Influence of Sulfurization Time on Sb2S3 Synthesis Using a New Graphite Box Design.

In recent years, antimony sulfide (Sb2S3) has been investigated as a photovoltaic absorber material due to its suitable absorber coefficient, direct band gap, extinction coefficient, earth-abundant, and environmentally friendly constituents. Therefore, this work proposes Sb2S3 film preparation by an effective two-step process using a new graphite box design and sulfur distribution, which has a high repeatability level and can be scalable. First, an Sb thin film was deposited using the RF-Sputtering technique, and after that, the samples were annealed with elemental sulfur into a graphite box, varying the sulfurization time from 20 to 50 min. The structural, optical, morphological, and chemical characteristics of the resulting thin films were analyzed. Results reveal the method's effectivity and the best properties were obtained for the sample sulfurized during 40 min. This Sb2S3 thin film presents an orthorhombic crystalline structure, elongated grains, a band gap of 1.69 eV, a crystallite size of 15.25 Å, and a nearly stoichiometric composition. In addition, the formation of a p-n junction was achieved by depositing silver back contact on the Glass/FTO/CdS/Sb2S3 structure. Therefore, the graphite box design has been demonstrated to be functional to obtain Sb2S3 by a two-step process.

Gender, smoking, and tobacco cessation with pharmacological treatment in a cluster randomized clinical trial.

INTRODUCTION: Whether men find it easier to quit smoking than women is still controversial. Different studies have reported that the efficacy of pharmacological treatments could be different between men and women. This study conducted a secondary analysis of 'Subsidized pharmacological treatment for smoking cessation by the Spanish public health system' (FTFT-AP study) to evaluate the effectiveness of a drug-funded intervention for smoking cessation by gender. METHODS: A pragmatic randomized clinical trial by clusters was used. The population included smokers aged ≥18 years, smoking >10 cigarettes per day, randomly assigned to an intervention group receiving regular practice and financed pharmacological treatment, or to a control group receiving only regular practice. The main outcome was continued abstinence at 12 months, self-reported and validated with CO-oximetry. The percentage, with 95% confidence intervals, of continued abstinence was compared between both groups at 12 months post-intervention, by gender and the pharmacological treatment used. Multilevel logistic regression analysis was performed. RESULTS: A total of 1154 patients from 29 healthcare centers were included. The average age was 46 years (SD=11.78) and 51.7% were men. Overall, the self-reported abstinence at 12 months was 11.1% (62) in women and 15.7% (93) in men (AOR=1.4; 95% CI: 1.0-2.0), and abstinence validated by CO-oximetry was 4.6% (26) and 5.9% (35) in women and men, respectively (OR=1.3; 95% CI: 0.7-2.2). In the group of smokers receiving nicotine replacement treatment, self-reported abstinence was higher in men compared to women (29.5% vs 13.5%, OR=2.7; 95% CI: 1.3-5.8). CONCLUSIONS: The effectiveness of a drug-financed intervention for smoking cessation was greater in men, who also showed better results in self-reported abstinence with nicotine replacement treatment.

Improved Feedback Quantizer with Discrete Space Vector.

The use of advanced modulation and control schemes for power converters, such as a Feedback Quantizer and Predictive Control, is widely studied in the literature. This work focuses on improving the closed-loop modulation scheme called Feedback Quantizer, which is applied to a three-phase voltage source inverter. This scheme has the natural behavior of mitigating harmonics at low frequencies, which are detrimental to electrical equipment such as transformers. This modulation scheme also provides good tracking for the voltage reference at the fundamental frequency. On the other hand, the disadvantage of this scheme is that it has a variable switching frequency, creating a harmonic spectrum in frequency dispersion, and it also needs a small sampling time to obtain good results. The proposed scheme to improve the modulation scheme is based on a Discrete Space Vector with virtual vectors to obtain a better approximation of the optimal vectors for use in the algorithm. The proposal improves the conventional scheme at a high sampling time (200 µs), obtaining a THD less than 2% in the load current, decreases the noise created by the conventional scheme, and provides a fixed switching frequency. Experimental tests demonstrate the correct operation of the proposed scheme.

Nanostructured Cellulose-Based Aerogels: Influence of Chemical/Mechanical Cascade Processes on Quality Index for Benchmarking Dye Pollutant Adsorbents in Wastewater Treatment.

(1) Background: Nanostructured cellulose has emerged as an efficient bio-adsorbent aerogel material, offering biocompatibility and renewable sourcing advantages. This study focuses on isolating (ligno)cellulose nanofibers ((L)CNFs) from barley straw and producing aerogels to develop sustainable and highly efficient decontamination systems. (2) Methods: (Ligno)cellulose pulp has been isolated from barley straw through a pulping process, and was subsequently deconstructed into nanofibers employing various pre-treatment methods (TEMPO-mediated oxidation process or PFI beater mechanical treatment) followed by the high-pressure homogenization (HPH) process. (3) Results: The aerogels made by (L)CNFs, with a higher crystallinity degree, larger aspect ratio, lower shrinkage rate, and higher Young's modulus than cellulose aerogels, successfully adsorb and remove organic dye pollutants from wastewater. (L)CNF-based aerogels, with a quality index (determined using four characterization parameters) above 70%, exhibited outstanding contaminant removal capacity over 80%. The high specific surface area of nanocellulose isolated using the TEMPO oxidation process significantly enhanced the affinity and interactions between hydroxyl and carboxyl groups of nanofibers and cationic groups of contaminants. The efficacy in adsorbing cationic dyes in wastewater onto the aerogels was verified by the Langmuir adsorption isotherm model. (4) Conclusions: This study offers insights into designing and applying advanced (L)CNF-based aerogels as efficient wastewater decontamination and environmental remediation platforms.

Antibacterial Aerogels-Based Membranes by Customized Colloidal Functionalization of TEMPO-Oxidized Cellulose Nanofibers Incorporating CuO.

An innovative colloidal approach is proposed here to carry out the customized functionalization of TEMPO-Oxidized Cellulose Nanofibers (CNF) incorporating non-noble inorganic nanoparticles. A heterocoagulation process is applied between the delignified CNF and as-synthetized CuO nanoparticles (CuO NPs) to formulate mixtures which are used in the preparation of aerogels with antibacterial effect, which could be used to manufacture membranes, filters, foams, etc. The involved components of formulated blending, CNF and CuO NPs, were individually obtained by using a biorefinery strategy for agricultural waste valorization, together with an optimized chemical precipitation, assisted by ultrasounds. The optimization of synthesis parameters for CuO NPs has avoided the presence of undesirable species, which usually requires later thermal treatment with associated costs. The aerogels-based structure, obtained by conventional freeze-drying, acted as 3D support for CuO NPs, providing a good dispersion within the cross-linked structure of the nanocellulose and facilitating direct contact of the antibacterial phase against undesirable microorganisms. All samples showed a positive response against Escherichia coli and Staphylococcus aureus. An increase of the antibacterial response of the aerogels, measured by agar disk diffusion test, has been observed with the increase of CuO NPs incorporated, obtaining the width of the antimicrobial "halo" (nwhalo) from 0 to 0.6 and 0.35 for S. aureus and E. coli, respectively. Furthermore, the aerogels have been able to deactivate S. aureus and E. coli in less than 5 h when the antibacterial assays have been analyzed by a broth dilution method. From CNF-50CuO samples, an overlap in the nanoparticle effect produced a decrease of the antimicrobial kinetic.

Special Issue "Lignocellulosic Biomass II".

As a result of human population growth, the availability of residual lignocellulosic materials from agriculture, forestry, food- and wood-processing industries, and other waste streams is continuously increasing [...].

Boosting functional properties of active-CMC films reinforced with agricultural residues-derived cellulose nanofibres.

The search for packaging alternatives that reduce the presence of non-biodegradable plastics in water is a focus of much research today. This fact, together with the increasing demand for active packaging capable of prolonging the shelf life of foodstuffs and the rise in the use of natural biopolymers such as cellulose, motivate the present work. This work evaluates CMC films loaded with gallic acid reinforced with (ligno)cellulose nanofibres from various agricultural residues as candidates for use in active food packaging. The first stage of the study involved the evaluation of different nanofibres as the reinforcing agent in CMC films. Increasing proportions of nanofibres (1, 3, 5 and 10% w/w) from horticultural residues (H) and nanofibres from vine shoots (V), containing residual lignin (LCNF) and without it (CNF), and obtained by mechanical (M) or chemical (T) pretreatment, were studied. The results of this first stage showed that the optimum reinforcement effect was obtained with 3% H-MCNF or 3% V-MCNF, where up to 391% and 286% improvement in tensile strength was achieved, respectively. These films offered slightly improved UV-light blocking ability (40-55% UV-barrier) and water vapor permeability (20-30% improvement) over CMC. Next, bioactive films were prepared by incorporating 5 and 10% wt of gallic acid (GA) over the optimised formulations. It was found that the joint addition of cellulose nanofibres and GA enhanced all functional properties of the films. Mechanical properties improved to 70%, WVP to 50% and UV light blocking ability to 70% due to the synergistic effect of nanofibres and GA. Finally, the bioactive films exhibited potent antioxidant activity, 60-70% in the DPPH assay and >99% in the ABTS assay and high antimicrobial capacity against S. aureus.

Performance simulation of solar cell based on AZO/CdTe heterostructure by SCAPS 1D software.

Simulation and analysis of solar cells based on the heterojunction of zinc oxide doped with aluminum (AZO) and cadmium telluride (CdTe) with the structure (Al/AZO/CdTe/NiO/Ni) using the Simulator of the capacitance of solar cells - 1 dimension (SCAPS-1D) has been presented in this paper. AZO is used as a window layer and Nickel oxide (NiO) has been introduced as a hole transport layer (HTL). Through the software, the effect of thickness, absorber (CdTe), and window (AZO) layers carrier concentration, operating temperature, and resistances (series and shunt) have been studied. Simulation results show that the solar cell performance can be greatly improved by adjusting the layer's thickness and carrier concentration, obtaining optimal values of 10 nm and 10 18 c m - 3 for the AZO layer, while for the CdTe layer they were 2 µm and 10 15 c m - 3 . The optimum series and shunt resistances are in the range of 1-3 Ω c m 2 and 1800-2200 Ω c m 2 respectively. A maximum power conversion efficiency (PCE) of 14.2% is achieved with an open circuit voltage (Voc) of 0.74 V, short circuit current density (Jsc) of 26.15 m A / c m 2 and a fill factor (FF) of 72.83%, this shows AZO potential to be considered as an interesting material to replace CdS window layer.

Bioactive Absorbent Chitosan Aerogels Reinforced with Bay Tree Pruning Waste Nanocellulose with Antioxidant Properties for Burger Meat Preservation.

As a transition strategy towards sustainability, food packaging plays a crucial role in the current era. This, carried out in a biorefinery context of agricultural residues, involves not only obtaining desirable products but a comprehensive utilization of biomass that contributes to the circular bioeconomy. The present work proposes the preparation of bioactive absorbent food pads through a multi-product biorefinery approach from bay tree pruning waste (BTPW). In a first step, chitosan aerogels reinforced with lignocellulose and cellulose micro/nanofibers from BTPW were prepared, studying the effect of residual lignin on the material's properties. The presence of micro/nanofibers improved the mechanical performance (up to 60%) in addition to increasing the water uptake (42%) when lignin was present. The second step was to make them bioactive by incorporating bay leaf extract. The residual lignin in the micro/nanofibers was decisive, since when present, the release profiles of the extract were faster, reaching an antioxidant power of more than 85% after only 30 min. Finally, these bioactive aerogels were used as absorbent pads for fresh meat. With the use of the bioactive aerogels (with ≥2% extract), the meat remained fresh for 10 days as a result of delayed oxidation of the food during storage (20% metmyoglobin proportion).

Nanocellulose from Spanish Harvesting Residues to Improve the Sustainability and Functionality of Linerboard Recycling Processes.

The hornification processes undergone by the fibers in the paper industry recycling processes lead to the loss of properties of the final products, which exhibit poor mechanical properties. Among the most promising solutions is the reinforcement of secondary fibers with cellulose nanofibers. The present work addresses two important issues: the efficient production of cellulose nanofibers from scarcely exploited agricultural wastes such as horticultural residues and vine shoots, and their application as a reinforcement agent in recycled linerboard recycling processes. The effect of the chemical composition and the pretreatment used on the nanofibrillation efficiency of the fibers was analyzed. Chemical pretreatment allowed a significantly higher nanofibrillated fraction (45−63%) than that produced by mechanical (18−38%), as well as higher specific surface areas (>430 m2/g). The application of the nanofibers as a reinforcing agent in the recycled linerboard considerably improved the mechanical properties (improvements of 15% for breaking length, 220−240% for Young's modulus and 27% for tear index), counteracting the loss of mechanical properties suffered during recycling when using chemically pretreated cellulose nanofibers from horticultural residues and vine shoots. It was concluded that this technology surpasses the mechanical reinforcement produced by conventional mechanical refining used in the industry and extends the number of recycling cycles of the products due to the non-physical modification of the fibers.

Monitoring of Thermal Comfort and Air Quality for Sustainable Energy Management inside Hospitals Based on Online Analytical Processing and the Internet of Things.

There is a need to ensure comfortable conditions for hospital staff and patients from the point of view of thermal comfort and air quality so that they do not affect their performance. We consider the need for hospital employees and patients to enjoy conditions of greater well-being during their stay. This is understood as a comfortable thermal sensation and adequate air quality, depending on the task they are performing. The contribution of this article is the formulation of the fundamentals of a system and platform for monitoring thermal comfort and Indoor Air Quality (IAQ) in hospitals, based on an Internet of Things platform composed of a low-cost sensor node network that is capable of measuring critical variables such as humidity, temperature, and Carbon Dioxide (CO2). As part of the platform, a multidimensional data model with an On-Line Analytical Processing (OLAP) approach is presented that offers query flexibility, data volume reduction, as well as a significant reduction in query response times. The experimental results confirm the suitability of the platform's data model, which facilitates operational and strategic decision making in complex hospitals.

FCS-MPC with Nonlinear Control Applied to a Multicell AFE Rectifier.

The use of controlled power converters has been extended for high power applications, stacking off-the-shelve semiconductors, and allowing the implementation of, among others, AC drives for medium voltages of 2.3 kV to 13.8 kV. For AC drives based on power cells assembled with three-phase diode rectifiers and cascaded H-bridge inverters, a sophisticated input multipulse transformer is required to reduce the grid voltage, provide isolation among the power cells, and compensate for low-frequency current harmonics generated by the diode-based rectifiers. However, this input multipulse transformer is bulky, heavy, and expensive and must be designed according to the number of power cells, not allowing total modularity of the AC drives based on cascade H-bridges. This study proposes and evaluates a control strategy based on a finite control set-model predictive control that emulates the harmonic cancellation performed by an input multipulse transformer in a cascade H-bridge topology. Hence, the proposed method requires conventional input transformers and replaces the three-phase diode rectifiers. As a result, greater modularity than the conventional multicell converter and improved AC overall input current with a THD as low as 2% with a unitary displacement power factor are achieved. In this case, each power cell manages its own DC voltage using a nonlinear control strategy, ensuring stable system operation for passive and regenerative loads. The experimental tests demonstrated the correct performance of the proposed scheme.

Effectiveness of a Conversational Chatbot (Dejal@bot) for the Adult Population to Quit Smoking: Pragmatic, Multicenter, Controlled, Randomized Clinical Trial in Primary Care.

BACKGROUND: Tobacco addiction is the leading cause of preventable morbidity and mortality worldwide, but only 1 in 20 cessation attempts is supervised by a health professional. The potential advantages of mobile health (mHealth) can circumvent this problem and facilitate tobacco cessation interventions for public health systems. Given its easy scalability to large populations and great potential, chatbots are a potentially useful complement to usual treatment. OBJECTIVE: This study aims to assess the effectiveness of an evidence-based intervention to quit smoking via a chatbot in smartphones compared with usual clinical practice in primary care. METHODS: This is a pragmatic, multicenter, controlled, and randomized clinical trial involving 34 primary health care centers within the Madrid Health Service (Spain). Smokers over the age of 18 years who attended on-site consultation and accepted help to quit tobacco were recruited by their doctor or nurse and randomly allocated to receive usual care (control group [CG]) or an evidence-based chatbot intervention (intervention group [IG]). The interventions in both arms were based on the 5A's (ie, Ask, Advise, Assess, Assist, and Arrange) in the US Clinical Practice Guideline, which combines behavioral and pharmacological treatments and is structured in several follow-up appointments. The primary outcome was continuous abstinence from smoking that was biochemically validated after 6 months by the collaborators. The outcome analysis was blinded to allocation of patients, although participants were unblinded to group assignment. An intention-to-treat analysis, using the baseline-observation-carried-forward approach for missing data, and logistic regression models with robust estimators were employed for assessing the primary outcomes. RESULTS: The trial was conducted between October 1, 2018, and March 31, 2019. The sample included 513 patients (242 in the IG and 271 in the CG), with an average age of 49.8 (SD 10.82) years and gender ratio of 59.3% (304/513) women and 40.7% (209/513) men. Of them, 232 patients (45.2%) completed the follow-up, 104/242 (42.9%) in the IG and 128/271 (47.2%) in the CG. In the intention-to-treat analysis, the biochemically validated abstinence rate at 6 months was higher in the IG (63/242, 26%) compared with that in the CG (51/271, 18.8%; odds ratio 1.52, 95% CI 1.00-2.31; P=.05). After adjusting for basal CO-oximetry and bupropion intake, no substantial changes were observed (odds ratio 1.52, 95% CI 0.99-2.33; P=.05; pseudo-R2=0.045). In the IG, 61.2% (148/242) of users accessed the chatbot, average chatbot-patient interaction time was 121 (95% CI 121.1-140.0) minutes, and average number of contacts was 45.56 (SD 36.32). CONCLUSIONS: A treatment including a chatbot for helping with tobacco cessation was more effective than usual clinical practice in primary care. However, this outcome was at the limit of statistical significance, and therefore these promising results must be interpreted with caution. TRIAL REGISTRATION: Clinicaltrials.gov NCT03445507; https://tinyurl.com/mrnfcmtd. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): RR2-10.1186/s12911-019-0972-z.

Comparison of the Anti-inflammatory Properties of Two Nicotinic Acetylcholine Receptor Ligands, Phosphocholine and pCF3-diEPP.

Activation of nicotinic acetylcholine receptors (nAChRs) expressed by innate immune cells can attenuate pro-inflammatory responses. Silent nAChR agonists, which down-modulate inflammation but have little or no ionotropic activity, are of outstanding clinical interest for the prevention and therapy of numerous inflammatory diseases. Here, we compare two silent nAChR agonists, phosphocholine, which is known to interact with nAChR subunits α7, α9, and α10, and pCF3-N,N-diethyl-N'-phenyl-piperazine (pCF3-diEPP), a previously identified α7 nAChR silent agonist, regarding their anti-inflammatory properties and their effects on ionotropic nAChR functions. The lipopolysaccharide (LPS)-induced release of interleukin (IL)-6 by primary murine macrophages was inhibited by pCF3-diEPP, while phosphocholine was ineffective presumably because of instability. In human whole blood cultures pCF3-diEPP inhibited the LPS-induced secretion of IL-6, TNF-α and IL-1ß. The ATP-mediated release of IL-1ß by LPS-primed human peripheral blood mononuclear leukocytes, monocytic THP-1 cells and THP-1-derived M1-like macrophages was reduced by both phosphocholine and femtomolar concentrations of pCF3-diEPP. These effects were sensitive to mecamylamine and to conopeptides RgIA4 and [V11L; V16D]ArIB, suggesting the involvement of nAChR subunits α7, α9 and/or α10. In two-electrode voltage-clamp measurements pCF3-diEPP functioned as a partial agonist and a strong desensitizer of classical human α9 and α9α10 nAChRs. Interestingly, pCF3-diEPP was more effective as an ionotropic agonist at these nAChRs than at α7 nAChR. In conclusion, phosphocholine and pCF3-diEPP are potent agonists at unconventional nAChRs expressed by monocytic and macrophage-like cells. pCF3-diEPP inhibits the LPS-induced release of pro-inflammatory cytokines, while phosphocholine is ineffective. However, both agonists signal via nAChR subunits α7, α9 and/or α10 to efficiently down-modulate the ATP-induced release of IL-1ß. Compared to phosphocholine, pCF3-diEPP is expected to have better pharmacological properties. Thus, low concentrations of pCF3-diEPP may be a therapeutic option for the treatment of inflammatory diseases including trauma-induced sterile inflammation.

Cellulose nanofibers/PVA blend polymeric beads containing in-situ prepared magnetic nanorods as dye pollutants adsorbents.

Magnetic beads were developed from polyvinyl alcohol and different amounts of cellulose nanofibers (CNF) by in-situ preparation of iron oxide nanoparticles in an alkaline aqueous medium at room temperature. The CNF were isolated from wheat straw, whereas the magnetic nanoparticles (MNPs) precursors were simple iron salts. The complete characterization of all the obtained materials was conducted, and among some other outstanding results it showed that all the components were strongly interacting via hydrogen bonding, while the nano-rods and husks like MNPs were effectively acting as crosslinking dots. All the prepared materials had good magnetic responses, and they were able to remove not only cationic, but also anionic dye pollutants from aqueous model solutions.

Paving the Way for a Green Transition in the Design of Sensors and Biosensors for the Detection of Volatile Organic Compounds (VOCs).

The efficient and selective detection of volatile organic compounds (VOCs) provides key information for various purposes ranging from the toxicological analysis of indoor/outdoor environments to the diagnosis of diseases or to the investigation of biological processes. In the last decade, different sensors and biosensors providing reliable, rapid, and economic responses in the detection of VOCs have been successfully conceived and applied in numerous practical cases; however, the global necessity of a sustainable development, has driven the design of devices for the detection of VOCs to greener methods. In this review, the most recent and innovative VOC sensors and biosensors with sustainable features are presented. The sensors are grouped into three of the main industrial sectors of daily life, including environmental analysis, highly important for toxicity issues, food packaging tools, especially aimed at avoiding the spoilage of meat and fish, and the diagnosis of diseases, crucial for the early detection of relevant pathological conditions such as cancer and diabetes. The research outcomes presented in the review underly the necessity of preparing sensors with higher efficiency, lower detection limits, improved selectivity, and enhanced sustainable characteristics to fully address the sustainable manufacturing of VOC sensors and biosensors.

Cellulose Nanofiber-Based Aerogels from Wheat Straw: Influence of Surface Load and Lignin Content on Their Properties and Dye Removal Capacity.

Water pollution is one of the most serious problems worldwide. Nanocellulose-based aerogels usually show excellent adsorption capacities due to their high aspect ratio, specific surface area and surface charge, making them ideal for water purification. In this work, (ligno)cellulose nanofibers (LCNFs/CNFs) from wheat straw residues were obtained using two types of pre-treatments: mechanical (Mec) and TEMPO-mediated oxidization (TO), to obtain different consistency (0.2, 0.4, 0.6 and 0.8) bioaerogels, and their adsorption capacities as dye removers were further studied. The materials were characterized in terms of density, porosity and mechanical properties. An inversely proportional relationship was observed between the consistencies of the aerogels and their achieved densities. Despite the increase in density, all samples showed porosities above 99%. In terms of mechanical properties, the best results were obtained for the 0.8% consistency LCNF and CNF-Mec aerogels, reaching 67.87 kPa and 64.6 kPa for tensile strength and Young's modulus, respectively. In contrast, the adsorption capacity of the aerogels was better for TEMPO-oxidized aerogels, reaching removal rates of almost 100% for the CNF-TO5 samples. Furthermore, the residual lignin content in LCNF-Mec aerogels showed a great improvement in the removal capacity, reaching rates higher than 80%, further improving the cost efficiency of the samples due to the reduction in chemical treatments.

Lignocellulose Nanofibre Obtained from Agricultural Wastes of Tomato, Pepper and Eggplants Improves the Performance of Films of Polyvinyl Alcohol (PVA) for Food Packaging.

Films formulated with polyvinyl alcohol (PVA) (synthetic biopolymer) were reinforced with lignocellulose nanofibres (LCNF) from residues of vegetable production (natural biopolymer). The LCNF were obtained by mechanical and chemical pre-treatment by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) and added to the polyvinyl alcohol (polymer matrix) with the aim of improving the properties of the film for use in food packaging. The mechanical properties, crystallinity, thermal resistance, chemical structure, antioxidant activity, water barrier properties and optical properties (transparency and UV barrier), were evaluated. In general, with the addition of LCNF, an improvement in the studied properties of the films was observed. In terms of mechanical properties, the films reinforced with 7% LCNF TEMPO showed the best results for tensile strength, Young's modulus and elongation at break. At the same LCNF proportion, the thermal stability (Tmax) increased between 5.5% and 10.8%, and the antioxidant activity increased between 90.9% and 191.8%, depending on the raw material and the pre-treatment used to obtain the different LCNF. Finally, a large increase in UV blocking was also observed with the addition of 7% LCNF. In particular, the films with 7% of eggplant LCNF showed higher performance for Young's modulus, elongation at break, thermal stability and UV barrier. Overall, results demonstrated that the use of LCNF generated from agricultural residues represents a suitable bioeconomy approach able to enhance film properties for its application in the development of more sustainable and eco-friendly food packaging systems.

Cellulose Nanofibers from Olive Tree Pruning as Food Packaging Additive of a Biodegradable Film.

A biodegradable packaging film containing cellulose nanofibers from olive tree pruning, a by-product of olives production, was obtained using a solvent casting method. Nanocellulose was added to polyvinyl alcohol (PVA) to enhance the technological properties of the composite film as food packaging material. Nanocellulose was obtained from unbleached and bleached pulp through a mechanical and TEMPO pretreatment. Crystalline and chemical structure, surface microstructure, UV and gas barrier, optical, mechanical and antioxidant properties, as well as thermal stability were evaluated. Regarding optical properties, the UV barrier was increased from 6% for the pure PVA film to 50% and 24% for unbleached and bleached nanocellulose, respectively. The antioxidant capacity increased significantly in unbleached mechanical nanocellulose-films (5.3%) compared to pure PVA film (1.7%). In terms of mechanical properties, the tensile strength of the 5% unbleached mechanical nanocellulose films was significantly improved compared to the pure PVA film. Similarly, the 5% nanocellulose films had increased the thermal stability and improved barrier properties, reducing water vapor permeability by 38-59% and presenting an oxygen barrier comparable to aluminum layer and plastic films. Our results support the use of the developed films as a green alternative material for food packaging.

Special Issue "Lignocellulosic Biomass".

The use of lignocellulosic biomass as potential raw material for fractionation and transformation into high value-added products or energy is gathering the attention of scientists worldwide in seeking to achieve a green transition in our production systems [...].