Characterization of the virulence, agr typing and antimicrobial resistance profile of Staphylococcus aureus strains isolated from food handlers in Brazil.

Staphylococcus aureus is one of the main pathogens associated with foodborne outbreaks in Brazil and food handlers can carry toxigenic and resistant S. aureus strains. The aims of this study were to verify the frequency of virulence genes, to identify the agr groups and to determine the antimicrobial resistance profile of S. aureus strains isolated from food handlers of pilot kitchens located in São Paulo, Brazil. A total of 74 strains of the Staphylococcus genus were detected and 50% were identified as of the species S. aureus. The enterotoxin genes detection, tst and luk-PV detection, agr typing, mecA detection, ccr complex detection and SCCmec typing were performed using PCR. The antimicrobial resistance testing was performed by the disk diffusion method. The enterotoxin genes were identified in 36 S. aureus, including sea (83.8%). The tst gene was detected in 18.92% of the strains and the luk-PV was detected in only one isolate. Agr typing classified 58.3% of the strains as type I. Seven (18.92%) strains were classified as MRSA and the ccr2 complex was detected in six of these isolates. The SCCmec typing characterized strains as type II, III, IV and V. Moreover, there were also a greater number of resistant strains to penicillin (83.78%) and clarithromycin (67.57%). In conclusion, the study revealed a significant prevalence of S. aureus, and the presence of different virulence genes and a worrying resistance profile in S. aureus strains isolated from food handlers in this country.

Foodborne pathogens in the omics era.

Outbreaks and deaths related to Foodborne Diseases (FBD) occur constantly in the world, as a result of the consumption of contaminated foodstuffs with pathogens such as Listeria monocytogenes, Escherichia coli, Staphylococcus aureus, Salmonella spp, Clostridium spp. and Campylobacter spp. The purpose of this review is to discuss the main omic techniques applied in foodborne pathogen and to demonstrate their functionalities through the food chain and to guarantee the food safety. The main techniques presented are genomic, transcriptomic, secretomic, proteomic, and metabolomic, which together, in the field of food and nutrition, are known as "Foodomics." This review had highlighted the potential of omics to integrate variables that contribute to food safety and to enable us to understand their application on foodborne diseases. The appropriate use of these techniques had driven the definition of critical parameters to achieve successful results in the improvement of consumers health, costs and to obtain safe and high-quality products.

Characterization of the virulence, agr typing and antimicrobial resistance profile of Staphylococcus aureus strains isolated from food handlers in Brazil

Abstract Staphylococcus aureus is one of the main pathogens associated with foodborne outbreaks in Brazil and food handlers can carry toxigenic and resistant S. aureus strains. The aims of this study were to verify the frequency of virulence genes, to identify the agr groups and to determine the antimicrobial resistance profile of S. aureus strains isolated from food handlers of pilot kitchens located in São Paulo, Brazil. A total of 74 strains of the Staphylococcus genus were detected and 50% were identified as of the species S. aureus. The enterotoxin genes detection, tst and luk-PV detection, agr typing, mecA detection, ccr complex detection and SCCmec typing were performed using PCR. The antimicrobial resistance testing was performed by the disk diffusion method. The enterotoxin genes were identified in 36 S. aureus, including sea (83.8%). The tst gene was detected in 18.92% of the strains and the luk-PV was detected in only one isolate. Agr typing classified 58.3% of the strains as type I. Seven (18.92%) strains were classified as MRSA and the ccr2 complex was detected in six of these isolates. The SCCmec typing characterized strains as type II, III, IV and V. Moreover, there were also a greater number of resistant strains to penicillin (83.78%) and clarithromycin (67.57%). In conclusion, the study revealed a significant prevalence of S. aureus, and the presence of different virulence genes and a worrying resistance profile in S. aureus strains isolated from food handlers in this country.

Fractal dimension analysis: A new tool for analyzing colony-forming units.

The gold standard for quantifying bacteria both in routine diagnostics and in research is plating followed by count of colony-forming units (CFU). But, manual CFU counting on plates is time-consuming and subjective. We evaluated fractal dimension as a new methodology for evaluating CFU. Twenty fragments of expanded polytetrafluoroethylene (ePTFE) synthetic vascular prosthesis and 20 silicone prostheses were embedded in bacterial suspensions and incubated. The prostheses were then sown in solid culture medium and incubated for 48 h. Petri dishes were photographed and analyzed by fractal dimension. There was correlation between the number of CFU in manual counting and the fractal dimension analysis (p = 0.0001). We demonstrated that fractal dimension is a useful method for microbiological analyses in researches. It makes CFU analysis easier and faster and can be used regardless of the culture medium.•Petri dishes with different bacterial colonies were photographed with a digital camera under natural light.•The images were binarized and analyzed with ImageJⓇ's "fractal dimension" tool.•Fractal dimension analysis showed to be a good tool for evaluating the amount of colony-forming unit.

Does washing medical devices before and after use decrease bacterial contamination?: An in vitro study.

ABSTRACT: Surface treatment of medical devices may be a way of avoiding the need for replacement of these devices and the comorbidities associated with infection. The aim of this study was to evaluate whether pre- and postcontamination washing of 2 prostheses with different textures can decrease bacterial contamination.The following microorganisms were evaluated: Staphylococcus aureus, Staphylococcus epidermidis, Proteus mirabilis and Enterococcus faecalis. Silicone and expanded polytetrafluoroethylene vascular prostheses were used and divided into 3 groups: prostheses contaminated; prostheses contaminated and treated before contamination; and prostheses contaminated and treated after contamination. Treatments were performed with antibiotic solution, chlorhexidine and lidocaine. After one week of incubation, the prostheses were sown in culture medium, which was incubated for 48 hours. The area of colony formation was evaluated by fractal dimension, an image analysis tool.The antibiotic solution inhibited the growth of S epidermidis and chlorhexidine decrease in 53% the colonization density for S aureus in for both prostheses in the pre-washing. In postcontamination washing, the antibiotic solution inhibited the growth of all bacteria evaluated; there was a 60% decrease in the colonization density of S aureus and absence of colonization for E faecalis with chlorhexidine; and lidocaine inhibited the growth of S aureus in both prostheses.Antibiotic solution showed the highest efficiency in inhibiting bacterial growth, especially for S epidermidis, in both washings. Lidocaine was able to reduce colonization by S aureus in post-contamination washing, showing that it can be used as an alternative adjuvant treatment in these cases.

Prevalence of nasal carriers of methicillin-resistant Staphylococcus aureus in primary health care units in Brazil.

Nasal carriage of Staphylococcus aureus by healthcare workers is of great clinical importance as it facilitates the contamination of medical devices and cross-transmission. However, studies regarding the epidemiology and dissemination of S. aureus and Methicillin-resistant S. aureus (MRSA) within the Primary Health Care in Brazil are scarce. The current study aimed to detect and characterize S. aureus and MRSA strains from the nasal cavities of 63 healthcare working in primary health care units in order to determine the prevalence of S. aureus and MRSA, biofilm formation and resistance profile of these isolates. PCR reactions were performed for detecting mecA, icaA and icaD genes. The phenotypic antimicrobial susceptibility was assessed by the disk diffusion method and biofilm formation by the Congo Red Agar (CRA) method. The MRSA isolates were typed for the Staphylococcal Cassette Chromosome mec (SCCmec). The prevalence of nasal carriage of S. aureus was 74.6%, of which 72.3% were MRSA carrying SCCmec type I (24.4%), III (34.1%), IV (36.6%). Two (4.9%) isolates presented a non-typeable cassette by the performed technique. The antimicrobial susceptibility evaluation evidenced penicillin resistance in 66.1% of S. aureus, erythromycin resistance in 49.2%, while 37.3% were resistant to oxacillin, 28.8% to cefoxitin, 5.1% to levofloxacin and 5.1% to clindamycin. All isolates were biofilm producers and 96.6% of the strains contained the ica biofilm-forming genes (icaA and/or icaD). We have demonstrated a high prevalence of S. aureus and MRSA carriage among health care working in Primary Health Care units, the presence of SCCmec types I, III and IV, in addition to their high ability to form biofilm, factors that possibly contribute to the dissemination and persistence of these pathogens within the primary care services. These observations highlight the importance of broadening the perspective of Health Care-Associated Infections prevention, including all health care levels, which are currently little explored. In addition, the dynamics and resistance mechanisms of S. aureus transmission still need to be further clarified to enable the implementation of more effective prevention measures.

Prevalence of nasal carriers of methicillin-resistant Staphylococcus aureus in primary health care units in Brazil

Nasal carriage of Staphylococcus aureus by healthcare workers is of great clinical importance as it facilitates the contamination of medical devices and cross-transmission. However, studies regarding the epidemiology and dissemination of S. aureus and Methicillin-resistant S. aureus (MRSA) within the Primary Health Care in Brazil are scarce. The current study aimed to detect and characterize S. aureus and MRSA strains from the nasal cavities of 63 healthcare working in primary health care units in order to determine the prevalence of S. aureus and MRSA, biofilm formation and resistance profile of these isolates. PCR reactions were performed for detecting mecA, icaA and icaD genes. The phenotypic antimicrobial susceptibility was assessed by the disk diffusion method and biofilm formation by the Congo Red Agar (CRA) method. The MRSA isolates were typed for the Staphylococcal Cassette Chromosome mec (SCCmec). The prevalence of nasal carriage of S. aureus was 74.6%, of which 72.3% were MRSA carrying SCCmec type I (24.4%), III (34.1%), IV (36.6%). Two (4.9%) isolates presented a non-typeable cassette by the performed technique. The antimicrobial susceptibility evaluation evidenced penicillin resistance in 66.1% of S. aureus, erythromycin resistance in 49.2%, while 37.3% were resistant to oxacillin, 28.8% to cefoxitin, 5.1% to levofloxacin and 5.1% to clindamycin. All isolates were biofilm producers and 96.6% of the strains contained the ica biofilm-forming genes (icaA and/or icaD). We have demonstrated a high prevalence of S. aureus and MRSA carriage among health care working in Primary Health Care units, the presence of SCCmec types I, III and IV, in addition to their high ability to form biofilm, factors that possibly contribute to the dissemination and persistence of these pathogens within the primary care services. These observations highlight the importance of broadening the perspective of Health Care-Associated Infections prevention, including all health care levels, which are currently little explored. In addition, the dynamics and resistance mechanisms of S. aureus transmission still need to be further clarified to enable the implementation of more effective prevention measures.

Effects of consumption of contaminated feed with 2,4-dichlorophenoxyacetic acid (2,4-D) on the rat tibia: analysis by Raman spectroscopy and mechanical properties.

Studies reported the harmful effects of 2,4-D on body tissues, provoking changes in the anatomy and physiology of the kidneys, liver, and testicles. Thus, the objective was to evaluate if there were alterations in the bone quality of the tibia of rats submitted to feed consumption that were exposed to three different 2,4-D doses. Male Wistar rats were divided into four groups: oral control group (C: feed consumption without 2,4-D contamination); low oral concentration group (G3: contaminated feed with low concentration of 2,4-D); medium concentration group (G6: contaminated feed with medium concentration of 2,4-D); and high concentration group (G9: contaminated feed with high concentration of 2,4-D). The results demonstrated alterations of the mechanical properties and Raman ratios of the tibias of the contaminated groups. The maximum load, maximum stress, elastic modulus, and the cortical area were lower in the G6 and G9 compared to C group. The mineral-to-matrix ratio (relative mineral to organic content) was lower in the G6 and G9 groups compared to C group, but carbonate-to-matrix ratio (indicator of bone turnover) was higher in both groups. Thus, it is possible to suggest that the 2,4-D herbicide performed deleterious effects on the bone quality of male Wistar rats.