Morphometrics of the Southern Green Stink Bug [Nezara viridula (L.) (Hemiptera: Pentatomidae)] Stylet Bundle.

The southern green stink bug, Nezara viridula (L.) (Hemiptera: Pentatomidae), is a cosmopolitan pest of high-value cash crops, including cotton (Gossypium hirsutum L.; Malvales: Malvaceae). The pest can ingest and transmit disease-causing bacterial and fungal pathogens of cotton. We hypothesized that the size of the food canal may contribute to selective transmission, as observed in previous reports. The objective of this study was to examine food canal size and other morphometric parameters of the southern green stink bug stylet bundle at two locations (labium and head) to improve our understanding of factors that may contribute to pathogen transmission. For the food canal, females possessed significantly larger canals than males, major axes were significantly longer than minor axes, and canal sizes were numerically higher at the labium compared with the head. For salivary canal, mean axes lengths were similar between sexes and the head and labium. For both food and salivary canals, axes lengths were longer and area was larger at the labium compared with the head. These findings indicate the presence of a "funnel effect" with canals becoming narrower proximally. Sex and location significantly affected the size of the intact stylet bundle. Results indicate the food canal size was not a factor affecting previously observed selective passive transmission. Major and minor axes measurements, coupled with morphological observations of canal shapes and observed "funnel effect" in the food and salivary canals, improve our understanding of the hemipteran stylet bundle and its relationship with the insect's internal morphology.

Stylet Penetration Estimates for a Suite of Phytophagous Hemipteran Pests of Row Crops.

Members of the Miridae (Lygus lineolaris Palisot de Beauvois and Pseudatomoscelis seriatus Reuter) and Pentatomidae (Acrosternum hilare Say, Euschistus servus (Say), Euschistus tristigmus (Say), Euschistus quadrator Rolston, Oebalus pugnax (F.), Piezodorus guildinii (Westwood), and Thyanta custator accerra McAtee) comprise a piercing-sucking insect complex that continues to plague multiple crops, including cotton. All these species have been associated with pathogen transmission. Breaching of boll carpel walls facilitates introduction of pathogens, and it is unknown whether stylets of these pests can fully penetrate carpel walls. Thus, stylet penetration estimates are needed and have been the focus of the present work. Stylet penetration estimates for L. lineolaris were significantly deeper than P. seriatus. Among the Pentatomidae, highest mean penetration was estimated for E. servus followed by A. hilare, yet A. hilare possessed a longer rostrum. Similarly, O. pugnax showed deeper penetration estimates than P. guildinii yet P. guildinii possessed a longer rostrum. Thus, rostrum length should not be equated to penetration potential. Pseudatomoscelis seriatus and L. lineolaris both infest early-season cotton, and the ranges of observed penetration indicate these insects, as well as the Pentatomidae, can breach the walls of critical pinhead squares and smaller bolls. The insects addressed herein affect a myriad of crops globally, and penetration estimates allow identification of growth stages susceptible to feeding and disease transmission.

Ingestion of a marked bacterial pathogen of cotton conclusively demonstrates feeding by first instar southern green stink bug (Hemiptera: Pentatomidae).

Long-held dogma dictates that first instars of Nezara viridula (L.) do not feed, yet recent observations of stylet activity within a food source suggest otherwise. As a cosmopolitan pest of cotton and other high-value cash crops, confirmation of feeding by first instars may ultimately influence the knowledge on biology and management strategies for this pest. To determine whether first instars feed, newly hatched nymphs were provided sterile green beans (control) or beans infected with a rifampicin-resistant marked bacterial pathogen (Pantoea agglomerans (Ewing and Fife)) of cotton. Insects were exposed to beans for 2 d, and feeding was confirmed based on detection of marked bacteria ingested by the insect. Normal bacterial flora was detected in all insects; however, control insects did not possess the marked bacteria. Of the first instars surviving on infected beans, ≍65% possessed the marked bacteria internally. Furthermore, the frequency of insects with marked bacteria was higher in insects collected directly from the bean surface than those that were off the bean at time of collection. Densities of innate and marked bacteria were comparable (both ranging from 10(1) to 10(3)), suggesting that the marked bacteria did not exclude preexisting bacterial flora. Marked bacteria were also detected in a subset of second instars, indicating marked bacteria were retained through the molting process after ingesting bacteria as first instars. Our findings conclusively demonstrate feeding by first instars and redefine the long-held perspective of nonfeeding by first instars. These findings may necessitate changes to crop protection strategies against feeding and vectoring of plant pathogens by N. viridula.

Identification of cotton fleahopper (Hemiptera: Miridae) host plants in central Texas and compendium of reported hosts in the United States.

The cotton fleahopper, Pseudatomoscelis seriatus (Reuter), is an early-season pest of developing cotton in Central Texas and other regions of the Cotton Belt. Cotton fleahopper populations develop on spring weed hosts and move to cotton as weed hosts senesce or if other weed hosts are not readily available. To identify weed hosts that were seasonably available for the cotton fleahopper in Central Texas, blooming weed species were sampled during early-season (17 March-31 May), mid-season (1 June-14 August), late-season (15 August-30 November), and overwintering (1 December-16 March) periods. The leading hosts for cotton fleahopper adults and nymphs were evening primrose (Oenothera speciosa T. Nuttall) and Mexican hat [Ratibida columnifera (T. Nuttall) E. Wooton and P. Standley], respectively, during the early season. During the mid-season, silver-leaf nightshade (Solanum elaeagnifolium A. Cavanilles) was consistently a host for fleahopper nymphs and adults. Woolly croton (Croton capitatus A. Michaux) was a leading host during the late season. Cotton fleahoppers were not collected during the overwintering period. Other suitable hosts were available before previously reported leading hosts became available. Eight previously unreported weed species were documented as temporary hosts. A compendium of reported hosts, which includes >160 plant species representing 35 families, for the cotton fleahopper is provided for future research addressing insect-host plant associations. Leading plant families were Asteraceae, Lamiaceae, and Onagraceae. Results presented here indicate a strong argument for assessing weed species diversity and abundance for the control of the cotton fleahopper in the Cotton Belt.

Host plants of the tarnished plant bug (Heteroptera: Miridae) in Central Texas.

The tarnished plant bug, Lygus lineolaris (Palisot de Beauvois), has taken on added importance as a pest of cotton in the Cotton Belt after successful eradication efforts for the boll weevil (Anthonomus grandis grandis Boheman). Because the Southern Blacklands region of Central Texas is in advanced stages of boll weevil eradication, blooming weeds and selected row crops were sampled during a 3-yr study to determine lygus species composition and associated temporal host plants. L. lineolaris was the sole lygus species in the region. Thirteen previously unreported host plants were identified for L. lineolaris, of which 69% supported reproduction. Rapistrum rugosum L. Allioni and Ratibida columnifera (Nuttall) Wooton and Standley were primary weed hosts during the early season (17 March to 31 May). Conyza canadensis L. Cronquist variety canadensis and Ambrosia trifida L. were primary weed hosts during the midseason (1 June to 14 August) and late-season (15 August to 30 November), respectively. Sisymbrium irio L. and Lamium amplexicaule L. sustained L. lineolaris populations during the overwintering period (1 December to 16 March). The proportion of females and numbers of nymphs found in R. rugosum, C. canadensis, A. trifida, and S. irio suggests these weeds supported reproductive adults during the early, mid-, and late season and overwintering period, respectively. Medicago sativa L. was the leading crop host for L. lineolaris; Glycine max L. Merrill did not yield L. lineolaris. Few L. lineolaris were collected in Gossypium hirsutum L. These results provide a more comprehensive assessment of host plants contributing to L. lineolaris populations in central Texas.

Transmission of cotton seed and boll rotting bacteria by the southern green stink bug (Nezara viridula L.).

AIMS: To determine the ability of the southern green stink bug (SGSB) (Nezara viridula L.) to transmit Pantoea agglomerans into cotton (Gossypium hirsutum) bolls. METHODS AND RESULTS: An SGSB laboratory colony was kept on fresh green beans. A P. agglomerans variant resistant to rifampicin (Rif) (strain Sc 1-R) was used as the opportunistic cotton pathogen. Adult insects were individually provided green beans that were sterilized and then soaked in either sterile water or in a suspension of strain Sc 1-R. Insects were individually caged with an unopened greenhouse-grown cotton boll. After 2 days, live SGSB were collected, surfaced sterilized, ground, serially diluted, and then plated on nonselective media and media amended with Rif. Exterior and interior evidence of feeding on bolls was recorded 2 weeks after exposure to insects. Seed and lint tissue were harvested, ground, serially diluted, and then plated on media with and without Rif. Bacteria were recovered on nonselective media from all insects, and from seed and lint with signs of insect feeding at concentrations ranging from 10(2) to 10(9) CFU g(-1) tissue. The Sc 1-R strain was isolated only from insects exposed to the marked strain and from seed and lint of respective bolls showing signs of insect feeding. Evidence of insect feeding on the exterior wall of the carpel was not always apparent (47%), whereas feeding was always observed (100%) on the interior wall in association with bacterial infections of seed and lint. CONCLUSIONS: Nezara viridula readily ingested the opportunistic P. agglomerans strain Sc 1-R and transmitted it into unopened cotton bolls. Infections by the transmitted Sc 1-R strain caused rotting of the entire locule that masked internal carpel wounds incurred by insect feeding. Bacteria were recovered from penetration points by insects not exposed to the pathogen, but locule damage was limited to the area surrounding the feeding site (c. 3 mm). SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first study that demonstrates the ability of SGSB to acquire and transmit plant pathogenic bacteria into cotton bolls.

Evaluation of puncture types as indicators of boll weevil (Coleoptera: Curculionidae) oviposition in cotton squares.

Reproductive boll weevil populations are typically identified by the presence of a frass seal and protuberance at the oviposition site in cotton squares. However, despite the occurrence of other oviposition puncture seal types and their use in previous fecundity studies, the relationship of these respective puncture seal types and oviposition has not been clearly examined. In this study, newly eclosed females (

Population patterns of Mexican corn rootworm (Coleoptera: Chrysomelidae) adults indicated by different sampling methods.

The Mexican corn rootworm, Diabrotica virgifera zeae Krysan & Smith, is a serious pest of corn, Zea mays L., in several areas of Texas. Recent demonstrations of areawide adult control suggest this tactic has promise for rootworm management, but additional information regarding treatment thresholds and sampling methodology is needed. In 2000 and 2001 we examined the influence of distance into the field on rootworm captures by CRW and Pherocon AM traps, the fidelity of trap captures to population estimates from visual counts of beetles on plants (whole plant samples), and the seasonal population patterns indicated by each sampling method. Only the CRW trap consistently indicated reduced trap captures at the field margin compared with other distances. However, trends for the AM trap and whole plant samples suggested sampling on the field margin should be avoided. Population estimates at other distances into the field (2-30 m) were usually statistically similar. Thus, monitoring does not require trap placement far into the field. Both trap types indicated population peaks after flowering in corn, whereas plant samples indicated peak populations during tasseling and flowering. Both the CRW trap and plant samples showed the proportion of female beetles increased as the season progressed, but the CRW trap underestimated the proportion of females until after flowering. Regressions relating captures by traps to counts from plant samples indicated efficiency of both traps increased with increasing plant development. Our findings should increase acceptance of the CRW trap by producers and consultants and provide a rationale for development of improved, plant growth stage-specific treatment thresholds.

Citrus pollen retention by adult Helicoverpa zea (Lepidoptera: Noctuidae) after exposure to citrus blooms.

In previous migration studies, the presence of citrus pollen on adult Helicoverpa zea (Boddie), in conjunction with synoptic weather systems and 72-h backtrack trajectories, were used to identify source zones of migrants. However, data are lacking regarding the retention of citrus pollen for 72-h by H. zea adults. We exposed laboratory-reared and feral H. zea adults to citrus blooms for a 12-h period in laboratory and field studies and examined insects for the external presence of citrus pollen (i.e., marking) at 12-h intervals through 72 h. Citrus pollen marking was higher for females than males at the time of removal from citrus blooms. Fifteen to 100% of H. zea adults were marked with citrus pollen at 72 h after removal from citrus blooms. Pollen loads ranged from rare (< or = 10 pollen grains) to moderate (101 to 500 grains) during 1995; only rare and light (11 to 100 grains) pollen loads were detected during 1996. Citrus pollen marking of H. zea adults through 72 h after removal from citrus blooms has not been previously confirmed. These data provide evidence of H. zea using available blooming citrus groves in the absence of a host crop and will impact current perspectives regarding H. zea and host plant interactions and timing of pest management tactics.

Control of bias in randomized controlled trials published in prosthodontic journals.

STATEMENT OF PROBLEM: Randomized controlled trials (RCTs) have become the gold standard for evaluating the effectiveness of treatment interventions. If not properly controlled, bias in the design of trial methodology can affect the validity of the study results. PURPOSE: The purpose of this investigation was to assess the methodological quality of RCTs published in 3 prosthodontic journals over a 10-year period. MATERIAL AND METHODS: Issues of The International Journal of Prosthodontics, The Journal of Prosthetic Dentistry, and The Journal of Prosthodontics published between 1988 and 1997 were searched manually to identify RCTs. Specific inclusion and exclusion criteria were established to identify articles about studies that qualified as RCTs. Two independent reviewers evaluated all qualified RCTs on the basis of how potential sources of bias in the trial methodology were controlled. Three areas-control of bias at entry, control of bias in assessment of outcome, and control of bias after entry-were evaluated with a scheme developed through the Cochrane Collaboration. A score of 1 or 0 was assigned for each of the 3 potential sources of bias, with the maximum quality score for an RCT being 3 (good bias control) and the minimum 0 (poor control). Frequencies were calculated for each dimension of trial methodology and overall quality scores of the RCTs. RESULTS: Sixty-two RCTs were identified from 3631 articles screened. The method of randomization was explicit in only 47% of the RCTs. Forty percent of RCTs incorporated blinding in the assessment of outcome, and 76% accounted for all subjects at the end of the study. Overall quality scores revealed that only 16% of RCTs attempted to control bias in all 3 areas examined. Forty percent were deficient in 1 area, 34% were deficient in 2 areas, and 10% were deficient in all areas examined. CONCLUSION: The quality of RCTs published in prosthodontic journals may be improved by minimizing potential sources of bias and adequately reporting trial methodology.

Options for the fabrication of provisional restorations for ITI solid abutments.

In this article, 4 techniques for fabricating provisional restorations for ITI solid abutments are described. The use of a burn-out coping, acrylic resin coping, impression cap, and protective cap are presented, and the advantages and disadvantages of each are discussed.

Assessment of MEDLINE search strategies for randomized controlled trials in prosthodontics.

PURPOSE: The purpose of this study was to evaluate the sensitivity, specificity, and precision of MEDLINE search strategies for detecting randomized controlled trials (RCTs) in prosthodontics. MATERIALS AND METHODS: A list of RCTs was obtained by hand-searching the International Journal of Prosthodontics, Journal of Prosthetic Dentistry, and Journal of Prosthodontics published between 1988 and 1997. RCTs identified served as the "gold standard" with which different MEDLINE search strategies were compared. Subject headings, keywords, MEDLINE checktags, publication types, and combinations thereof were used, and their results were compared with the "gold standard". RESULTS: Sensitivity ranged from 9% to 67%, specificity was at least 96% for all searches, and precision ranged from 22% to 59%. The most productive searches were by publication type clinical trial and publication type randomized controlled trial. Combining search terms did not improve sensitivity for detecting RCTs published in prosthodontic journals (p > .10). CONCLUSION: These findings support the need for more detailed reporting of trial methodologies to facilitate accurate indexing of prosthodontic articles in MEDLINE.

Developing a register for randomized controlled trials in prosthodontics: results of a search from prosthodontic journals published in the United States.

STATEMENT OF PROBLEM: Treatment decisions are often made despite absence of evidence from well-conducted clinical trials. Conclusions about treatment efficacy derived from nonexperimental approaches often overestimate treatment effect. Randomized controlled trials (RCTs) provide the most reliable basis for evaluating effectiveness of treatment interventions. PURPOSE: This study attempted to identify and catalog RCTs in prosthodontic journals published in the United States as an initial step in creating a register of clinical trials that would be a resource in setting up systemic overviews of prosthodontic literature. METHODS: The International Journal of Prosthodontics, The Journal of Prosthetic Dentistry, and The Journal of Prosthodontics published between 1988 and 1997 were searched manually to identify clinical trials. Clinical trials had to meet the following criteria for inclusion in the register: the trial must involve human subjects, must include at least 2 treatment groups, and treatment group allocation must be randomized. RESULTS: A total of 3,631 articles in 196 journal issues were screened. Sixty-two articles (1.7%) met the minimum criteria for inclusion in the RCT register. CONCLUSION: Given the lack of randomized controlled trials in prosthodontic journals, a concerted effort by the organized prosthodontic community should be made to screen national and international journals and contribute to the development of a register of randomized controlled trials relevant to prosthodontics.

Simplifying the bead-brush technique.

This article describes a method of controlling monomer addition using the bead-brush technique. With the addition of a cotton pellet to the monomer, incorporation of liquid can adequately be controlled.

Stable matrix for amalgam build-up.

A method is proposed of making amalgam build-ups for coronally debilitated teeth through the use of a stable matrix consisting of a disposable tray and polyvinylsiloxane occlusal registration material. For teeth with minimal remaining coronal tooth structure and/or the absence of adjacent teeth, this technique provides proper stabilization of the matrix band to permit adequate condensation of amalgam.

Selective-pressure single impression procedure for tooth-mucosa-supported removable partial dentures.

This article describes a method of making impressions for tooth-mucosa-supported removable partial dentures using a single impression procedure. Through the use of border-molded custom trays, selectively relieved, and application of pressure on residual ridge areas, the objectives of maximum tissue coverage and selective tissue placement of primary stress-bearing areas are fulfilled. With a single impression procedure, treatment time is reduced and laboratory errors commonly encountered with the altered cast impression technique can be minimized or eliminated.

The physical properties of low-fusing porcelains for titanium.

This study compared the firing shrinkages, flexural strengths, and chemical solubilities of two low-fusing porcelains formulated for use with titanium (Procera, Nobel Biocare, Göteborg, Sweden; and Duceratin, Degussa, Plainfield, NJ) to those of a conventional low-fusing feldspathic porcelain (Vita VMK 68, Vident, Baldwin Park, CA). Procera demonstrated the highest mean firing shrinkage and was significantly different from the other two porcelains. There were no significant differences among the porcelains in flexural strength and chemical solubility.

Polyvinyl siloxane template aids in recontouring natural teeth opposing single dentures.

This article describes a procedure that provides proper reduction of natural teeth opposing complete dentures. By use of a polyvinyl siloxane prosthetic template, natural dentition can be reduced to a more favorable plane, which will facilitate denture construction. This procedure will eliminate the risk of arbitrary grinding and will minimize guesswork through guided intraoral reduction.

Repair of implant overdenture clip attachments: technical note.

A technique is described for repositioning the clip attachments of implant overdentures during repair or relining procedures using a direct method. During maintenance procedures, clip attachments must be repositioned correctly to prevent torquing of the bar and abutments and precautions taken to avoid locking the prosthesis to the undercut areas of the bar. This technique ensures proper positioning of the attachments and decreases the amount of polymerization shrinkage.

Color stability of low-fusing porcelains for titanium.

The resistance to staining of two low-fusing porcelains (Procera and Duceratin) for use with titanium and one conventional feldspathic porcelain (Vita VMK 68) were examined visually according to a protocol similar to the ADA Specification No. 69. The color deviation was also quantified using a colorimeter. Forty samples of each product were prepared using manufacturer's instructions and the samples divided into two groups of 20. The samples of one group were immersed in methylene blue, and the control group in distilled water. Of the twenty samples from each group, ten were ground to remove the glaze. The color values for each sample were recorded prior to and after immersion in the staining medium. The color deviation value, Delta E, for each sample was calculated. Visually discernible stain was present on the unglazed samples of all three porcelain products immersed in methylene blue. No stain was visually detectable on the glazed samples or the unglazed samples immersed in distilled water for all three porcelain products. The objective evaluation confirmed that the unglazed porcelain products had statistically higher color deviation after immersion in methylene blue.