Analysis of Postoperative Complication and Revision Rates and Mid- to Long-Term Implant Survival in Primary Short-Stem Total Hip Arthroplasty.

Background/Objectives: Short-stem prostheses were introduced as an alternative to conventional straight-stem prostheses. Despite their benefits, including minimally invasive approaches, soft-tissue- and bone-sparing implantation, and physiological load transfer to the metaphysis, data on postoperative complication and revision rates as well as on implant survival are scarce. Methods: A retrospective analysis of 1327 patients who underwent primary total hip arthroplasty (THA) using the Metha® short stem between 2006 and 2023 was conducted. Complication and revision rates were analysed for the intraoperative, direct postoperative, and follow-up episodes. Implant survival was analysed with the endpoint of all-cause stem revision. Results: Intraoperative complications were observed in 3.77% of the cases and included 44 hairline cracks and 6 fractures. In 15 cases (30.0%), conversion to a straight-stem or revision implant was necessary. The direct postoperative complication rate was 2.44%, and 11 revision procedures were performed during inpatient stay (0.84%). Mean follow-up was 7 years (range 1-17). During follow-up, femoral component revision was performed in 60 cases. Aseptic loosening and stem subsidence accounted for a combined percentage of 80% of all indications. Implant survival rate was 95.66% after 5 years, 95.58% after 10 years, and 95.50% after 15 years. Conclusions: Our study provides a comprehensive analysis of postoperative complication and revision rates in a large sample undergoing primary short-stem THA. Postoperative complication rates were favourable, and the long-term implant survival rates were comparable to conventional straight-stem prostheses. Therefore, short-stem THA may be considered an alternative for younger patients.

Defining Distinct Stress Curve Morphologies for Coronal Plane Alignment of the Knee Phenotypes Using an Imageless Navigation Robotic Platform in Total Knee Arthroplasty.

BACKGROUND: The coronal plane alignment of the knee (CPAK) classification system divides coronal knee anatomy into 9 phenotypes, suggesting different soft tissue balancing is needed for optimal outcomes. We investigated the interplay between CPAK phenotypes and gap stress curves throughout the knee's range of motion, aiming to understand their impact on total knee arthroplasty balancing. METHODS: There were 1,112 total knee arthroplasty cases from 2 imageless robotic assisted navigation systems using posterior stabilized implants that were classified into CPAK phenotypes. Medial and lateral initial gap values were measured throughout the knee flexion-extension arc, gap curve morphologies were generated, and mediolateral (ML) gap balance was calculated for each phenotype. The most common phenotypes were included in this study, CPAK I to VI. RESULTS: Each phenotype exhibited a distinct gap curve morphology. Type I maintained the largest ML gap difference (-3.6 to -2.1), with the medial compartment tightest in extension. Type II showed relative laxity in the lateral compartment compared to the medial gap (-1.0 to -1.9), with the medial compartment tightening through flexion. Type III had a looser medial and tighter lateral compartment in extension that inverts to a tighter medial compartment in deep flexion (2.1 to -0.8), while Type IV showed a decreasing compartment difference with increased flexion (-3.7 to 0.6). Type V had fluctuating tightness (-0.6 to 1.8), and Type VI had the medial compartment tightening more with flexion (0.6 to 1.8). CONCLUSIONS: The distinct stress curves and ML gap behavior provide a "fingerprint" for each corresponding CPAK phenotype. Investigating these morphologies can help determine the best phenotype-specific treatments, including alignment strategy, implant selection, and gap balance, for optimal functional and patient outcomes.

Higher satisfaction and function scores in restricted kinematic alignment versus mechanical alignment with medial pivot design total knee arthroplasty: A prospective randomised controlled trial.

PURPOSE: Restricted kinematic alignment (rKA) in total knee arthroplasty (TKA) and medial pivot (MP) knee designs already showed superior outcomes in independent comparative studies. The objective of this study was to assess whether rKA with MP TKA provides better clinical and functional outcomes compared to mechanical alignment (MA) with MP TKA. METHODS: This is a randomised, parallel two group study involving a total of 98 patients with end-stage knee osteoarthritis. Patients were randomly allocated to either rKA or MA TKA procedures conducted with a MP prothesis using patient-specific instruments between 2017 and 2020. Final follow-up was at 2 years postoperatively. Demographic data and clinical and functional scores (Oxford knee score, knee society score [KSS], Western Ontario and McMaster Universities Osteoarthritis Index [WOMAC], forgotten joint score [FJS]) were collected and compared preoperative, 1 year postoperative and 2 years postoperative. Coronal plane alignment of the knee and functional knee phenotype classification were recorded. RESULTS: A total of 47 patients (rKA) and 51 patients (MA) were included in final analysis. Superior joint awareness scores (FJS) were found at 1 year postoperative for rKA (62.2 vs. 52.4, p = 0.04). KSS subscores (expectation score, satisfaction score) improved with rKA with significant differences at both 1 and 2 years postoperatively. Major differences between rKA and MA were found in subgroup analysis of varus and neutral CPAK phenotypes. Both 1 year and 2 years postoperatively, FJS was significantly better in KA compared with MA in varus CPAK phenotypes (63.1 vs. 44.9, p = 0.03; 71.1 vs. 46.0, p = 0.005). Further clinical and functional scores showed improvement in the varus CPAK phenotypes with predominantly significant improvement in the expectation and satisfaction KSS subscores. No significant differences were found in the comparison of rKA and MA in neutral CPAK phenotypes. CONCLUSION: The rKA of MP TKA design shows superior patient satisfaction and self-reported function when compared to MA MP TKA. Furthermore, rKA MP TKA shows superior joint awareness at early postoperative stage. The most important clinical relevance of this study is the clear superiority of rKA in varus phenotypes. LEVEL OF EVIDENCE: Level II.

Radiopacity Enhancements in Polymeric Implant Biomaterials: A Comprehensive Literature Review.

Polymers as biomaterials possess favorable properties, which include corrosion resistance, light weight, biocompatibility, ease of processing, low cost, and an ability to be easily tailored to meet specific applications. However, their inherent low X-ray attenuation, resulting from the low atomic numbers of their constituent elements, i.e., hydrogen (1), carbon (6), nitrogen (7), and oxygen (8), makes them difficult to visualize radiographically. Imparting radiopacity to radiolucent polymeric implants is necessary to enable noninvasive evaluation of implantable medical devices using conventional imaging methods. Numerous studies have undertaken this by blending various polymers with contrast agents consisting of heavy elements. The selection of an appropriate contrast agent is important, primarily to ensure that it does not cause detrimental effects to the relevant mechanical and physical properties of the polymer depending upon the intended application. Furthermore, its biocompatibility with adjacent tissues and its excretion from the body require thorough evaluation. We aimed to summarize the current knowledge on contrast agents incorporated into synthetic polymers in the context of implantable medical devices. While a single review was found that discussed radiopacity in polymeric biomaterials, the publication is outdated and does not address contemporary polymers employed in implant applications. Our review provides an up-to-date overview of contrast agents incorporated into synthetic medical polymers, encompassing both temporary and permanent implants. We expect that our results will significantly inform and guide the strategic selection of contrast agents, considering the specific requirements of implantable polymeric medical devices.

A 19-color single-tube full spectrum flow cytometry assay for the detection of measurable residual disease in acute myeloid leukemia.

Multiparameter flow cytometry (MFC) has emerged as a standard method for quantifying measurable residual disease (MRD) in acute myeloid leukemia. However, the limited number of available channels on conventional flow cytometers requires the division of a diagnostic sample into several tubes, restricting the number of cells and the complexity of immunophenotypes that can be analyzed. Full spectrum flow cytometers overcome this limitation by enabling the simultaneous use of up to 40 fluorescent markers. Here, we used this approach to develop a good laboratory practice-conform single-tube 19-color MRD detection assay that complies with recommendations of the European LeukemiaNet Flow-MRD Working Party. We based our assay on clinically-validated antibody clones and evaluated its performance on an IVD-certified full spectrum flow cytometer. We measured MRD and normal bone marrow samples and compared the MRD data to a widely used reference MRD-MFC panel generating highly concordant results. Using our newly developed single-tube panel, we established reference values in healthy bone marrow for 28 consensus leukemia-associated immunophenotypes and introduced a semi-automated dimensionality-reduction, clustering and cell type identification approach that aids the unbiased detection of aberrant cells. In summary, we provide a comprehensive full spectrum MRD-MFC workflow with the potential for rapid implementation for routine diagnostics due to reduced cell requirements and ease of data analysis with increased reproducibility in comparison to conventional FlowMRD routines.

The prognostic significance of surgical resection margins for local recurrence, distant metastasis, and overall survival in sarcoma.

BACKGROUND AND OBJECTIVES: Surgical resection with microscopically negative margins constitutes one of the key elements of a curative therapeutic approach for localized sarcomas. However, the prognostic value of quantitative margin width remains controversial. We sought to determine the prognostic significance of margin status and margin width for local recurrence (LR), distant recurrence (DR), and overall survival. METHODS: Retrospective analysis of 210 patients undergoing resection of localized sarcoma between 1997 and 2018 at a national sarcoma reference center. RESULTS: Logistic regression did not reveal an effect of metric margin width as a prognostic factor for LR (odds ratio [OR] = 0.98, p = 0.574), DR (OR = 1, p = 0.908), or overall survival (hazard ratio = 0.98, 95% confidence interval = 0.73-1.20, p = 0.609). Subgroup analysis revealed no differences between complete first resections (R0) and re-resections (re-R0) following unplanned R1-resections for LR (p = 0.727) and overall survival (p = 0.125), but a significantly higher DR-rate in re-R0 cases (p = 0.022). CONCLUSIONS: Achieving a negative margin is essential in sarcoma surgery, however, metric margin width was not associated with disease-specific outcomes. Re-resection of unplanned R1-resections should be performed to control for LR and overall survival rates. As re-R0 cases were at significantly higher risk of DR, these patients should be followed up closely in standardized surveillance protocols.

Comparable accuracy of femoral joint line reconstruction in different kinematic and functional alignment techniques.

PURPOSE: A key part of kinematic alignment (KA) and functional alignment (FA) is to restore the natural femoral joint line, in particular the medial joint line. KA is known to reproduce the femoral joint line accurately; however, direct comparisons with other surgical techniques such as FA are currently lacking. The purpose of this study was to evaluate differences of alignment parameters in KA and FA techniques with a special focus given to the femoral joint line. METHODS: We performed a retrospective radiological analysis of pre- and postoperative long leg radiographs of 221 consecutive patients with varus or neutral leg alignment, who underwent primary total knee arthroplasty (TKA) procedures from 2018 to 2020. Patients were assigned to one of four groups: (1) FA: image-based robotic-assisted TKA, (2) FA: imageless robotic-assisted TKA, (3): restricted KA: 3D cutting block-assisted (patient-specific instruments, PSI) TKA, (4): unrestricted KA: calipered technique. Patients' radiographs were (re)-analyzed for overall limb alignment, medial proximal tibial angle (MPTA), lateral distal femoral angle (LDFA), as well as medial and lateral femoral joint line alteration. Statistical significance was determined using unpaired t testing (FA vs. KA group) and one-way ANOVA (subgroup analyses). RESULTS: Comparisons of KA vs. FA, as well as individual subgroups of KA and FA did not show any differences in the accuracy of medial joint line reconstruction (< 2 mm, p = 0.384, p = 0.744, respectively) and LDFA alteration (< 2°, p = 0.997, 0.921, respectively). Correction of MPTA (3.4° vs. 2.2°) and lateral femoral joint line (2.1 mm vs. 1.5 mm) was higher for FA and FA subgroups compared to KA and KA subgroups (both p < 0.001). CONCLUSION: Kinematic and functional alignments showed a comparable accuracy in reconstruction of the medial femoral joint line and femoral joint line orientation. Increased correction of MPTA and lateral femoral joint line was recorded with FA techniques. LEVEL OF EVIDENCE: III.

[Kinematic Alignment of Total Knee Arthroplasty]. / Kinematisches Alignment bei der Knie-TEP-Implantation.

Nowadays, kinematic alignment is a widely used alignment philosophy in total knee arthroplasty. The concept of kinematic alignment respects the patient's individual prearthrotic anatomy and is based on the reconstruction of the femoral anatomy and thus the axes of motion of the knee joint. Only then the alignment of the tibial component is adapted to the femoral component. By means of this technique soft tissue balancing is reduced to a minimum. Due to the risk of excessive outlier alignment technical assistance or calipered techniques are recommended for precise implementation. This article attempts to provide an understanding of the fundamentals of kinematic alignment, and it focusses on how it differs from alternative alignment strategies and the way the philosophy is implemented in different surgical techniques.

Noise exposure during robot-assisted total knee arthroplasty.

The aim of the study was to examine the noise exposure for operating theater staff during total knee arthroplasty (TKA) with three different robot systems. There is already evidence that noise exposure during TKA performed manually exceeds recommended guidelines for occupational noise. Therefore, if surgical staff is exposed to it for several years, the development of noise-inducing hearing loss (NIHL) is significantly increased. To investigate the noise exposure during robot-assisted TKA, the study measured the average noise and the peak sound pressure during TKA with MAKO robot (Stryker, Kalamazoo, Michigan, United States), NAVIO robot (Smith and Nephew, London, Great Britain), and CORI robot (Smith and Nephew, London, Great Britain) using a class 1 sound level meter. Each robot system exceeds the recommended guidelines from the national institute for occupational safety and health. While the MAKO robot had the highest average sound level (93.18 dB(A)) of the three robot systems (NAVIO: 88.88 dB(A), CORI: 89.38 dB(A)), the peak sound level was the highest with the NAVIO Robot (134.48 dB(C)) compared to the MAKO Robot (128.98 dB(C)) and CORI robot (126.48 dB(C)). Robot-assisted TKA is a risk factor for NIHL, like manually performed TKA. Further research for decreasing the noise exposure during TKA is needed to minimize the hearing loss in operating theater staff.

Discharging the medial knee compartment: comparison of pressure distribution and kinematic shifting after implantation of an extra-capsular absorber system (ATLAS) and open-wedge high tibial osteotomy-a biomechanical in vitro analysis.

PURPOSE: Young and active patients suffering early degenerative changes of the medial compartment with an underlying straight-leg axis do face a therapeutical gap as unloading of the medial compartment cannot be achieved by high tibial osteotomy. Extracapsular absorbing implants were developed to close this existing therapeutical gap. Purpose of the present cadaveric biomechanical study was to compare the unloading effect of the knee joint after implantation of an extra-articular absorber system (ATLAS) in comparison to open-wedge high tibial osteotomy (OW-HTO) under physiological conditions. The hypothesis of the study was that implantation of an extra-capsular absorber results in an unloading effect comparable to the one achievable with OW-HTO. METHODS: Eight fresh-frozen cadaveric knees were tested under isokinetic flexion-extension motions and physiological loading using a biomechanical knee simulator. Tibiofemoral area contact and peak contact pressures were measured using pressure-sensitive film in the untreated medial compartment. The tibiofemoral superior-inferior, latero-medial translation and varus/valgus rotation were measured with a 3D tracking system Polaris. Pressures and kinematics changes were measured after native testing, ATLAS System implantation and OW-HTO (5° and 10° correction angles) performed with an angular stable internal fixator (TomoFix). RESULTS: The absorber device decreased the pressure in the medial compartment near full extension moments. Implantation of the ATLAS absorbing system according to the manufacturers' instruction did not result in a significant unloading effect. Deviating from the surgery manual provided by the manufacturer the implantation of a larger spring size while applying varus stress before releasing the absorber resulted in a significant pressure diminution. Contact pressure decreased significantly Δ0.20 ± 0.04 MPa p = 0.044. Performing the OW-HTO in 5° correction angle resulted in significant decreased contact pressure (Δ0.25 ± 0.10 MPa, p = 0.0036) and peak contact pressure (Δ0.39 ± 0.38 MPa, p = 0.029) compared with the native test cycle. With a 10° correction angle, OW-HTO significantly decreased area contact pressure by Δ0.32 ± 0.09 MPa, p = 0.006 and peak contact pressure by Δ0.48 ± 0.12 MPa, p = 0.0654 compared to OW-HTO 5°. Surgical treatment did not result in kinematic changes regarding the superior-inferior translation of the medial joint section. A significant difference was observed for the translation towards the lateral compartment for the ATLAS system Δ1.31 ± 0.54 MPa p = 0.022 and the osteotomy Δ3.51 ± 0.92 MPa p = 0.001. Furthermore, significant shifting varus to valgus rotation of the treated knee joint was verified for HTO 5° about Δ2.97-3.69° and for HTO 10° Δ4.11-5.23° (pHTO 5 = 0.0012; pHTO 10 = 0.0007) over the entire extension cycle. CONCLUSION: OW-HTO results in a significant unloading of the medial compartment. Implantation of an extra-capsular absorbing device did not result in a significant unloading until the implantation technique was applied against the manufacturer's recommendation. While the clinical difficulty for young and active patients with straight-leg axis and early degenerative changes of the medial compartment persists further biomechanical research to develop sufficient unloading devices is required.

Robotic-assisted TKA reduces surgery duration, length of stay and 90-day complication rate of complex TKA to the level of noncomplex TKA.

INTRODUCTION: Complex primary total knee arthroplasties (TKA) are reported to be associated with excessive episode of care (EOC) costs as compared to noncomplex procedures. The impact of robotic assistance (rTKA) on economic outcome parameters in greater case complexity has not been described yet. The purpose of this study was to investigate economic outcome parameters in the 90-days postoperative EOC in robotic-assisted complex versus noncomplex procedures. MATERIALS AND METHODS: This study is a retrospective, single-center review of 341 primary rTKAs performed between 2017 and 2020. Patient collective was stratified into complex (n = 218) and noncomplex TKA (n = 123) based on the presence of the following criteria: Obese BMI, coronal malalignment, flexion contracture > 10°, posttraumatic status, previous correction osteotomy, presence of hardware requiring removal during surgery, severe rheumatoid arthritis. Group comparison included surgery duration, length of stay (LOS), surgical site complications, readmissions, and revision procedures in the 90-days EOC following rTKA. RESULTS: The mean surgery duration was marginally longer in complex rTKA, but showed no significant difference (75.26 vs. 72.24 min, p = 0.258), neither did the mean LOS, which was 8 days in both groups (p = 0.605). No differences between complex and noncomplex procedures were observed regarding 90-days complication rates (7.34 vs. 4.07%, p = 0.227), readmission rates (3.67 vs. 3.25%, p = 0.841), and revision rates (2.29 vs. 0.81%, p = 0.318). CONCLUSIONS: Robotic-assisted primary TKA reduces the surgical time, inpatient length of stay as well as 90-days complication and readmission rates of complex TKA to the level of noncomplex TKA. Greater case complexity does not seem to have a negative impact on economic outcome parameters when surgery is performed with robotic assistance.

Drain fluid cultures can rule in but cannot rule out infection persistence after surgical treatment of periprosthetic joint infections.

BACKGROUND: Periprosthetic joint infection (PJI) is one of the most common reason for implant failure in arthroplasty. Surgical therapy is essential but there is no standardized guideline to determine infection eradication in multiple-step revision surgery. To date, clinical and laboratory inflammation markers and preoperative arthrocentesis are controversial to evaluate the infection status before reimplantation and therefore are often combined. Drain fluid cultures enable a microbiological analysis without need for further invasive procedure after revision surgery. This retrospective study evaluates the diagnostic performance of drain fluid cultures in diagnosing infection persistence according to the MSIS definition of PJI. METHODS: Drain samples have been taken after every revision surgery for microbiological testing. Afterwards, the results have been assigned to the infection status according to the diagnostic criteria of the MSIS definition of PJI. RESULTS: 1084 revision surgeries in 183 patients have been included, resulting in a total sample size of 1552 drain fluid cultures. Overall sensitivity was 36.0%, specificity was 90.7% and ROC-AUC was 0.63. CONCLUSION: Due to a high specificity and a low sensitivity drain fluid cultures can rule in but cannot rule out infection persistence in PJI.

Improved joint line and posterior offset restoration in primary total knee replacement using a robotic-assisted surgical technique: An international multi-centre retrospective analysis of matched cohorts.

BACKGROUND: Accurate restoration of joint line height and posterior offset in primary Total Knee Arthroplasty (TKA) have been shown to be important factors in post-operative range of movement and function. The aim of this study was to assess the accuracy of joint line and posterior offset restoration in a group of patients that underwent robotic-assisted TKA (raTKA). A matched cohort of patients that underwent a TKA using a conventional jig-based technique was assessed for comparison. The null hypothesis was that there would be no difference between groups. METHODS: This study was a retrospective analysis of a cohort of 120 patients with end-stage knee osteoarthritis that received a TKA using the Navio Surgical System (n = 60), or Conventional manual TKA (n = 60). Procedures were performed between 1 January 2019 and 1 October 2019 at six different centres. Joint line height and posterior offset was measured pre-operatively and post-operatively on calibrated weight bearing plain radiographs of the knee. Two observers performed measurements using validated measuring tools. A BMI and age-matched cohort of patients that underwent TKA using a conventional technique in the same six centres were assessed for comparison. Mean values, standard deviations and confidence intervals are presented for change and absolute change in joint line height and posterior offset. Student's t-test was used to compare the changes between techniques. RESULTS: Patients that underwent robotic-assisted TKA had joint line height and posterior offset restored more accurately than patients undergoing TKA using a conventional technique. Average change from pre-operative measurement in joint line height using raTKA was -0.38mm [95% CI: -0.79 to 0.03] vs 0.91 [0.14 to 1.68] with the conventional technique. Average absolute change in joint line height using raTKA was 1.96mm [1.74 to 2.18] vs 4.00mm [3.68 to 4.32] with the conventional technique. Average change in posterior offset using raTKA was 0.08mm [-0.40 to 0.56] vs 1.64mm [2.47 to 0.81] with the conventional technique. Average absolute change in posterior offset with raTKA was 2.19mm [1.92 to 2.46] vs 4.24mm [3.79 to 4.69] with the conventional technique. There was a significant difference when comparing absolute change in joint line height and posterior offset between groups (p<0.01). CONCLUSION: Robotic-assisted primary TKA restores the joint line height and posterior offset more accurately than conventional jig-based techniques.

[Market overview: Robotic-assisted arthroplasty : Current robotic systems, learning curve and cost analysis]. / Marktübersicht: Roboterassistierte Endoprothetik : Aktuelle Robotersysteme, Lernkurven und Kostenanalyse.

Robotic-assisted arthroplasty has been rapidly entering clinical routine in recent years. The leading endoprosthesis manufacturers have all meanwhile placed robotic systems on the market, which, however, differ significantly from one another technically. Current systems are currently classified according to the degree of autonomy (active vs. semi-active vs. passive) and the data/image source (image-based: CT vs. X­ray, imageless). Some systems already offer the possibility of robotic-assisted or navigated implantation of hip endoprostheses. In the following review article, the currently leading robotic systems will be presented and compared with regard to their characteristics. Furthermore, the analysis of the learning curves for the different systems, currently available cost analysis models and an outlook on future developments and challenges will be given.

Full-length standing radiographs can be used for determination of the Femoral neck-shaft angle but not acetabular coverage.

INTRODUCTION: The exact evaluation of hip morphology is essential for surgical planning. A wide range of morphometric measures of the acetabulum is deduced from conventional anterior-posterior (ap) pelvic radiographs. Full-length weight-bearing radiographs (FLWBR) also depict the acetabulum and are commonly used for osteotomy planning of the lower limb. This study aimed to determine whether FLWBR can be used to evaluate acetabular morphology. METHODS: Radiographs of patients receiving a hip workup that included a conventional ap pelvic X-ray and FLWBR were utilized for radiographic measurements. The following parameters were measured: extrusion index of the femoral head, anterior wall index, posterior wall index, lateral center edge angle (LCE), acetabular index, pubic arc angle (subpubic angle), and centrum-collum-diaphyseal angle (CCD). RESULTS: FLWBR depicted a significantly reduced anterior coverage (p = 0.049) and increased posterior coverage (p < 0.001), higher acetabular index (p = 0.015), and higher pubic-arc angle (p = 0.02) compared to conventional ap pelvic radiographs. There were no significant differences regarding the CCD angle (p = 0.28), extrusion index (p = 0.31), and LCE (p = 0.16). DISCUSSION: The CCD angle of the femur can be measured on conventional ap radiographs and full-length weight-bearing X-rays for lower limb deformity analysis. However, FLWBR will depict an anteverted acetabular morphology, rendering conventional ap radiographs necessary for planning pelvic osteotomies.

Sports activity after pelvic osteotomy for treatment of developmental dysplasia of the hip : A comparative study between the triple pelvic and periacetabular osteotomy techniques.

BACKGROUND: Symptomatic dysplasia of the hip represents an indication for a bony correction of the acetabulum. In the last decades several operative procedures were established. OBJECTIVE: The aim of the current study was to analyze whether the level of sports activity is higher in patients after periacetabular osteotomy (PAO) according to Ganz as a technique which preserves the posterior column compared to classical triple pelvic osteotomy (TPO) for treatment of developmental hip dysplasia. MATERIAL AND METHODS: The study group included 102 patients treated with the classical TPO with already published clinical results, who were compared to 34 patients treated with PAO between 2012 and 2016. The clinical outcome scores included the modified Harris Hip Score, the Hip Osteoarthritis Outcome Score, the University of California, Los Angeles activity score and the visual analog scale. RESULTS: After a mean follow-up of 4.4 years the clinical parameters improved significantly after PAO (p < 0.05). In comparison to the TPO group the clinical scores of the PAO group had inferior baseline values and a tendency to inferior follow-up results in the mHHS (p < 0.05) and HOOS (p > 0.05). After surgery, the PAO group showed a shift to medium and high impact sport activities. CONCLUSION: The shorter time of postoperative partial weight bearing after PAO due to the preservation of the posterior column seemed not to have a positive impact on the clinical results or the sports activity compared to the TPO treated patients.

[Update on 3D printing in the surgery of musculoskeletal tumors]. / Update 3D-Druck in der Chirurgie muskuloskeletaler Tumoren.

The importance of 3D printing applications in the surgery of musculoskeletal tumors has increased in recent years. Even prior to the era of 3D printing, computer-assisted techniques, such as navigation, have proved their utility. Due to the variable appearance of bone tumors, there is a need for individual solutions. The 3D printing can be used for the development of anatomical demonstration models, the construction of patient-specific instruments and custom-made implants. For these three applications, different regulatory hurdles exist. Especially for the resection of pelvic tumors, 3D printing technologies seem to provide advantages due to the complicated anatomy and the proximity to relevant neurovascular structures. With the introduction of titanium printing, construction of individualized implants that fit exactly into the defect became feasible.

Comparative Cost Analysis of Four Different Computer-Assisted Technologies to Implant a Total Knee Arthroplasty over Conventional Instrumentation.

Several computer-assisted technologies, such as navigation and robotics, have been introduced to Total Knee Arthroplasty (TKA) in order to increase surgical precision and reduce complications. However, these technologies are often criticized due to the increased costs and effort associated with them; however, comparative data are missing. The aim of the present study was to evaluate differences in intraoperative workflows and the related perioperative cost-profiles of four current computer-assisted technologies, used to implant a TKA, in order to gain a comparison to conventional instrumentation. For the cost analysis, additional preoperative imaging and instruments, increased operating room (OR) and planning-time, and expenditures for technical support of the equipment and disposals were calculated, in comparison to conventional TKA, for (1) standard computer-navigation, (2) patient specific instruments (PSI), (3) image-based robotic assistance, and (4) imageless robotic assistance. Workflows at four expert centers which use these technologies were reviewed by an independent observer. The total cost calculation was based on a 125 TKA per year unit in Switzerland. Computer-navigation resulted in 14 min (+23%) increased surgery time and, overall, USD 650 in additional costs. PSI technology saved 5 min (8%) OR time but it created USD 1520 in expenditures for imaging and disposals. The image-based robotic system was the most expensive technology; it created overall additional costs of USD 2600, which predominately resulted from technical support, disposals, the CT-Scan, and 14 min of increased OR time. The imageless robotic assistance resulted in the largest increase in OR-time, as it resulted in an additional 25 min (+42%) on average. Overall, additional costs of USD 1530 were calculated. Every one of the assistive technologies in this study increased the total cost of TKA when compared to a conventional technique, and the most important variables, related to cost, were technical support and additional disposables. The longer surgical times and additional surgical trays required for the techniques had a marginal effect on overall costs. This comparative cost analysis gives valuable information for future efforts to calculate the real costs of these technologies and the subsequent return on investment of each technique.

[Strategic approach in periprosthetic joint infections]. / Strategisches Vorgehen bei chronischen Infektionen von Endoprothesen.

With rising numbers of revisions of total arthroplasty procedures of the lower extremities, the annual number of cases of implant-associated infection are also increasing. The conventional two-stage replacement strategy often leads to increased morbidity and mortality of patients; however, in the literature a one-stage exchange procedure shows equally good results if the indications are strictly defined. In addition to the correct diagnostics, the patient history, the inserted implant, the state of health and when applicable the pathogens present play an important role. If, among other factors, the pathogen is uncomplicated combined with a good bone and soft tissue situation and without a large number of previous operations, a single stage replacement of the endoprosthesis may be a suitable option. Despite existing controversies in the literature, this treatment approach seems to demonstrate a reduced hospitalization, reduced costs and improved patient satisfaction with the same re-revision rate. This review article explains the strategic approach to chronic infections of endoprostheses of the lower extremities based on clinical examples and a review of the current literature.