Evaluation of the removal of 2-Hydroxyisocaproic acid from the root canal and its effect on the bond strength of MTA.

This study aimed to evaluate the removal of 2-hydroxyisocaproic acid (HICA) from the root canal system and its effect on the bond strength of the mineral trioxide aggregate (MTA). 126 single-rooted teeth were divided into 3 experimental groups (n = 36) that were treated with double antibiotic paste (DAP), HICA and calcium hydroxide (CH) and one control group (n = 18). In the first part, 18 teeth from each experimental group (n = 54) were examined to remove HICA from the root canal. In the second part, 72 teeth (3 experimental groups (n = 54) and one control group (n = 18)) were used for the evaluation of the push-out bond strength of MTA. There was no statistically significant difference between HICA, DAP and CH residues (p > 0.05). HICA group showed significantly less push-out bond strength (p < 0.05). DAP, HICA and CH could not be removed entirely from the root canal. HICA significantly reduced the bond strength of the MTA.

Patterns of Post-Endodontic Restoration: A Nationwide Survey of Dentists in Turkey.

Developments in materials and techniques, geographical locations, age, specialty, and affiliations of dental practitioners affect the preference of post-endodontic restoration. Thus, this survey aimed to evaluate the trends of dentists in Turkey in terms of post-endodontic restorations. An anonymous survey containing 10 questions regarding demographics, post-endodontic restoration patterns, and factors affecting restoration selection was electronically delivered to the dentists registered in the database of the Turkish Dental Association. The data were analyzed using by a chi-square test and ordinal logistic regression analysis. A total of 1093 surveys from 20,564 participants were collected with a response rate of 5.3%. Half of the participants (52%) preferred composite resins for post-endodontic restorations. Usage of posts was less prevalent amongst prosthodontists and dentists with clinical experience of more than 20 years compared to endodontists (p < 0.001) and dentists with clinical experience of less than 5 years (p = 0.004). More than half of the participants (56%) utilized fiber posts. Composite resins and fiber posts were the most common preferences in post-endodontic restoration. Endodontists had a higher tendency to use posts than prosthodontists and general dental practitioners.

The effect of intracanal medication variations on microhardness of simulated immature root dentin.

The effect of different medicaments and irrigation solutions on root dentin microhardness (MH) was evaluated depending on time. After initial measurements, MH of 60 maxillary incisors (n = 15 per group) was measured after 3 steps: irrigation with 2.5% sodium hypochlorite, exposure to medicaments [triple antibiotic (TAP) or calcium hydroxide (CH) pastes, 1 week or 1 month)] and final irrigation [20 mL of 17% EDTA or 20 mL 1% phytic acid (PA)]. The percentage of MH reduction was calculated. Data were analysed statistically at P < 0.05. Treatments caused a significant decrease in MH values compared to baseline and pre-measurements (P < 0.05). TAP significantly reduced the MH values of the samples over time (P < 0.05). Removal of TAP after 1 month with PA resulted in a significant reduction in MH compared to removing TAP after 1 week and CH removing after 1 month (P < 0.05). Considering the chemical preparation steps, the most hazardous effect on MH was observed after the first irrigation.

Tooth Discoloration Induced by Different Calcium Silicate-Based Cements: A Two-Year Spectrophotometric and Photographic Evaluation in Vitro.

OBJECTIVE: Calcium silicate-based cements (CSCs) may lead to coronal staining in young permanent teeth over the time. The purpose of this study was to evaluate and compare the long-term tooth discoloration induced by different CSCs. STUDY DESIGN: Ninety freshly-extracted human molars were assigned randomly into 6 groups (n=15/group) according to the CSC used as a pulpotomy material: ProRoot MTA, MTA Angelus, NeoMTA, EndoSequence Putty, Biodentine and Negative control (No cement). The color was assessed at baseline, and thereafter at 3, 6, 12 and 24 months by using both a spectrophotometer and digital images taken with and without a cross-polarizing filter. The time-dependent changes in color (ΔE) were compared within and among groups using Analysis of Variance. RESULTS: Angelus MTA and ProRooT MTA showed severe coronal discoloration (p>0.05) starting at 3 months. ΔE values of NeoMTA, EndoSequence Bioceramic Putty and Biodentine were below the perceptibility threshold, with Biodentine showing greater ΔE values than NeoMTA and EndoSequence Putty in the absence of statistical significance (p>0.05). CONCLUSIONS: Discoloration elicited by CSCs may develop soon after placement, and continue to increase for up to two years. Angelus MTA and ProRooT MTA cannot be recommended for vital pulp therapies in the esthetic zone of young individuals.

Sealer penetration: effect of separated file's cross-section, taper and motion characteristics.

OBJECTIVES: The separated root canal instruments may affect the quality of root canal filling, hence the success of endodontic treatment. The aim of this study was to evaluate the effects of separated file fragments of nickel-titanium rotary systems with different cross-section, taper and motion characteristics on the apical sealer penetration in oval-shaped root canals via confocal laser scanning microscope (CLSM). MATERIALS AND METHODS: Distal roots of 60 mandibular molars with oval-shaped root canals were randomly divided into 4 groups as follows: group 1, FlexMaster Nickel Titanium Rotary File System (NTRFS) (separated instrument: 30/.06); group 2, ProTaper Next NTRFS (X3); group 3, ProTaper Universal NTRFS (F3); group 4, Revo-S NTRFS (AS30/.06). Root canals were filled with gutta-percha and AH plus labelled with 0.1% rhodamine B using a warm vertical compaction technique. Each specimen was horizontally sectioned at 1st, 3rd and 5th mm from apical foramen. Amount of maximum and average penetration depths, penetration percentage and sealer penetrated area were measured and analysed with one-way repeated measures of ANOVA and the Bonferroni post hoc tests. p < 0.05 was considered significant. RESULTS: The penetration depth, percentage and penetrated area of the sealer increased from apical to coronal in all systems. The maximum and average penetration depths and penetration areas were higher in FlexMaster and Revo-S groups at the 3rd mm (p < 0.05). At the 5th mm, the Revo-S group had a higher penetration percentage, when compared with ProTaper Next and ProTaper Universal groups (p < 0.05). CONCLUSIONS: In the 1st mm, separated fragments of any system did not allow the penetration of the sealer, while it was observed that the files with constant taper showed more positive results in terms of sealer penetration at apical 3rd and 5th mm. CLINICAL RELEVANCE: In the presence of a separated file, the taper of the file might significantly affect the amount of penetrated sealer into the dentinal tubules as compared with the cross-section and motion characteristics of the file.

Dentinal Tubule Penetration and Retreatability of a Calcium Silicate-based Sealer Tested in Bulk or with Different Main Core Material.

INTRODUCTION: The aim of this study was 2-fold: to evaluate the penetration of a tricalcium silicate-based endodontic sealer (EndoSequence BC Sealer; Brasseler USA, Savannah, GA) into dentinal tubules without a core material (sealer) or with .02 or .04 tapered bioceramic gutta-percha points and to compare the time required to remove the root fillings . METHODS: Roots of extracted human mandibular incisors (N = 60) were prepared with 0.04 taper nickel-titanium rotary files to #35 and randomly assigned into 3 groups (n = 10/group) according to the obturation method used: 1. obturating with sealer only, 2. sealer + .02 point, and 3. sealer + .04 point. The sealer was labeled with rhodamine B for analyzing dentinal tubule penetration under a confocal laser scanning microscope. The remaining specimens (n = 30) were used to measure the time for removal of the root canal fillings with retreatment files. The data were analyzed using 1-way analysis of variance and post hoc Games-Howell tests for dentinal tubule penetration and the Kruskal-Wallis test for retreatment time. RESULTS: Significantly greater sealer penetration and sealer-penetrated area was achieved when the sealer was used with a .04 gutta point (P < .05), whereas there was no difference between the sealer and .02 gutta point groups (P > .05). All test groups showed a similar depth of sealer penetration (P > .05). Groups with the gutta-percha points required a similar time to remove root filling (P > .05), whereas the working length could not be achieved in the sealer group. CONCLUSIONS: The use of a matched-taper bioceramic gutta-percha point enhanced the dentinal tubule penetration of the tested tricalcium silicate-based sealer. The use of a core material in conjunction with sealer facilitates removal of the root filling to the working length.

Fracture resistance of simulated immature teeth after internal bleaching procedures.

The aim of this study was to evaluate the fracture resistance of simulated immature teeth after internal bleaching. The teeth were assigned as follows (n = 12/group); Group-1: The pulp chamber was filled with ProRootMTA and bleached intracoronally with sodium perborate mixed with 37% carbamide peroxide gel; Group-2: The pulp chamber was filled with ProRootMTA without bleaching; Group-3: The pulp chamber was filled with Biodentine and bleached intracoronally as Group-1; Group-4: The pulp chamber was filled with Biodentine without bleaching; and Group-5: Teeth received no intervention (control). The specimens were loaded vertically until root fracture occurred. The data were analysed with Kruskal-Wallis and Dunn tests. There was no significant difference between the fracture resistances of the experimental groups (P > 0.05). However, all experimental groups had significantly lower fracture resistance than the control group (P < 0.05). Neither the tested calcium silicate cements nor the bleaching procedures had a significant impact on fracture resistance values.

Effect of Laser-Activated Irrigation on the Push-Out Bond Strength of ProRoot Mineral Trioxide Aggregate and Biodentine in Furcal Perforations.

OBJECTIVE: The objective of the present study was to assess the effect of erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser-activated irrigation (LAI) of NaOCl on the push-out bond strength of furcal perforations repaired with ProRoot mineral trioxide aggregate (MTA) and Biodentine. BACKGROUND DATA: Several studies investigated the adhesion of calcium silicate-based cements after exposure to endodontic irrigants, while effect of LAI on bond strength remains to be elucidated. MATERIALS AND METHODS: Bur-cut furcal perforations with standard dimensions were created in 100 extracted human mandibular molars. Teeth were randomly distributed into two groups (n = 50/group) according to the repair material applied: (1) ProRoot MTA or (2) Biodentine. The specimens were further assigned into five subgroups according to the irrigation regimens used over the set materials: (a) distilled water with needle irrigation; (b) 5.25% NaOCl with needle irrigation; (c) distilled water with LAI; (d) 5.25% NaOCl with LAI; and (e) no irrigation (control). Bond strengths of the test materials were assessed by using push-out bond strength test. RESULTS: Biodentine showed significantly higher dislocation resistance than ProRoot MTA (p < 0.05). Laser activation of 5.25% NaOCl and distilled water did not significantly affect the push-out bond strength results (p > 0.05). CONCLUSIONS: Biodentine showed higher dislocation resistance than ProRoot MTA as a perforation repair material. Er,Cr:YSGG laser activation of irrigation aqueous solutions had no adverse effect on push-out bond strength of Biodentine and ProRoot MTA.

Effect of Laser-Activated Irrigation with Ethylene Diaminetetraacetic Acid and Phytic Acid on the Removal of Calcium Hydroxide and Triple Antibiotic Paste from Root Dentin.

OBJECTIVE: This study assessed the efficacy of erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser-activated irrigation (LAI) of ethylene diaminetetraacetic acid (EDTA) and phytic acid on the removal of calcium hydroxide (CH) and triple antibiotic paste (TAP) from root canals. BACKGROUND DATA: Although some studies investigated the efficacy of LAI of EDTA irrigation, no study has been conducted to investigate the efficacy of LAI of phytic acid in the removal of CH and TAP from root dentin. MATERIALS AND METHODS: Root canals of extracted maxillary incisors (n = 80) were instrumented using rotary files and thereafter were split longitudinally. Following preparation of a standardized groove in the apical region of one root half, the roots were randomly divided into two groups according to the intracanal medicaments placed into the grooves: (1) CH and (2) TAP. The roots were reassembled, and the specimens were further assigned into four groups (n = 10/group) defined by the final irrigation solution (EDTA and phytic acid) and irrigation technique (needle irrigation and LAI) used for removal of the medicaments. The data were analyzed statistically using Kruskal-Wallis and Mann-Whitney U tests. RESULTS: For both EDTA and phytic acid, LAI was more efficient than needle irrigation in removing both CH and TAP (p < 0.05), but none of the tested techniques completely removed CH. Irrespective of the tested irrigation solutions and techniques, significantly less TAP remained in canals (p = 0.0001), with TAP being completely removed by LAI. Irrigation with phytic acid showed better removal efficacy than EDTA in the absence of statistical significance. CONCLUSIONS: Er,Cr:YSGG LAI of EDTA and phytic acid completely removed TAP and effectively reduced CH on root dentin.

Calcium hydroxide dressing residues after different removal techniques affect the accuracy of Root-ZX apex locator.

OBJECTIVES: This study compared the ability of several techniques to remove calcium hydroxide (CH) from the root canal and determined the influence of CH residues on the accuracy of the electronic apex locator. MATERIALS AND METHODS: Root canals of 90 human maxillary lateral incisors with confirmed true working length (TWL) were prepared and filled with CH. The teeth were randomly assigned to one of the experimental groups according to the CH removal technique (n = 14): 0.9% saline; 0.9% saline + master apical file (MAF); 17% ethylenediamine tetraacetic acid (EDTA); 17% EDTA + MAF; 5.25% sodium hypochlorite (NaOCl); 5.25% NaOCl + MAF. Six teeth were used as negative control. After CH removal, the electronic working length was measured using Root-ZX (Morita Corp.) and compared with TWL to evaluate Root-ZX accuracy. All specimens were sectioned longitudinally, and the area of remaining CH (CH) and total canal area were measured using imaging software. RESULTS: The EDTA + MAF and NaOCl + MAF groups showed better CH removal than other groups (p < 0.05). Root-ZX reliability to prevent overestimated working length to be > 85% within a tolerance of ± 1.0 mm (p < 0.05). There was strong negative correlation between amount of CH residues and EAL accuracy (r = -0.800 for ± 0.5 mm; r = -0.940 for ± 1.0 mm). CONCLUSIONS: The mechanical instrumentation improves the CH removal of irrigation solutions although none of the techniques removed the dressing completely. Residues of CH medication in root canals affected the accuracy of Root-ZX adversely.

Dentin moisture conditions affect the adhesion of root canal sealers.

INTRODUCTION: The purpose of this study was to evaluate the effects of intraradicular moisture conditions on the push-out bond strength of root canal sealers. METHODS: Eighty root canals were prepared using rotary instruments and, thereafter, were assigned to 4 groups with respect to the moisture condition tested: (1) ethanol (dry): excess distilled water was removed with paper points followed by dehydration with 95% ethanol, (2) paper points: the canals were blot dried with paper points with the last one appearing dry, (3) moist: the canals were dried with low vacuum by using a Luer adapter for 5 seconds followed by 1 paper point for 1 second, and (4) wet: the canals remained totally flooded. The roots were further divided into 4 subgroups according to the sealer used: (1) AH Plus (Dentsply-Tulsa Dental, Tulsa, OK), (2) iRoot SP (Innovative BioCeramix Inc, Vancouver, Canada), (3) MTA Fillapex (Angelus Indústria de Produtos Odontológicos S/A, Londrina, Brasil), and (4) Epiphany (Pentron Clinical Technologies, Wallingford, CT). Five 1-mm-thick slices were obtained from each root sample (n = 25 slices/group). Bond strengths of the test materials to root canal dentin were measured using a push-out test setup at a cross-head speed of 1 mm/min. The data were analyzed statistically by two-way analysis of variance and Tukey tests at P = .05. RESULTS: Irrespective of the moisture conditions, iRoot SP displayed the highest bond strength to root dentin. Statistical ranking of bond strength values was as follows: iRoot SP > AH Plus > Epiphany ≥ MTA Fillapex. The sealers displayed their highest and lowest bond strengths under moist (3) and wet (4) conditions, respectively. CONCLUSIONS: The degree of residual moisture significantly affects the adhesion of root canal sealers to radicular dentin. For the tested sealers, it may be advantageous to leave canals slightly moist before filling.