Single-cell analysis in hypersaline brines predicts a water-activity limit of microbial anabolic activity.

Hypersaline brines provide excellent opportunities to study extreme microbial life. Here, we investigated anabolic activity in nearly 6000 individual cells from solar saltern sites with water activities (aw) ranging from 0.982 to 0.409 (seawater to extreme brine). Average anabolic activity decreased exponentially with aw, with nuanced trends evident at the single-cell level: The proportion of active cells remained high (>50%) even after NaCl saturation, and subsets of cells spiked in activity as aw decreased. Intracommunity heterogeneity in activity increased as seawater transitioned to brine, suggesting increased phenotypic heterogeneity with increased physiological stress. No microbial activity was detected in the 0.409-aw brine (an MgCl2-dominated site) despite the presence of cell-like structures. Extrapolating our data, we predict an aw limit for detectable anabolic activity of 0.540, which is beyond the currently accepted limit of life based on cell division. This work demonstrates the utility of single-cell, metabolism-based techniques for detecting active life and expands the potential habitable space on Earth and beyond.

Spatial variability of aerosol iron mineralogy and oxidation states over the Arctic Ocean.

The mineralogy and oxidation state of aerosol iron (Fe) play important roles in controlling aerosol Fe solubility and consequent bioavailability in seawater. In this study, the spatial variability of Fe mineralogy and oxidation states in aerosols collected during the US GEOTRACES Western Arctic cruise (GN01) were determined using synchrotron-based X-ray absorption near edge structure (XANES) spectroscopy. Both Fe(II) minerals (biotite, ilmenite) and Fe(III) minerals (ferrihydrite, hematite, Fe(III) phosphate) were found in these samples. However, aerosol Fe mineralogy and solubility observed during this cruise varied spatially and can be grouped into three clusters based on the air masses that affected aerosols collected in different regions: (1) biotite-enriched particles (87 % biotite, 13 % hematite) with the air masses passing over Alaska, showing relatively low Fe solubility (4.0 ± 1.7 %); (2) ferrihydrite-enriched particles (82 % ferrihydrite, 18 % ilmenite) collected in the remote Arctic air, showing relatively high Fe solubility (9.6 ± 3.3 %); (3) the fresh dust derived from North America and Siberia, primarily dominated by hematite (41 % hematite, 25 % Fe(III) phosphate, 20 % biotite, 13 % ferrihydrite), showing relatively low Fe solubility (5.1 ± 3.5). A significant positive correlation was found between Fe oxidation state and Fe fractional solubility, suggesting that long-range transport could modify iron (hydr) oxide such as ferrihydrite through atmospheric processing, influencing aerosol Fe solubility and consequently Fe bioavailability in the remote Arctic Ocean.

Zinc K-edge XANES spectroscopy of mineral and organic standards.

Zinc K-edge X-ray absorption near-edge (XANES) spectroscopy was conducted on 40 zinc mineral samples and organic compounds. The K-edge position varied from 9660.5 to 9666.0 eV and a variety of distinctive peaks at higher post-edge energies were exhibited by the materials. Zinc is in the +2 oxidation state in all analyzed materials, thus the variations in edge position and post-edge features reflect changes in zinc coordination. For some minerals, multiple specimens from different localities as well as pure forms from chemical supply companies were examined. These specimens had nearly identical K-edge and post-edge peak positions with only minor variation in the intensity of the post-edge peaks. This suggests that typical compositional variations in natural materials do not strongly affect spectral characteristics. Organic zinc compounds also exhibited a range of edge positions and post-edge features; however, organic compounds with similar zinc coordination structures had nearly identical spectra. Zinc XANES spectral patterns will allow identification of unknown zinc-containing minerals and organic phases in future studies.

Speciation evolution of zinc and copper during pyrolysis and hydrothermal carbonization treatments of sewage sludges.

Thermal and hydrothermal treatments are promising techniques for sewage sludge management that can potentially facilitate safe waste disposal, energy recovery, and nutrient recovery/recycling. Content and speciation of heavy metals in the treatment products affect the potential environmental risks upon sludge disposal and/or application of the treatment products. Therefore, it is important to study the speciation transformation of heavy metals and the effects of treatment conditions. By combining synchrotron X-ray spectroscopy/microscopy analysis and sequential chemical extraction, this study systematically characterized the speciation of Zn and Cu in municipal sewage sludges and their chars derived from pyrolysis (a representative thermal treatment technique) and hydrothermal carbonization (HTC; a representative hydrothermal treatment technique). Spectroscopy analysis revealed enhanced sulfidation of Zn and Cu by anaerobic digestion and HTC treatments, as compared to desulfidation by pyrolysis. Overall, changes in the chemical speciation and matrix properties led to reduced mobility of Zn and Cu in the treatment products. These results provide insights into the reaction mechanisms during pyrolysis and HTC treatments of sludges and can help evaluate the environmental/health risks associated with the metals in the treatment products.

Influence of Atmospheric Processes on the Solubility and Composition of Iron in Saharan Dust.

Aerosol iron was examined in Saharan dust plumes using a combination of iron near-edge X-ray absorption spectroscopy and wet-chemical techniques. Aerosol samples were collected at three sites located in the Mediterranean, the Atlantic, and Bermuda to characterize iron at different atmospheric transport lengths and time scales. Iron(III) oxides were a component of aerosols at all sampling sites and dominated the aerosol iron in Mediterranean samples. In Atlantic samples, iron(II and III) sulfate, iron(III) phosphate, and iron(II) silicates were also contributors to aerosol composition. With increased atmospheric transport time, iron(II) sulfates are found to become more abundant, aerosol iron oxidation state became more reduced, and aerosol acidity increased. Atmospheric processing including acidic reactions and photoreduction likely influence the form of iron minerals and oxidation state in Saharan dust aerosols and contribute to increases in aerosol-iron solubility.

Characterization of selenium in ambient aerosols and primary emission sources.

Atmospheric selenium (Se) in aerosols was investigated using X-ray absorption near-edge structure (XANES) spectroscopy and X-ray fluorescence (XRF) microscopy. These techniques were used to determine the oxidation state and elemental associations of Se in common primary emission sources and ambient aerosols collected from the greater Atlanta area. In the majority of ambient aerosol and primary emission source samples, the spectroscopic patterns as well as the absence of elemental correlations suggest Se is in an elemental, organic, or oxide form. XRF microscopy revealed numerous Se-rich particles, or hotspots, accounting on average for ∼16% of the total Se in ambient aerosols. Hotspots contained primarily Se(0)/Se(-II). However, larger, bulk spectroscopic characterizations revealed Se(IV) as the dominant oxidation state in ambient aerosol, followed by Se(0)/Se(-II) and Se(VI). Se(IV) was the only observed oxidation state in gasoline, diesel, and coal fly ash, while biomass burning contained a combination of Se(0)/Se(-II) and Se(IV). Although the majority of Se in aerosols was in the most toxic form, the Se concentration is well below the California Environmental Protection Agency chronic exposure limit (∼20000 ng/m(3)).

Role of biogenic silica in the removal of iron from the Antarctic seas.

Iron has a key role in controlling biological production in the Southern Ocean, yet the mechanisms regulating iron availability in this and other ocean regions are not completely understood. Here, based on analysis of living phytoplankton in the coastal seas of West Antarctica, we present a new pathway for iron removal from marine systems involving structural incorporation of reduced, organic iron into biogenic silica. Export of iron incorporated into biogenic silica may represent a substantial unaccounted loss of iron from marine systems. For example, in the Ross Sea, burial of iron incorporated into biogenic silica is conservatively estimated as 11 µmol m⁻² per year, which is in the same range as the major bioavailable iron inputs to this region. As a major sink of bioavailable iron, incorporation of iron into biogenic silica may shift microbial population structure towards taxa with relatively lower iron requirements, and may reduce ecosystem productivity and associated carbon sequestration.

Phosphorus K-edge XANES spectroscopy of mineral standards.

Phosphorus K-edge X-ray absorption near-edge structure (XANES) spectroscopy was performed on phosphate mineral specimens including (a) twelve specimens from the apatite group covering a range of compositional variation and crystallinity; (b) six non-apatite calcium-rich phosphate minerals; (c) 15 aluminium-rich phosphate minerals; (d) ten phosphate minerals rich in either reduced iron or manganese; (e) four phosphate minerals rich in either oxidized iron or manganese; (f) eight phosphate minerals rich in either magnesium, copper, lead, zinc or rare-earth elements; and (g) four uranium phosphate minerals. The identity of all minerals examined in this study was independently confirmed using X-ray powder diffraction. Minerals were distinguished using XANES spectra with a combination of pre-edge features, edge position, peak shapes and post-edge features. Shared spectral features were observed in minerals with compositions dominated by the same specific cation. Analyses of apatite-group minerals indicate that XANES spectral patterns are not strongly affected by variations in composition and crystallinity typical of natural mineral specimens.

Fluorometric quantification of natural inorganic polyphosphate.

Polyphosphate, a linear polymer of orthophosphate, is abundant in the environment and a key component in wastewater treatment and many bioremediation processes. Despite the broad relevance of polyphosphate, current methods to quantify it possess significant disadvantages. Here, we describe a new approach for the direct quantification of inorganic polyphosphate in complex natural samples. The protocol relies on the interaction between the fluorochrome 4',6-diamidino-2-phenylindole (DAPI) and dissolved polyphosphate. With the DAPI-based approach we describe, polyphosphate can be quantified at concentrations ranging from 0.5-3 microM P in a neutral-buffered freshwater matrix with an accuracy of +/-0.03 microM P. The patterns of polyphosphate concentration versus fluorescence yielded by standards exhibit no chain length dependence across polyphosphates ranging from 15-130 phosphorus units in size. Shorter length polyphosphate molecules (e.g., polyphosphate of three and five phosphorus units in length) contribute little to no signal in this approach, as these molecules react only slightly or not at all with DAPI in the concentration range tested. The presence of salt suppresses fluorescence from intermediate polyphosphate chain lengths (e.g., 15 phosphorus units) at polyphosphate concentrations ranging from 0.5-3 microM P. For longer chain lengths (e.g., 45-130 phosphorus units), this salt interference is not evident at conductivities up to approximately 10mS/cm. Our results indicate that standard polyphosphates should be stored frozen for no longer than 10-15 days to avoid inconsistent results associated with standard degradation. We have applied the fluorometric protocol to the analysis of five well-characterized natural samples to demonstrate the use of the method.

Characterization of water-soluble organic carbon in urban atmospheric aerosols using solid-state 13C NMR spectroscopy.

Solid-state 13C nuclear magnetic resonance (NMR) spectroscopy has been used to investigate the distribution of carbon functional groups in urban Atlanta aerosol fine (PM2.5) particles. Carbonaceous aerosol particles comprise a significant fraction of the ambient particle mass and are environmentally significant as they may influence radiative and cloud-nucleating properties and can also produce adverse health effects upon inhalation. The water-soluble organic carbon (WSOC) fraction was extracted from multiple 24 h integrated high-volume quartz filter samples and further separated into recovered hydrophobic and hydrophilic fractions using an approach similar to that used to extract humic and fulvic acids from aqueous samples. Solid-state 13C NMR results indicate that WSOC in urban atmospheric aerosol particles is mostly aliphatic in nature (approximately 95% by C mass) with major contributions from alkyl and oxygenated alkyls (approximately 80%), carboxylic acid (approximately 10%), and aromatic functional groups (approximately 4%). The aromatic C is associated with the recovered hydrophobic fraction of WSOC. These spectra have been compared to the 13C NMR results obtained from Suwannee River humic acid and a fractionated biomass burning sample. WSOC, and more importantly, its recovered hydrophobic fraction, is found to be only qualitatively similar to aqueous humic material. The biomass burning sample is significantly different from urban Atlanta WSOC and is composed of substantial amounts of sugar derivatives and phenolic compounds, as expected. The NMR results demonstrate the potential of this technique to investigate aerosol WSOC composition and to study its variations with changes in parameters such aerosol sources.

Selective attentional bias for pain-related stimuli amongst pain fearful individuals.

Recent research indicates that people who are fearful of pain tend to report more negative pain experiences. It also seems that attentional mechanisms may be particularly important in the perception of painful stimuli, especially amongst pain fearful individuals. Drawing on a paradigm used to examine biased cognitive processes in the emotional disorders, the current study investigated whether the fear of pain would be related to a greater selective attentional bias in favour of pain-related stimuli. In order to determine the nature of this bias, stimuli material were varied in terms of whether they were related to pain sensations, were related to socially threatening situations or were relatively positive. Those with a high fear of pain exhibited a selective attentional bias towards pain-related information, compared to those classified as low in the fear of pain. No group differences were found for either social threat or positive stimuli. These results indicate that one reason why those with a high fear of pain are particularly susceptible to negative pain experiences could be due to biased attentional processes. Suggestions for cognitive interventions designed to reduce such biases are discussed, as are directions for future research.

Avoidance versus focused attention and the perception of pain: differential effects for men and women.

The aim of the current investigation was to compare the effects of two different attentional strategies (focused vs. avoidance) on how males and females respond to experimentally induced pain. One hundred healthy adults were instructed to either attend towards or away from cold pressor pain. Measures of pain tolerance, pain threshold and recovery were taken, as were self-report measures of sensory and affective pain experiences. As expected, gender was found to moderate tolerance to pain: males were found to be more tolerant to cold pressor pain than females. With respect to the self-report measures, males reported less sensory pain when they attended toward the pain than when they avoided it. However, a similar effect was not found in women, suggesting that attentional focusing may only be a useful strategy for males. These results are discussed in light of previous research.