Hybrid 3C-silicon carbide-lithium niobate integrated photonic platform.

In this paper, we demonstrate a novel hybrid 3C-silicon carbide-lithium niobate (3C-SiC-LN) platform for passive and active integrated nanophotonic devices enabled through wafer bonding. These devices are fabricated by etching the SiC layer, with the hybrid optical mode power distributed between SiC and LN layers through a taper design. We present a racetrack resonator-based electro-optic (EO) phase shifter where the resonator is fabricated in SiC while using LN for EO-effect (r33≈ 27 pm/V). The proposed phase shifter demonstrates efficient resonance wavelength tuning with low voltage-length product (Vπ.Lπ ≈ 2.18 V cm) using the EO effect of LN. This hybrid SiC-LN platform would enable high-speed, low-power, and miniaturized photonic devices (e.g., modulators, switches, filters) operable over a broad range of wavelengths (visible to infrared) with applications in both classical and quantum nanophotonics.

Enhanced poling and infiltration for highly efficient electro-optic polymer-based Mach-Zehnder modulators.

An ultra-narrow 40-nm slotted waveguide is fabricated to enable highly efficient, electro-optic polymer modulators. Our measurement results indicate that VπL's below ∼ 1.19 V.mm are possible for the balanced Mach-Zehnder modulators using this ultra-narrow slotted waveguide on a hybrid silicon-organic hybrid platform. Our simulations suggest that VπL's can be further reduced to ∼ 0.35 V.mm if appropriate doping is utilized. In addition to adapting standard recipes, we developed two novel fabrication processes to achieve miniaturized devices with high modulation sensitivity. To boost compactness and decrease the overall footprint, we use a fabrication approach based on air bridge interconnects on thick, thermally-reflowed, MaN 2410 E-beam resist protected by an alumina layer. To overcome the challenges of high currents and imperfect infiltration of polymers into ultra-narrow slots, we use a carefully designed, atomically-thin layer of TiO2 as a carrier barrier to enhance the efficiency of our electro-optic polymers. The anticipated increase in total capacitance due to the TiO2 layer is negligible. Applying our TiO2 surface treatment to the ultra-narrow slot allows us to obtain an improved index change efficiency (∂n/∂V) of ∼ 22% for a 5 nm TiO2 layer. Furthermore, compared to non-optimized cases, our peak measured current during poling is reduced by a factor of ∼ 3.

Polysilicon micro-heaters for resonance tuning in CMOS photonics.

A new, to the best of our knowledge, device platform for tuning the resonance wavelength of integrated photonic resonators based on polysilicon-based micro-heaters for complementary metal-oxide semiconductor (CMOS)-foundry-based active Si photonics is demonstrated. The miniaturized micro-heater can be placed directly on the active Si layer, with a pedestal providing the optical and electrical isolation needed for the implementation of ultrafast active photonic devices such as modulators. The demonstrated devices do not require any additional modifications to the standard CMOS foundry processes. Experiments demonstrate a tuning efficiency of 0.25 nm/mW (or 42 GHz/mW) for a 5-µm-radius microdisk resonator with a loaded quality factor (Q) > 35,000. This polysilicon-based heater demonstrates a tunability of 42 GHz/mW with an average switching time of 60 µs. The proposed compact heater architecture enables it to be kept near to the optical mode, thereby providing efficient and high-speed wavelength tuning for resonant devices.

Dynamically tunable third-harmonic generation with all-dielectric metasurfaces incorporating phase-change chalcogenides.

Subwavelength nonlinear optical sources with high efficiency have received extensive attention, although strong dynamic controllability of these sources is still elusive. Germanium antimony telluride (GST) as a well-established phase-change chalcogenide is a promising candidate for the reconfiguration of subwavelength nanostructures due to the strong non-volatile change of the index of refraction between its amorphous and crystalline states. Here, we numerically demonstrate an electromagnetically-induced-transparency-based silicon metasurface actively controlled with a quarter-wave asymmetric Fabry-Perot cavity incorporating GST to modulate the relative phase of incident and reflected pump beams. We demonstrate a giant third-harmonic generation (THG) switch with a modulation depth as high as ∼70dB at the resonant band. We also demonstrate the possibility of multi-level THG amplitude modulation for the fundamental C-band by controlling the crystallization fraction of GST at multiple intermediate states. This study shows the high potential of GST-based fast dynamic nonlinear photonic switches for real-world applications ranging from communications to optical computing.

High-Q ultrasensitive integrated photonic sensors based on slot-ring resonator on a 3C-SiC-on-insulator platform.

We demonstrate, to the best of our knowledge, the first high-Q silicon carbide (SiC) integrated photonic sensor based on slot-ring resonators on a 3C-SiC-on-insulator (SiCOI) platform. We experimentally demonstrate an intrinsic Q of 17,400 at around 1310 nm wavelength for a slot-ring resonator with 40 µm radius with water cladding. By applying different concentrations of a sodium chloride (NaCl) solution that covers the devices, measured bulk sensitivities of 264-300 nm/RIU (refractive index unit) are achieved in the slot-ring resonator with a 400-450 nm rail width and a 100-200 nm slot width. The device performance for biomolecular layer sensing (BMLS) is proved by the detection of the cardiac biomarker troponin with 248-322 pm/nm surface sensitivity. The reported slot-ring resonators can be of great interest for diverse sensing applications from visible to infrared wavelengths.

ITO-based microheaters for reversible multi-stage switching of phase-change materials: towards miniaturized beyond-binary reconfigurable integrated photonics.

Inducing a large refractive-index change is the holy grail of reconfigurable photonic structures, a goal that has long been the driving force behind the discovery of new optical material platforms. Recently, the unprecedentedly large refractive-index contrast between the amorphous and crystalline states of Ge-Sb-Te (GST)-based phase-change materials (PCMs) has attracted tremendous attention for reconfigurable integrated nanophotonics. Here, we introduce a microheater platform that employs optically transparent and electrically conductive indium-tin-oxide (ITO) bridges for the fast and reversible electrical switching of the GST phase between crystalline and amorphous states. By the proper assignment of electrical pulses applied to the ITO microheater, we show that our platform allows for the registration of virtually any intermediate crystalline state into the GST film integrated on the top of the designed microheaters. More importantly, we demonstrate the full reversibility of the GST phase between amorphous and crystalline states. To show the feasibility of using this hybrid GST/ITO platform for miniaturized integrated nanophotonic structures, we integrate our designed microheaters into the arms of a Mach-Zehnder interferometer to realize electrically reconfigurable optical phase shifters with orders of magnitude smaller footprints compared to existing integrated photonic architectures. We show that the phase of optical signals can be gradually shifted in multiple intermediate states using a structure that can potentially be smaller than a single wavelength. We believe that our study showcases the possibility of forming a whole new class of miniaturized reconfigurable integrated nanophotonics using beyond-binary reconfiguration of optical functionalities in hybrid PCM-photonic devices.

In Vivo Tissue Implantation Model of In Vivo Tissue Implantation Model of Lidocaine (LCH)-Encapsulated Dextran (DEX)/Glycol (GLY) Nanoparticles Delivery for Pain Management.

Lidocaine-loaded nanoparticles are versatile nanomaterials that may be used in pain treatment due to their wound healing properties. The current study describes a wound dressing formulation focused on lidocaine-loaded dextran/ethylene glycol nanoparticles (an anesthetic drug). The lidocaine-loaded dextran/ethylene glycol membranes were fabricated using lidocaine solutions inside the dextran/ethylene glycol medium. The influence of various experimental conditions on dextran/ethylene glycol nanoparticle formations were examined. The sizes of dextran/ethylene glycol and lidocaine-loaded dextran/glycol nanoparticles were examined through the HR-SEM. Moreover, the efficacy antibacterial activity of dextran/glycol and lidocaine-loaded dextran/ethylene glycol nanoparticles was evaluated against the microorganisms grampositive and negative. Furthermore, we observed the In Vivo wound healing of wounds in skin using a mice model over a 16 days period. In this difference to the wounds of untreated mouse, quick healing was observed in the lidocaine-loaded dextran/glycol nanoparticles-treated wounds with fewer injury. These results specify that lidocaine-loaded dextran/ethylene glycol nanoparticles-based dressing material could be a ground-breaking nanomaterial having wound repair and implantations potential required for wound injury in pain management, which was proven using an animal model.

Racetrack microresonator based electro-optic phase shifters on a 3C silicon-carbide-on-insulator platform.

We report, to the best of our knowledge, the first demonstration of integrated electro-optic (EO) phase shifters based on racetrack microresonators on a 3C silicon-carbide-on-insulator (SiCOI) platform working at near-infrared wavelengths. By applying DC voltage in the crystalline axis perpendicular to the waveguide plane, we have observed optical phase shifts from the racetrack microresonators whose loaded quality ($ Q $) factors are $\sim\! {30,\!000}$. We show voltage-length product (${{V}_{\pi}} \cdot {{L}_{ \pi}}$) of ${118}\;{{\rm V}\cdot{\rm cm}}$, which corresponds to an EO coefficient ${{r}_{41}}$ of 2.6 pm/V. The SiCOI platform can be used to realize tunable silicon carbide integrated photonic devices that are desirable for applications in nonlinear and quantum photonics over a wide bandwidth that covers visible and infrared wavelengths.

Dynamic Hybrid Metasurfaces.

Efficient hybrid plasmonic-photonic metasurfaces that simultaneously take advantage of the potential of both pure metallic and all-dielectric nanoantennas are identified as an emerging technology in flat optics. Nevertheless, postfabrication tunable hybrid metasurfaces are still elusive. Here, we present a reconfigurable hybrid metasurface platform by incorporating the phase-change material Ge2Sb2Te5 (GST) into metal-dielectric meta-atoms for active and nonvolatile tuning of properties of light. We systematically design a reduced-dimension meta-atom, which selectively controls the hybrid plasmonic-photonic resonances of the metasurface via the dynamic change of optical constants of GST without compromising the scattering efficiency. As a proof-of-concept, we experimentally demonstrate two tunable metasurfaces that control the amplitude (with relative modulation depth as high as ≈80%) or phase (with tunability >230°) of incident light promising for high-contrast optical switching and efficient anomalous to specular beam deflection, respectively. Our findings further substantiate dynamic hybrid metasurfaces as compelling candidates for next-generation reprogrammable meta-optics.

High-Q microresonators integrated with microheaters on a 3C-SiC-on-insulator platform.

We demonstrate, to the best of our knowledge, the first thermally reconfigurable high-Q silicon carbide (SiC) microring resonators with integrated microheaters on a 3C-SiC-on-insulator platform. We extract a thermo-optic coefficient of around 2.67×10-5/K for 3C-SiC from wavelength shift of a resonator heated by a hot plate. Finally, we fabricate a 40-µm-radius microring resonator with intrinsic Q of 139,000 at infrared wavelengths (∼1550 nm) after integration with a NiCr microheater. By applying current through the microheater, a resonance shift of 30 pm/mW is achieved in the microring, corresponding to ∼50 mW per π phase shift. This platform offers an easy and reliable way for integration with electronic devices as well as great potential for diverse integrated optics applications.

High-Q integrated photonic microresonators on 3C-SiC-on-insulator (SiCOI) platform.

We report a high-quality 3C-silicon carbide (SiC)-on-insulator (SiCOI) integrated photonic material platform formed by wafer bonding of crystalline 3C-SiC to a silicon oxide (SiO2)-on-silicon (Si) substrate. This material platform enables to develop integrated photonic devices in SiC without the need for undercutting the Si substrate, in contrast to the structures formed on conventional 3C-SiC-on-Si platforms. In addition, we show a unique process in the SiCOI platform for minimizing the effect of lattice mismatch during the growth of SiC on Si through polishing after bonding. This results in a high-quality SiCOI platform that enables record high Qs of 142,000 in 40 µm radius SiC microring resonators. The resulting SiCOI platform has a great potential for a wide range of applications in integrated optics, including nonlinear optical devices, quantum optical devices, and high-power optical devices.

Defect-Mediated Alloying of Monolayer Transition-Metal Dichalcogenides.

Alloying plays a central role in tailoring the material properties of 2D transition-metal dichalcogenides (TMDs). However, despite widespread reports, the details of the alloying mechanism in 2D TMDs have remained largely unknown and are yet to be further explored. Here, we combine a set of systematic experiments with ab initio density functional theory (DFT) calculations to unravel a defect-mediated mechanism for the alloying of monolayer TMD crystals. In our alloying approach, a monolayer MoSe2 film serves as a host crystal in which exchanging selenium (Se) atoms with sulfur (S) atoms yields a MoS2 xSe2(1- x) alloy. Our study reveals that the driving force required for the alloying of CVD-grown films with abundant vacancy-type defects is significantly lower than that required for the alloying of exfoliated films with fewer vacancies. Indeed, we show that pre-existing Se vacancies in the host MoSe2 lattice mediate the replacement of chalcogen atoms and facilitate the synthesis of MoS2 xSe2(1- x) alloys. Our DFT calculations suggest that S atoms can bind to Se vacancies and then diffuse throughout the host MoSe2 lattice via exchanging the position with Se vacancies, further supporting our proposed defect-mediated alloying mechanism. Beside native vacancy defects, we show that the existence of large-scale defects in CVD-grown MoSe2 films causes the fracture of alloys under the alloying-induced strain, while no such effect is observed in exfoliated MoSe2 films. Our study provides a deep insight into the details of the alloying mechanism and enables the synthesis of 2D alloys with tunable properties.

Highly-uniform resonator-based visible spectrometer on a Si3N4 platform with robust and accurate post-fabrication trimming.

A resonator array-based spectrometer for visible/near-infrared (NIR) wavelengths is fabricated on a low-loss silicon nitride (Si3N4) material platform. Ideally, a spectrometer should uniformly sample the input spectrum. However, resonator-based spectrometers, in which each spectral sample corresponds to resonance wavelength of one of the resonators in the array, suffer from wavelength sampling non-uniformity caused by the high sensitivity of the resonant wavelengths of different resonators to the dimensional variations caused by fabrication imperfections. Using an alignment-insensitive post-fabrication trimming technique, we reduce the standard deviation (STD) of resonance wavelength of a 60-channel integrated photonic spectrometer in Si3N4 to a record-low value of 5 pm in the visible wavelength range. This approach can be used to realize wideband and uniform visible spectrometers that are desirable for applications such as optical signal processing and biological sensing.

Compact Shielding of Graphene Monolayer Leads to Extraordinary SERS-Active Substrate with Large-Area Uniformity and Long-Term Stability.

Surface-enhanced Raman scattering (SERS) can significantly boost the inherently weak Raman scattering signal and provide detailed structural information and binding nature of the molecules on the surface. Despite the long history of this technology, SERS has yet to become a sophisticated analytical tool in practical applications. A major obstacle is the absence of high-quality and stable SERS-active substrate. In this work, we report a monolayer graphene-shielded periodic metallic nanostructure as large-area uniform and long-term stable SERS substrate. The monolayer graphene acting as a corrosion barrier, not only greatly enhanced stability, but also endowed many new features to the substrate, such as alleviating the photo-induced damages and improving the detection sensitivity for certain analytes that are weakly adsorbed on the conventional metallic substrates. Besides, our fabrication strategy were also capable of fabricating the reproducible SERS sensing spots array, which may serve as a promising high-throughput or multi-analyte sensing platform. Taken together, the graphene-shielded SERS substrate holds great promise both in fundamental studies of the SERS effect and many practical fields.

Role of PAR2 in regulating oxaliplatin-induced neuropathic pain via TRPA1.

Oxaliplatin (OXL) is a third-generation chemotherapeutic agent commonly used to treat metastatic digestive tumors; however, one of the main limiting complications of OXL is neuropathic pain. In this study, the underlying mechanisms responsible for OXL evoked-neuropathic pain were examined. Using a rat model, the results demonstrated that intraperitoneal (i.p.) injection of OXL significantly increased mechanical pain and cold sensitivity as compared with control animals (P < 0.05 vs. control rats). Blocking proteinase-activated receptor 2 (PAR2) significantly attenuated mechanical pain and cold sensitivity observed in control rats and OXL rats (P < 0.05 vs. vehicle control). The attenuating effect of PAR2 on mechanical pain and cold sensitivity were significantly smaller in OXL-rats than in control rats. The role played by PAR2 downstream signaling pathways [namely, transient receptor potential ankyrin 1 (TRPA1)] in regulating OXL evoked-neuropathic pain was also examined. The data shows that TRPA1 expression was upregulated in the lumbar dorsal root ganglion (DRG) of OXL rats and blocking TRPA1 inhibited mechanical pain and heightened cold sensitivity (P < 0.05 vs. control rats). Blocking PAR2 also significantly decreased TRPA1 expression in the DRG. Findings in this study show that OXL intervention amplifies mechanical hyperalgesia and cold hypersensitivity and PAR2 plays an important role in regulating OXL-induced neuropathic pain via TRPA1 pathways.