Spray drying encapsulation of essential oils; process efficiency, formulation strategies, and applications.

Essential oils (EOs) have many beneficial qualities, including antimicrobial, antioxidant, antiviral, and antifungal activities, along with good aroma, which have played a significant role in pharmaceutical, textile, and food industries. However, their high volatility and sensibility to external factors, as well as susceptibility to deterioration caused by environmental and storage conditions, or even common processing, and consequently limited water solubility, makes it difficult to incorporate them into aqueous food matrices and limits their industrial application. Spray-drying encapsulation has been proposed as a solution and a challenging research field to retard oil oxidation, extend EO's shelf life, improve their physicochemical stability, achieve controlled release, suggest novel uses, and therefore boost their added value. The objective of this review is to discuss various used wall materials, infeed emulsion properties, the main formulation and process variables affecting the physicochemical properties and release characteristics of the EOs-loaded particles obtained by spray-drying, the stability of EOs during storage, and the applications of encapsulated EOs powders in foods and nutrition, pharmaceuticals, and textile industries. The current review also summarizes recent advances in spray drying approaches for improving encapsulation efficiency, flavor retention, controlled release, and applicability of encapsulated EOs, thereby expanding their use and functionalities.

Effects of Extraction Methods and Conditions on Bioactive Compounds Extracted from Phaeodactylum tricornutum.

The effect of homogenization, ultrasound and microwave extraction methods and conditions on fucoxanthin content, total phenolic content and antioxidant activity of extracts obtained from Phaeodactylum tricornutum were investigated in this study. The solvent/biomass ratio was the most effective parameter on fucoxanthin content, total phenolic content and antioxidant activity. The maximum fucoxanthin content (5.60 ± 0.06 mg/g) and antioxidant activity (763.00 ± 15.88 EC50 ?g/mL extract) were obtained with the homogenization extraction method whose optimum conditions were 1.93% biomass/solvent ratio, ~5200 rpm homogenization rate and 14.2 min extraction time. Although the ultrasonic extraction method has reached the approximately same level of fucoxanthin content (5.24 ± 0.07 mg/g)), TPC (67.68 ± 1.58 mg gallic acid/L) and antioxidant activity (619.90 ± 17.16 EC50 ?g/mL extract) at an amplitude of 55.72%, a higher biomass/ solvent ratio (2.72%) and a longer extraction time (17.37 min) have been required. The lowest fucoxanthin content, total phenolic content and antioxidant activity were determined for the microwave extraction method.

Spray dried melon seed milk powder: physical, rheological and sensory properties.

Melon seed milk (MSM) powder was produced by aiming to get alternative vegetable milk from crushed Kirkagaç (Cucumis melo subsp. melo cv. Kirkagaç) and Çesme (C. melo subsp. melo cv. Çesme) type melon seeds. MSM was converted to powder form via spray dryer at inlet air temperature of 150 °C, air flow rate of 473 l · h(-1), aspiration ratio of 24 m(3) · h(-1)and feed flow rate of 8 ml · min(-1) in order to extend the shelf life and usage area. The moisture content and water activity of samples changed in range of 2.1 to 2.4 % and 0.260 to 0.310, respectively. Bulk densities and the tapped densities of powders were ranged from 340 to 360 kg · m(-3) and 730 and 740 kg · m(-3). MSM powders showed poor flow behavior as determined from Carr Index. The particle densities of powders ranged between and 1069 kg · m(-3). Wettability time of powders was found as 7 s. The Bingham model was the best model fitted to rheological data of MSM beverages. Sensory evaluation test results showed that, the beverage obtained from reconstituted Kirkagaç powder achieved the highest score by panelists.