Evaluation of remediation of coal mining wastewater by chitosan microspheres using biomarkers.

Acidic mine waters have a marked influence on the surrounding environment and pose a serious threat through long-term environmental degradation. Therefore, it is important to improve and monitor water quality with the aim of decreasing the hazard presented by this effluent emission. The aim of this work was to evaluate the remediation of mining wastewater effluents by chitosan microspheres using biomarkers of exposure and effect. DNA damage (Comet assay) and several biomarkers of oxidative stress, such as lipoperoxidation levels (TBARS), superoxide dismutase (SOD), catalase (CAT), and glutathione S-transferase (GST) activities, and contents of reduced glutathione (GSH), were measured in blood and liver of tilapia (Oreochromis niloticus) exposed for 7, 15, and 30 days to dechlorinated tap water, 10% coal mining wastewater (CMW), and coal mining wastewater treated with chitosan microspheres (RCM). The results indicate that hepatic TBARS levels were significantly higher in fish exposed to CMW after 7, 15, and 30 days (100%, 86%, and 63%, respectively), and after remediation there was no significant difference in relation to the control group. Hepatic GSH concentrations were lower than control values for CMW after 7 and 15 days of exposure (34% decrease at both times), and this concentration was normalized by treatment with chitosan. SOD showed increased activity in liver after 15 and 30 days of exposure, 30% and 36%, respectively, and in fish exposed to RCM there was no change in this activity compared with the control group. Increased CAT activity in liver was observed during all experimental periods in fish exposed to CMW (46%, 50%, and 56% at 7, 15, and 30 days, respectively) compared with the control or treated-water groups. The highest increase in hepatic GST activity (106%) was observed only in fish exposed to CMW for 30 days. There was an increase in DNA damage in liver (50% at 7 and 15 days) and blood (79%, 77%, and 48% at 7, 15, and 30 days, respectively) after exposure to CMW. In contrast, the fish exposed to wastewater treated with chitosan microspheres exhibited DNA fragmentation indexes similar to the control group. The results obtained indicate the use of oxidative stress biomarkers as useful tools for the toxicity evaluation of coal mining effluents and also suggest that chitosan microspheres may be used as an alternative approach for remediation of coal mining wastewaters.

Lipid lowering activity of hydrosoluble chitosan and association with Aloe vera L. and Brassica olearaceae L.

The lipid lowering activity of chitosan associated with Aloe vera L. or hydrosoluble chitosan with Brassica olearaceae L. has been studied in rats. In this study, rats were submitted to different treatments with hydrosoluble chitosan alone (4% diet), hydrosoluble chitosan associated with Aloe vera L. or hydrosoluble chitosan with Brassica olearaceae L. (1:4, 4% diet) for 35 days, to identify the formula with the highest hypolipaemic potential. The results showed that all treatments reduced blood lipid levels but that hydrosoluble chitosan associated with Brassica olearaceae L. proved most efficient, because it decreased the levels of total cholesterol, LDL-cholesterol, VLDL-cholesterol and triglycerides in blood serum. The overall results suggest that the hydrosoluble chitosan/Brassica olearaceae L. association is a therapeutic alternative for hyperlipidaemia, and in this way may contribute to the prevention of atherogenic processes.

Chitosan microspheres containing the natural urucum pigment.

An increasing trend in the food and pharmaceutical industries is toward replacing synthetic additives with natural products. However, in this regard, difficulties may be encountered due to the instability of such compounds. Encapsulation has become an important process to protect natural pigments. This paper reports on the encapsulation of the natural urucum pigment with chitosan using different techniques and its release under different pH conditions. The material loaded with pigment was evaluated by infrared spectroscopy, scanning electron microscopy and thermal analysis. Chitosan was found to be an effective encapsulating agent for urucum pigment. No investigations have previously been reported on the relation of chitosan to the stability of encapsulated natural pigments.

Use of chitosan microspheres as remedial material for acidity and iron (III) contents of coal mining wastewaters.

Chitosan microspheres are highly effective in neutralizing the acidity of wastewaters from coal mining. The saturation capacity for the formation of a superficial monolayer on the adsorbent was interpreted using Langmuir isotherm and considering the amino groups as the adsorption sites for hydronium ions. The saturation capacity of the surface of the static system was 0.428 mol kg(-1), higher than that of the dynamic one. This value corresponds to the neutralization of 135 liters of wastewater per kilogram of microspheres. One gram of chitosan microspheres was capable of increasing wastewater pH from 2.5 to 4.0 and removing approximately 100% of its iron (III) contents.

Remediation of coal mining wastewaters using chitosan microspheres.

This study aimed to evaluate the potential use of chitosan and chitosan/poly(vinylalcohol) microspheres incorporating with tetrasulphonated copper (II) phthalocyanine (CTS/PVA/TCP) in the remediation of coal mining wastewaters. The process was monitored by toxicity tests both before and after adsorption treatments with chitosan and microspheres. Physicochemical parameters, including pH and trace-metal concentration, as well as bioindicators of water pollution were used to that end. Wastewater samples colleted from drainage of underground coal mines, decantation pools, and contaminated rivers were scrutinized. Acute toxicity tests were performed using the Brine Shrimp Test (BST) in order to evaluate the remediation efficiency of different treatments. The results showed that the pH of treated wastewater samples were improved to values close to neutrality. Chitosan treatments were also effective in removing trace-metals. Pre-treatment with chitosan followed by microsphere treatment (CTS/PVA/TCP) was more effective in decreasing toxicity than the treatment using only chitosan. This was probably due to the elimination of pollutants other than trace-metals. Thus, the use of chitosan and microspheres is an adequate alternative towards remediation of water pollution from coal mining.

Synthesis of calcium-phosphate and chitosan bioceramics for bone regeneration.

Bioceramic composites were obtained from chitosan and hydroxyapatite pastes synthesized at physiological temperature according to two different syntheses approaches. Usual analytical techniques (X-ray diffraction analysis, Fourier transformed infrared spectroscopy, Thermo gravimetric analysis, Scanning electron microscopy, X-ray dispersive energy analysis and Porosimetry) were employed to characterize the resulting material. The aim of this investigation was to study the bioceramic properties of the pastes with non-decaying behavior from chitosan-hydroxyapatite composites. Chitosan, which also forms a water-insoluble gel in the presence of calcium ions, and has been reported to have pharmacologically beneficial effects on osteoconductivity, was added to the solid phase of the hydroxyapatite powder. The properties exhibited by the chitosan-hydroxyapatite composites were characteristic of bioceramics applied as bone substitutes. Hydroxyapatite contents ranging from 85 to 98% (w/w) resulted in suitable bioceramic composites for bone regeneration, since they showed a non-decaying behavior, good mechanical properties and suitable pore sizes.

Impregnation and release of aspirin from chitosan/poly(acrylic acid) graft copolymer microspheres.

The purpose of this study was to produce aspirin-impregnated microspheres of chitosan/poly(acrylic acid) copolymer in order to evaluate the release characteristics as a function of pH, simulating the fluids in the gastrointestinal tract. Chitosan microspheres were obtained by the coacervation-phase separation method, induced by the addition of a non-solvent (NaOH 2.0 M solution). The microspheres were cross-linked with glutaraldehyde, reduced with sodium cianoborohydride and grafted with poly(acrylic acid). The impregnation of aspirin into chitosan/poly(acrylic acid) copolymer microspheres was achieved by the dissolution of the drug in water:ethanol (2:1), which was adsorbed by the microspheres for 24h at 25 degrees C. The efficiency of aspirin impregnation was high (approximately 94%). The approach employed herein in the production of aspirin-impregnated microspheres using chitosan/poly(acrylic acid) can be a suitable drug-release control system.

Microspheres of chitosan/poly(vinylalcohol) incorporating tetrasulphonated copper (II) phthalocyanine: preparation and characterization.

Tetrasulphonated copper (II) phthalocyanine (TCP), in the salt form, was incorporated into a blend of chitosan (CTS)/poly(vinylalcohol) (PVA) and microspheres were produced using the method of salt coacervation with (approximately 20% w/v) sodium sulphate. Spectroscopic analysis, DSC and TGA were carried out to characterize the form in which the macro-complex was immobilized in the blend. Alkaline treatment of the coagulating medium produces species which are more stable, but with a different morphology observed by scanning electronic microscopy (SEM). Microspheres coagulated in sodium sulphate and also in an alkaline salt medium (0.5 and 2.0 M NaOH) were exposed to a solution of the dye, methylene blue, at an initial concentration of 7 mg/l and maintained in contact for 14 h at 26 +/- 1 degrees C. The kinetic data revealed a decrease in the capacity of sorption of the microspheres that had received the alkaline treatment. It is proposed that the new morphology attributed to these species blocks some sites for complex formation, making them inaccessible to the dye.