Study on the poroelastic behaviors of the defected osteochondral unit.

Osteoarthritis has become a major disease threatening human health. The mechanism of injury under fluid involvement can be studied by finite element method. However, most models only model the articular cartilage to study the subchondral bone structure, which is too simplistic. In this study, a complete osteochondral unit was modeled and provided with a poroelastic material, and as osteoarthritis develops and the size, thickness, and shape of the osteochondral unit defect varies, the fluid flow behavior is altered, which may have functional consequences that feed back into the progression of the injury. The results of the study showed that interstitial fluid pressure and velocity decreased in defective osteochondral units. This trend was exacerbated as the size and thickness of the defect in the osteochondral unit increased. When the defect reached the trabeculae, pressure around the cartilage defect in the osteochondral unit was greatest, flow velocity in the subchondral cortical bone was greatest, and pressure and flow velocity around the trabecular defect were lowest. As osteoarthritis develops, the osteochondral unit becomes more permeable, and the pressure of the interstitial fluid decreases while the flow rate increases, resulting in severe nutrient loss. This may be the fluid flow mechanism behind osteochondral defects and osteoarthritis.

Biomechanical evaluation and optimal design of a pedicle screw with double bent rods internal fixation system based on PE-PLIF fusion.

Problems, such as broken screws, broken rods, and cage subsidence after clinical spinal fusion surgery affect the success rate of fusion surgery and the fixation effect of fusion segments, and these problems still affect the treatment and postoperative recovery of patients. In this study, we used the biomechanical finite element analysis method to analyze and study the fixation effect of three kinds of spinal internal fixation systems on L4-L5 lumbar spine segments in percutaneous endoscopic posterior lumbar interbody fusion (PE-PLIF). The three different fixation systems compared in this study include bilateral pedicle screw fixation (M1); bilateral pedicle screw with cross-link fixation (M2); bilateral pedicle screws with double bent rods fixation (M3). The internal fixation systems with different structures were analyzed with the help of Hypermesh, and Abaqus. It was found that the internal fixation system with double bent rods reduced screw stresses by 23.8 and 22.2% in right and left axial rotation than the traditional bilateral pedicle screw system, while titanium rod stresses were reduced by 9.6, 3.7, 9.6, and 2.9% in flexion, left and right lateral bending, and right axial rotation, respectively, and L5 upper endplate stresses were reduced by 35.5, 18.9, 38.4, 10.2, and 48.3% in flexion, left and right lateral bending, and left and right axial rotation, respectively. The spinal range of motion (ROM) of the M3 internal fixation system was less than that of the M1 and M2 internal fixation systems in left lateral bending, left lateral rotation, and right axial rotation, and the intact vertebral ROM was reduced by 93.7, 94.9, and 90.9%, respectively. The double bent rod structure of the spinal internal fixation system has better biomechanical properties, which can effectively reduce the risk of screw breakage, loosening, cage subsidence, and endplate collapse after fusion surgery.

The biomechanical effects of different membrane layer structures and material constitutive modeling on patient-specific cerebral aneurysms.

The prevention, control and treatment of cerebral aneurysm (CA) has become a common concern of human society, and by simulating the biomechanical environment of CA using finite element analysis (FEA), the risk of aneurysm rupture can be predicted and evaluated. The target models of the current study are mainly idealized single-layer linear elastic cerebral aneurysm models, which do not take into account the effects of the vessel wall structure, material constitution, and structure of the real CA model on the mechanical parameters. This study proposes a reconstruction method for patient-specific trilaminar CA structural modeling. Using two-way fluid-structure interaction (FSI), we comparatively analyzed the effects of the differences between linear and hyperelastic materials and three-layer and single-layer membrane structures on various hemodynamic parameters of the CA model. It was found that the numerical effects of the different CA membrane structures and material constitution on the stresses and wall deformations were obvious, but does not affect the change in its distribution pattern and had little effect on the blood flow patterns. For the same material constitution, the stress of the three-layer membrane structure were more than 10.1% larger than that of the single-layer membrane structure. For the same membrane structure, the stress of the hyperelastic material were more than 5.4% larger than that of the linear elastic material, and the displacement of the hyperelastic material is smaller than that of the linear elastic material by about 20%. And the maximum value of stress occurred in the media, and the maximum displacement occurred in the intima. In addition, the upper region of the tumor is the maximum rupture risk region for CA, and the neck of the tumor and the bifurcation of the artery are also the sub-rupture risk regions to focus on. This study can provide data support for the selection of model materials for CA simulation and analysis, as well as a theoretical basis for clinical studies and subsequent research methods.