Encapsulation of Vitamin C by Glycerol-Derived Dendrimers, Their Interaction with Biomimetic Models of Stratum corneum and Their Cytotoxicity.

Vitamin C is one of the most sensitive cosmetic active ingredients. To avoid its degradation, its encapsulation into biobased carriers such as dendrimers is one alternative of interest. In this work, we wanted to evaluate the potential of two biobased glycerodendrimer families (GlyceroDendrimers-Poly(AmidoAmine) (GD-PAMAMs) or GlyceroDendrimers-Poly(Propylene Imine) (GD-PPIs)) as a vitamin C carrier for topical application. The higher encapsulation capacity of GD-PAMAM-3 compared to commercial PAMAM-3 and different GD-PPIs, and its absence of cytotoxicity towards dermal cells, make it a good candidate. Investigation of its mechanism of action was done by using two kinds of biomimetic models of stratum corneum (SC), lipid monolayers and liposomes. GD-PAMAM-3 and VitC@GD-PAMAM-3 (GD-PAMAM-3 with encapsulated vitamin C) can both interact with the lipid representatives of the SC lipid matrix, whichever pH is considered. However, only pH 5.0 is suggested to be favorable to release vitamin C into the SC matrix. Their binding to SC-biomimetic liposomes revealed only a slight effect on membrane permeability in accordance with the absence of cytotoxicity but an increase in membrane rigidity, suggesting a reinforcement of the SC barrier property. Globally, our results suggest that the dendrimer GD-PAMAM-3 could be an efficient carrier for cosmetic applications.

Synthesis and Activity of Ionic Antioxidant-Functionalized PAMAMs and PPIs Dendrimers.

For this study, new dendrimers were prepared from poly(propylene imine) (PPI) and polyamidoamine (PAMAM) dendrimers using an efficient acid-base reaction with various phenolic acids. The syntheses were also optimized in both microwave and microfluidic reactors. These ionic and hydrophilic dendrimers were fully characterized and showed excellent antioxidant properties. Their cytotoxic properties have been also determined in the case of fibroblast dermal cells.

Continuous Flow Upgrading of Selected C2-C6 Platform Chemicals Derived from Biomass.

The ever increasing industrial production of commodity and specialty chemicals inexorably depletes the finite primary fossil resources available on Earth. The forecast of population growth over the next 3 decades is a very strong incentive for the identification of alternative primary resources other than petro-based ones. In contrast with fossil resources, renewable biomass is a virtually inexhaustible reservoir of chemical building blocks. Shifting the current industrial paradigm from almost exclusively petro-based resources to alternative bio-based raw materials requires more than vibrant political messages; it requires a profound revision of the concepts and technologies on which industrial chemical processes rely. Only a small fraction of molecules extracted from biomass bears significant chemical and commercial potentials to be considered as ubiquitous chemical platforms upon which a new, bio-based industry can thrive. Owing to its inherent assets in terms of unique process experience, scalability, and reduced environmental footprint, flow chemistry arguably has a major role to play in this context. This review covers a selection of C2 to C6 bio-based chemical platforms with existing commercial markets including polyols (ethylene glycol, 1,2-propanediol, 1,3-propanediol, glycerol, 1,4-butanediol, xylitol, and sorbitol), furanoids (furfural and 5-hydroxymethylfurfural) and carboxylic acids (lactic acid, succinic acid, fumaric acid, malic acid, itaconic acid, and levulinic acid). The aim of this review is to illustrate the various aspects of upgrading bio-based platform molecules toward commodity or specialty chemicals using new process concepts that fall under the umbrella of continuous flow technology and that could change the future perspectives of biorefineries.

Sustaining the Transition from a Petrobased to a Biobased Chemical Industry with Flow Chemistry.

In the current context of transitioning to more sustainable chemical processes, the upgrading of biobased platform molecules (i.e., the chemical transformation of widely available low molecular weight entities from biomass) is attracting significant attention, in particular when combined with enabling continuous flow conditions. The success of this combination is largely due to the ability to explore new process conditions and the perspective of facilitating seamless scalability while maintaining a small overall footprint. This review considers representative continuous flow processes which utilize a selection of currently popular platform molecules that target industrially relevant building blocks, including (a) commodity chemicals, (b) specialty and fine chemicals, and (c) fuels and fuel additives.

Brønsted acids in ionic liquids: how acidity depends on the liquid structure.

Gutmann Acceptor Number (AN) values have been determined for Brønsted acid-ionic liquid mixtures, over a wide compositional range. Four systems of general formula [C2mim][A]-HA (A(-) = bistriflamide, [NTf2](-); triflate, [OTf](-); mesylate, [OMs](-); or acetate, [OAc](-), [C2mim](+) = 1-ethyl-3-methylimidazolium cation) were studied. A library of Brønsted acidic systems of varying acidity was constructed and the AN parameter was found to be a convenient approach for quantifying their acidity. HOAc, HOMs and HOTf, when dissolved in ionic liquids, were found to associate with the respective anions to form hydrogen-bonded anionic clusters, [A(HA)x](-). In contrast, HNTf2 was solubilised as a discrete, undissociated molecule. AN values were sensitive to the presence of anionic clusters; acidity could be buffered to a particular AN by binding the solubilised acid in the anionic cluster form. Overall, a simple way to manipulate and quantify the Brønsted acidity of acid-ionic liquid mixtures was demonstrated, and measured AN values were related to liquid speciation.

Chlorostannate(II) ionic liquids: speciation, Lewis acidity, and oxidative stability.

The anionic speciation of chlorostannate(II) ionic liquids, prepared by mixing 1-alkyl-3-methylimidazolium chloride and tin(II) chloride in various molar ratios, χ(SnCl2), was investigated in both solid and liquid states. The room temperature ionic liquids were investigated by (119)Sn NMR spectroscopy, X-ray photoelectron spectroscopy, and viscometry. Crystalline samples were studied using Raman spectroscopy, single-crystal X-ray crystallography, and differential scanning calorimetry. Both liquid and solid systems (crystallized from the melt) contained [SnCl(3)](-) in equilibrium with Cl(-) when χ(SnCl(2)) < 0.50, [SnCl(3)](-) in equilibrium with [Sn(2)Cl(5)](-) when χ(SnCl(2)) > 0.50, and only [SnCl(3)](-) when χ(SnCl(2)) = 0.50. Tin(II) chloride was found to precipitate when χ(SnCl(2)) > 0.63. No evidence was detected for the existence of [SnCl(4)](2-) across the entire range of χ(SnCl(2)), although such anions have been reported in the literature for chlorostannate(II) organic salts crystallized from organic solvents. Furthermore, the Lewis acidity of the chlorostannate(II)-based systems, expressed by their Gutmann acceptor number, has been determined as a function of the composition, χ(SnCl(2)), to reveal Lewis acidity for χ(SnCl(2)) > 0.50 samples comparable to the analogous systems based on zinc(II). A change of the Lewis basicity of the anion was estimated using (1)H NMR spectroscopy, by comparison of the measured chemical shifts of the C-2 hydrogen in the imidazolium ring. Finally, compositions containing free chloride anions (χ(SnCl(2)) < 0.50) were found to oxidize slowly in air to form a chlorostannate(IV) ionic liquid containing the [SnCl(6)](2-) anion.

Electrochemical synthesis of indium(0) nanoparticles in haloindate(III) ionic liquids.

A synthetic route to indium(0) nanoparticles via an electrochemical reduction of haloindate(III) ionic liquids to indium(I), and its subsequent disproportionation to indium(0) and indium(III) in the bulk electrolyte, is described. In this sustainable method, the ionic liquid acts simultaneously as metal source, templating agent, and stabilising agent, with the electron as the only reducing agent. The nature of the ionic liquid cation is demonstrated to strongly affect the morphology and size distribution of the indium(0) nanoparticles.

Validation of speciation techniques: a study of chlorozincate(II) ionic liquids.

The speciation of chlorozincate(II) ionic liquids, prepared by mixing 1-octyl-3-methylimidazolium chloride, [C(8)mim]Cl, and zinc(II) chloride in various molar ratios, χ(ZnCl(2)), was investigated using Raman spectroscopy and differential scanning calorimetry; the Gutmann acceptor number, which is a quantitative measure of Lewis acidity, was also determined as a function of the composition. These results were combined with literature data to define the anionic speciation; in the neat liquid phase, the existence of Cl(-), [ZnCl(4)](2-), [Zn(2)Cl(6)](2-), [Zn(3)Cl(8)](2-), and [Zn(4)Cl(10)](2-) anions was confirmed. From two chlorozincate(II) ionic liquids with [C(2)mim](+) cations (χ(ZnCl(2)) = 0.33 and χ(ZnCl(2)) = 0.50), crystals have been obtained, revealing the structures of [C(2)mim](2)[ZnCl(4)] and [C(2)mim](2)[Zn(2)Cl(6)] forming three-dimensional hydrogen-bond networks. The compound [C(2)mim](2){Zn(4)Cl(10)} was crystallized from the χ(ZnCl(2)) = 0.75 composition, showing an open-framework structure, with the first example of zinc in a trigonal-bipyramidal chloride coordination. Reinvestigation of the electrospray ionization mass spectrometry of these systems demonstrated that it is an unreliable technique to study liquid-phase speciation.

Swift and efficient sono-hydrolysis of nitriles to carboxylic acids under basic condition: role of the oxide anion radical in the hydrolysis mechanism.

Carboxylic acids are promising candidates for new sustainable strategies in organic synthesis. In this paper, we ascertain the potential of ultrasound for the hydrolysis of nitriles into carboxylic acids through the study of key parameters of the reaction: pH, hydrolysis medium, reaction time and activation technique. The positive influence of ultrasound under basic conditions is due to more than mechanical effects of cavitation. Indeed, the rate of hydrolysis is dramatically increased under sonication in NaOH solutions. A radical mechanism involving the oxide anion radical O(*-) is proposed.

Reusable task-specific ionic liquids for a clean ε-caprolactam synthesis under mild conditions.

Brønsted-acidic ionic liquids that bear a sulfonic acid group, known as Forbes acids, show a good catalytic activity for the Beckmann rearrangement, used to prepare ε-caprolactam, which is a precursor of Nylon 6. The activity essentially stems from the acidity of the sulfonic acid group. Although these task specific ionic liquids suffer from a high viscosity, this drawback can be circumvented at higher temperatures. A combination of the hydrogen sulfate anion and the sulfonic acid group of the cation is needed to obtain the rearrangement product rapidly under mild conditions. When using an excess of ionic liquid, we postulate that the internal pressure of the ionic medium, generated by the high viscosity and the high number of hydrogen-bonds, is strong enough to contribute to a decrease of the thermodynamic barrier. In accordance with the "Principles of Green Chemistry," we have developed a synthesis of ε-caprolactam that requires no additional chemicals except cyclohexanone oxime and the reusable TSIL.

Chlorometallate(III) ionic liquids as Lewis acidic catalysts--a quantitative study of acceptor properties.

The Gutmann Acceptor Number (AN), which is a quantitative measure of Lewis acidity, has been estimated using the (31)P NMR chemical shift of a probe molecule, triethylphosphine oxide, for a range of chlorometallate(III) ionic liquids, based on Group 13 metals (aluminium(III), gallium(III) and indium(III)) and the 1-octyl-3-methylimidazolium cation, at different compositions. The results were interpreted in terms of extant speciation studies of chlorometallate(III) ionic liquids, and compared with a range of standard molecular solvents and acids. The value of these data were illustrated in terms of the selection of appropriate ionic liquids for specific applications.

A new ozone denuder for aerosol sampling based on an ionic liquid coating.

A new ionic liquid 1-octyl-3,5-dimethylpyridinium iodide ([O35LUT](+)[I](-)) was synthesized and utilized as coating for an ozone denuder device based on a high-volume aerosol sampler (30 m(3) h(-1)). Particle transmission of the denuder was studied, and over 99% of particles ranging from 10 to 2,500 nm were transmitted. The device, containing 4.66 g of ionic liquid, was used outdoors, under dry and damp atmospheric conditions. In order to expose the device to an average concentration of 120 ppbv (240 microg m(-3)) of ozone in air, an additional production of ozone was directly injected into the denuder. Under these conditions, over 97% of ozone was removed for approximately 120 h (5 days). Therefore, iodide-based ionic liquids can be used as a new alternative to conventional denuder coatings in order to reduce artifacts occurring during sampling of particulate matter. Future applications are not limited to ozone removal for specific aerosol sampling methods.

Preparation of second generation ionic liquids by efficient solvent-free alkylation of N-heterocycles with chloroalkanes.

Non-conventional techniques, such as microwave (MW) and power ultrasound (US) as well as combined MW/US irradiation, have been used to promote one-pot synthesis of second-generation ionic liquids (ILs), cutting down reaction times and improving yields. However, the use of chloroalkanes in the alkylation of N-heterocycles requires more drastic conditions if results are to match those obtained with more reactive alkyl halides. The present paper describes a series of MW- or MW/US-promoted IL preparations starting from chloroalkanes and classic heterocycles (1-methylimidazole, pyridine and 1-methylpyrrolidine). When reactions were carried out under conventional heating in an oil bath they required longer reaction times and gave poorer yields. (1)H-NMR analysis and ion-exchange chromatography showed that the present solventless procedure afforded ILs of satisfactory purity. The observed high yields (usually 70-98% isolated), and short reaction times showed that a straightforward access to ILs can be also achieved with the use of alkyl chlorides, resulting in a considerable reduction of costs.