Effect of primer compositions on the bond strength of resin cement to ceramic materials.

PURPOSE: To investigate the effect of different chemical compositions of primers on the bond strength between nano-ceramic, polymer-infiltrated ceramic, and zirconia ceramic materials and dual-cure cement. METHODS: Fifty 2 mm-thick specimens were prepared from Vita Enamic, Cerasmart, and Katana Zirconia UTML. The specimens were embedded in acrylic blocks. To standardize the surfaces, 600 grit silicon carbide abrasives were applied underwater for 60 seconds. Then, each section underwent grit-blasting using Al2O3 with a particle size of 50 µm at 10 mm and a pressure of 2 bar for 10 seconds. Each prepared sample from the experimental groups received the appropriate primer (Z-PRIME Plus, G-Multi Primer, Alloy Primer, Clearfil Primer Plus) according to the manufacturers' instructions. Subsequently, the prepared CAD-CAM specimens underwent cementation using Duo-Link Universal Adhesive Resin Cement with a cylinder mold of 2.6 mm diameter and 3 mm height. The cement was light-cured for 20 seconds from both sides. The specimens obtained were stored in distilled water at 37°C for 24 hours. The shear bond strength test of the specimens was performed using a Bisco Shear Bond Tester device. The data were statistically analyzed using ANOVA and the Kruskal-Wallis test (P< 0.05). RESULTS: The highest bond strength was observed in Z-Prime Plus applied specimens, regardless of material differences (Cerasmart 11.60±4.61; Vita Enamic 12.93±3.86; Katana Zirconia 13.85±4.00). The lowest bond strength, showing differences according to materials (P< 0.05), was found for Clearfil Ceramic Primer Plus-Cerasmart (7.88±3.90), Alloy Primer-Vita Enamic (7.90±2.14), and G Multi Primer-Katana Zirconia UTML (4.98±3.67). CLINICAL SIGNIFICANCE: Failure of the restoration usually occurs at the weakest point in this three-element structure, thus correct primer selection according to material type is important. Additionally, for all CAD-CAM materials used in the study, Z-Prime Plus showed significantly greater adhesion strength than other systems so it may be more appropriate for use in clinics.

The visual and instrumental analyses of different single-shade resin composites / Análisis visual e instrumental de diferentes resinas compuestas omnicromáticas

Abstract The purpose of this study was to evaluate the color adaptation of single-shade resin composites applied to different tooth shades. A total of 108 class III preparations (n=6) were performed on the acrylic denture maxillary incisors (2mm depth and 2mm height). 5 single-shade resin composites (Vittra APS Unique, Omnichroma, ZenChroma, Clearfil Majesty ES-2 Universal, Charisma Topaz One) and 1 multishade resin composite (Estelite Asteria) were placed in the cavities and polished. I performed visual and instrumental color analyses. The CIEDE2000 formula was used to assess the shade differences (ΔE) between teeth and restorations. The obtained ΔE values were recorded and statistically analyzed. For the instrumental analysis, ZenChroma in A1 shade groups showed statistically significant higher differences (p<0.05). Among all tested materials, A3 shade groups showed lower ΔE values (p<0.05). For the visual analysis, there were no significant differences between materials and scores in A1 and A3 shade groups (p>0.05). There were statistically significant differences between the materials and the scores in A2 shade groups (p<0.05). As a result of this study, it was concluded that, making esthetic restorations with single-shade resin composites promises proper color adaptation, but their properties still need improvement. Single-shade resin composites can reduce chair-time and technical sensitivity with good color matching.

Resumen El objetivo de este estudio fue evaluar la adaptación del color de resinas compuestas omnicromáticas. Se realizaron un total de 108 preparaciones de clase III (n=6) en los incisivos superiores de prótesis acrílicas (2mm de profundidad y 2mm de altura). Se colocaron cinco resinas compuestas omnicromáticas (Vittra APS Unique, Omnichroma, ZenChroma, Clearfil Majesty ES-2 Universal, Charisma Topaz One), además de una resina multitono (Estelite Asteria) en las cavidades y se pulieron. Se realizó el análisis de color visual e instrumental. Se utilizó la fórmula CIEDE2000 para evaluar las diferencias de tono (ΔE) entre dientes y restauraciones. Los valores de ΔE obtenidos se registraron y analizaron estadísticamente. Para el análisis instrumental, ZenChroma en los grupos de color A1 mostró diferencias mayores estadísticamente significativas (p<0,05). Entre todos los materiales probados, los grupos de tonos A3 mostraron valores de ΔE más bajos (p<0.05). Para el análisis visual, no hubo diferencias significativas entre materiales y puntuaciones en los grupos de color A1 y A3 (p>0,05). Hubo diferencias estadísticamente significativas entre los materiales y las puntuaciones en los grupos de color A2 (p<0,05). Como resultado de este estudio, se concluyó que la realización de restauraciones estéticas con resinas compuestas omnicromáticas promueve una adecuada adaptación del color, pero aún necesitan mejorar sus propiedades. Las resinas compuetas omnicromáticas pueden reducir el tiempo de atención clínica y la sensibilidad técnica con una adecuada combinación de colores.

The radiographic evaluation of 11 different resin composites.

Radiopacities of dental materials used in restorations are very important in making the radiographic diagnosis. Therefore, the aim of our study was to evaluate the radiopacity of five single-shade and six simplishade resin composites with digital technique. Five different single-shade (Charisma Topaz One, Omnichroma, Clearfil Majesty ES-2 Universal, Vittra APS Unique, ZenChroma) and six different simplishade resin composites (G-aenial A'CHORD, Essentia Universal, OptiShade, Estelite Asteria, Filtek Universal, Filtek Z250) were used. For each group, five disk-shaped resin composites of 1 mm and 2 mm thicknesses were prepared. As a control, tooth slices with 1 mm and 2 mm thicknesses and a 99.5% pure aluminum step-wedge were used. The samples, tooth slices, and a step-wedge were placed on a photostimulable phosphor plate. Digital radiographs were taken from 30 and 40 cm distances (70 kVp, 7 mA 0.28 ms). The images were analyzed using ImageJ software to measure the mean gray values. Data were analyzed using SPSS 22 package program and Kruskal-Wallis H Test (p < 0.05). The highest radiopacity was seen in Filtek Universal at both distances and thicknesses. Omnichroma had the lowest radiopacity in all parameters. All specimens showed higher radiopacity than dentin. Except for Omnichroma 1 and 2 mm thick, Clearfil Majesty ES-2 Universal 2 mm thick, samples showed higher radiopacities than enamel (p < 0.05). The restorative materials tested were found to be more radiopaque than dentin. The samples passed the International Organization for Standardization for radiopacity values. The radiopacity values were affected by thickness and type of materials.

Evaluation of the color stability of attachments made with different resin composites.

INTRODUCTION: Coloring solutions-such as coffee and cola, frequently consumed daily-cause coloration of attachments made with resin composites. This may reduce the motivation for clear aligner treatment, often preferred by patients with esthetic concerns. This study aimed to compare color changes of orthodontic attachments made with 3 different composite resins. METHODS: A total of 90 premolar teeth (n = 10) extracted for orthodontic reasons were used. All teeth were embedded in plaster models to imitate the arch shape and scanned with an intraoral scanner. Horizontal rectangular attachments were placed on each tooth by printing the attachment template obtained using digital models. Three composite resins: Omnichroma, GC Aligner Connect, and Tetric PowerFlow were used to prepare the attachments. The models prepared in arc-shaped in each composite group were divided into subgroups and kept in 3 different solutions (coffee, cola, and distilled water) in the incubator at 37 ± 1°C. The models were photographed at baseline and 28 days later with the Smile-Lite MDP device. L, a, and b values were obtained with Digital Color Meter (version 5.22; Apple, Cupertino, Calif). CIEDE2000 formula (ΔE00) was used to evaluate color changes. In addition, models were scanned for color determination at baseline and 28 days later with the 3Shape intraoral scanner. RESULTS: There were significant color differences between solutions (P <0.05). CONCLUSIONS: Attachments can be colored easily. Patients should be warned against coloring solutions at the beginning of the treatment, and their eating and drinking habits should be regulated.

Evaluation of the marginal integrity of various pit and fissure sealants.

PURPOSE: To evaluate the marginal integrity of various pit and fissure sealants subjected to different application methods. METHODS: A total of 253 non-carious human third molars extracted and randomly divided into two groups according to the preparation method employed: invasive or non-invasive. Eight fissure sealant materials were tested: nano-filled flowable composite (Filtek Ultimate Flow), nanohybrid flowable composite (GrandioSo Flow), micro-hybrid flowable composite (Majesty Flow), resin-based unfilled fissure sealant (ClinPro Sealant), resin-based filled fissure sealant (Fissurit FX), resin-based highly filled fissure sealant (GrandioSeal), giomer-based fissure sealant (BeautiSealant), and glass ionomer-based fissure sealant (Fuji Triage). Samples were subjected to two-year cyclic thermo-mechanical and brushing simulations. Two observers quantitatively evaluated the restoration margins and classified them as either "permanent restoration edge", or if a gap larger than 250 µm was evident, "gapping at the restoration edge". The extent of the gap was recorded as a percentage relative to the total length of the restoration edge. RESULTS: The baseline marginal adaptation had no significant effect on the marginal adaptation (P > 0.05). However, the preparation method and type of fissure sealant material had a significant impact on the marginal adaptation (P < 0.05). CONCLUSION: On the basis of quantitative analysis, the highest marginal integrity was observed for flowable composites, whereas the lowest was observed for glass ionomer-based fissure sealant.

Awareness about dental amalgam among Turkish dentists and patients: a questionnaire and search engine based cross-sectional study.

OBJECTIVES: There has been considerable controversy concerning the health risks and benefits of using mercury-containing amalgam. This study aimed to evaluate the Turkish dentists' and patients' preference and opinion about amalgam and to assess Internet search trends about amalgam. METHODS: The study consists of three stages. The first two stages of the study are cross-sectional studies to verify both the patients' perception with amalgam restorations and dentists' attitudes regarding the use of dental amalgam. The third stage of the study evaluated the Internet search trends of Turkish people about mercury and amalgam related concerns between 2004 and 2018. RESULTS: A total of 320 patients (180 female, 140 male) and 1,211 dentists (533 female, 678 male) participated in this study. Majority of the patients have no idea about the type of dental restorations and effect of dental materials on their health. 188 (58.8%) participants stated that they would not prefer amalgam restoration in their teeth as amalgam is unaesthetic. A total of 24% (291) of the dentists used amalgam routinely; 9.5% (156) of them used amalgam rarely, and 63.1% (764) did not use amalgam at all. The reason for not using amalgam included the patients' desire and unaesthetic properties. According to the Internet search trends, Turkish people do not know as much about amalgam as people in the rest of the world. CONCLUSION: Awareness about dental amalgam is low among patients studied. Although dentists do not use dental amalgam frequently, they disagree on banning dental amalgam.

Genetic polymorphisms in preoperative myocardial infarction.

OBJECTIVE: This study compared plasminogen activator inhibitor 1 and methylenetetrahydrofolate reductase C677T and A1298C polymorphisms in patients with myocardial infarction with ST-segment elevation before undergoing to coronary artery bypass grafting, and in patients who had previously undergone coronary artery bypass grafting. METHOD: Seventy patients with myocardial infarction with ST-segment elevation, scheduled to undergo coronary artery bypass grafting, were included in the study group, and 70 patients who had previously undergone coronary artery bypass grafting were included in the control group. Genetic polymorphisms were determined using real-time polymerase chain reaction methods. RESULTS: Our data showed that there were no significant differences in plasminogen activator inhibitor 1 and methylenetetrahydrofolate reductase C677T and A1298C polymorphisms or allele frequencies between the 2 groups. CONCLUSION: Plasminogen activator inhibitor 1 and methylenetetrahydrofolate reductase C677T and A1298C polymorphisms were not associated risk factors in patients who had myocardial infarction with ST-segment elevation and planned to have coronary artery bypass grafting.