Effect of Acidic Media on Surface Topography and Color Stability of Two Different Glass Ceramics.

OBJECTIVE: The aim of this study was to determine the effect of two acidic beverages (orange juice and H3PO4-containing fizzy drink) on the surface topography and color stability of two commonly used computer-aided design/computer-aided manufacturing (CAD/CAM) ceramic materials. MATERIALS AND METHODS: Sixty samples of two CAD/CAM ceramic materials, lithium disilicate (IPS e-max CAD) and zirconia reinforced lithium silicate (Vita Suprinity), were prepared according to the manufacturer's instructions. The samples were immersed in one of three media (artificial saliva, orange juice and H3PO4-containing fizzy drink) and then stored in an incubator at 37 °C for 24 hours). Before and after immersion in different media, the surface roughness (Ra) of the samples was assessed using profilometer (JITAI8101 Surface Roughness Tester-Beijing Jitai Tech Detection Device Co. Ltd, China) and the color parameters were measured using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). Surface topography was observed using scanning electron microscope (SEM) and surface mineral content was compared before and after immersion. Paired sample t-test was used to determine the change in Ra before and after immersion. Two-way analysis of variance was used to determine the effect of different CAD/CAM materials and immersion media on the mean ∆Ra and mean ∆E of the studied groups. Tukey's honest significant difference posthoc test was used for multiple comparisons at a level of significance (α = 0.05). RESULTS: A significant increase in Ra and a decrease in the color stability of the two investigated ceramic materials were detected after immersion in the acidic media than in artificial saliva. SEM and energy-dispersive X-ray results revealed the dissolution of the glassy matrix and the exposure of silicate crystals. CONCLUSION: The surface topography and color stability of glass ceramics are affected by the pH of different acidic media.

A systematic review and meta-analysis of the impact of resveratrol on oral cancer: potential therapeutic implications.

The present study aimed to investigate the impact of resveratrol on oral neoplastic parameters through a systematic review and meta-analysis. Resveratrol, a naturally occurring polyphenol, has shown promising potential as a therapeutic agent in various cancer types, including oral neoplasms. Understanding the collective findings from existing studies can shed light on the efficacy and mechanisms of resveratrol in oral cancer management. The systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive search was performed to identify relevant studies from various databases, registers, websites, and citation searches. The inclusion criteria encompassed in-vivo studies investigating the impact of resveratrol on oral neoplastic parameters in animal models. After screening and assessment, a total of five eligible studies were included in the meta-analysis. The meta-analysis of the selected studies revealed that resveratrol treatment exhibited a potential impact on reducing oral neoplastic proliferation and promoting neoplastic apoptosis. The combined analysis showed a statistically significant decrease in neoplastic parameters with an overall effect size (ES) of 0.85 (95% CI: [0.74, 0.98]). Subgroup analyses were conducted to explore potential variations among different cellular types and exposure compounds, providing further insights into the efficacy of resveratrol in specific contexts. This systematic review and meta-analysis support the potential of resveratrol as a promising therapeutic agent in oral cancer management. The findings indicate that resveratrol may effectively modulate neoplastic proliferation and apoptosis in various cellular types within animal models of oral cancer. However, further well-controlled studies and clinical trials are warranted to validate these observations and elucidate the underlying mechanisms of resveratrol's actions. Resveratrol holds promise as a complementary therapeutic approach in the prevention and treatment of oral neoplastic conditions.

Surface Properties and Wear Resistance of Injectable and Computer-Aided Design/Computer Aided Manufacturing-Milled Resin Composite Thin Occlusal Veneers.

OBJECTIVES: This study was conducted to investigate the microhardness, surface roughness (Ra), and wear behavior of thin occlusal veneers (TOV) fabricated from different injectable composite materials and compare them to a Computer-Aided Design (CAD)/Computer-Aided Manufacturing (CAM) resin-based material. MATERIALS AND METHODS: A 1-mm occusal veneer preparation was done in a mandibular right second molar typodont tooth. The prepared model was duplicated to fabricate 32 replicas and divided into four groups (n = 8). Standard TOV were fabricated either indirectly from Cerasmart blocks, Cerasmart, GC (CS), or directly from Beautifil Injectable X, Shofu (BF), G-ænial Universal injectable, GC (GU), or SonicFill 2, Kerr (SF) using the injection molding technique. All the specimens were subjected to both thermomechanical cyclic loading (TMC) in a chewing simulator. Wear measurement was conducted by three-dimensional (3D) scanning of the veneered models before and after TMC, and the difference in the volume of the sample was recorded as the volumetric material loss due to wear. Ra before and after TMC and Vickers microhardness (VHN) of the tested materials were measured using standardized samples (n = 8). Representative samples from each group were investigated under a stereomicroscope and a scanning electron microscope. STATISTICAL ANALYSIS: One-way analysis of variance (ANOVA) was applied to detect the effect of material on VHN and wear. Two-way ANOVA was utilized to examine the impact of material and TMC on Ra. Multiple comparisons between the groups were conducted using Tukey's post hoc test (α = 0.05). The Pearson's correlation coefficient was used to determine the relationship between hardness and wear and between roughness and wear (α = 0.05). RESULTS: CS exhibited the highest mean VHN (p ≤ 0.001), followed by GU and SF which were statistically similar (p = 0.883) but significantly higher than BF (p < 0.001). After TMC, GU revealed the lowest Ra and volumetric wear (VW), followed by CS, BF, and SF (p < 0.5). A highly significant correlation existed between Ra and VW (p = 0.001, R 2 = 0.9803). CONCLUSION: The effect of TMC on the surface properties and wear resistance of the investigated TOV is material-dependent. GU injectable TOV are less influenced by TMC than CS milled TOV. In contrast, BF and SF demonstrated significant VW and Ra which might limit their clinical use as TOV.

Influence of Low-Level Laser Modification and Adhesive Application Mode on the Bonding Efficiency of Universal Adhesives to Er:YAG Laser-Ablated Dentin.

Introduction: Erbium laser ablation as a method of tooth preparation and conditioning has shown promising results. Although previous studies have adopted various combinations of different laser parameters and several dentin adhesive systems, very few have investigated combining high-level and low-level ER:YAG lasers with Universal adhesives. This study aimed to assess the impact of using low-energy irradiation on the surface micro-topography and shear bond strength (SBS) of universal adhesive (UA) to the erbium:yttrium-aluminum-garnet (Er:YAG) laser-ablated dentin substrate, bonded in etch-and-rinse or self-etch adhesive mode. Methods: Eighty-seven extracted molars were sectioned to expose flat occlusal dentin surface; 60 teeth were divided equally into three groups according to the surface treatment; bur-cutting (B), Er:YAG high-energy laser cutting (L1 - 200 mJ, 20 Hz, 50 µs pulse), or L1 followed by low-energy laser modification (L1 /L2 - 80 mJ, 10 Hz, 50 µs pulse). Then each group was equally divided into two groups (n=10) according to the mode of application of the universal adhesive; either etch-and-rinse (ER) or self-etching (SE). The samples were subjected to thermocycling (5000 cycle between 5°C and 55°C), and SBS was tested. Two-way ANOVA and Tukey post hoc test were used to analyze the results. The remaining 27 samples were used to investigate the effect of the treatment on the topography of the treated dentin surfaces using a scanning electron microscope (SEM). Results: B/SE recorded the highest SBS (25.48 ± 2.6 MPa) followed by B/ER (23.20 ± 6.8 MPa) and L1 /L2 /SE (22.94 ± 4.1 MPa) and with no statistically significant difference between these groups (P >0.05). The lowest SBS results (P <0.05) were recorded for L1/SE (12.22 ± 3 MPa). No statistical differences were found between the SBS of L1 /L2 /ER and L1 /ER groups or between the SBS of L1 /L2 / ER and L1 /L2 /SE groups. Conclusion: A subsequent treatment of the Er:YAG laser-ablated dentin with low-energy laser modification mode (LMM) enhances the SBS of the tested UA when applied in SE mode.

Pediatric dental emergency management and parental treatment preferences during COVID-19 pandemic as compared to 2019.

Pediatric dental emergency management were temporarily suspended during the COVID-19 pandemic, which worsened urgent dental needs. This retrospective study investigated the management of pediatric emergencies during COVID-19 lockdown and the trends in parental preferences from March to July in 2019 and 2020. Pediatric dental emergencies managed during pandemic was collated, procedures were categorized (emergency, restorative, preventive, elective) and trends in parental treatment preference was compared from March-July 2019/2020. Bivariate analysis was performed using fisher-exact test and statistical significance was set at 5%. Total 1081 children were treated during COVID-19 lockdown, and 1509 procedures were performed, of which 20.8% were emergency, 42% restorative, 24.4% preventive, 12.6% elective. In 2019, 7462 children were treated; and except for emergency (10.6%), other procedures were comparable to 2020. Extractions (267) predominated in 2020 followed by sealants (195); but in 2019, pulectomy (1268), scaling (1251) were predominant. None of the residents who performed aerosol procedures got infected with COVID-19 during the lockdown. Emergency dental needs among pediatric patients were very high during the COVID-19 pandemic in South India, and there was not much change in the trend in parental treatment preference in 2019 and 2020. Further, aerosol procedures did not increase the risk of COVID-19 during the pandemic provided proper universal precautions were followed.

In Vitro Enamel Remineralization Efficacy of Calcium Silicate-Sodium Phosphate-Fluoride Salts versus NovaMin Bioactive Glass, Following Tooth Whitening.

OBJECTIVES: This study aimed to evaluate the effect of in-office bleaching on the enamel surface and the efficacy of calcium silicate-sodium phosphate-fluoride salt (CS) and NovaMin bioactive glass (NM) dentifrice in remineralizing bleached enamel. MATERIALS AND METHODS: Forty extracted premolars were sectioned mesio-distally, and the facial and lingual enamel were flattened and polished. The samples were equally divided into nonbleached and bleached with 38% hydrogen peroxide (HP). Each group was further divided according to the remineralization protocol (n = 10); no remineralization treatment (nontreated), CS, or NM, applied for 3 minutes two times/day for 7 days, or CS combined with NR-5 boosting serum (CS+NR-5) applied for 3 minutes once/day for 3 days. The average Knoop hardness number (KHN) and surface roughness (utilizing atomic force microscopy) were measured. Surface topography/elemental analysis was analyzed by using scanning electron microscopy/energy dispersive X-ray analysis. All the tests were performed at baseline, after bleaching, and following each remineralization protocol. Data were statistically analyzed by two-way analysis of variance and Bonferroni post hoc multiple comparison tests (α = 0.05). RESULTS: HP significantly reduced KHN and increased roughness (p < 0.05). All remineralization materials increased the hardness and reduced the surface roughness after bleaching except NM, which demonstrated significantly increased roughness (p < 0.05). Ca/P ratio decreased after bleaching (p < 0.05), and following treatment, CS and CS+NR-5 exhibited higher remineralization capacity in comparison to NM (p < 0.05). CONCLUSION: Although none of the material tested was able to reverse the negative effect of high-concentration in-office HP on enamel completely, the remineralization efficacy of CS and CS+NR-5 was superior to that of NM.

Acceptability of silver diamine fluoride as interim measure towards untreated dental caries and its impact on ohrqol among children with HIV: Pilot study.

BACKGROUND: Children with HIV are a special group with limited access to care and high prevalence of dental caries. Silver Diamine Fluoride (SDF) is approved universally for the management of asymptomatic carious lesions but research on the psychological impact of black staining is scarce. AIMS: Effect of silver diamine fluoride (SDF) application as an interim caries management on the child's oral health-related quality of life of children with HIV over a period of 4 months until definitive care was provided. SETTINGS AND DESIGN: A pilot study conducted among children with HIV in a care home. It was a pilot trial to check the acceptability of SDF among these children. METHODS AND MATERIAL: Forty-two children (12.3 ± 3.5 years) participated in this pilot study. Prevalence of caries (DMFT), candidiasis, gingival inflammation, and cervical lymphadenitis was evaluated. OHRQoL inventory (COHIP-SF) was completed by the students at baseline, immediately, 4 months after SDF application. STATISTICAL ANALYSIS USED: One-way ANOVA with post hoc Tukey HSD test. RESULTS AND CONCLUSION: Poor oral hygiene was universal and mean DMFT was 3.2 ± 2.5. OHRQoL was not significantly affected at baseline (26.2 ± 6.4), but immediately following SDF application, OHRQoL was significantly poor (48.7 ± 8.2), remained poor even after 4 months (42.6 ± 6.1). Emotional wellbeing was significantly impacted negatively following SDF application (p < 0.001); whereas oral health, functional wellbeing dimensions were not impacted. SDF should be used with caution among special children as the black discoloration of the teeth can cause emotional trauma and negatively impacting their OHRQoL while trying to improve the same.