Freeze-drying of bupivacaine lipospheres: preparation, characterization, and evaluation of anti-microbial properties.

PURPOSE: To prepare freeze-dried bupivacaine lipospheres intended for topical application in burn injuries. The aim was improving the storage stability and developing a prolonged release pattern to tackle the adverse reactions resulting from the frequent administration of bupivacaine. METHODS: The lipospheres were prepared by hot-melt dispersion method employing bupivacaine base at 1.5 and 3%w/w, tristearin 6% w/w as the core while dipalmitoyl phosphatidylcholine (DPPC) and soy phosphatidylcholine (SPC) as the coat at 0.75, 1.5 and 3% w/w. The lotion was then freeze-dried and cryoprotected by sucrose 3% w/w. Evaluation was carried out through loading and release analysis, storage study, particle characterization including morphology, zeta potential and particle size as well as anti-microbial assessment. RESULTS: The highest loading, (87.6 ± 0.1%), was achieved using bupivacaine 3% and SPC 0.75%. After 6 months of storage at 4 ͦC, the loading in the lotion and the freeze-dried samples were 17.4 ± 0.2 and 87.2 ± 0.3%, respectively. In vitro dissolution test demonstrated 94.5% and 95% of bupivacaine release from lotion and freeze-dried samples, after 24 h. The respective zeta potential of -1.30 and 26 mV was recorded for lotion and solid-state bupivacaine. Micromeritic evaluation of freeze-dried powder exhibited particle size of 35.23 ± 2.02 µm and highly-wrinkled-irregular morphology without detectable needle structures related to drug free crystals. The powder had rapid reconstitution property and antibacterial activity. CONCLUSION: Freeze- drying holds a promising potential to improve the storage stability of bupivacaine lipospheres with well- preserved release pattern and particle properties for further topical application.

Chitosan and its amphiphilic derivative nanoparticles loaded with Minoxidil for induction of hair growth: In vitro and in vivo evaluation.

Minoxidil is widely used for treating Androgenic Alopecia, but its low hydrophilicity promotes the use of co-solvents in commercial formulations, which could then cause skin irritations. Nano-drug delivery systems have been developed to improve the solubility of lipophilic molecules and increase the concentration of drugs in hair follicles, thereby minimizing side effects. Chitosan (CS) and Methylated Aminobenzyl Carboxymethyl Chitosan (MCS) nanoparticles containing Minoxidil were prepared and evaluated for their physicochemical properties, drug release profile, skin permeation, cytotoxicity, and animal hair growth. The results showed that MCS nanoparticles had a 60 % drug release compared to CS nanoparticles, with almost complete release in 2 h. MCS nanoparticles also showed a 20 % drug permeation from skin compared to 70 % for CS nanoparticles in 24 h. In 48 and 72 h, CS and MCS nanoparticles didn't exhibit any significant cytotoxicity. Animal study revealed a significant increase in hair growth from MCS nanoparticles compared to the commercial formulation in fourteen days. However, MCS nanoparticles were less efficient compared to CS nanoparticles. The use of MCS in nano-drug delivery systems is expected to continue to gain importance due to its ability to enhance the solubility of hydrophobic drugs, particularly in the treatment of skin diseases.

ChAdOx1 nCoV-19 Vaccine and Thrombosis with Thrombocytopenia Syndrome among Adults: A Systematic Review.

Several vaccine-induced thrombotic thrombocytopenia syndrome (VITTS) cases have been reported after the ChAdOx1 nCov-19 vaccination. The current study systematically reviewed the reported post-ChAdOx1 nCoV-19 vaccination thrombotic thrombocytopenia cases. Their laboratory and clinical features, as well as the diagnostic and therapeutic measures, were investigated. Online databases were searched until 25 August 2021. Studies reporting post-ChAdOx1 nCov-19 vaccination thrombotic thrombocytopenia syndrome (TTS) were included. Overall, 167 cases (21-77 years old) from 53 publications were included showing a female dominance of 1.75 times. About 85% of the cases exhibited the primary symptoms within the first two weeks post-vaccination. Headache was the most common initial symptom (>44.2%), and hemorrhage/thrombotic problems (22.46%), as well as discoordination/weakness/numbness/ hemiparesis/cyanotic toes (19.6%), were the most prevalent uncommon initial symptoms. Prothrombin time (PT), D-dimers, and C-reactive protein were the most remarkable increased laboratory parameters in 50.6%, 99.1%, and 55.6% of cases, respectively. In comparison, platelet and fibrinogen were the most remarkable decreased laboratory parameters in 92.7% and 50.5% of cases, respectively. Most VITT cases presented with cerebral venous thrombosis/cerebral venous sinus thrombosis, supraventricular tachycardia, transverse sinus/cerebral thrombosis, pulmonary embolism, and cerebral hemorrhage. Anti-PF4 antibody measurement through immunoassays and functional assays were positive in 86.2% and 73% of cases, respectively. About 31% of the cases died. Early diagnosis and proper therapeutic measures are important in ChAdOx1 nCov-19 vaccine-induced VITTS patients. Therefore, experts are recommended to know the corresponding clinical and laboratory features, as well as diagnostic methods. Elucidation of the pathophysiologic mechanism of ChAdOx1 nCov-19 vaccine-induced TTS deserves further investigation.

Prospects and challenges of synergistic effect of fluorescent carbon dots, liposomes and nanoliposomes for theragnostic applications.

The future of molecular-level therapy, efficient medical diagnosis, and drug delivery relies on the effective theragnostic function which can be achieved by the synergistic effect of fluorescent carbon dots (FCDs) liposomes (L) and nanoliposomes. FCDs act as the excipient navigation agent while liposomes play the role of the problem-solving agent, thus the term "theragnostic" would describe the effect of LFCDs properly. Liposomes and FCDs share some excellent at-tributes such as being nontoxic and biodegradable and they can represent a potent delivery system for pharmaceutical compounds. They enhance the therapeutic efficacy of drugs via stabilizing the encapsulated material by circumventing barriers to cellular and tissue uptake. These agents facilitate long-term drug biodistribution to the intended locations of action while eliminating systemic side effects. This manuscript reviews recent progress with liposomes, nanoliposomes (collectively known as lipid vesicles) and fluorescent carbon dots, by exploring their key characteristics, applications, characterization, performance, and challenges. An extensive and intensive understanding of the synergistic interaction between liposomes and FCDs sets out a new research pathway to an efficient and theragnostic / theranostic drug delivery and targeting diseases such as cancer.

Metformin exerts synergistic anti-proliferative effects with liraglutide in human umbilical vein endothelial cells (HUVECs).

Objectives: Metformin (Met) and liraglutide (Lira) have been approved to treat type 2 diabetes mellitus and have cardioprotective effects. Materials and Methods: Human umbilical vein endothelial cells (HUVECs) were incubated with Met, Lira, or their combination in this study. Results: Results showed that the synergistic inhibitory effect of the two drugs on HUVECs proliferation was significant (75%) after 48 hr drug exposure. In addition, either Lira or Met alone had a marked tendency to inhibit the migration of HUVECs (42% and 39%). Almost a complete inhibition (97%) was demonstrated in combinational use after 48 hr treatment. After combining these two drugs, the apoptosis rate raised to 68%, which was a significant approval of synergistic apoptosis induction of Met and Lira. The combinational group indicated a substantial increase in VEGF, PDGF, and MMP-9 at 24 hr compared with the control. Conclusion: This study showed that combination therapy with Lira and Met could effectively reduce cell proliferation, induce apoptosis, and inhibit cell migration in the HUVECs. This study provides evidence to support using Met in combination with Lira as a treatment option for patients with type-2 diabetes and cancer.

Spray freeze drying to solidify Nanosuspension of Cefixime into inhalable microparticles.

PURPOSE: Spray-freeze drying (SFD) incorporating diverse carbohydrates and leucine was employed to obtain dried nanosuspension of cefixime with improved dissolution profile, good dispersibility, and excellent inhalation performance. METHODS: Nanoprecipitation was utilized to prepare nanoparticles (NPs). Nanosuspensions of cefixime were solidified via SFD to access inhalable microparticles. The aerosolization efficiencies were evaluated through twin stage impinger (TSI). Laser light scattering and scanning electron microscopy (SEM) provided assistance to determine the particle size/size distribution and morphology, respectively. Amorphous/ crystalline states of materials were examined via differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Release profiles of candidate preparations were evaluated. RESULTS: The fine particle fraction (FPF) ranged from 18.96 ± 0.76 to 79.28 ± 0.45%. The highest value resulted from trehalose with NP/carrier ratio of 1:1 and leucine 20%. The particle size varied from 5.24 ± 0.97 to 10.17 ± 1.01 µm. The most and the least size distribution were achieved in mannitol and trehalose containing formulations, respectively. The majority of samples demonstrated ideally spherical morphology with diverse degrees of porosity and without needle-shaped structure. Percentages of release in F7 and F8 were 89.33 ± 0.88% and 93.54 ± 1.02%, respectively, via first 10 min. CONCLUSION: SFD of nanosuspensions can be established as a platform for the pulmonary delivery of poorly water-soluble molecules of cefixime. Trehalose and raffinose with a lower ratio of NP to the carrier and higher level of leucine could be introduced as favorable formulations for further respiratory delivery of cefixime.

Spray freeze-drying for inhalation application: process and formulation variables.

High porous particles with specific aerodynamic properties were processed by the spray freeze-drying (SFD) method. Comprehensive knowledge about all aspects of the SFD method is required for particle engineering of various pharmaceutical products with good flow properties. In this review, different types of the SFD method, the most frequently employed excipients, properties of particles prepared by this method, and most recent approaches concerning SFD are summarized. Generally, this technique can prepare spherical-shaped particles with a highly porous interior structure, responsible for the very low density of powders. Increasing the solubility of spray freeze-dried formulations achieves the desired efficacy. Also, due to the high efficiency of SFD, by determining the different features of this method and optimizing the process by model-based studies, desirable results for various inhaled products can be achieved and significant progress can be made in the field of pulmonary drug delivery.

Growth Promotion and Increased ATP-Binding Cassette Transporters Expression by Liraglutide in Triple Negative Breast Cancer Cell Line MDA-MB-231.

BACKGROUND: Glucagon-like petide-1 (GLP-1) agonists such as liraglutide are widely employed in type 2 diabetes due to their glucose reducing properties and small risk of hypoglycemia. Recently, it has been shown that GLP-1agonists can inhibit breast cancer cells growth. Nonetheless, concerns are remained about liraglutide tumor promoting effects as stated by population studies. MATERIAL AND METHODS: We evaluated the effects liraglutide on proliferation of MDA-MB-231 cells by MTT assay and then ATP-binding cassette (ABC) transporters expressions assessed by Real time PCR. Statistical comparisons were made using one-way analysis of variance followed by a post hoc Dunnett test. RESULTS: Here, we report that liraglutide can stimulate the growth of highly invasive triple negative cell line MDA-MB-231; which can be attributed to AMPK-dependent epithelial-mesenchymal transition (EMT) happening in MDA-MB-231 context. Toxicity effects were only observed with concentrations far above the serum liraglutide concentration. ATP-binding cassette (ABC) transporters expressions were upregulated, indicating the possible drug resistance and increased EMT. CONCLUSION: In conclusion, these results suggest that liraglutide should be used with caution in patients who are suffering or have the personal history of triple negative breast cancer. However, more detailed studies are required to deepen understanding of liraglutide consequences in triple negative breast cancer. ▶Graphical Abstract.

Hydroxypropyl beta cyclodextrin: a water-replacement agent or a surfactant upon spray freeze-drying of IgG with enhanced stability and aerosolization.

The great potential of hydroxypropyl beta-cyclodextrin (HPßCD), as a dried-protein stabilizer, has been attributed to various mechanisms namely water-replacement, vitrification and surfactant-like effects. Highlighting the best result in our previous study (weight ratio IgG: HPßCD of 1:0.4), herein we designed to evaluate the efficacy of upper (1:2) and lower (1:0.05) ratios of HPßCD in stabilization and aerosol properties of spray freeze-dried IgG. The protective effect of HPßCD, as measured by size exclusion chromatography (SEC-HPLC) was most pronounced at C3' and C3″, IgG:trehalose:HPßCD ratios of 1:2:0.25 and 1:2:0.05 with aggregation rate constants of 0.46 ± 0.02 and 0.58 ± 0.01 (1/month), respectively. The secondary conformations were analyzed through Fourier transform infrared spectroscopy (FTIR) and all powders well-preserved with the lack of any visible fragments qualified through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PPAGE). Scanning electron microscopy (SEM) and twin stage impinger (TSI) were employed to characterize the suitability of particles for further inhalation therapy of antibodies and the highest values of fine particle fraction (FPF) were achieved by C3' and C3″, 56.43 and 48.12%. The powders produced at the current ratio 1:2:0.25 and 1:2:0.05 are superior to our previous examination with regards to manifesting lower aggregation and comparable FPF values.

Human Serum Albumin, a Suitable Candidate to Stabilize Freeze-Dried IgG in Combination with Trehalose: Central Composite Design.

Freeze-dried immunoglobulin G (IgG) incorporating trehalose and human serum albumin (HSA) was statistically evaluated regarding the existence of synergism between additives on the stability profile. The levels of HSA (X1) and trehalose (X2) were independent variables. Aggregation following the process (Y1), after 2 and 3 months at 40°C (Y2) and (Y3), respectively, along with the rate constant of aggregation (Y4) were dependent variables. Aggregation and beta-sheet conformation were quantified through size-exclusion chromatography (SEC-HPLC) and Fourier transform infrared spectroscopy (FTIR). Central composite design (CCD) suggested the best formulation. The integrity and thermodynamic stability of optimized formulation were investigated through sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and differential scanning calorimetry (DSC). The calculated responses were Y1, 0-0.90%; Y2, 0.4-4.3%; Y3, 2.10-13.46%; and Y4, 0.16-0.69 1/month. The optimized formulation had 10 mg IgG, 86 mg trehalose, and 1 mg HSA with observed responses of Y1, 0.01%; Y2, 0.51%; Y3, 3.08%; and Y4, 0.33 1/month. The models were statistically well-fitted. The optimized formulation was amorphous during freeze-drying (FD), and no fragmentation was observed. Trehalose and HSA demonstrated statistical synergism. CCD was successfully employed to recommend the best ratio of stabilizers and achieve the maximum stabilization of IgG as a model freeze-dried antibody.

Optimization of Stable IgG Formulation Containing Amino Acids and Trehalose During Freeze-Drying and After Storage: a Central Composite Design.

The physical and structural stability of freeze-dried immunoglobulin G (IgG) were examined by applying trehalose and amino acids (glycine, phenylalanine, and serine). The efficacy of amino acids was statistically compared considering their side-chain characteristics. The amount of amino acids (X1) and trehalose (X2) was considered as independent variables. Size exclusion chromatography (SEC-HPLC) was utilized to calculate the soluble aggregates, as dependent variables. The amounts of excipients were optimized through the central composite design (CCD). The beta-sheet conformation of IgG was quantified by Fourier transform infrared spectroscopy (FTIR). Thermal behavior and molecular integrity of IgG were evaluated by differential scanning calorimetry (DSC) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Optimized formulations of powders were as follows: 24.5 mg serine-139.5 mg trehalose, 14 mg glycine-118 mg Trehalose, and 25 mg phenylalanine-139.5 mg trehalose. The amounts of soluble aggregates after processing were 0, 4.50, and 2.20%, respectively. The corresponding induced aggregates following storage conditions were 1.02, 7.0, and 3.70%. In all preparations, there were no detectable fragments. The native conformation of IgG was well preserved in the presence of amino acids. Excluding the glycine-based sample with minor endotherm at about 45°C, serine and phenylalanine incorporating powders were fully amorphous at examination temperatures. Trehalose was more potent than the amino acids in the stabilization of IgG. Serine was the most effective amino acid; phenylalanine and glycine were the next ones, respectively. Glycine crystallization was assumed to have accounted for low stabilization capability. The statistically synergistic phenomenon was only observed in the co-application of trehalose and phenylalanine. Graphical abstract.

Respiratory Administration of Infliximab Dry Powder for Local Suppression of Inflammation.

The airways are verified as a relevant route to improve antibody therapeutic index with superior lung concentration but limited passage into systemic blood stream. The current research aimed to process spray-dried (SD) powder of Infliximab to assess the feasibility of respiratory delivery of antibody for local suppression of lung-secreted tumor necrosis factor α (TNFα). Molecular and structural stability of powders were determined through size exclusion chromatography (SEC-HPLC) and Fourier transform infrared (FTIR) spectroscopy. Particle properties were characterized by laser light scattering, twin stage impinger (TSI), and scanning electron microscopy (SEM). In vitro biological activity was quantified applying L-929 cell line. Ovalbumin (OVA)-challenged balb/c mice were employed to evaluate the anti-TNFα activity of antibody formulation as in vivo experimental model. SD sample consisting of 36 mg trehalose, 12 mg cysteine, and 0.05% of Tween 20 was selected with minimum aggregation/fragmentation rate constants of 0.07 and 0.05 (1/month) based on 1 and 2 months of storage at 40°C and relative humidity of 75%. Fine particle fraction (FPF) value of this formulation was 67.75% with desired particle size and surface morphology for respiratory delivery. EC50 was 8.176 and 6.733 ng/ml for SD Infliximab and Remicade®, respectively. SD antibody reduced TNFα (26.56 pg/ml) secretion in mouse lung tissue, more than 2 orders of magnitudes comparing positive control group (TNFα, 68.34 pg/ml). The success of antibody inhalation mainly depended on the spray drying condition, formulation components, and stability of antibody within aerosolization. Inhaled Infliximab could be a potential drug for local inhibition of lung inflammation.

Application of disaccharides alone and in combination, for the improvement of stability and particle properties of spray-freeze dried IgG.

PURPOSE: Spray-freeze drying (SFD) is a recently applied method to develop pharmaceutical powders. This study aimed to analyze the competence of Trehalose, Mannitol, Lactose, and Sorbitol instability and aerosolization of Immunoglobulin G (IgG) via SFD. METHODS: Induced soluble aggregates were quantified at 0 and 3 months, and 45 °C using size-exclusion chromatography. Conformation and thermogravimetric assessments were done by Fourier transform infrared spectroscopy and differential scanning calorimetry. Laser light scattering was performed to determine the particle sizes. Aerodynamic features were characterized by twin stage impinger and scanning electron microscopy. RESULTS: Although sugars/polyols preferably stabilized IgG following the process, storage stabilization was achieved in Trehalose, Trehalose-Lactose, Lactose, and Trehalose-Mannitol-based powders with soluble aggregates <5%. The conformation of antibody was preserved with ß sheet content from 66.28% to 76.37%. Particle sizes ranged from 5.23 to 8.12 µm. Mannitol exhibited the best aerodynamic behavior, fine particle fraction (FPF: 70%) but high degree of protein aggregation during storage. CONCLUSIONS: SFD could favorably stabilize antibody using Trehalose and its combination with Lactose and Mannitol, and also, Lactose alone. Sorbitol disturbed IgG powder recovery. Incorporation of other types of excipient is required for efficient respiratory delivery of IgG molecules.

Spray-Freeze Drying: a Suitable Method for Aerosol Delivery of Antibodies in the Presence of Trehalose and Cyclodextrins.

We aimed to prepare spray-freeze-dried powder of IgG considering physicochemical stability and aerodynamic aspects. Spray-freeze drying (SFD) exposes proteins to various stresses which should be compensated by suitable stabilizers. The competence of cyclodextrins (CDs), namely beta-cyclodextrin (ßCD) and hydroxypropyl ßCD (HPßCD), at very low concentrations, was investigated in the presence of separate mannitol- and trehalose-based formulations. Spray-freeze-dried preparations were quantified in terms of monomer recovery and conformation by size exclusion chromatography (SEC-HPLC) and Fourier transform infrared (FTIR) spectroscopy, respectively. Differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) were employed to identify the thermal characteristics of powders. Particle morphology was visualized by scanning electron microscopy (SEM). Aerodynamic behavior of powders was checked through an Anderson cascade impactor (ACI). Although all formulations protected antibody from aggregation during the SFD process (aggregation < 1%), mannitol-containing ones failed upon the storage (19.54% in the worst case). Trehalose-HPßCD incomparably preserved the formulation with fine particle fraction (FPF) of 51.29%. Crystallization of mannitol resulted in IgG destabilization upon storage. Although employed concentration of CDs is too low (less than 50:1 molar ratio to protein), they successfully served as stabilizing agents in SFD with perfect improvement in aerosol functionality. Graphical Abstract ᅟ.

Salinomycin nanoparticles interfere with tumor cell growth and the tumor microenvironment in an orthotopic model of pancreatic cancer.

AIMS: Recently, salinomycin (SAL) has been reported to inhibit proliferation and induce apoptosis in various tumors. The aim of this study was to deliver SAL to orthotopic model of pancreatic cancer by the aid of poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs). METHODS: The NPs were physico-chemically characterized and evaluated for cytotoxicity on luciferase-transduced AsPC-1 cells in vitro as well as implanted orthotopically into the pancreas of nude mice. RESULTS: SAL (3.5 mg/kg every other day) blocked tumor growth by 52% compared to the control group after 3 weeks of therapy. Western blotting of tumor protein extracts indicated that SAL treatment leads to up-regulation of E-cadherin, ß-catenin, and transforming growth factor beta receptor (TGFßR) expressions in AsPC-1 orthotopic tumor. Noteworthy, immunofluorescence staining of adjacent tumor sections showed that treatment with SAL NPs cause significant apoptosis in the tumor cells rather than the stroma. Further investigations also revealed that TGFßR2 over-expression was induced in stroma cells after treatment with SAL NPs. CONCLUSION: These results highlight SAL-loaded PLGA NPs as a promising system for pancreatic cancer treatment, while the mechanistic questions need to be subsequently tested.

Optimization and characterization of spray-dried IgG formulations: a design of experiment approach.

BACKGROUND: The purpose of the present study is to optimize a spray-dried formulation as a model antibody regarding stability and aerodynamic property for further aerosol therapy of this group of macromolecules. METHOD: A three-factor, three-level, Box-Behnken design was employed milligrams of Cysteine (X1), Trehalose (X2), and Tween 20 (X3) as independent variables. The dependent variables were quantified and the optimized formulation was prepared accordingly. SEC-HPLC and FTIR-spectroscopy were conducted to evaluate the molecular and structural status of spray-dried preparations. Particle characterization of optimized sample was performed with the aid of DSC, SEM, and TSI examinations. RESULTS: Experimental responses of a total of 17 formulations resulted in yield values, (Y1), ranging from 21.1 ± 0.2 to 40.2 ± 0.1 (%); beta-sheet content, (Y2), from 66.22 ± 0.19 to 73.78 ± 0.26 (%); amount of aggregation following process, (Y3), ranging from 0.11 ± 0.03 to 0.95 ± 0.03 (%); and amount of aggregation upon storage, (Y4), from 0.81 ± 0.01 to 3.13 ± 0.64 (%) as dependent variables. Results-except for those of the beta sheet content-were fitted to quadratic models describing the inherent relationship between main factors. CONCLUSION: Co-application of Cysteine and Tween 20 preserved antibody molecules from molecular degradation and improved immediate and accelerated stability of spry-dried antibodies. Validation of the optimization study indicated high degree of prognostic ability of response surface methodology in preparation of stable spray-dried IgG. Graphical abstract Spray drying of IgG in the presence of Trehalose, Cysteine and Tween 20.

Effect of molecular weight and ratio of poly ethylene glycols' derivatives in combination with trehalose on stability of freeze-dried IgG.

The influence of poly ethylene glycol (PEG) at different molecular weights (MWs) and ratios was studied on the stability of freeze-dried immune globulin G (IgG). PEGs (600-4000 Dalton) at concentrations of 0.5 and 5% W/V were applied in the presence of 40 and 60% W/W of trehalose to prepare freeze-dried IgG formulations. Size-exclusion chromatography, infra-red spectroscopy, differential scanning calorimeter, and gel electrophoresis were performed to characterize lyophilized samples. Pure IgG demonstrated the highest aggregation of 5.77 ± 0.10% after process and 12.66 ± 0.50% as well as 44.69 ± 0.50% upon 1 and 2 months of storage at 45 °C, respectively. 5% W/V of PEGs 4000 in combination with 40% W/W trehalose, significantly suppressed aggregation, 0.05 ± 0.01%, with minimum aggregation rate constant of 0.32 (1/month). The integrity of IgG molecules and secondary conformation were properly preserved in all formulations comparing native IgG. It could be concluded that appropriate concentration and MW of PEGs, prominently augmented stabilizing effect of trehalose on freeze-dried antibody through inserting additional supportive mechanisms of actions.

The effect of freeze-dried antibody concentrations on its stability in the presence of trehalose and hydroxypropyl-ß-cyclodextrin: a Box-Behnken statistical design.

The present study aimed at preparation and optimization of stable freeze-dried immunoglobulin G (IgG) applying proper amount of antibody with efficient combination of trehalose and hydroxypropyl-ß-cyclodextrin (HPßCD). Response surface methodology was employed through a three-factor, three-level Box-Behnken design. Amounts of IgG (X1), trehalose (X2) and HPßCD (X3) were independent variables. Aggregation following process (Y1), after one month at 45 °C (Y2), upon two month at 45 °C (Y3) and beta-sheet content of IgG (Y4) were determined as dependent variables. Results were fitted to quadratic models (except for beta-sheet content), describing the inherent relationship between main factors. Optimized formulation composed of 55.85 mg IgG, 52.51 mg trehalose and 16.01 mg HPßCD was prepared. The calculated responses of the optimized formulation were as follows: Y1 = 0.19%, Y2 = 0.78%, Y3 = 1.88% and Y4 = 68.60%, respectively. The thermal analysis confirmed the amorphous nature of optimum formulation and the integrity of IgG was shown to be favorably preserved. Validation of the optimization study demonstrated high degree of prognostic ability. The DOE study successfully predicted the optimum values of antibody as well as stabilizers for desirable process and storage stabilization of freeze-dried IgG.

The use of amino acids to prepare physically and conformationally stable spray-dried IgG with enhanced aerosol performance.

This study investigated the effect of various amino acids on the molecular and thermodynamic stability of IgG (immune globulin G) as well as its aerosol performance. The antibody was spray-dried in the presence of different amino acids (leucine, phenylalanine, cysteine, glycine, lysine and arginine) using 20% and 50% (w/w) amino acid. SEC-HPLC, SDS-PAGE and IR-spectroscopy were performed to evaluate the stability of spray-dried IgG. The in-vitro aerosol performance of the well-stabilized formulations was subsequently assessed. IgG containing phenylalanine at 20 and 50% w/w produced the lowest content of aggregated antibody (1.35 ± 0.24%) and (1.12 ± 0.15%). The application of phenylalanine and cysteine at 50% (w/w) demonstrated the best storage stability (2 month at 45°C) with a rate constant of 0.006/month and enhanced fine particle fractions of 62.43 ± 0.34% and 70.51 ± 0.23%, respectively. Samples containing 50% arginine exhibited significantly perturbed conformation and, consequently, the highest aggregation rate constant of 0.019/month following storage. These results indicate that phenylalanine and cysteine serve as efficacious amino acids for the preparation of IgG dry powder with regard to stability and aerodynamic properties.

Evaluation of bioactivity and pharmacokinetic characteristics of PEGylated P.pastoris-expressed erythropoietin.

High costs of production and relatively short serum half-life of mammalian cell-derived recombinant human erythropoietin (rHuEpo) necessitate finding and developing superior hosts/technologies for more efficient production of longer-acting erythropoietic agents. With these aims, we provide the first report on reductive alkylation of low-cost P.pastoris-expressed rHuEpo (PPEpo) with PEG-aldehyde. The PCR-amplified cDNA of native rHuEpo was cloned into the pPICZαA vector and transformed into the yeast Pichia pastoris. The best expressing transformant was selected and employed for secreted-expression of PPEpo using the standard protocols. Purified PPEpo was N-terminally PEGylated with 20-kDa mPEG-propionaldehyde in a low pH (5) condition. The in vitro and in vivo biological activities of purified mono-PEGylated PPEpo was evaluated by the UT-7 cells proliferation assay and normocythaemic mice assay, respectively. Pharmacokinetic parameters were determined following intravenous administration of Epo proteins in rabbits. While PPEpo showed a higher in vitro bioactivity compared to rHuEpo, no in vivo efficiency was determined for PPEpo. However, the in vivo activity of PEG-PPEpo conjugate was comparable to that of rHuEpo. Pharmacokinetic studies showed that the terminal half-life and mean residence time of PEG-PPEpo were increased approximately 4-fold and 6.5-fold respectively, compared with those of PPEpo. The results indicate that N-terminal PEGylation of Pichia-expressed Epo could be considered as a promising approach for generating cost-effective and long-acting erythropoiesis-stimulating agents.