Diverse Proton-Conducting Nanotubes via a Tandem Macrocyclization and Assembly Strategy.

Macrocycles that assemble into nanotubes exhibit emergent properties stemming from their low dimensionality, structural regularity, and distinct interior environments. We report a versatile strategy to synthesize diverse nanotube structures in a single, efficient reaction by using a conserved building block bearing a pyridine ring. Imine condensation of a 2,4,6-triphenylpyridine-based diamine with various aromatic dialdehydes yields chemically distinct pentagonal [5 + 5], hexagonal [3 + 3], and diamond-shaped [2 + 2] macrocycles depending on the substitution pattern of the aromatic dialdehyde monomer. Atomic force microscopy and in solvo X-ray diffraction demonstrate that protonation of the macrocycles under the mild conditions used for their synthesis drives assembly into high-aspect ratio nanotubes. Each of the pyridine-containing nanotube assemblies exhibited measurable proton conductivity by electrochemical impedance spectroscopy, with values as high as 10-3 S m-1 (90% R.H., 25 °C) that we attribute to differences in their internal pore sizes. This synthetic strategy represents a general method to access robust nanotube assemblies from a universal pyridine-containing monomer, which will enable systematic investigations of their emergent properties.

Photon Upconversion in a Glowing Metal-Organic Framework.

The interaction of low-energy light with matter that leads to the production of high-energy light is known as photon upconversion. This phenomenon is of importance because of its potential applications in optoelectronics, energy harvesting, and the biomedical arena. Herein, we report a pillared-paddlewheel metal-organic framework (MOF), constructed from a tetrakis(4-carboxyphenyl)porphyrin sensitizer and a dipyridyl thiazolothiazole annihilator, designed for efficient triplet-triplet annihilation upconversion (TTA-UC). Single-crystal X-ray diffraction studies reveal that the Zn-metalated sensitizers are coordinated to Zn2 nodes in a paddlewheel fashion, forming 2D sheets, to which are linked annihilators, such that each sensitizer is connected to five of them. The precise arrangements of sensitizers with respect to annihilators, and the high annihilator-to-sensitizer ratio, facilitate Dexter energy transfer. This level of organization in an extended structure leads to a high TTA-UC efficiency of 1.95% (theoretical maximum = 50%) at an excitation power density of 25 mW cm-2.

Supramolecular Porous Organic Nanocomposites for Heterogeneous Photocatalysis of a Sulfur Mustard Simulant.

Efficient heterogeneous photosensitizing materials require both large accessible surface areas and excitons of suitable energies and with well-defined spin structures. Confinement of the tetracationic cyclophane (ExBox4+ ) within a nonporous anionic polystyrene sulfonate (PSS) matrix leads to a surface area increase of up to 225 m2 g-1 in ExBox•PSS. Efficient intersystem crossing is achieved by combining the spin-orbit coupling associated to Br heavy atoms in 1,3,5,8-tetrabromopyrene (TBP), and the photoinduced electron transfer in a TBP⊂ExBox4+ supramolecular dyad. The TBP⊂ExBox4+ complex displays a charge transfer band at 450 nm and an exciplex emission at 520 nm, indicating the formation of new mixed-electronic states. The lowest triplet state (T1 , 1.89 eV) is localized on the TBP and is close in energy with the charge separated state (CT, 2.14 eV). The homogeneous and heterogeneous photocatalytic activities of the TBP⊂ExBox4+ , for the elimination of a sulfur mustard simulant, has proved to be significantly more efficient than TBP and ExBox+4 , confirming the importance of the newly formed excited-state manifold in TBP⊂ExBox4+ for the population of the low-lying T1 state. The high stability, facile preparation, and high performance of the TBP⊂ExBox•PSS nanocomposites augur well for the future development of new supramolecular heterogeneous photosensitizers using host-guest chemistry.

p-Substituted Tris(2-pyridylmethyl)amines as Ligands for Highly Active ATRP Catalysts: Facile Synthesis and Characterization.

A facile and efficient two-step synthesis of p-substituted tris(2-pyridylmethyl)amine (TPMA) ligands to form Cu complexes with the highest activity to date in atom transfer radical polymerization (ATRP) is presented. In the divergent synthesis, p-Cl substituents in tris(4-chloro-2-pyridylmethyl)amine (TPMA3Cl ) were replaced in one step and high yield by electron-donating cyclic amines (pyrrolidine (TPMAPYR ), piperidine (TPMAPIP ), and morpholine (TPMAMOR )) by nucleophilic aromatic substitution. The [CuII (TPMANR2 )Br]+ complexes exhibited larger energy gaps between frontier molecular orbitals and >0.2 V more negative reduction potentials than [CuII (TPMA)Br]+ , indicating >3 orders of magnitude higher ATRP activity. [CuI (TPMAPYR )]+ exhibited the highest reported activity for Br-capped acrylate chain ends in DMF, and moderate activity toward C-F bonds at room temperature. ATRP of n-butyl acrylate using only 10-25 part per million loadings of [CuII (TPMANR2 )Br]+ exhibited excellent control.

XCage: A Tricyclic Octacationic Receptor for Perylene Diimide with Picomolar Affinity in Water.

The rational design of wholly synthetic receptors that bind active substrates with ultrahigh affinities is a challenging goal, especially in water. Here, we report the synthesis of a tricyclic octacationic cyclophane, which exhibits complementary stereoelectronic binding toward a widely used fluorescent dye, perylene diimide, with picomolar affinity in water. The ultrahigh binding affinity is sustained by a large and rigid hydrophobic binding surface, which provides a highly favorable enthalpy and a slightly positive entropy of complexation. The receptor-substrate complex shows significant improvement in optical properties, including red-shifted absorption and emission, turn-on fluorescence, and efficient energy transfer. An unusual single-excitation, dual-emission, imaging study of living cells was performed by taking advantage of a large pseudo-Stokes shift, produced by the efficient energy transfer.

Nanoparticle physicochemical properties determine the activation of intracellular complement.

The complement system plays an essential role in both innate and adaptive immunity. The traditional understanding of this system comes from studies investigating complement proteins produced by the liver and present in plasma to "complement" the immune cell-mediated response to invading pathogens. Recently, it has been reported that immune cells including, but not limited to, T-cells and monocytes, express complement proteins. This complement is referred to as intracellular (IC) and implicated in the regulation of T-cell activation. The mechanisms and the structure-activity relationship between nanomaterials and IC, however, are currently unknown. Herein, we describe a structure-activity relationship study demonstrating that under in vitro conditions, only polymeric materials with cationic surfaces activate IC in T-cells. The effect also depends on particle size and occurs through a mechanism involving membrane damage, thereby IC on the cell surface serves as a self-opsonization marker in response to the nanoparticle-triggered danger affecting the cell integrity.

Enzymatically Degassed Surface-Initiated Atom Transfer Radical Polymerization with Real-Time Monitoring.

Polymer brush coatings are frequently prepared by radical polymerization, a notoriously oxygen sensitive process. Glucose oxidase (GOx) can inexpensively enable radical polymerization in solution by enzymatically consuming oxygen as it oxidizes glucose. Here, we report the growth of polymeric brushes using GOx-assisted atom transfer radical polymerization (ATRP) from a surface while open to air. Specifically, we grew a set of biomedically relevant polymer brushes, including poly(oligo(ethylene glycol) methacrylate) (POEGMA), poly(2-dimethylaminoethyl methacrylate) (PDMAEMA), poly(sulfobetaine methacrylate) (PSBMA), and poly(2-(methylsulfinyl)ethyl acrylate (PMSEA). For each of these polymers, we monitored GOx-assisted and GOx-free ATRP reaction kinetics in real time using quartz crystal microbalance (QCM) and verified findings with localized surface plasmon resonance (LSPR). We modeled brush growth kinetics considering bimolecular termination. This model fit our data well ( r2 > 0.987 for all samples) and shows the addition of GOx increased effective kinetic chain lengths, propagation rates, and reproducibility. We tested the antifouling properties of the polymer brush coatings against human blood plasma and were surprised to find that coatings prepared with GOx repelled more plasma proteins in all cases than their GOx-free counterparts.

Preparation of Well-Defined Polymers and DNA-Polymer Bioconjugates via Small-Volume eATRP in the Presence of Air.

An aqueous electrochemically mediated atom transfer radical polymerization (eATRP) was performed in a small volume solution (75 µL) deposited on a screen-printed electrode (SPE). The reaction was open to air, thanks to the use of glucose oxidase (GOx) as an oxygen scavenger. Well-defined poly(2-(methylsulfinyl)ethyl acrylate) (PMSEA), poly(oligo(ethylene oxide) methyl ether methacrylate) (POEOMA), and corresponding DNA-polymer biohybrids were synthesized by the small-volume eATRP at room temperature. The reactions were simplified and polymerization rates increased by the application of the enzyme deoxygenating system and the compact electrochemical setup. Importantly, the volume of polymerization mixture was lowered to microliters, which not only decreases the cost for each reaction, but can also be potentially implemented in combinatorial chemistry and electrode-array configurations for high-throughput systems.

Biocatalytic "Oxygen-Fueled" Atom Transfer Radical Polymerization.

Atom transfer radical polymerization (ATRP) can be carried out in a flask completely open to air using a biocatalytic system composed of glucose oxidase (GOx) and horseradish peroxidase (HRP) with an active copper catalyst complex. Nanomolar concentrations of the enzymes and ppm amounts of Cu provided excellent control over the polymerization of oligo(ethylene oxide) methyl ether methacrylate (OEOMA500 ), generating polymers with high molecular weight (Mn >70 000) and low dispersities (1.13≤D≤1.27) in less than an hour. The continuous oxygen supply was necessary for the generation of radicals and polymer chain growth as demonstrated by temporal control and by inducing hypoxic conditions. In addition, the enzymatic cascade polymerization triggered by oxygen was used for a protein and DNA functionalized with initiators to form protein-b-POEOMA and DNA-b-POEOMA bioconjugates, respectively.

Synthesis of Polymer Bioconjugates via Photoinduced Atom Transfer Radical Polymerization under Blue Light Irradiation.

A rapid blue-light-induced atom transfer radical polymerization (ATRP) was conducted in a biologically friendly environment. Well-controlled polymerization of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) was successfully performed in aqueous media (1X PBS) under irradiation by blue LED strips. With 10.0 mW/cm2 intensity output at 450 nm, >90% conversion was achieved in 2 h in the presence of a system comprising glucose, glucose oxidase, and sodium pyruvate. Poly-(OEOMA) was synthesized with predetermined M n and low dispersities using low ppm of Cu catalysts. Importantly, secondary structures of proteins, as analyzed by circular dichroism (CD), were preserved under blue-light irradiation due to its lower energy output. The aqueous blue-light ATRP technique was applied to biological systems by synthesizing well-defined protein-polymer and DNA-polymer hybrids by the "grafting-from" method.

A Breathing Atom-Transfer Radical Polymerization: Fully Oxygen-Tolerant Polymerization Inspired by Aerobic Respiration of Cells.

The first well-controlled aqueous atom-transfer radical polymerization (ATRP) conducted in the open air is reported. This air-tolerant ATRP was enabled by the continuous conversion of oxygen to carbon dioxide catalyzed by glucose oxidase (GOx), in the presence of glucose and sodium pyruvate as sequential sacrificial substrates. Controlled polymerization using initiators for continuous activator regeneration (ICAR) ATRP of oligo(ethylene oxide) methyl ether methacrylate (OEOMA, Mn =500) yielded polymers with low dispersity (1.09≤D≤1.29) and molecular weights (MWs) close to theoretical values in the presence of pyruvate. Without added pyruvates, lower MWs were observed due to generation of new chains by H2 O2 formed by reaction of O2 with GOx. Successful chain extension of POEOMA500 macroinitiator with OEOMA300 (D≤1.3) and Bovine Serum Albumin bioconjugates (D≤1.22) confirmed a well-controlled polymerization. The reactions in the open air in larger scale (25 mL) were also successful.

Ultrasonication-Induced Aqueous Atom Transfer Radical Polymerization.

A new procedure for ultrasonication-induced atom transfer radical polymerization (sono-ATRP) in aqueous media was developed. Polymerizations of oligo(ethylene oxide) methyl ether methacrylate (OEOMA) and 2-hydroxyethyl acrylate (HEA) in water were successfully carried out in the presence of ppm amounts of CuBr2 catalyst and tris(2-pyridylmethyl)amine ligand when exposed to ultrasonication (40 kHz, 110 W) at room temperature. Aqueous sono-ATRP enabled polymerization of water-soluble monomers with excellent control over the molecular weight, dispersity, and high retention of chain-end functionality. Temporal control over the polymer chain growth was demonstrated by switching the ultrasound on/off due to the regeneration of activators by hydroxyl radicals formed by ultrasonication. The synthesis of a well-defined block copolymer and DNA-polymer biohybrid was also successful using this process.

Correction: Facile synthesis of stable, water soluble, dendron-coated gold nanoparticles.

Correction for 'Facile synthesis of stable, water soluble, dendron-coated gold nanoparticles' by Alan E. Enciso, et al., Nanoscale, 2017, 9, 3128-3132.

Facile synthesis of stable, water soluble, dendron-coated gold nanoparticles.

Upon reduction with sodium borohydride, diazonium tetrachloroaurate salts of triazine dendrons yield dendron-coated gold nanoparticles connected by a gold-carbon bond. These robust nanoparticles are stable in water and toluene solutions for longer than one year and present surface groups that can be reacted to change surface chemistry and manipulate solubility. Molecular modeling was used to provide insight on the hydration of the nanoparticles and their observed solubilties.

Thermoregulated Coacervation, Metal-Encapsulation and Nanoparticle Synthesis in Novel Triazine Dendrimers.

The synthesis and solubility behaviors of four generation five (G5) triazine dendrimers are studied. While the underivatized cationic dendrimer is soluble in water, the acetylated and propanoylated derivatives undergo coacervation in water upon increasing temperature. Occurring around room temperature, this behavior is related to a liquid-liquid phase transition with a lower critical solution temperature (LCST) and is explained by differences in composition, notably, the hydrophobic nature of the terminal groups. Interestingly, the water solubility of the acetylated dendrimer is affected by the addition of selected metal ions. Titrating solutions of acetylated dendrimer at temperatures below the LCST with gold or palladium ions promoted precipitation, but platinum, iridium, and copper did not. Gold nanoparticles having diameters of 2.5 ± 0.8 nm can be obtained from solutions of the acetylated dendrimer at concentrations of gold less than that required to induce precipitation by treating the solution with sodium borohydride.

Nanoparticle Effects on Human Platelets in Vitro: A Comparison between PAMAM and Triazine Dendrimers.

Triazine and PAMAM dendrimers of similar size and number of cationic surface groups were compared for their ability to promote platelet aggregation. Triazine dendrimers (G3, G5 and G7) varied in molecular weight from 8 kDa-130 kDa and in surface groups 16-256. PAMAM dendrimers selected for comparison included G3 (7 kDa, 32 surface groups) and G6 (58 kDa, 256 surface groups). The treatment of human platelet-rich plasma (PRP) with low generation triazine dendrimers (0.01-1 µM) did not show any significant effect in human platelet aggregation in vitro; however, the treatment of PRP with larger generations promotes an effective aggregation. These results are in agreement with studies performed with PAMAM dendrimers, where large generations promote aggregation. Triazine dendrimers promote aggregation less aggressively than PAMAM dendrimers, a factor attributed to differences in cationic charge or the formation of supramolecular assemblies of dendrimers.

Computational design principles for the discovery of bioactive dendrimers: [s]-triazines and other examples.

INTRODUCTION: Chemistry yields dendrimers of many classes and compositions. Translating this synthetic success to bioactivity is significantly aided by the use of computational modeling and our knowledge of the three-dimensional shapes of these macromolecules. AREAS COVERED: This review discusses the lessons learned during the investigations of [s]-triazine dendrimers. Specifically, the article focuses on the evolving role that computational models have taken in the exploration of these macromolecules. These lessons, furthermore, can be generalized across many dendrimer classes. EXPERT OPINION: Computational models and the resulting structural data from molecular dynamics simulations provide insights into: shape, solvent penetration, shielding of biolabile linkers, and the density of hydrophobic patches. These models have evolved from artistic representations, through bases for rationalization, to hypothesis-generating tools that drive synthesis. With further advances expected in both software and hardware the answer to the question, 'What does a specific dendrimer look like in solution?' is becoming increasingly clear. Moreover, the authors believe that answer to this question lies at the heart of the design of bioactive dendrimers.

Dendrimers terminated with dichlorotriazine groups provide a route to compositional diversity.

Triazine dendrimers terminated with either four or eight dichlorotriazines can be prepared in high yields by reacting an amine-terminated dendrimer with cyanuric chloride. These materials exist as white powders and are stable to storage at room temperature. Sequential nucleophilic aromatic substitution with two different amine nucleophiles yields compounds that display the desired compositional diversity. Reaction conditions for the substitution were developed using a model dichlorotriazine with amine nucleophiles at -20, 0, and 25 °C. Selective substitution is favored at lower temperatures and with more nucleophilic amine groups.