Biomarkers of Organophosphate and Polybrominated Diphenyl Ether (PBDE) Flame Retardants of American Workers and Associations with Inhalation and Dermal Exposures.

This study evaluated workers' exposures to flame retardants, including polybrominated diphenyl ethers (PBDEs), organophosphate esters (OPEs), and other brominated flame retardants (BFRs), in various industries. The study aimed to characterize OPE metabolite urinary concentrations and PBDE serum concentrations among workers from different industries, compare these concentrations between industries and the general population, and evaluate the likely route of exposure (dermal or inhalation). The results showed that workers from chemical manufacturing had significantly higher (p <0.05) urinary concentrations of OPE metabolites compared to other industries. Spray polyurethane foam workers had significantly higher (p <0.05) urinary concentrations of bis(1-chloro-2-propyl) phosphate (BCPP) compared to other industries. Electronic scrap workers had higher serum concentrations of certain PBDE congeners compared to the general population. Correlations were observed between hand wipe samples and air samples containing specific flame-retardant parent chemicals and urinary metabolite concentrations for some industries, suggesting both dermal absorption and inhalation as primary routes of exposure for OPEs. Overall, this study provides insights into occupational exposure to flame retardants in different industries and highlights the need for further research on emerging flame retardants and exposure reduction interventions.

Compare the marginal effects for environmental exposure and biomonitoring data with repeated measurements and values below the limit of detection.

BACKGROUND: Environmental exposure and biomonitoring data with repeated measurements from environmental and occupational studies are commonly right-skewed and in the presence of limits of detection (LOD). However, existing model has not been discussed for small-sample properties and highly skewed data with non-detects and repeated measurements. OBJECTIVE: Marginal modeling provides an alternative to analyzing longitudinal and cluster data, in which the parameter interpretations are with respect to marginal or population-averaged means. METHODS: We outlined the theories of three marginal models, i.e., generalized estimating equations (GEE), quadratic inference functions (QIF), and generalized method of moments (GMM). With these approaches, we proposed to incorporate the fill-in methods, including single and multiple value imputation techniques, such that any measurements less than the limit of detection are assigned values. RESULTS: We demonstrated that the GEE method works well in terms of estimating the regression parameters in small sample sizes, while the QIF and GMM outperform in large-sample settings, as parameter estimates are consistent and have relatively smaller mean squared error. No specific fill-in method can be deemed superior as each has its own merits. IMPACT: Marginal modeling is firstly employed to analyze repeated measures data with non-detects, in which only the mean structure needs to be correctly provided to obtain consistent parameter estimates. After replacing non-detects through substitution methods and utilizing small-sample bias corrections, in a simulation study we found that the estimating approaches used in the marginal models have corresponding advantages under a wide range of sample sizes. We also applied the models to longitudinal and cluster working examples.

Laboratory study of physical barrier efficiency for worker protection against SARS-CoV-2 while standing or sitting.

Transparent barriers were installed as a response to the SARS-COV-2 pandemic in many customer-facing industries. Transparent barriers are an engineering control that intercept particles traveling between customers and workers. Information on the effectiveness of these barriers against aerosols is limited. In this study, a cough simulator was used to represent a cough from a customer. Two optical particle counters were used (one on each side of the barrier, labeled customer and worker) to determine the number of particles that migrated around a transparent barrier. Ten configurations were tested with six replicates for both sitting and standing scenarios, representing nail salons and grocery stores, respectively. Barrier efficiency was calculated using a ratio of the particle count results (customer/worker). Barriers had better efficiency (up to 93%) when its top was 9 to 39 cm above cough height and its width was at least 91 cm. Barriers that extended 91 cm above table height for both scenarios blocked 71% or more of the particles between 0.35-0.725 µm and 68% for particles between 1 to 3 µm. A barrier that blocked an initial cough was effective at reducing particle counts. While the width of the barriers was not as significant as the height in determining barrier efficiency it is important that a barrier be placed where interactions between customers and workers are most frequent. Bystander exposure was not taken into consideration along with other limitations.

Exposure assessment of polycyclic aromatic hydrocarbons in refined coal tar sealant applications.

BACKGROUND: Refined coal tar sealant (RCTS) emulsions are used to seal the surface of asphalt pavement. Nine of the 22 polycyclic aromatic hydrocarbons (PAHs) evaluated in this study are classified as known, probable, or possible human carcinogens. Exposure assessment research for RCTS workers has not been published previously. OBJECTIVES: The overall objective of this study was to develop a representative occupational exposure assessment of PAH exposure for RCTS workers based on worksite surveys. The specific aims were to: 1) quantify full-shift airborne occupational exposures to PAHs among RCTS workers; 2) quantify workers' dermal exposures to PAHs; 3) quantify biomarkers of PAH exposure in workers' urine; 4) identify specific job titles associated with RCTS exposure; and 5) apply these results to a biological exposure index to assess risk of potential genotoxicity from occupational exposures. METHODS: A total of twenty-one RCTS workers were recruited from three companies. Personal and area air samples were collected using a modification of NIOSH Method 5515. Dermal exposure was assessed by hand and neck wipes before and after shifts. Twenty-two PAHs were quantified via gas chromatography-mass spectrometry selected ion monitoring. Internal dose was estimated by quantifying select PAH metabolites in pre- and post-shift urine samples using on-line solid phase extraction-high performance liquid chromatography-tandem mass spectrometry. RESULTS: PAH levels in the worker breathing zones were highest for naphthalene, acenaphthene, and phenanthrene, with geometric means of 52.1, 11.4, and 9.8 µg/m3, respectively. Hand wipe levels of phenanthrene, fluoranthene and pyrene were the highest among the 22 PAHs with geometric means of 7.9, 7.7, and 5.5 µg/cm2, respectively. Urinary PAH biomarkers for naphthalene, fluorene, phenanthrene, and pyrene were detected in all workers and were higher for post-shift samples than those collected pre-shift. Urinary concentrations of the metabolite 1-hydroxypyrene were greater than the American Conference of Governmental Industrial Hygienists (ACGIH) Biological Exposure Index (BEI) for this metabolite in 89 percent of post-shift samples collected on the final day of the work week or field survey. Statistically significances were found between concentrations of fluorene, naphthalene, and phenanthrene in the breathing zone of workers and their corresponding urinary PAH biomarkers. Workers were placed in two work place exposure groups: applicators and non-applicators. Applicators had higher total PAH concentrations in personal breathing zone (PBZ) air samples than non-applicators and were more likely to have post-shift hand wipe concentrations significantly higher than pre-shift concentrations. Concentrations of post-shift urinary biomarkers were higher, albeit not significantly, for applicators than non-applicators. CONCLUSIONS: The exposure results from RCTS worker samples cannot be explained by proximal factors such as nearby restaurants or construction. Air and skin concentration levels were substantially higher for RCTS workers than previously published levels among asphalt workers for all PAHs. PAH profiles on skin wipes were more consistent with RCTS sealant product than air samples. Last day post-shift urinary concentrations of 1-hydroxypyrene greatly exceeded the ACGIH BEI benchmark of 2.5 µg/L in 25 of 26 samples, which suggests occupational exposure and risk of genotoxicity. When pyrene and benzo[a]pyrene were both detected, concentration ratios from personal exposure samples were used to calculate the adjusted BEI. Concentrations of 1-hydroxypyrene exceeded the adjusted BEIs for air, hand wipes, and neck wipes in most cases. These results indicate the need to increase safety controls and exposure mitigation for RCTS workers.

Assessment of triphenyl phosphate (TPhP) exposure to nail salon workers by air, hand wipe, and urine analysis.

Triphenyl phosphate (TPP or TPhP) is commonly used as an additive plasticizer or organophosphate flame retardant (OPFR) in consumer products including nail polish. We evaluated exposure to TPhP from 12 nail salon technicians working at four nail salons located in California over a period of two work days. Bulk samples of 15 nail polishes and other nail products were collected. Study participants also provided two personal air samples, two hand wipe samples (pre- and post-shift on day two), and two urine samples (pre-shift day one and post-shift day two). The geometric mean (GM) of TPhP air sampling concentrations was 7.39 ng/m3. Post-shift TPhP hand wipe concentrations (GM 1.35 µg/sample) were significantly higher (p = 0.024) than pre-shift hand wipe concentrations (GM 0.29 µg/sample). Diphenyl phosphate (DPP or DPhP), a urinary metabolite of TPhP used in this study as a biomarker of exposure, was detected in all post-shift urine samples and 75% of urine pre-shift samples. DPhP post-shift concentrations (GM 1.35 µg/g creatinine) were significantly higher than pre-shift concentrations (GM 0.84 µg/g creatinine; p = 0.012). In addition, DPhP post-shift concentrations were correlated with TPhP post-shift hand wipe concentrations, suggesting dermal contact may be a relevant exposure pathway for nail salon workers.

Worker exposure to flame retardants in manufacturing, construction and service industries.

Workers in several industries are occupationally exposed to flame retardants. This study characterizes flame retardant exposure for nine industries through air and hand wipe measures for 105 workers. Specifically, we analyzed 24 analytes from three chemical classes: organophosphate flame retardants (OFRs), polybrominated diphenyl ethers (PBDEs), and non-PBDE brominated flame retardants (NPBFRs). The industries were: carpet installation, chemical manufacturing, foam manufacturing, electronic scrap, gymnastics, rigid board installation, nail salons, roofing, and spray polyurethane foam. Workers wore personal air samplers for two entire workdays and provided hand wipe samples before and after the second work day. Bulk products were also analyzed. The air, hand wipe and bulk samples were evaluated for relevant flame retardants. Spray polyurethane foam workers' tris(1-chloro-2-propyl) phosphate air (geometric mean = 48,500 ng/m3) and hand wipe (geometric mean = 83,500 ng per sample) concentrations had the highest mean industry concentration of any flame retardant analyzed in this study, followed by triphenyl phosphate air concentration and tris(1,3-dichloro-2-propyl) phosphate hand wipe concentration from chemical manufacturers. Overall, OFR air and hand wipe concentrations were higher and more prevalent than PBDEs or non-PBDE brominated flame retardants. Some industries including spray polyurethane foam application, chemical manufacturing, foam manufacturing, nail salons, roofing, and rigid polyiso board installation had high potential for both air and hand exposure to OFRs. Carpet installers, electronic scrap workers, and gymnastic workers had exposures to all three classes of flame retardants including PBDEs, which were phased out of production in 2013. Air and dermal exposures to OFRs are prevalent in many industries and are replacing PBDEs in some industries.

Assessment of spray polyurethane foam worker exposure to organophosphate flame retardants through measures in air, hand wipes, and urine.

Tris(1-chloro-2-propyl) phosphate (TCPP, also referenced as TCIPP), a flame retardant used in spray polyurethane foam insulation, increases cell toxicity and affects fetal development. Spray polyurethane foam workers have the potential to be exposed to TCPP during application. In this study, we determined exposure to TCPP and concentrations of the urinary biomarker bis(1-chloro-2-propyl) phosphate (BCPP) among 29 spray polyurethane foam workers over 2 work days. Work was conducted at residential or commercial facilities using both open-cell (low density) and closed-cell (high density) foam. Study participants provided two personal air samples (Day 1 and Day 2), two hand wipe samples (Pre-shift Day 2 and Post-shift Day 2), and two spot urine samples (Pre-shift Day 1 and Post-shift Day 2). Bulk samples of cured spray foam were also analyzed. Sprayers were found to have significantly higher TCPP geometric mean (GM) concentration in personal air samples (87.1 µg/m3), compared to helpers (30.2 µg/m3; p = 0.025). A statistically significant difference was observed between TCPP pre- and post-shift hand wipe GM concentrations (p = 0.004). Specifically, TCPP GM concentration in post-shift hand wipe samples of helpers (106,000 ng/sample) was significantly greater than pre-shift (27,300 ng/sample; p < 0.001). The GM concentration of the urinary biomarker BCPP (23.8 µg/g creatinine) was notably higher than the adult male general population (0.159 µg/g creatinine, p < 0.001). Urinary BCPP GM concentration increased significantly from Pre-shift Day 1 to Post-shift Day 2 for sprayers (p = 0.013) and helpers (p = 0.009). Among bulk samples, cured open-cell foam had a TCPP GM concentration of 9.23% by weight while closed-cell foam was 1.68%. Overall, post-shift BCPP urine concentrations were observed to be associated with TCPP air and hand wipe concentrations, as well as job position (sprayer vs. helper). Spray polyurethane foam workers should wear personal protective equipment including air-supplied respirators, coveralls, and gloves during application.

Noise and neurotoxic chemical exposure relationship to workplace traumatic injuries: A review.

INTRODUCTION: More than 5,000 fatalities and eight million injuries occurred in the workplace in 2007 at a cost of $6 billion and $186 billion, respectively. Neurotoxic chemicals are known to affect central nervous system functions among workers, which include balance and hearing disorders. However, it is not known if there is an association between exposure to noise and solvents and acute injuries. METHOD: A thorough review was conducted of the literature on the relationship between noise or solvent exposures and hearing loss with various health outcomes. RESULTS: The search resulted in 41 studies. Health outcomes included: hearing loss, workplace injuries, absence from work due to sickness, fatalities, hospital admissions due to workplace accidents, traffic accidents, hypertension, balance, slip, trips, or falls, cognitive measures, or disability retirement. Important covariates in these studies were age of employee, type of industry or occupation, or length of employment. DISCUSSION: Most authors that evaluated noise exposure concluded that higher exposure to noise resulted in more of the chosen health effect but the relationship is not well understood. Studies that evaluated hearing loss found that hearing loss was related to occupational injury, disability retirement, or traffic accidents. Studies that assessed both noise exposure and hearing loss as risk factors for occupational injuries reported that hearing loss was related to occupational injuries as much or more than noise exposure. Evidence suggests that solvent exposure is likely to be related to accidents or other health consequences such balance disorders. CONCLUSIONS: Many authors reported that noise exposures and hearing loss, respectively, are likely to be related to occupational accidents. Practical applications: The potential significance of the study is that findings could be used by managers to reduce injuries and the costs associated with those injures.

Noise exposure reconstruction and evaluation of exposure trends in two large automotive plants.

This study used a task-based approach to reconstruct employee noise exposures at two large automotive manufacturing plants for the period 1970-1989, utilizing historic noise measurement data, work history records, documented changes in plant operations, focus group discussions, structured interviews with long-tenure employees, and task-based job profiles. Task-based job noise exposure profiles were developed in the 1990s when the plants conducted task-based noise monitoring. Under the assumption that tasks and time-at-task profile within jobs did not change over time, these profiles were applied to historic jobs. By linking historic noise exposure measurements to job tasks, this approach allowed task-based reconstructed noise exposure profiles to capture variability of daily noise exposures. Reconstructed noise exposures, along with task-based noise exposure measurements collected at each plant during the 1990s, were analyzed to examine time trends in workplace noise levels and worker noise exposure. Our analysis of noise exposure trends revealed that noise levels for many jobs declined by ≥3 dBA from 1970 to 1998 as operational and equipment changes occurred in the plants and some noise control measures were implemented, but for some jobs, noise levels increased in the mid- to late 1990s, most likely because of an increase in production at that time. Overall, the percentage of workers exposed to noise levels >90 dBA decreased from 95% in 1970 to 54% in 1998 at one of the plants and decreased from 36% in 1970 to ~5% in 1999 at the other plant. These reductions indicate a degree of success for the hearing conservation program. However, the actual number of employees with noise exposure >90 dBA increased because of a substantial increase in the number of production employees, particularly in jobs with high noise levels, which shows a hearing conservation program challenge that companies face during periods of increased production. Future analysis of hearing levels in these plant populations will help determine whether noise level reduction translates into decreased hearing loss at these plants.

Comparison of air sampling methods for aerosolized spores of B. anthracis Sterne.

Bacillus anthracis Sterne spores were aerosolized within a chamber at concentrations ranging from 1 x 10³ to 1.7 x 104 spores per cubic meter of air (particles (p)/m³) to compare three different sampling methods: Andersen samplers, gelatin filters, and polytetrafluoroethylene (PTFE) membrane filters. Three samples of each type were collected during each of 19 chamber runs. Chamber concentration was determined by an aerodynamic particle sizer (APS) for the size range of 1.114-1.596 µm. Runs were categorized (low, medium, and high) based on tertiles of the APS estimated air concentrations. Measured air concentrations and recovery efficiency [ratio of the measured (colony forming units (CFU)/m³) to the APS estimated (particles/m³) air concentrations] for the sampling methods were compared using mixed-effects regression models. Limits of detection for each method were estimated based on estimated recovery efficiencies. Mean APS estimated air concentrations were 1600 particles/m³, 4100 particles/m³, and 9100 particles/m³ at the low, medium, and high tertiles, respectively; coefficient of variation (CV) ranged from 25 to 40%. Statistically significant differences were not observed among the three sampling methods. At the high and medium tertiles, estimated correlations of measured air concentration (CFU/m³) among samples collected from the same run of the same type were high (0.73 to 0.93). Among samples collected from the same run but of different types, correlations were moderate to high (0.45 to 0.85); however, correlations were somewhat lower at the low tertile (-0.31 to 0.75). Estimated mean recovery efficiencies ranged from 0.22 to 0.25 CFU/particle with total CVs of approximately 84 to 97%. Estimated detection limits ranged from 35 to 39 particles/m³. These results will enable investigators to conduct environmental sampling, quantify contamination levels, and conduct risk assessments of B. anthracis.

Recovery efficiency and limit of detection of aerosolized Bacillus anthracis Sterne from environmental surface samples.

After the 2001 anthrax incidents, surface sampling techniques for biological agents were found to be inadequately validated, especially at low surface loadings. We aerosolized Bacillus anthracis Sterne spores within a chamber to achieve very low surface loading (ca. 3, 30, and 200 CFU per 100 cm(2)). Steel and carpet coupons seeded in the chamber were sampled with swab (103 cm(2)) or wipe or vacuum (929 cm(2)) surface sampling methods and analyzed at three laboratories. Agar settle plates (60 cm(2)) were the reference for determining recovery efficiency (RE). The minimum estimated surface concentrations to achieve a 95% response rate based on probit regression were 190, 15, and 44 CFU/100 cm(2) for sampling steel surfaces and 40, 9.2, and 28 CFU/100 cm(2) for sampling carpet surfaces with swab, wipe, and vacuum methods, respectively; however, these results should be cautiously interpreted because of high observed variability. Mean REs at the highest surface loading were 5.0%, 18%, and 3.7% on steel and 12%, 23%, and 4.7% on carpet for the swab, wipe, and vacuum methods, respectively. Precision (coefficient of variation) was poor at the lower surface concentrations but improved with increasing surface concentration. The best precision was obtained with wipe samples on carpet, achieving 38% at the highest surface concentration. The wipe sampling method detected B. anthracis at lower estimated surface concentrations and had higher RE and better precision than the other methods. These results may guide investigators to more meaningfully conduct environmental sampling, quantify contamination levels, and conduct risk assessment for humans.

Agreement between task-based estimates of the full-shift noise exposure and the full-shift noise dosimetry.

Noise assessments have been conducted using full-shift dosimetry and short-term task-based measurements. Advantages of the task-based method include the opportunity to directly identify high-noise exposure tasks and to target control measures, as well as obtain estimates of task-based full-shift exposures; however, there is little empirical evidence comparing the two methods. National Institute for Occupational Safety and Health assessed noise exposures at three industrial facilities using dosimetry and task-based methods with the objective of comparing the two strategies and assessing the degree of agreement and causes of disagreement. Eight indices of task-based full-shift exposures were created from task-based sampling using three methods to assess time-at-task (direct observation by industrial hygienist, end-of-shift worker estimates and supervisor estimates) and three methods to assign noise levels to tasks [direct measurement, arithmetic mean (AM) and geometric mean (GM)]. We assessed aspects of agreement (precision, bias and absolute agreement) using Bland-Altman plots and concordance correlation coefficient (CCC). Overall, the task-based methods worked fairly well, with mean biases less than +/-2.8 dBA and precision ranges of 3.3-4.4 dBA. By all measures, task-based full-shift estimates based on supervisor assessment of time-at-task agreed most poorly with the dosimetry data. The task-based full-shift estimates based on worker estimates of time-at-task generally agreed as well as those based on direct observation. For task noise level, task-based full-shift estimates based on directly measured task agreed the best with dosimetry data, while agreement for task-based indices based on task AM or GM was variable. Overall, the task-based full-shift estimates based on direct observation task and direct measured task noise level achieved the best agreement with the dosimetry data (CCC 0.84) with 95% of their differences being within 7.4 dBA and 56% of the differences <3 dBA. For this index, a high degree of accuracy was observed (accuracy coefficient = 0.96) with major cause of disagreement arising from a lack of precision (precision coefficient = 0.88). When the measurements were classified by job characteristics, significant improvements in the degree of agreement were observed in the low job mobility, low job complexity and low job variability categories. Our data suggest that a high degree of absolute agreement can be achieved between the task-based and dosimetry-based estimates of full-shift exposures. The task-based approach that uses worker reports combined with task AM or GM levels is similar to the more time-intensive direct observation method to estimate full-shift exposures.

Proportionate mortality study of the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry.

BACKGROUND: This study examined causes of deaths among unionized plumbers, pipefitters and allied trades. METHODS: Deaths of union members from the years 1971, 1979, 1987, and 1995 were selected as a representative sample from a computer file provided by the union. These years provided 15,411 deaths for proportionate mortality ratio (PMR) analysis. RESULTS: PMRs for lung cancer and asbestosis were significantly elevated compared to U.S. white males. PMRs for chronic disease of the endocardium and cardiomyopathy were also elevated. Elevations were not observed in other a priori causes: laryngeal cancer, lymphatic cancer, and neurological disorders. PMRs for transportation accidents for pipe/steam-fitters were elevated in 1971 and 1979, but not in 1987 or 1995. CONCLUSION: Despite the limitations of a PMR analysis, study results indicate mortality related to asbestos exposure is, and will continue to be, an area of concern for members of the union.

Research and dissemination needs for ergonomics in agriculture.

In 1998, the National Institute for Occupational Safety and Health convened a conference of researchers interested in the ergonomics of agricultural workers. Participants included 20 representatives from universities, state governments, private agricultural and insurance companies, migrant worker organizations, agricultural industry organizations, and the Agricultural Extension Service. The attendees divided into three groups and brainstormed about research ideas and dissemination methods related to ergonomics for farm workers. The groups separately reported that interventions, cost-benefit analyses, and cultural belief systems were the main topics that needed to be researched to reduce physical risk factors for musculoskeletal disorders. The participants also presented ideas for disseminating information to farm owners and workers.

Engineering controls for furniture strippers to meet the OSHA methylene chloride PEL.

This case study demonstrates how methylene chloride exposures during furniture stripping can be reduced to below the Occupational Safety and Health Administration (OSHA) permissible exposure limit (PEL) of 25 ppm (as an 8-hour time-weighted average). Five surveys were conducted at one facility; the first four resulted in employee exposure geometric means from 39 to 332 ppm. For the fifth survey local exhaust ventilation was used at the stripping tank and the rinsing area, which together exhausted 138 m3/min (4860 ft3/min). Additional controls included providing adequate make-up air, adding paraffin wax to the stripping solution, raising the level of the stripping solution in the tank, and discussing good work practices with the employee. The employees' methylene chloride exposures during the fifth survey resulted in a geometric mean of 5.6 ppm with a 95% upper confidence limit of 8.3 ppm, which was found to be significantly lower than the OSHA PEL and the OSHA action level of 12.5 ppm. The cost of the ventilation system was $8900.

The impact of maintenance and design for ventilation systems.

Ventilation systems need to be designed to include access for cleaning and preventive maintenance. Without such access, the exhaust volume will deteriorate. Because of access difficulties and the many demands on their time, plant managers are sometimes errant in performing proper preventive maintenance. Three surveys measuring workers' exposures to methylene chloride were conducted at the same furniture stripping facility. A new ventilation system was installed for the first survey, resulting in an exhaust volume of 2900 cfm and worker exposure to methylene chloride of 59 ppm (geometric mean). Immediately after the first survey, the gasoline-powered fan was replaced by a smaller capacity electrically powered fan. Deterioration in the ventilation system was seen after seven years. Problems included clogged slots, paint chips and sawdust deposits in plenums, and a loose and frayed fan belt. The second survey indicated a reduction in exhaust volume to 1060 cfm and increased worker exposure to 330 ppm. With the smaller capacity fan still in place, the system was otherwise upgraded to allow for easier access and maintenance was performed. The third survey showed that the ventilation system performance was better (exhaust volume improved to 2080 cfm) and the worker exposures were reduced to 73 ppm. This study shows the benefits of designing for preventive maintenance and the necessity of keeping the ventilation systems clean.

Simple Solutions: Ergonomics for Farm Workers

A educative document from the U.S. Department for Health and Human Services. It describes early intervention practices to reduce and prevent injuries in farm industry. The document offers simple practical solutions to common farm injuries. The ideas introduced can me adapted to many farming situations. Document in PDF format; Acrobat Reader required.