Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 19 de 19
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Mater Sci Eng C Mater Biol Appl ; 37: 113-9, 2014 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-24582230

RESUMO

A new, simple, and disposable molecularly imprinted electrochemical sensor for the determination of ranitidine was developed on pencil graphite electrode (PGE) via cyclic voltammetry (CV). The PGEs were coated with MWCNTs containing the carboxylic functional group (f-MWCNTs), imprinted with sol-gel and Au nanoparticle (AuNPs) layers (AuNP/MIP-sol-gel/f-MWCNT/PGE), respectively, to enhance the electrode's electrical transmission and sensitivity. The thin film of molecularly imprinted sol-gel polymers with specific binding sites for ranitidine was cast on modified PGE by electrochemical deposition. The AuNP/MIP-sol-gel/f-MWCNT/PGE thus developed was characterized by electrochemical impedance spectroscopy (EIS) and CV. The interaction between the imprinted sensor and the target molecule was also observed on the electrode by measuring the current response of 5.0mMK3[Fe(CN)6] solution as an electrochemical probe. The pick currents of ranitidine increased linearly with concentration in the ranges of 0.05 to 2.0µM, with a detection limit of (S/N=3) 0.02µM. Finally, the modified electrode was successfully employed to determine ranitidine in human urine samples.


Assuntos
Antiulcerosos/urina , Técnicas Eletroquímicas , Géis/química , Grafite/química , Nanopartículas Metálicas/química , Nanotubos de Carbono/química , Ranitidina/urina , Urinálise/instrumentação , Urinálise/métodos , Eletrodos , Ouro/química , Humanos , Concentração de Íons de Hidrogênio , Impressão Molecular
2.
Colloids Surf B Biointerfaces ; 104: 186-93, 2013 Apr 01.
Artigo em Inglês | MEDLINE | ID: mdl-23314609

RESUMO

A novel electrochemical sensor for the simultaneous determination of glutathione (GSH) and nicotinamide adenine dinucleotide (NADH) is described. The sensor is based on a carbon paste electrode (CPE) modified with benzamide derivative and multiwall carbon nanotubes. This mixture makes a modified electrode that is sensitive for the electrochemical detection of these compounds. Under optimum conditions and at pH 7.0, oxidation of GSH occurs at a potential of about 330 mV less positive than that at an unmodified CPE. The voltammetric peak currents are linearly dependent on GSH and NADH concentrations in the ranges 0.09-300 µmol L(-1) GSH and 5.0-600 µmol L(-1) NADH. The detection limits found for GSH and NADH were 0.05 µmol L(-1) and 1.0 µmol L(-1), respectively. The electrochemical sensor was also used for the determination of GSH in urine, pharmaceutical and hemolysed erythrocyte samples.


Assuntos
Técnicas Eletroquímicas/métodos , Glutationa/análise , NAD/química , Nanotubos de Carbono/química , Técnicas Eletroquímicas/instrumentação , Eletrodos , Propriedades de Superfície
3.
Luminescence ; 27(5): 390-7, 2012.
Artigo em Inglês | MEDLINE | ID: mdl-22025250

RESUMO

Colloidals solution of Fe3 O4 magnetic nanoparticles (MNPs), capped with ß-cyclodextrins (ß-CD) as inclusion complexes, were found to enhance the chemiluminescence (CL) intensity of the luminol-diperiodatoargentate(III) (DPA) system. On injection of cysteine into the luminol-DPA-ß-CD-Fe3 O4 MNPs inclusion complexes system, the CL intensity is strongly enhanced. The enhanced CL signal is ascribed to the catalytic effect of Fe3 O4 MNPs capped with ß-CD, which is assumed to stabilize the CL intermediate. Based on these findings, a rapid and sensitive assay was developed for the determination of cysteine in human serum. The effects of analytical variables on the CL signal were studied and optimized. Under the optimum conditions, the CL intensity was directly proportional to the concentration of cysteine in the range 8.0 × 10(-9) -1.0 × 10(-6) mol/L. The detection limit was 2.8 × 10(-9) mol/L (3 S(b) /m) and the relative standard deviation (RSD) for 10 replicate determinations of 1.0 × 10(-7) mol/L cysteine was 3.5%. The proposed method was applied to the sensitive determination of cysteine in human serum samples, and compared with the Ellman method with satisfactory results.


Assuntos
Cisteína/sangue , Compostos Férricos/química , Medições Luminescentes/métodos , Luminol/química , Nanopartículas/química , Prata/química , beta-Ciclodextrinas/química , Humanos , Limite de Detecção , Medições Luminescentes/instrumentação
4.
Colloids Surf B Biointerfaces ; 87(2): 480-8, 2011 Oct 15.
Artigo em Inglês | MEDLINE | ID: mdl-21726986

RESUMO

A new catechol-derivative compound, N-(3,4-dihydroxyphenethyl)-3,5-dinitrobenzamide, was synthesized and used to construct a modified-carbon nanotubes paste electrode. The electro-oxidation of captopril at the surface of the modified electrode was studied using cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy. Under the optimized conditions, the differential pulse voltammetric peak current of captopril increased linearly with captopril concentration in the ranges of 6.4×10(-8) to 3.2×10(-48) mol L(-1). The detection limit was 3.4×10(-8) mol L(-1) captopril. The diffusion coefficient and kinetic parameters (such as electron transfer coefficient and the heterogeneous rate constant) for captopril oxidation were also determined. The RSD% for 0.5 and 10.0 µmol L(-1) captopril were 2.1% and 1.6%, respectively. The proposed sensor was successfully applied for the determination of captopril in human patient urine and tablet samples.


Assuntos
Anti-Hipertensivos/urina , Benzamidas/química , Captopril/urina , Catecóis/química , Eletroquímica/métodos , Anti-Hipertensivos/uso terapêutico , Benzamidas/metabolismo , Captopril/uso terapêutico , Catálise , Catecóis/metabolismo , Espectroscopia Dielétrica , Eletrodos , Humanos , Hipertensão/tratamento farmacológico , Hipertensão/fisiopatologia , Cinética , Nanotubos de Carbono/química , Oxirredução , Potenciometria , Sensibilidade e Especificidade
5.
J Pharm Biomed Anal ; 48(1): 140-4, 2008 Sep 10.
Artigo em Inglês | MEDLINE | ID: mdl-18550315

RESUMO

In this work, a new sensitive method is introduced for analysis of glutathione at trace levels in blood samples. The method is based on the effect of glutathione on the chemiluminescence signal of the oxidation of luminol by sodium periodate in basic solution. The influence of chemical and manifold variables on the sensitivity was studied. At the optimized conditions, the linear range for the determination of glutathione was 1.0x10(-8) to 1.0x10(-5) mol L(-1) with the detection limit (3sigma) of 8x10(-9) mol L(-1). The relative standard deviation for 10 repeated measurements of 1.0x10(-6) mol L(-1) of glutathione was 4%. The results of the method were compared with the Ellman reference method and no significant difference was found. The influence of potential interference substances on the determination of glutathione was studied. The proposed method was applied successfully for the determination of glutathione in real samples such as erythrocyte hemolysed in normal subjects and diabetes.


Assuntos
Eritrócitos/química , Glutationa/sangue , Luminescência , Medições Luminescentes/métodos , Análise de Injeção de Fluxo/instrumentação , Análise de Injeção de Fluxo/métodos , Hemólise , Humanos , Luminol/química , Ácido Periódico/química , Sensibilidade e Especificidade
6.
J Mol Graph Model ; 25(1): 46-54, 2006 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-16337156

RESUMO

A wavelet neural network (WNN) model in quantitative structure property relationship (QSPR) was developed for predicting solubility of 25 anthraquinone dyes in supercritical carbon dioxide over a wide range of pressures (70-770 bar) and temperatures (291-423 K). A large number of descriptors were calculated with Dragon software and a subset of calculated descriptors was selected from 18 classes of Dragon descriptors with a stepwise multiple linear regression (MLR) as a feature selection technique. Six calculated and two experimental descriptors, pressure and temperature, were selected as the most feasible descriptors. The selected descriptors were used as input nodes in a wavelet neural network (WNN) model. The wavelet neural network architecture and its parameters were optimized simultaneously. The data was randomly divided to the training, prediction and validation sets. The predictive ability of the model was evaluated using validation data set. The root mean squares error (RMSE) and mean absolute errors were 0.339 and 0.221, respectively, for the validation data set. The performance of the WNN model was also compared with artificial neural network (ANN) model and the results showed the superiority of the WNN over ANN model.


Assuntos
Antraquinonas/química , Corantes/química , Modelos Químicos , Redes Neurais de Computação , Relação Quantitativa Estrutura-Atividade , Dióxido de Carbono/química , Modelos Moleculares , Pressão , Solubilidade , Temperatura
7.
Anal Sci ; 17(5): 609-12, 2001 May.
Artigo em Inglês | MEDLINE | ID: mdl-11708141

RESUMO

Copper(II) was selectively accumulated on a hanging mercury-drop electrode by using 2-mercaptobenzimidazole. Ensuing measurements were carried out by differential pulse adsorption stripping voltammetry. Factors affecting the accumulation, reduction, and stripping steps were investigated and a procedure was developed. The optimum conditions for the analysis of copper were pH 5.0, 5.33 x 10(-5) M 2-mercaptobenzimidazole and an accumulation potential of -0.10 V (vs. Av/AgCl). A linear range was obtained in the concentration range 0.2-100 ng/ml with a 90 s accumulation time and a scan rate of 16 mV/s. For ten successive determinations of 1.0, 20.0 and 70.0 ng/ml copper(II), relative standard deviations of 4.2, 3.5 and 2.8%, respectively, were obtained. The developed method was applied to the determination of copper in commercial salts and aluminium alloys.

8.
Spectrochim Acta A Mol Biomol Spectrosc ; 57(9): 1739-43, 2001 Aug.
Artigo em Inglês | MEDLINE | ID: mdl-11506024

RESUMO

A sensitive, rapid and selective procedure is proposed for the flow injection determinations of periodate by spectrofluorometric detection. The method is based on the reaction of periodate with Alizarin Navy Blue in basic solution. The reagents and manifold variables influence on the sensitivity have been investigated and the optimum conditions are established. Periodate can be determined for the range of 0.250-5.00 microg ml(-1) with a limit of detection of 0.08 microg ml(-1), and with a sample rate of 15 +/- 2 samples h(-1). The relative standard deviations for eight replicate determination of 0.500 and 5.00 microg ml(-1) was 1.3 and 1.1%, respectively. Periodate can be determined in the presence of iodate and bromate. The proposed method was used to determination of periodate in water samples.


Assuntos
Análise de Injeção de Fluxo/métodos , Ácido Periódico/análise , Espectrometria de Fluorescência/métodos , Antraquinonas/química , Corantes/química , Análise de Injeção de Fluxo/instrumentação , Concentração de Íons de Hidrogênio , Soluções/química , Temperatura , Água/química
9.
Artigo em Inglês | MEDLINE | ID: mdl-11506034

RESUMO

A new catalytic kinetic spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between safranine and dichromate in dilute sulfuric acid media. The reaction is monitored photometrically by measuring the decrease in absorbance of safranine at the maximum wavelength of 530 nm. Under the optimum conditions, a calibration graph from 0.10 to 10.00 microg ml(-1) of oxalic acid with a detection limit of 0.08 microg ml(-1) was obtained. The relative standard deviation (R.S.D.) for ten replicate measurements of 1.0 and 5.0 microg ml(-1) oxalic acid was 2.7 and 2.5%, respectively. The purposed method is simple, sensitive, selective and inexpensive. The applicability of the proposed method was determined by the determination of oxalic acid in spinach and wastewater samples with satisfactory results.


Assuntos
Ácido Oxálico/análise , Fenazinas/química , Dicromato de Potássio/química , Espectrofotometria/métodos , Calibragem , Catálise , Ácido Oxálico/química , Oxirredução , Sensibilidade e Especificidade , Spinacia oleracea/química , Ácidos Sulfúricos/química , Temperatura
10.
Talanta ; 55(4): 715-20, 2001 Oct 31.
Artigo em Inglês | MEDLINE | ID: mdl-18968418

RESUMO

A sensitive and selective method has been introduced for the determination of ultra trace amounts of Ru(III) based on its catalytic effects on the oxidation of Brilliant green (BG) by sodium bromate. A flow injection method has been used with spectrophotometric detection. The method is based on measuring the decrease in absorbance of BG at lambda(max)=615 nm. The decrease in absorbance of BG is linear with the concentration range of 0.005-0.500 mug ml(-1) Ru(III). The limit of detection is 0.002 mug ml(-1). The influence of reagent concentration, manifold parameter and potential interference species has been investigated. The method was used for the determination of ruthenium in synthetic samples with satisfactory results.

11.
Anal Sci ; 17(2): 327-31, 2001 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-11990550

RESUMO

Alpha-benzilmonoxime has been used for the extraction and determination of cobalt at microgram amount. The reagent reacts with cobalt(II) in the pH range of 8.8 - 9.3 to form a yellow-color chelate, which is extracted in chloroform, toluene, and some other non-polar solvents. The chelate is stable in chloroform for about one day. Under the optimum conditions of the a-benzilmonoxime concentration and pH of 9.0, Beer's law was obeyed in the concentration range of 0.08 - 2.2 microg/ml cobalt. The molar absorptivity of the extracted species was 2.55 x 10(4) dm3/mol cm at 380 nm, with a detection limit of 0.01 microg/ml cobalt. Relative standard deviations of 0.4, 0.8 and 2.3% were found for the determination of cobalt concentrations of 2.2, 1.1 and 0.08 microg/ml, respectively. The effect of diverse ions on the determination of 1.00 microg/ml of cobalt has been studied. The method was applied to the determination of cobalt in vitamin B12 and B-complex ampoules, a Co2O3-Co3O4 laboratory chemical mixture and some synthetic alloy samples. The method is sensitive, simple, rapid and accurate.

12.
Spectrochim Acta A Mol Biomol Spectrosc ; 56A(8): 1583-8, 2000 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-10907887

RESUMO

A new flow injection catalytic method was described for the determination of ruthenium(III) based on its catalytic effect on the oxidation of brilliant cresyl blue (BCB) by periodate in acidic media. The reaction was followed spectrophotometrically by measuring the absorbance of the dye at 635 nm. Under optimum conditions, ruthenium can be determined in the range of 1.0-100.0 ng ml(-1) with a relative standard deviation of 1.1% and with a limit of detection of 0.70 ng ml(-1). The influence of reagent and manifold variables were studied and optimized. The method was tested for the determination of ruthenium(III) in some synthetic mixtures.


Assuntos
Rutênio/análise , Calibragem , Catálise , Ácido Clorídrico/química , Indicadores e Reagentes , Oxazinas/química , Reprodutibilidade dos Testes , Espectrofotometria/métodos , Temperatura
13.
Fresenius J Anal Chem ; 367(6): 590-2, 2000 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-11225837

RESUMO

A new simple, sensitive and rapid catalytic-spectrophotometric method for the determination of oxalic acid has been described based on its catalytic effect on the redox reaction between dichromate and Brilliant cresyl blue in acidic media by means of a flow injection analysis method. The color change of Brilliant cresyl blue due to its oxidation was monitored spectrophotometrically at 625 nm. The calibration graph was linear in the range of 0.020-4.70 microg/mL oxalic acid with a limit of detection 0.005 microg/mL of oxalic acid. The relative standard deviation for ten replicate measurements of 0.020 microg/mL and 0.900 microg/mL was 2.2% and 1.7%, respectively. No serious interference was identified. Oxalic acid was determined in wastewater and in spinach by the proposed method with satisfactory results.


Assuntos
Ácido Oxálico/análise , Concentração de Íons de Hidrogênio , Indicadores e Reagentes , Oxirredução , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Espectrofotometria/métodos
14.
Talanta ; 52(3): 435-40, 2000 Jun 30.
Artigo em Inglês | MEDLINE | ID: mdl-18968002

RESUMO

This paper reports the use of an adsorptive voltammetric technique for the simultaneous detection of Cd(II), Ni(II) and Co(II) using ammonium 2-amino-cyclopente dithiocarboxylate as a selective complexing agent. Scans containing three resolved peaks corresponding to these metals were obtained in synthetic and real samples. The reduction current peaks of the metals that were distinctly separated by 200 mV or more, allowing their determination over a wide range of concentrations. These metals can be quantified at concentrations above 1.33x10(-8) mol dm(-3) Cd(II), 8.51x10(-9) mol dm(-3) Ni(II) and 3.39x10(-10) mol dm(-3) Co(II). The influence of pH, ligand concentration, scan rate, accumulations time and applied potential was investigated. The R.S.D. at a concentration level of 1.78x10(-7) mol dm(-3) of Cd(II), 3.40x10(-7) mol dm(-3) and Ni(II) and 1.7x10(-9) mol dm(-3) of Co(II) was 2.5% for Cd(II), 2.7% for Ni(II) and 3.3% for Co(II). The method was applied to various water samples.

15.
Talanta ; 49(3): 587-96, 1999 Jul.
Artigo em Inglês | MEDLINE | ID: mdl-18967634

RESUMO

The partial least squares modeling based on singular value decomposition was applied for the simultaneous spectrophotometric determination of Co(II), Ni(II) and Cu(II) as their ammonium 2-amino-1-cyclohexan-1-dithiocarbamate complexes. The latent variable calculation in this partial least squares modeling is not an iterative technique. The detection limits for Co(II), Ni(II) and Cu(II) were 0.072, 0.021 and 0.063 mug/ml, respectively. The application of the method was confirmed by analysis of these metals in sample alloys.

16.
Talanta ; 47(3): 645-9, 1998 Nov.
Artigo em Inglês | MEDLINE | ID: mdl-18967367

RESUMO

A spectrophotometric flow injection system is described for the determination of hydrazine, involving oxidation of hydrazine by thallium(III) with concomitant formation of thallium(I). The optimum analytical conditions have been established. The linear range for hydrazine is 25-500 ng ml(-1) with a detection limit of 20 ng ml(-1). The sampling frequency is 40+/-5 samples h(-1). The relative standard deviation for 100, 250 and 500 ng ml(-1) is 3.5, 2.6 and 1.8%, respectively. The method has been applied to the determination of hydrazine in water.

17.
Talanta ; 41(10): 1651-5, 1994 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-18966116

RESUMO

A simple kinetic spectrophotometric method was developed for the determination of osmium. The method is based on the catalytic effect of osmium as osmium tetroxide on the oxidation of gallocyanine by bromate at pH 7. The reaction is monitored spectrophotometrically by measuring the decreasing absorbance of gallocyanine at 620 nm by the fixed-time method. A detection limit of 0.01 ng/ml and linear calibration curve from 0.1 to 100 and from 100 to 1200 ng/ml Os(VIII) is reported. The relative standard deviation for 0.0100 microg/ml Os(VIII) is 0.8% (N = 10). The method is free from most interferences. Osmium in synthetic samples is determined by this method, with satisfactory results.

18.
Talanta ; 40(9): 1375-8, 1993 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-18965793

RESUMO

A kinetic spectrophotometric method for the determination of trace nitrite (0.003-1.000 microg/ml) based on its catalytic effect on the reaction between potassium bromate and pyrogallol red in acidic media is described. The reaction is monitored spectrophotometrically by measuring the decreasing colour of pyrogallol red at 467 nm by the fixed-time method. At a given time of 3.0 min at 30 degrees, the detection limit is 0.001 microg/ml and the relative standard deviation for 0.010 microg/ml nitrite is 1.8% (n = 8). The method is free from most interferences, especially from large amounts of nitrate and ammonium. The procedure was successfully applied to the determination of trace nitrite in natural water without preconcentration.

19.
Talanta ; 38(2): 229-31, 1991 Feb.
Artigo em Inglês | MEDLINE | ID: mdl-18965133

RESUMO

The reaction between nickel and ammonium 2-amino-1-cyclohexene-1-dithiocarboate in aqueous acetone medium at pH 3.0-8.0 results in a stable dark red complex. The ratio of reagent to nickel in the complex is 2:1 and the formation constant is 7.38 +/- 0.12 x 10(10). Beer's law is obeyed up to 4 microg/ml nickel at the absorption maximum at 535 nm. The apparent molar absorptivity is 2.8 x 10(4) l.mole(-1). cm(-1), and the detection limit is 10 ng/ml nickel. The method is applied to the determination of nickel in vegetable oil.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...