Assessment of cryogenic pretreatment for simulating environmental weathering in the formation of surrogate micro- and nanoplastics from agricultural mulch film.

Microplastics (MPs) and nanoplastics (NPs) from mulch films and other plastic materials employed in vegetable and small fruit production pose a major threat to agricultural ecosystems. For conducting controlled studies on MPs' and NPs' (MNPs') ecotoxicity to soil organisms and plants and fate and transport in soil, surrogate MNPs are required that mimic MNPs that form in agricultural fields. We have developed a procedure to prepare MPs from plastic films or pellets using mechanical milling and sieving, and conversion of the resultant MPs into NPs through wet grinding, both steps of which mimic the degradation and fragmentation of plastics in nature. The major goal of this study was to determine if cryogenic exposure of two biodegradable mulch films effectively mimics the embrittlement caused by environmental weathering in terms of the dimensional, thermal, chemical, and biodegradability properties of the formed MNPs. We found differences in size, surface charge, thermal and chemical properties, and biodegradability in soil between MNPs prepared from cryogenically treated vs. environmentally weathered films, related to the photochemical reactions occurring in the environment that were not mimicked by cryogenic treatment, such as depolymerization and cross-link formation. We also investigated the size reduction process for NPs and found that the size distribution was bimodal, with populations centered at 50 nm and 150-300 nm, and as the size reduction process progressed, the former subpopulation's proportion increased. The biodegradability of MPs in soil was greater than for NPs, a counter-intuitive trend since greater surface area exposure for NPs would increase biodegradability. The result isassociated with differences in surface and chemical properties and to minor components that are readily leached out during the formation of NPs. In summary, the use of weathered plastics as feedstock would likely produce MNPs that are more realistic than cryogenically-treated unweathered films for use in experimental studies.

Mechanical formation of micro- and nano-plastic materials for environmental studies in agricultural ecosystems.

Release of microplastics (MPs) and nanoplastics (NPs) into agricultural fields is of great concern due to their reported ecotoxicity to organisms that provide beneficial service to the soil such as earthworms, and the potential ability of MPs and NPs to enter the food chain. Most fundamental studies of the fate and transport of plastic particulates in terrestrial environments employ idealized MP materials as models, such as monodisperse polystyrene spheres. In contrast, plastics that reside in agricultural soils consist of polydisperse fragments resulting from degraded films employed in agriculture. There exists a need for more representative materials in fundamental studies of the fate, transport, and ecotoxicity of MPs and NPs in soil ecosystems. The objective of this study was therefore to develop a procedure to produce MPs and NPs from agricultural plastics (a mulch film prepared biodegradable polymer polybutyrate adipate-co-terephthalate (PBAT) and low-density PE [LDPE]), and to characterize the resultant materials. Soaking of PBAT films under cryogenic conditions promoted embrittlement, similar to what occurs through environmental weathering. LDPE and cryogenically-treated PBAT underwent mechanical milling followed by sieve fractionation into MP fractions of 840 µm, 250 µm, 106 µm, and 45 µm. The 106 µm fraction was subjected to wet grinding to produce NPs of average particle size 366.0 nm and 389.4 nm for PBAT and LDPE, respectively. A two-parameter Weibull model described the MPs' particle size distributions, while NPs possessed bimodal distributions. Size reduction did not produce any changes in the chemical properties of the plastics, except for slight depolymerization and an increase of crystallinity resulting from cryogenic treatment. This study suggests that MPs form from cutting and high-impact mechanical degradation as would occur during the tillage into soil, and that NPs form from the MP fragments in regions of relative weakness that possess lower molecular weight polymers and crystallinity.

A history of One Health.

One Health is not a new concept. It can be demonstrated that its origins and development literally run the gamut from A to Z, that is to say, from Aristotle to Zoobiquity. Indeed, the consequences of the interaction that occurs between ecosystems, animals and people have shaped, and continue to shape, the course of human events and history. A reasoned and evidence-based assessment of the history of One Health must first be founded on an agreed definition of the term, but, given the many disciplines and sciences involved, finding such a definition is no easy task. Furthermore, there is an extensive and growing list of visionary individuals who have, over the centuries, attempted to promote awareness and advance the conceptto improve the management of the risks and consequences that arise at the interface between animal, human and ecosystem health. The One Health ideas of the 21st Century constitute a re-conceptualisation of health management in response to the accelerating environmental changes of the past 100 years, changes that are associated with the parallel exponential growth and concentration of the global human population. Consequently, the concept of One Health must recognise the constantly evolving relationship between animals and humans and the planet they share.

Statistical analysis of optimal culture conditions for Gluconacetobacter hansenii cellulose production.

AIM: The purpose of this study was to analyse the effects of different culture parameters on Gluconacetobacter hansenii (ATCC 10821) to determine which conditions provided optimum cellulose growth. METHODS AND RESULTS: Five culture factors were investigated: carbon source, addition of ethanol, inoculation ratio, pH and temperature. jmp Software (SAS, Cary, NC, USA) was used to design this experiment using a fractional factorial design. After 22 days of static culture, the cellulose produced by the bacteria was harvested, purified and dried to compare the cellulose yields. The results were analysed by fitting the data to a first-order model with two-factor interactions. CONCLUSIONS: The study confirmed that carbon source, addition of ethanol, and temperature were significant factors in the production of cellulose of this G. hansenii strain. While pH alone does not significantly affect average cellulose production, cellulose yields are affected by pH interaction with the carbon source. Culturing the bacteria on glucose at pH 6.5 produces more cellulose than at pH 5.5, while using mannitol at pH 5.5 produces more cellulose than at pH 6.5. The bacteria produced the most cellulose when cultured on mannitol, at pH 5.5, without ethanol, at 20 degrees C. Inoculation ratio was not found to be a significant factor or involved in any significant two-factor interaction. SIGNIFICANCE AND IMPACT OF THE STUDY: These findings give insight into the conditions necessary to maximize cellulose production from this G. hansenii strain. In addition, this work demonstrates how the fractional factorial design can be used to test a large number of factors using an abbreviated set of experiments. Fitting a statistical model determined the significant factors as well as the significant two-factor interactions.

Current status of regulating biotechnology-derived animals in Canada: animal health and food safety considerations.

Development of an effective regulatory system for genetically engineered animals and their products has been the subject of increasing discussion among researchers, industry and policy developers, as well as the public. Since transgenesis and cloning are relatively new scientific techniques, transgenic animals are 'novel' organisms for which there is limited information. The issues associated with the regulation of transgenic animals pertain to environmental impact, human food safety, animal health and welfare, trade and ethics. It is a challenge for the developers to prove the safety of the products of biotechnology-derived animals and also for regulators to regulate this increasingly powerful technology with limited background information. In principle, an effective regulatory sieve should permit safe products while forming a formidable barrier for those posing an unacceptable risk. Regulatory initiatives for biotechnology-derived animals and their products should be able to ensure high standards for human and animal health, a sound scientific basis for evaluation; transparency and public involvement, and maintenance of genetic diversity. This review proposes a regulatory regime that is based on scientific risk based assessment and approval of products or by-products of biotechnology-derived animals and its application in context to Canadian regulations.

Regulatory considerations for biotechnology-derived animals in Canada.

Regulatory initiatives relating to biotechnology-derived livestock have focused on animal health, environmental impact, and the general concept of the safety of the food and by-products derived from such animals. Existing regulatory frameworks have been stretched to accommodate these emerging concerns. Public concerns and the expectations of society mean that the regulatory infrastructure is subject to a high level of scrutiny and that regulations are expected to maintain a clear level of confidence, transparency and effectiveness. A sound regulatory regime should be 'neutral', neither 'facilitating' nor 'restricting' the approval of products or by-products derived from biotechnology-derived animals.

The organisation of federal Veterinary Services in Canada: the Canadian Food Inspection Agency.

The organisational design of a national Veterinary Service is critical to the overall quality and integrity of its animal health and veterinary public health infrastructure. It is well recognised that the diversity of political, economic and social situations which exist in and between countries dictates that no one model of organisational structure can be applied to all circumstances. In Canada, a re-organisation of the approach of the federal government to food inspection in 1997 resulted in the transfer of the veterinary administration to a newly created agency called the Canadian Food Inspection Agency (CFIA). The authors provide a short background on the impetus for the creation of the CFIA and an overview of its organisational structure and responsibilities in animal and veterinary public health and food safety. Also included are the logic models that were developed for the federal Veterinary Services as part of their quality and performance management framework. Integrating all federally mandated food inspection systems under the CFIA has had concrete benefits in clarifying roles and responsibilities, reducing overlap and duplication of programme functions, improving service delivery and facilitating federal-provincial collaboration. Moreover, the strength of the organisation lies in the ability of the Canadian Veterinary Services to adhere to the fundamental principles of quality which are recommended by the OIE (World organisation for animal health) for the evaluation of Veterinary Services. No single organisational structure can guarantee a highly effective or competent Veterinary Service. Common challenges exist that may or may not be addressed in whole or in part by the organisational structure. The challenges highlighted in this paper provide further thoughts on the management of shared jurisdiction, meeting public health objectives, balancing science and political accountability, and defining the role and jurisdiction of veterinarians.

Synthesis and biological activity of analogues of the antidiabetic/antiobesity agent 3-guanidinopropionic acid: discovery of a novel aminoguanidinoacetic acid antidiabetic agent.

3-Guanidinopropionic acid (1, PNU-10483) has been demonstrated to both improve insulin sensitivity and to promote weight loss selectively from adipose tissue in animal models of non-insulin-dependent diabetes mellitus (NIDDM). However, 1 has also been shown to be a substrate for both the creatine transporter and creatine kinase, leading to marked accumulation in muscle tissue as the corresponding N-phosphate 4. In an effort to identify novel entities that maintain antidiabetic potency without susceptibility to creatine-like metabolism, an analogue program was undertaken to explore the effects of various structural modifications, including homologation, simple substitution, single atom mutations, and bioisosteric replacements for the guanidine and carboxylic acid. Overall, the scope of activity encompassed by the set of new analogues proved to be exceedingly narrow. Notable exceptions demonstrating equivalent or improved antidiabetic activity included the alpha-amino derivative 29, aminopyridine 47, isothiourea 67, and aminoguanidine 69. On the basis of its superior therapeutic ratio, aminoguanidine 69 was selected for preclinical development and became the foundation for a second phase of analogue work. Furthermore, in vitro studies demonstrated that 69 is markedly less susceptible to phosphorylation by creatine kinase than the lead 1, suggesting that it should have less potential for accumulation in muscle tissue than 1.

Synthesis and biological activity of aminoguanidine and diaminoguanidine analogues of the antidiabetic/antiobesity agent 3-guanidinopropionic acid.

3-Guanidinopropionic acid (1) has been demonstrated both to improve insulin sensitivity and to promote weight loss selectively from adipose tissue in animal models of non-insulin-dependent diabetes mellitus (NIDDM). However, 1 has also been shown to be a substrate for both the creatine transporter and creatine kinase, leading to marked accumulation in muscle tissue as the corresponding N-phosphate. The corresponding aminoguanidine analogue 2 was recently discovered to retain the antidiabetic activity of 1 while being markedly less susceptible to creatine-like metabolism, suggesting that it should have less potential to accumulate in muscle. Further structural modification of 2 was undertaken to investigate whether the antidiabetic potency could be augmented while maintaining resistance to creatine-like metabolism. Modifications such as alpha-alkylation, homologation, and bioisosteric replacement of the aminoguanidine all were detrimental to antidiabetic activity. However, the simple regioisomeric aminoguanidinoacetic acid 9 and diaminoguanidinoacetic acid analogue 7 were found to be equipotent to 2, leading eventually to the discovery of the significantly more potent diaminoguanidinoacetic acid regioisomers 52 and 53. Further attempts to modify the more active template represented by 52 led only to reductions in antidiabetic activity. Each of the new active analogues displayed the same resistance to creatine-like metabolism as 2. Further testing of 7, 9, and 53 in obese diabetic ob/ob mice confirmed that weight loss is induced selectively from adipose tissue, similar to the lead 1. Administration of 53 to insulin-resistant rhesus monkeys led to reductions in both fasting and post-prandial plasma glucose levels with concomitant reductions in plasma insulin levels, suggesting that the compound improved the action of endogenous insulin. Compounds 7 and 53 were selected for further preclinical development.

The mechanism of cellulase action on cotton fibers: evidence from atomic force microscopy.

Two cellulases from Trichoderma reesei--an exoglucanase, CBH I, and an endoglucanase, EG II--alone and in combination were incubated with cotton fibers. The effects of the cellulases on the surfaces of the cotton fibers were examined by atomic force microscopy. At high magnification, the physical effects on the fibers caused by the two types of enzymes were considerably different. Treatment with CBH I resulted in the appearance of distinct pathways or tracks along the length of the macrofibril. Treatment with EG II appeared to cause peeling and smoothing of the fiber surface. In combination, their effect was observed to be greatest when both enzymes were present simultaneously. When fibers smoothed by treatment with EG II were treated subsequently with CBH I, further evidence of path way formation caused by the action of CBH I along the fibers was observed. Incubation with a cellulase from Thermotoga maritima that lacks a cellulose binding domain had no effect on the surface of cotton fibers. These images provide the first physical evidence of differences in the effect of cellulase components action on the surface of cotton fibers and provide evidence for the movement or tracking of CBH I along the fibers. The first AFM image of CBH I molecules are presented.

The prospect for international regulatory interventions in embryo transfer and reproductive technologies in the next century.

Historically, international regulatory interventions in the area of animal reproductive technologies have focused on the need for mitigation against the dissemination of diseases with the movement of genetics and germplasm across international borders. The continued globalization of agriculture under the Sanitary/Phytosanitary (SPS) Agreement of the World Trade Organization (WTO) ensures that disease considerations arising from third and fourth generation reproductive technologies such as in vitro fertilized embryos, transgenics and xenotransplantation will continue to give rise to animal health regulatory measures. Furthermore, in the aftermath of the raising of the public consciousness and the ensuing consumer confidence crisis concerning animal husbandry and livestock production practices following the Bovine Spongiform Encephalopathy outbreak, evolving societal values are expected to expand regulatory considerations to address veterinary public health and ethical concerns. Consequently, it is expected that the role of the International Embryo Transfer Society in fostering meaningful dialogue and profiling of the research necessary to provide for appropriate science based regulation development will increase in importance.

Comparison of the properties of native and pentaammineruthenium(III)-modified xylanase.

Two xylanases, xynA of Bacillus pumilus and xyn II of Trichoderma reesei, were purified and then modified by the attachment of pentaammineruthenium, thereby resulting in the generation of a xylanase with veratryl alcohol oxidase activity. Hydrolytic activity of T. reesei xyn II on soluble xylans was unchanged by modification with pentaammineruthenium; however, modification of B. pumilus xynA greatly reduced xylan hydrolysis unless the active site of the xylanase was protected with xylose during the modification. The presence of histidine, cysteine, or reduced glutathione during xylan hydrolysis greatly increased the xylanase activity of the pentaammineruthenium-modified B. pumilus xylanase. Glycine, glutamic acid, methionine, or oxidized glutathione had no effect on xylanase activity.

Inhibition of cellobiohydrolase I from Trichoderma reesei by palladium.

Cellulase from Trichoderma reesei is a multienzyme mixture that hydrolyzes cellulose to glucose. Two enzymes in this mixture, cellobiohydrolase (CBH) and endoglucanase (EG), possess a common structure comprising a distinct cellulose-binding domain (CBD) and catalytic domain. Inhibition of the catalytic domain of cellulases without affecting their CBD function might be useful for structure/function studies of these enzymes. Complexes of the platinum group metals were tested for their ability to inhibit the major cellulase enzyme from T. reesei, cellobiohydrolase I (CBH I). Only palladium complexes inhibited CBH I, inhibition being dependent upon the molar ratio of palladium to CBH I with 1 microM CBH I retaining only 10% of its activity in the presence of 100 microM ammonium hexachloropalladate(IV) and after the incorporation of 28 mol Pd/mol CBH I. Inhibition was irreversible and could be completely prevented by including histidine, cysteine, and cystine in the assay mixture. Although the primary mechanism of inhibition of CBH I by palladium remains to be elucidated, it could involve the binding of palladium to sulfur or cystine residues resulting in their degradation. This is based on the findings that (i) palladium-inhibited CBH I was less thermally stable than native CBH I; (ii) CBH I, chemically modified by the attachment of pentaammine ruthenium(III) to the imidazole-N of either H206 or H228, showed greater sensitivity to inhibition by palladium compared to native CBH I; and (iii) ammonium hexachloropalladate cleaved 5,5'-dithiobis(2-nitrobenzoic acid)--Ellman's reagent. Binding of CBH I to crystalline cotton linters was not affected by palladium.

Distribution of Aedes albopictus in Georgia, USA.

A statewide survey was conducted for Aedes albopictus in Georgia during the summers of 1991-94. All 159 counties in Georgia were determined to be infested. Aedes albopictus was widely distributed throughout all ecological regions in the survey area.

Palladium--a new inhibitor of cellulase activities.

Palladium complexes have been shown to strongly inhibit cellobiohydrolase I (CBH I) and endoglucanase II (EG II), two cellulases produced by Trichoderma reesei. Also inhibited were total cellulase (Avicelase) and beta-glucosidase (cellobiase) activities. The catalytic domain of CBH II, the second most abundant component of this cellulase, appeared less susceptible to inhibition by palladium. The inhibition was irreversible and could be prevented if histidine, cysteine or cystine was added to the enzyme reaction mixture simultaneously with the inhibitor. The binding of CBH I to microcrystalline cellulose (Avicel) was unaffected by palladium.

Veratryl alcohol oxidase activity of a chemically modified cellulase protein.

A cellulase, cellobiohydrolase I (CBH I) from Trichoderma reesei was chemically modified by covalent attachment of pentaammine ruthenium (III) without loss in hydrolytic activity. Data suggest that such a modification endowed CBH I with oxidoreductase activity. The modified enzyme was able to carry out hydrogen peroxide-dependent oxidation of veratryl alcohol, a substrate for lignin peroxidase, at a rate of 0.148 mumol substrate oxidized min-1 mumol-1 enzyme. The effects of pH, temperature, and substrate concentration on the oxidation reaction were examined. The optimal temperature was determined to be 45 degrees C, and the optimal pH was 4.3. The Km and Vmax for veratryl alcohol were determined to be 3.519 mM and 52.27 microM min-1, respectively. Tartrate at concentrations as low as 0.10 mM was found to inhibit the reaction.

Papain digestion of crude Trichoderma reesei cellulase: purification and properties of cellobiohydrolase I and II core proteins.

The major cellulase components produced by Trichoderma reesei are composed of distinct catalytic and cellulose-binding domains. A simple two-step procedure is described for the purification of the catalytic domains, also termed core proteins (cp), of the major components, cellobiohydrolase (CBH) I and II. The novel aspect of this procedure is that native CBH I and II do not have to be purified initially. Papain digestion of a commercial T. reesei cellulase preparation followed by gel filtration on a Superdex 75 column resulted in the separation of fractions containing CBH I cp and CBH II cp; chromatofocusing purified the latter to homogeneity. N-terminal protein sequencing of CBH II cp provided good evidence for its identity. A comparison of the catalytic activity and cellulose-binding ability of these cp was made. A major difference between them was that CBH II cp bound to microcrystalline cellulose, unlike CBH I cp. CBH I cp readily hydrolysed the bond between the aglycone and cellobiose in p-nitrophenyl cellobioside unlike the CBH II cp preparation. Neither CBH I cp nor CBH II cp had activity toward carboxymethylcellulose, but both were able to hydrolyse barley beta-glucan. It was also shown that incubation of cellulose fibres with native CBH I, CBH I cp or CBH II cp resulted in a smoothing of the fibre surface.

Attachments of pentaammineruthenium(III) to Trichoderma reesei cellobiohydrolase I increases its catalytic activity.

Pentaammineurthenium(III) was covalently attached to cellobiohydrolase I (CBH I, EC 3.2.1.91), the major component of Trichoderma reesei cellulase, resulting in 0.7 mol ruthenium/mol CBH I and an electrode potential of +95 mV. Fractionation of modified CBH I by chromatofocusing resulted in the separation of fractions with a 1.4- to 3.2-fold increase in specific activity toward p-nitrophenylcellobioside, depending on the assay conditions, over that of native enzyme. The extent of the hydrolysis of insoluble cellulosic substrates (Avicel and newsprint) to glucose by modified CBH I was also greater than that observed by the native enzyme.

Comparison of Ellman's reagent with N-(1-pyrenyl)maleimide for the determination of free sulfhydryl groups in reduced cellobiohydrolase I from Trichoderma reesei.

The enzyme cellobiohydrolase I (CBH I) from Trichoderma reesei was treated with 5 mM dithiothreitol at different pH values in order to reduce some or all of its 12 disulfide bridges. A discrepancy was found in the number of free sulfhydryl (SH) groups generated upon the reduction of CBH I when they were measured using N-(1-pyrenyl)maleimide (PM) or Ellman's reagent, 5,5'-dithiobis(2-nitrobenzoic acid). For example, the number of SH mol generated/mol CBH I at pH 8.5 was determined to be 16 and < 1 when measured using PM or Ellman's reagent, respectively. The low value obtained with Ellman's reagent may be due to the electrostatic repulsion between the carboxylic acid groups in CBH I and those in Ellman's reagent. The fluorimetric assay used for determining SH molecules in reduced CBH I, based on their reaction with PM, is described.

Modulation of T lymphocyte function by the angiogenesis inhibitor AGM-1470.

The angiogenesis inhibitor AGM-1470 has recently been reported to inhibit collagen-induced arthritis in rats. To determine if the anti-arthritic effects of AGM-1470 might be due to T cell inhibition, we have studied its effects on T cell responses in vitro. Responses of human cells to tetanus toxoid (TT), and those of murine splenocytes to staphylococcal enterotoxin (SE), mitogens or a mls difference were inhibited by AGM-1470. Responses of human cells to SE, OKT3 and PHA were all partially inhibited on day 2 (d2) but not d3, and in fact were augmented on d6-8. The amount of IL-2 in SEA cultures was augmented on d4 and d5. There were no differences in the expression of CD3, CD4, CD8, CD25, CD45RA, CD45RO, LFA-1, VLA-4 or VLA-6 in inhibited cultures, except for slight decreases in CD25 and CD45RO in TT cultures. These results indicated that the angiogenesis inhibitor AGM-1470 also modulates human and murine lymphocyte function.