Quaternized chitosan/polyvinyl alcohol anion exchange membrane enhanced by functionalized attapulgite clay with an ionic "chain-ball" surface structure.

Biomass chitosan has garnered considerable interest for alkaline anion exchange membranes (AEMs) due to its eco-friendly and sustainable characteristics, low reactant permeability and easily modifiable nature, but it still faces the trade-off between high hydroxide conductivity and sufficient mechanical properties. Herein, a novel functionalized attapulgite clay (f-ATP) with a unique ionic "chain-ball" surface structure was prepared and incorporated with quaternized chitosan (QCS)/polyvinyl alcohol (PVA) matrix to fabricate high-performance composite AEMs. Due to the strengthened interfacial bonding between f-ATP nanofillers and the QCS/PVA matrix, composite membranes are synergistically reinforced and toughened, achieving peak tensile strength and elongation at break of 24.62 MPa and 33.8 %. Meanwhile, abundant ion pairs on f-ATP surface facilitate ion transport in the composite AEMs, with the maximum OH- conductivity of 46 mS cm-1 at 80 °C and the highest residual IEC of 83 % after alkaline treatment for 120 h. Moreover, the assembled alkaline direct methanol fuel cell exhibits a remarkable power density of 49.3 mW cm-2 at 80 °C. This work provides a new strategy for fabricating high-performance anion exchange membranes.

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles.

Currently, achieving a simultaneous improvement in proton conductivity and mechanical properties is a key challenge in using chitosan (CS) as a proton exchange membrane (PEM) substrate in direct methanol fuel cells (DMFCs). Herein, a novel nanofiller-zwitterionic molecule, (3-(3-aminopropyl) dimethylammonio) propane-1-sulfonate, ADPS)-modified polydopamine (PDA) (PDA-ADPS) was synthesized by the Michael addition reaction and was incorporated into a CS matrix to prepare CS/PDA-ADPS composite membranes. PDA-ADPS, which contains an acid-based ion pair can create new proton conduction channels in the composite membrane, improving proton conductivity. The proton conductivity of the CS/PDA-ADPS composite membrane was as high as 38.4 mS cm-1 at 80 °C. Moreover, due to the excellent compatibility and dispersibility of PDA-ADPS in the CS matrix, the obtained CS/PDA-ADPS composite membranes exhibited favorable mechanical properties. Such outstanding proton conductivity and mechanical properties guarantee good performance of the composite membranes in fuel cells. The peak power density of the CS/PDA-ADPS composite membranes was 30.2 mW cm-2 at 70 °C. This work provides a new strategy for fabricating high-performance CS based PEMs for DMFCs.