RESUMO
We describe a portable diode-laser-based sensor for NH(3) detection using vibrational overtone absorption spectroscopy at 1.53 mum. Use of fiber-coupled optical elements makes such a trace gas sensor rugged and easy to align. On-line data acquisition and processing requiring <30 s can be performed with a laptop PC running LabVIEW software. The gas sensor was used primarily for NH(3) concentration measurements with a sensitivity of 0.7 parts per million (signal-to-noise ratio of 3) over a two-week period in a bioreactor being developed at the NASA Johnson Space Center for water treatment technologies to support long-duration space missions. The feasibility of simultaneous, real-time measurements of NH(3) and CO(2) concentrations is also reported.
RESUMO
Measurements of NH(3) and CO(2) were made in bioreactor vent gases with distributed-feedback diode-laser sensors operating near 2 mum. Calculated spectra of NH(3) and CO(2) were used to determine the optimum transitions for interrogating with an absorption sensor. For ammonia, a strong and isolated absorption transition at 5016.977 cm(-1) was selected for trace gas monitoring. For CO(2), an isolated transition at 5007.787 cm(-1) was selected to measure widely varying concentrations [500 parts per million (ppm) to 10%], with sufficient signal for low mole fractions and without being optically thick for high mole fractions. Using direct absorption and a 36-m total path-length multipass flow-through cell, we achieved a minimum detectivity of 0.25 ppm for NH(3) and 40 ppm for CO(2). We report on the quasi-continuous field measurements of NH(3) and CO(2) concentration in bioreactor vent gases that were recorded at NASA Johnson Space Center with a portable and automated sensor system over a 45-h data collection window.
