Independent Quantification of Electron and Ion Diffusion in Metallocene-Doped Metal-Organic Frameworks Thin Films.

The chronoamperometric response (I vs t) of three metallocene-doped metal-organic frameworks (MOFs) thin films (M-NU-1000, M = Fe, Ru, Os) in two different electrolytes (tetrabutylammonium hexafluorophosphate [TBAPF6] and tetrabutylammonium tetrakis(pentafluorophenyl)borate [TBATFAB]) was utilized to elucidate the diffusion coefficients of electrons and ions (De and Di, respectively) through the structure in response to an oxidizing applied bias. The application of a theoretical model for solid state voltammetry to the experimental data revealed that the diffusion of ions is the rate-determining step at the three different time stages of the electrochemical transformation: an initial stage characterized by rapid electron diffusion along the crystal-solution boundary (stage A), a second stage that represents the diffusion of electrons and ions into the bulk of the MOF crystallite (stage B), and a final period of the conversion dominated only by the diffusion of ions (stage C). Remarkably, electron diffusion (De) increased in the order of Fe < Ru < Os using PF61- as the counteranion in all the stages of the voltammogram, demonstrating the strategy to modulate the rate of electron transport through the incorporation of rapidly self-exchanging molecular moieties into the MOF structure. The De values obtained with larger TFAB1- counteranion were generally in agreement with the previous trend but were on average lower than those obtained with PF61-. Similarly, the ion diffusion coefficient (Di) was generally higher for TFAB1- than for PF61- as the ions diffuse into the crystal bulk, due to the high degree of ion-pair association between PF61- and the metallocenium ion, resulting in a faster penetration of the weakly associated TFAB1- anion through the MOF pores. These structure-function relationships provide a foundation for the future design, control, and optimization of electron and ion transport properties in MOF thin films.

Photo-triggered release of 5-fluorouracil from a MOF drug delivery vehicle.

A nano metal-organic-framework (nanoMOF) was employed as a first-of-its kind drug delivery vehicle (DDV) for the photo-controlled release of therapeutics with simultaneous breakdown of the carrier into small molecules.

Proton-Coupled Electron Transport in Anthraquinone-Based Zirconium Metal-Organic Frameworks.

The ditopic ligands 2,6-dicarboxy-9,10-anthraquinone and 1,4-dicarboxy-9,10-anthraquinone were used to synthesize two new UiO-type metal-organic frameworks (MOFs; namely, 2,6-Zr-AQ-MOF and 1,4-Zr-AQ-MOF, respectively). The Pourbaix diagrams (E vs pH) of the MOFs and their ligands were constructed using cyclic voltammetry in aqueous buffered media. The MOFs exhibit chemical stability and undergo diverse electrochemical processes, where the number of electrons and protons transferred was tailored in a Nernstian manner by the pH of the media. Both the 2,6-Zr-AQ-MOF and its ligand reveal a similar electrochemical pKa value (7.56 and 7.35, respectively) for the transition between a two-electron, two-proton transfer (at pH < pKa) and a two-electron, one-proton transfer (at pH > pKa). In contrast, the position of the quinone moiety with respect to the zirconium node, the effect of hydrogen bonding, and the amount of defects in 1,4-Zr-AQ-MOF lead to the transition from a two-electron, three-proton transfer to a two-electron, one-proton transfer. The pKa of this framework (5.18) is analogous to one of the three electrochemical pKa values displayed by its ligand (3.91, 5.46, and 8.80), which also showed intramolecular hydrogen bonding. The ability of the MOFs to tailor discrete numbers of protons and electrons suggests their application as charge carriers in electronic devices.

Characterizing Defects in a UiO-AZB Metal-Organic Framework.

Exploring defect sites in metal-organic framework materials has quickly become an interesting topic of discussion in the literature. With reports of the enhancement of material properties with increasing defect sites, we were interested in probing the defect nature of UiO-AZB (UiO = University of Oslo, AZB = 4,4'-azobenzenedicarboxylate) nanoparticles. In this report, we investigate the use of acetic, formic, and benzoic acids as the modulators to prepare UiO-AZB. The results of 1H NMR techniques and BET surface area analysis elucidate the extent of defects in our samples and are provided along with detailed discussions of the observed experimental trends. Interestingly, formic acid samples resulted in the most defected structure, reaching 36%. Additionally, for benzoic acid samples, with a 33% defect level, a drastic reduction in the accessible SA from 2682 m2/g to as low as 903 m2/g was observed, as the concentration of benzoic acid was increased. This was attributed to the creation of macropores in the individual crystallites and confirmed by average pore width analysis.

Study of Electrocatalytic Properties of Metal-Organic Framework PCN-223 for the Oxygen Reduction Reaction.

A highly robust metal-organic framework (MOF) constructed from Zr6 oxo clusters and Fe(III) porphyrin linkers, PCN-223-Fe was investigated as a heterogeneous catalyst for oxygen reduction reaction (ORR). Films of the framework were grown on a conductive FTO substrate and showed a high catalytic current upon application of cathodic potentials and achieved high H2O/H2O2 selectivity. In addition, the effect of the proton source on the catalytic performance was also investigated.

Cargo delivery on demand from photodegradable MOF nano-cages.

We report the photo-induced degradation of and cargo release from a nanoscale metal-organic framework (nMOF) incorporating photo-isomerizable 4,4'-azobenzenedicarboxylate (AZB) linkers. The structure matches a UiO-type framework where 12 4,4'-azobenzenedicarboxylate moieties are connected to a Zr6O4(OH)4 cluster, referred to as UiO-AZB. Due to the incorporation of photo-isomerizable struts, the degradation of UiO-AZB is accelerated by irradiation with white light (1.3 ± 0.1% h-1 under dark conditions vs. 8.4 ± 0.4% h-1 when irradiated). Additionally, we show slow release of Nile Red (NR) which is triggered by irradiation (0.04 ± 0.01% h-1 under dark conditions vs. 0.36 ± 0.02% h-1 when irradiated).

Electrochemical Water Oxidation by a Catalyst-Modified Metal-Organic Framework Thin Film.

Water oxidation, a key component in artificial photosynthesis, requires high overpotentials and exhibits slow reaction kinetics that necessitates the use of stable and efficient heterogeneous water-oxidation catalysts (WOCs). Here, we report the synthesis of UiO-67 metal-organic framework (MOF) thin films doped with [Ru(tpy)(dcbpy)OH2 ]2+ (tpy=2,2':6',2''-terpyridine, dcbpy=5,5'-dicarboxy-2,2'-bipyridine) on conducting surfaces and their propensity for electrochemical water oxidation. The electrocatalyst oxidized water with a turnover frequency (TOF) of (0.2±0.1) s-1 at 1.71 V versus the normal hydrogen electrode (NHE) in buffered solution (pH∼7) and exhibited structural and electrochemical stability. The electroactive sites were distributed throughout the MOF thin film on the basis of scan-ratedependent voltammetry studies. This work demonstrates a promising way to immobilize large concentrations of electroactive WOCs into a highly robust MOF scaffold and paves the way for future photoelectrochemical water-splitting systems.

Solvothermal preparation of an electrocatalytic metalloporphyrin MOF thin film and its redox hopping charge-transfer mechanism.

A thin film of a metalloporphyrin metal-organic framework consisting of [5,10,15,20-(4-carboxyphenyl)porphyrin]Co(III) (CoTCPP) struts bound by linear trinuclear Co(II)-carboxylate clusters has been prepared solvothermally on conductive fluorine-doped tin oxide substrates. Characterization of this mesoporous thin film material, designated as CoPIZA/FTO, which is equipped with large cavities and access to metal active sites, reveals an electrochemically active material. Cyclic voltammetry displays a reversible peak with E(1/2) at -1.04 V vs ferrocyanide attributed to the (Co(III/II)TCPP)CoPIZA redox couple and a quasi-reversible peak at -1.45 V vs ferrocyanide, which corresponds to the reduction of (Co(II/I)TCPP)CoPIZA. Analysis of the spectroelectrochemical response for the (Co(II/I)TCPP)CoPIZA redox couple revealed non-Nernstian reduction with a nonideality factor of 2 and an E(1/2) of -1.39 V vs ferrocyanide. The film was shown to retain its structural integrity with applied potential, as was demonstrated spectroelectrochemically with maintenance of isosbestic points at 430, 458, and 544 nm corresponding to the (Co(III/II)TCPP)CoPIZA transition and at 390 and 449 nm corresponding to the (Co(II/I)TCPP)CoPIZA transition. The mechanism of charge transport through the film is proposed to be a redox hopping mechanism, which is supported by both cyclic voltammetry and spectroelectrochemistry. A fit of the time-dependent spectroelectrochemical data to a modified Cottrell equation gave an apparent diffusion coefficient of 7.55 (±0.05) × 10(-14) cm(2)/s for ambipolar electron and cation transport throughout the film. Upon reduction of the metalloporphyrin struts to (Co(I)TCPP)CoPIZA, the CoPIZA thin film demonstrated catalytic activity for the reduction of carbon tetrachloride.