RESUMO
This paper describes a study of the system MoO3-Nd2O3 using a combination of X-ray powder diffraction (XRD), neutron powder diffraction (NPD), thermogravimetric analysis (TGA), and ac impedance spectroscopy (IS). A phase-pure material is observed at a composition of 45.5 mol % Nd2O3, which corresponds to an ideal stoichiometry of Nd5Mo3O16.5. XRD and NPD show that the crystal structure is a superstructure of the fluorite arrangement, with long-range ordering of the two cation species leading to a doubled unit cell parameter. The sample is found to be significantly oxygen deficient, i.e. Nd5Mo3O15.63(4), when it is prepared by a solid-state reaction at 1473 K in air. TGA measurements indicate that the sample loses only minimal mass on heating to 1273 K in O2. IS studies of the mean conductivity under different atmospheres show that the sample is a mixed conductor between ambient temperature and 873 K, with a dominant electronic component at higher temperatures, as demonstrated by measurements under inert atmosphere. NPD measurements indicate that the anion vacancies are preferentially located on the O2 sites, while studies of the temperature dependence performed under an O2 atmosphere to 1273 K show significantly anisotropic thermal parameters of the anions. Together with analysis of the total neutron scattering data, this supports a model of oxygen ions hopping between O2 positions, with a vacancy, rather than interstitial, mechanism for the anion diffusion.
RESUMO
The origin of the 2-order of magnitude difference in the proton conductivity of the hydrated forms of hexagonal and cubic oxygen deficient BaScxTi1-xO3-δ (x = 0.2 and x = 0.7) was probed using a combination of neutron diffraction and density functional theory techniques to support published X-ray diffraction, conductivity, thermogravimetric and differential scanning calorimetry studies. Cation ordering is found in the 6H structure type (space group P63/mmc) adopted by BaSc0.2Ti0.8O3-δ with scandium preferentially substituting in the vertex sharing octahedra (2a crystallographic site) and avoiding the face-sharing octahedra (4f site). This is coupled with oxygen vacancy ordering in the central plane of the face-sharing octahedra (O1 site). In BaSc0.7Ti0.3O3-δ a simple cubic perovskite (space group Pm3[combining macron]m) best represents the average structure from Rietveld analysis with no evidence of either cation ordering or oxygen vacancy ordering. Significant diffuse scattering is observed, indicative of local order. Hydration in both cases leads to complete filling of the available oxygen vacancies and permits definition of the proton sites. We suggest that the more localised nature of the proton sites in the 6H structure is responsible for the significantly lower proton conduction observed in the literature. Within the 6H structure type final model, proton diffusion requires a 3-step process via higher energy proton sites that are unoccupied at room temperature and is also likely to be anisotropic whereas the highly disordered cubic perovskite proton position allows 3-dimensional diffusion by well-described modes. Finally, we propose how this knowledge can be used to further materials design for ceramic electrolytes for proton conducting fuel cells.
RESUMO
This work presents a structural investigation of La2-xNdxCe2O7 (x = 0.0, 0.5, 1.0, 1.5, 2.0) using X-ray powder diffraction and total scattering neutron powder diffraction, analysed using Rietveld and the reverse Monte Carlo method (RMC). Ab initio molecular dynamics (MD) modelling is also performed for further investigations of the local order. The main intensities in the neutron diffraction data for the La2-xNdxCe2O7 series correspond to the fluorite structure. However, additional C-type superlattice peaks are visible for x > 0 and increase in intensity with increasing x. The Nd-containing compositions (x > 0) are best fitted with Rietveld analysis by using a combination of oxygen deficient fluorite and oxygen excess C-type structures. No indications of cation order are found in the RMC or Rietveld analysis, and the absence of cation order is supported by the MD modelling. We argue that the superlattice peaks originate from oxygen vacancy ordering and associated shift in the cation position away from the ideal fluorite site similar to that in the C-type structure, which is seen from the Rietveld refinements and the observed ordering in the MD modelling. The vacancies favour alignments in the ã110ã, ã111ã and especially the ã210ã direction. Moreover, we find that such ordering might also be found to a small extent in La2Ce2O7, explaining the discernible modulated background between the fluorite peaks. The observed overlap of the main Bragg peaks between the fluorite and C-type phase supports the co-existence of vacancy ordered and more disordered domains. This is further supported by the observed similarity of the radial distribution functions as modelled with MD. The increase in long range oxygen vacancy order with increasing Nd-content in La2-xNdxCe2O7 corresponds well with the lower oxide ion conductivity in Nd2Ce2O7 compared to La2Ce2O7 reported earlier.
RESUMO
The solid-state synthesis and structural characterisation of perovskite BaSn1-x Sc x O3-δ (x = 0.0, 0.1, 0.2, 0.3, 0.4) and its corresponding hydrated ceramics are reported. Powder and neutron X-ray diffractions reveal the presence of cubic perovskites (space group Pm3m) with an increasing cell parameter as a function of scandium concentration along with some indication of phase segregation. 119Sn and 45Sc solid-state NMR spectroscopy data highlight the existence of oxygen vacancies in the dry materials, and their filling upon hydrothermal treatment with D2O. It also indicates that the Sn4+ and Sc3+ local distribution at the B-site of the perovskite is inhomogeneous and suggests that the oxygen vacancies are located in the scandium dopant coordination shell at low concentrations (x ≤ 0.2) and in the tin coordination shell at high concentrations (x ≥ 0.3). 17O NMR spectra on 17O enriched BaSn1-x Sc x O3-δ materials show the existence of Sn-O-Sn, Sn-O-Sc and Sc-O-Sc bridging oxygen environments. A further room temperature neutron powder diffraction study on deuterated BaSn0.6Sc0.4O3-δ refines the deuteron position at the 24k crystallographic site (x, y, 0) with x = 0.579(3) and y = 0.217(3) which leads to an O-D bond distance of 0.96(1) Å and suggests tilting of the proton towards the next nearest oxygen. Proton conduction was found to dominate in wet argon below 700 °C with total conductivity values in the range 1.8 × 10-4 to 1.1 × 10-3 S cm-1 between 300 and 600 °C. Electron holes govern the conduction process in dry oxidizing conditions, whilst in wet oxygen they compete with protonic defects leading to a wide mixed conduction region in the 200 to 600 °C temperature region, and a suppression of the conductivity at higher temperature.
RESUMO
This article establishes the effect of structure and composition on water uptake and the hydration and proton transport properties of the oxygen-deficient perovskite series BaTi1-x(In,Sc)xO3-x/2, with 0.2 ≤ x ≤ 0.7. The equilibrium water uptake is determined by thermogravimetry, while combining thermogravimetry with differential scanning calorimetry allows for direct determination of the materials' hydration thermodynamics. Proton and oxide ion transport properties are characterized by means of ac impedance measurements up to 1000 °C. In general, the hydration thermodynamics of the scandates are more favorable than that of the indates and are also affected by changes in crystal structure throughout the series. The more favorable hydration thermodynamics of cubic scandates increase their proton conductivity at higher temperatures compared to their indate counterparts. In contrast to the BaTi1-xInxO3-x/2 series, the BaTi1-xScxO3-x/2 (0.5 ≤ x ≤ 0.7) materials retain their cubic structures upon full saturation by protons and show no signs of chemical instability upon exposure to 1 atm H2O(g) down to 100 °C. The BaTi1-xScxO3-x/2 materials with 0.5 ≤ x ≤ 0.7 may therefore find application in, for instance, steam electrolysis or similar processes involving high water vapor pressures.
RESUMO
BaTi1-xScxO3-δ (x = 0.1-0.8) was prepared via solid state reaction. High resolution X-ray powder diffraction was used to characterise the synthesised materials. It was found that low substitution (x = 0.1 and 0.2) of Ti(4+) for Sc(3+) gives a hexagonal perovskite structure, whereas high substitution (x = 0.5-0.7) results in a cubic perovskite structure. Thermogravimetric analysis revealed significant levels of protons in both as-prepared and hydrated samples. Electrical conductivity was measured by AC impedance methods under oxygen, argon and under dry and humid, both H2O and D2O, conditions for BaTi1-xScxO3-δ (x = 0.2, 0.6 and 0.7). In the temperature range of 150-600 °C, under humid conditions, the conductivity is significantly higher than that under the dry conditions. The increase in conductivity is especially prominent for the cubic phases, indicating that protons are the dominant charge carriers. The proton conductivity of hexagonal BaTi0.8Sc0.2O3-δ is approx. two orders of magnitude lower than that of the more heavily substituted cubic phases. Conductivity is also found to be higher in dry O2 than in Ar in the whole temperature range of 150-1000 °C, characteristic of a significant contribution from p-type charge carriers under oxidising atmospheres. Greater Sc(3+) substitution leads to a higher proton concentration and the highest proton conductivity (σâ¼ 2 × 10(-3) S cm(-1) at 600 °C) is found for the BaTi0.3Sc0.7O3-δ composition.
RESUMO
Deuterated BaTi0.5In0.5O2.75 has been studied with neutron total (Bragg plus diffuse) scattering data, using both the Rietveld refinement method and the reverse Monte Carlo (RMC) modelling technique, to investigate the preferred proton site and its local structural environment. The Rietveld analysis shows an excellent fit between experimental data and a long-range cubic description of the BaTi0.5In0.5O2.53(OD)0.44 perovskite structure containing a statistical distribution of Ti and In ions at the centre of regular (Ti/In)O6 octahedra. However, an RMC analysis of the data reveals substantial local structural features that reflect limitations of the Rietveld method for studies of this type. The Ti-O and In-O pair distribution functions given by the RMC analysis are markedly different from each other, with average Ti-O and In-O bond distances of 2.035 Å and 2.159 Å, respectively. The InO6 octahedra are regular in shape whereas the TiO6 octahedra are distorted. The average O-D bond distance is roughly 0.96 Å, and the preferred deuteron sites have a second nearest oxygen distance of 2.13 Å, which confirms localized tilting of the deuteron and indicates a substantial degree of hydrogen bonding. The impact of octahedral distortion and hydrogen bonding on the proton conduction mechanism is discussed.
Assuntos
Compostos de Bário/química , Deutério/química , Índio/química , Óxidos/química , Prótons , Titânio/química , Eletrólitos/química , Ligação de Hidrogênio , Difração de NêutronsRESUMO
Three different perovskite-related phases were isolated in the SrGa(1-x)Sc(x)O(2.5) system: Sr(2)GaScO(5), Sr(10)Ga(6)Sc(4)O(25), and SrGa(0.75)Sc(0.25)O(2.5). Sr(2)GaScO(5) (x = 0.5) crystallizes in a brownmillerite-type structure [space group (S.G.) Icmm, a = 5.91048(5) Å, b = 15.1594(1) Å, and c = 5.70926(4) Å] with complete ordering of Sc(3+) and Ga(3+) over octahedral and tetrahedral positions, respectively. The crystal structure of Sr(10)Ga(6)Sc(4)O(25) (x = 0.4) was determined by the Monte Carlo method and refined using a combination of X-ray, neutron, and electron diffraction data [S.G. I4(1)/a, a = 17.517(1) Å, c = 32.830(3) Å]. It represents a novel type of ordering of the B cations and oxygen vacancies in perovskites. The crystal structure of Sr(10)Ga(6)Sc(4)O(25) can be described as a stacking of eight perovskite layers along the c axis ...[-(Sc/Ga)O(1.6)-SrO(0.8)-(Sc/Ga)O(1.8)-SrO(0.8)-](2).... Similar to Sr(2)GaScO(5), this structure features a complete ordering of the Sc(3+) and Ga(3+) cations over octahedral and tetrahedral positions, respectively, within each layer. A specific feature of the crystal structure of Sr(10)Ga(6)Sc(4)O(25) is that one-third of the tetrahedra have one vertex not connected with other Sc/Ga cations. Further partial replacement of Sc(3+) by Ga(3+) leads to the formation of the cubic perovskite phase SrGa(0.75)Sc(0.25)O(2.5) (x = 0.25) with a = 3.9817(4) Å. This compound incorporates water molecules in the structure forming SrGa(0.75)Sc(0.25)O(2.5)·xH(2)O hydrate, which exhibits a proton conductivity of â¼2.0 × 10(-6) S/cm at 673 K.
RESUMO
Neutron total scattering data have been used to probe the long- and short-range structure of 0.5BiMnO(3)-0.5ATiO(3) (A = Ba or Sr). Modelling of the total scattering data, using the reverse Monte Carlo (RMC) method, reveals local disorder that differs substantially from the average structure. Significantly, the Bi(3+) cations prefer to adopt an asymmetric coordination due to the influence of the lone-pair electrons.
RESUMO
The highly disordered structure of the delta phase of Bi2O3, which possesses the highest known oxide-ion conductivity, has been studied using neutron powder diffraction. A detailed analysis of data collected at 1033(3) K using Rietveld refinement indicates that the time-averaged structure of delta-Bi2O3 can be described using the accepted model of a disordered, anion-deficient fluorite structure in space group Fm3m. However, reverse Monte Carlo modelling of the total (Bragg plus diffuse) scattering demonstrates that the local anion environment around the Bi3+ resembles the distorted square pyramidal arrangement found within the stable alpha and metastable beta phases at ambient temperature, which is characteristic of the cation's 6s2 lone-pair configuration. Similarities between the structures of the highly disordered delta phase and the ambient temperature metastable beta phase are used to support this assignment and assess the validity of previous structural models based on short-range ordering of vacancies within the cubic lattice of delta-Bi2O3.