Alginate copper oxide nano-biocomposite as a novel material for amperometric glucose biosensing.

A novel amperometric glucose biosensor based on alginate-CuO nano-biocomposite and glucose oxidase (GOD) film was developed and characterized. The properties of the alginate-CuO-GOD film were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Amperometric measurements were employed to characterize the analytical performance of the biosensor. Several parameters including amount of alginate, concentration of GOD and cross-linkers, amount of CuO nanoparticles, and effect of pH were studied and optimized. Under optimal conditions, the developed alginate-CuO-GOD biosensor was shown to have two linear ranges; from 0.04mM to 3mM (with a correlation coefficient of 0.9996 and the sensitivity of 30.443µAmM-1cm-2) and from 4mM to 35mM (with a correlation coefficient of 0.9994 and the sensitivity of 7.205µAmM-1cm-2). The overall detection limit was estimated to be 1.6µM (signal-to-noise ratio of 3) and the Km value of 2.82mM. The biosensor exhibited rather good performance with long-term stability (remainder of activity is 78% after 15days) and significant specificity for glucose when compared to possible interfering molecules such as ascorbic acid, uric acid and acetaminophen.

Evaluation of protein immobilization capacity on various carbon nanotube embedded hydrogel biomaterials.

This study investigates effective immobilization of proteins, an important procedure in many fields of bioengineering and medicine, using various biomaterials. Gelatin, alginate and chitosan were chosen as polymeric carriers, and applied in both their composites and nanocomposite forms in combination with carbon nanotubes (CNTs). The prepared nano/composite structures were characterized using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TG) and contact angle analysis (CA). Electrochemical impedance spectroscopy analysis revealed gelatin composites in general to exhibit better immobilization performance relative to the native gelatin which can be attributed to enhanced film morphologies of the composite structures. Moreover, superior immobilization efficiencies were obtained with the addition of carbon nanotubes, due to their conducting and surface enhancement features, especially in the gelatin-chitosan structures due to the presence of structural active groups.

A novel carboxymethylcellulose-gelatin-titanium dioxide-superoxide dismutase biosensor; electrochemical properties of carboxymethylcellulose-gelatin-titanium dioxide-superoxide dismutase.

A novel highly sensitive electrochemical carboxymethylcellulose-gelatin-TiO(2)-superoxide dismutase biosensor for the determination of O(2)(•-) was developed. The biosensor exhibits high analytical performance with a wide linear range (1.5 nM to 2 mM), low detection limit (1.5 nM), high sensitivity and low response time (1.8s). The electron transfer of superoxide dismutase was first accomplished at the carboxymethylcellulose-gelatin-Pt and carboxymethylcellulose-gelatin-TiO(2)-Pt surface. The electron transfer between superoxide dismutase and the carboxymethylcellulose-gelatin-Pt wihout Fe(CN)(6)(4-/3-) and carboxymethylcellulose-gelatin-Pt, carboxymethylcellulose-gelatin-TiO(2)-Pt with Fe(CN)(6)(4-/3-) is quasireversible with a formal potential of 200 mV, 207 mV, and 200 mV vs Ag|AgCl respectively. The anodic (ks(a)) and cathodic (ks(c)) electron transfer rate constants and the anodic (α(a)) and cathodic (α(c)) transfer coefficients were evaluated: ks(a)=6.15 s(-1), α(a)=0.79, and ks(c)=1.48 s(-1) α(c)=0.19 for carboxymethylcellulose-superoxide dismutase without Fe(CN)(6)(4-/3-), ks(a)=6.77 s(-1), α(a)=0.87, and ks(c)=1 s(-1) α(c)=0.13 for carboxymethylcellulose-superoxide dismutase with Fe(CN)(6)(4-/3-), ks(a)=6.85 s(-1), α(a)=0.88, and ks(c)=0.76 s(-1) α(c)=0.1 carboxymethylcellulose-gelatin-TiO(2)-superoxide dismutase. The electron transfer rate between superoxide dismutase and the Pt electrode is remarkably enhanced due to immobilizing superoxide dismutase in carboxymethylcellulose-gelatin and TiO(2) nanoparticles tend to act like nanoscale electrodes.

Carboxymethylcellulose-gelatin-superoxidase dismutase electrode for amperometric superoxide radical sensing.

A novel, highly sensitive superoxide dismutase biosensor for the direct and simultaneous determination of superoxide radicals was developed by immobilization of superoxide dismutase within carboxymethylcellulose-gelatin on a Pt electrode surface. The parameters affecting the performance of the biosensor were investigated. The response of the CMC-G-SOD biosensor was proportional to O (2) (·-) concentration and the detection limit was 1.25 × 10(-3) mM with a correlation coefficient of 0.9994. The developed biosensor exhibited high analytical performance with wider linear range, high sensitivity and low response time. The biosensor retained 89.8% of its sensitivity after use for 80 days. The support system enhanced the immobilization of superoxide dismutase and promoted the electron transfer of superoxide dismutase minimizing its fouling effect. The biosensor was quite effective not only in detecting O (2) (·-) , but also in determining the antioxidant properties of acetylsalicylic acid-based drugs and the anti-radical activity of healthy and cancerous human brain tissues.