (SI) joint pain, S2AI screw loosening and implant breakage could be related to continued motion of the SI joint with use of only a single point of fixation across the SI joint. METHODS: Prospective, international, multicenter randomized controlled trial of 222 patients with adult spine deformity scheduled for multilevel (4 or more levels) spine fusion surgery with pelvic fixation. Subjects were randomized to sacroalar (S2) iliac (S2AI) screws alone for pelvic fixation or S2AI + triangular titanium implants placed cephalad to S2AI screws. Quad rod techniques were not allowed or used. Baseline spinal deformity measures were read by an independent radiologist. Site-reported perioperative adverse events were reviewed by a clinical events committee. Quality of life questionnaires and other clinical outcomes are in process with planned 2-year follow-up. RESULTS: One hundred thirteen participants were assigned to S2AI and 109 to S2AI + titanium triangular implants (TTI). 35/222 (16%) of all subjects had a history of SI joint pain or were diagnosed with SI joint pain during preoperative workup. Three-month follow-up was available in all but 4 subjects. TTI placement was successful in 106 of 109 (98%) subjects assigned to TTI. In 2 cases, TTI could not be placed due to anatomical considerations. Three TTI ventral iliac breaches were observed, all of which were managed non-surgically. One TTI subject had a transverse sacral fracture and 1 TTI subject had malposition of the implant requiring removal. CONCLUSIONS: SI joint pain is common in patients with adult spinal deformity who are candidates for multilevel spine fusion surgery. Concurrent placement of TTI parallel to S2AI screws during multilevel spine fusion surgery is feasible and safe. Further follow-up will help to determine the clinical value of this approach to augment pelvic fixation.

Reduced Bone Density Based on Hounsfield Units After Long-Segment Spinal Fusion with Harrington Rods.

BACKGROUND: Long-segment instrumentation, such as Harrington rods, offloads vertebrae within the construct, which may result in significant stress shielding of the fused segments. The present study aimed to determine the effects of spinal fusion on bone density by measuring Hounsfield units (HUs) throughout the spine in patients with a history of Harrington rod fusion. METHODS: Patients with a history of Harrington rod fusion treated at a single academic institution were identified. Mean HUs were calculated at 5 spinal segments for each patient: cranial adjacent mobile segment, cranial fused segment, midconstruct fused segment, caudal fused segment, and caudal adjacent mobile segment. Mean HUs for each level were compared using a paired-sample t test, with statistical significance defined by P < 0.05. Hierarchic multiple regression, including age, gender, body mass index, and time since original fusion, was used to determine predictors of midfused segment HUs. RESULTS: One hundred patients were included (mean age, 55 ± 12 years; 62% female). Mean HUs for the midconstruct fused segment (110; 95% confidence interval [CI], 100-121) were significantly lower than both the cranial and caudal fused segments (150 and 118, respectively; both P < 0.05), as well as both the cranial and caudal adjacent mobile segments (210 and 130, respectively; both P < 0.001). Multivariable regression showed midconstruct HUs were predicted only by patient age (-2.6 HU/year; 95% CI, -3.4 to -1.9; P < 0.001) and time since original surgery (-1.4 HU/year; 95% CI, -2.6 to -0.2; P = 0.02). CONCLUSIONS: HUs were significantly decreased in the middle of previous long-segment fusion constructs, suggesting that multilevel fusion constructs lead to vertebral bone density loss within the construct, potentially from stress shielding.

3D Stem Cell Spheroids with 2D Hetero-Nanostructures for In Vivo Osteogenic and Immunologic Modulated Bone Repair.

3D stem cell spheroids have immense potential for various tissue engineering applications. However, current spheroid fabrication techniques encounter cell viability issues due to limited oxygen access for cells trapped within the core, as well as nonspecific differentiation issues due to the complicated environment following transplantation. In this study, functional 3D spheroids are developed using mesenchymal stem cells with 2D hetero-nanostructures (HNSs) composed of single-stranded DNA (ssDNA) binding carbon nanotubes (sdCNTs) and gelatin-bind black phosphorus nanosheets (gBPNSs). An osteogenic molecule, dexamethasone (DEX), is further loaded to fabricate an sdCNTgBP-DEX HNS. This approach aims to establish a multifunctional cell-inductive 3D spheroid with improved oxygen transportation through hollow nanotubes, stimulated stem cell growth by phosphate ions supplied from BP oxidation, in situ immunoregulation, and osteogenesis induction by DEX molecules after implantation. Initial transplantation of the 3D spheroids in rat calvarial bone defect shows in vivo macrophage shifts to an M2 phenotype, leading to a pro-healing microenvironment for regeneration. Prolonged implantation demonstrates outstanding in vivo neovascularization, osteointegration, and new bone regeneration. Therefore, these engineered 3D spheroids hold great promise for bone repair as they allow for stem cell delivery and provide immunoregulative and osteogenic signals within an all-in-one construct.