Sono-assisted adsorption of Cristal Violet dye onto Tunisian Smectite Clay: Characterization, kinetics and adsorption isotherms.

The present work describes the removal of Crystal violet from aqueous solution by Sono-assisted adsorption on Raw Tunisian Smectite Clay (RSC). This material was purified by dispersion in water and extraction of the fraction with a particle size smaller than 2 µm. the resulting material was characterized by XRD, TEM, BET, surface area and pore volume measurements. Batch studies were carried out to investigate the effect of experimental factors such as contact time (0-60 min), pH (2.5-11), adsorbent dose (0.05-0.3 g/L), and initial dye concentration (12.5-100 mg/L) on the Sono-assisted adsorption of Crystal violet dye. Adsorption kinetics was well fitted by pseudo-second order kinetic model. Langmuir (R2 = 0.988), Freundlich (R2 = 0.968), Langmuir-Freundlich (R2 = 0.997) and Toth (R2 = 0.999) isotherms were fitted to describe the equilibrium of Crystal violet Sono-assisted adsorption process. The results suggested that Natural Tunisian Smectite Clay is suitable as a sorbent material for Sono-assisted adsorption of Crystal violet dye from aqueous solutions.

Heavy metals transfer in the olive tree and assessment of food contamination risk.

Due to constraints of fresh water for agricultural irrigation, wastewater was used for irrigation of agricultural land as alternative water resources in arid and semi-arid Tunisian regions. However, long-term irrigation may cause contamination by heavy metals in the soil as well as for crops, thus becoming a threat to humans. To understand the effect of irrigation with wastewater on the concentrations of heavy metals Cr, Cu, Mn, Zn, and Pb, in soil and plants, soil samples and plants were collected and analyzed. Results have shown that all soil samples do not exhibit extreme values. The content of heavy metals in the surface layer (0-30 cm) is much higher than that in depth. Overall, the concentrations of Mn, Pb, Cu, Cr, and Zn in soil were found to be lower than the authorized national safety limits. Moreover, the content in both parts of forage crops have not exceeded the WHO standard. For olive trees, no negative values were found in the different organs, which was also true for the extracted oil. An exception happened for the oils produced from fallen olives in direct contact with the wastewater and the soil. Therefore, to ensure food security and wastewater use for irrigation, monitoring and control of pollution is required. Graphical abstract Biomass production from treated wastewater without risk.

Adsorption of terpenic compounds onto organo-palygorskite.

Essential oils from aromatic plants are currently mentioned as suitable tools for excellent protection of stored grains from insect pest attacks. The present work aimed to study the processes of the synthesis insecticidal formulation with clay. The active terpenic compounds of essential oil of Eucalyptus globulus (Eg) were fixed in the palygorskite by adsorption process. Two sample types of palygorskites were used: raw and organo-palygorskite. The palygorskite clays were characterized by different physicochemical techniques including X-ray diffraction (XRD), Fourier transform infrared (FTIR) analyses, thermogravimetric analysis (TG), differential thermal analysis (DTA), Brunauer-Emmet-Teller (BET), and scanning electron microscope (SEM). Results reveal that the raw clay has a fibrous structure with impurities essential calcite. These structures and physicochemical properties of raw palygorskite and organo-palygorskite give it the potential of material adsorbent. Results show that the adsorption capacity strongly depends on affinity between terpenic compounds and organic cations rather than on interlayer distance of organo-palygorskite. The highest adsorption capacity of terpenic compounds is acquired with palygorskite interlaced by didodecyldimethylammonium bromide (DDDMA). These results validated the potential utility of the Paly-DDDMA as adsorbent fibrous clay for the retention of terpenic compounds in application of environmental preservation.

Modelling the adsorption of mercury onto natural and aluminium pillared clays.

INTRODUCTION: The removal of heavy metals by natural adsorbent has become one of the most attractive solutions for environmental remediation. Natural clay collected from the Late Cretaceous Aleg formation, Tunisia was used as a natural adsorbent for the removal of Hg(II) in aqueous system. METHODS: Physicochemical characterization of the adsorbent was carried out with the aid of various techniques, including chemical analysis, X-ray diffraction, Fourier transform infrared and scanning electron micrograph. Batch sorption technique was selected as an appropriate technique in the current study. Method parameters, including pH, temperature, initial metal concentration and contact time, were varied in order to quantitatively evaluate their effects on Hg(II) adsorption onto the original and pillared clay samples. Adsorption kinetic was studied by fitting the experimental results to the pseudo-first-order and pseudo-second-order kinetic models. The adsorption data were also simulated with Langmuir, Freundlich and Temkin isotherms. RESULTS: Results showed that the natural clay samples are mainly composed of silica, alumina, iron, calcium and magnesium oxides. The sorbents are mainly mesoporous materials with specific surface area of <250 m(2) g(-1). From the adsorption of Hg(II) studies, experimental data demonstrated a high degree of fitness to the pseudo-second-order kinetics with an equilibration time of 240 min. The equilibrium data showed the best model fit to Langmuir model with the maximum adsorption capacities of 9.70 and 49.75 mg g(-1) for the original and aluminium pillared clays, respectively. The maximum adsorption of Hg(II) on the aluminium pillared clay was observed to occur at pH 3.2. The calculated thermodynamic parameters (∆G°, ∆H° and ∆S°) showed an exothermic adsorption process. The entropy values varied between 60.77 and 117.59 J mol(-1) K(-1), and those of enthalpy ranged from 16.31 to 30.77 kJ mol(-1). The equilibrium parameter (R (L)) indicated that the adsorption of Hg(II) on Tunisian smectitic clays was favourable under the experimental conditions of this study. CONCLUSION: The clay of the Aleg formation, Tunisia was found to be an efficient adsorbent for Hg(II) removal in aqueous systems.

Efficiency of natural and acid-activated clays in the removal of Pb(II) from aqueous solutions.

The adsorption of Pb(2+) ions onto Tunisian clay in aqueous solution was studied in a batch system. Four samples of clay (RGC, RRC, AGC, and ARC) were used. The raw RGC and RRC clays were sampled in jebel Tejera-Esghira in Medenine area (Southeast of Tunisia). AGC and ARC corresponds respectively to RGC and RRC activated by 6M sulphuric acid. The adsorbents employed were characterized by X-Ray Diffraction, chemical analysis, and the specific surface area was also estimated. The ability of clay samples to remove Pb(2+) ions from aqueous solutions has been studied at different operating conditions: temperature and pH. The optimum pH for lead ions retention was found 7.0 for the four clay samples. The effect of temperature on adsorption phenomenon was also investigated. The results indicated that adsorption is an exothermic process for lead ions removal. The equilibrium adsorption data were analysed using the Langmuir and Freundlich isotherms. The adsorption capacities (X(m)) for RRC, RGC, ARC and AGC were found 17.84, 25.44, 27.15 and 40.75 mg g(-1), respectively. The performance of the red clay after activation was compared to that of silica gel, which has maximum adsorption of 20 mg g(-1). On the other hand, although the performance of activated carbon (88.3 mg g(-1)) is by far higher than that of the green clay after activation, the latter seems to have better performance than that of the silica gel.