[Adsorption of Cr(â ¥) in Water by Maifanite Modified with Different LDHs Coatings].

Under alkaline conditions, the hydrothermal coprecipitation method was used to form different layered double hydroxides (LDHs) by combining different bivalent and trivalent metal compounds, such as ZnCl2, MgCl2, AlCl3, and FeCl3, and then LDHs were coated on the surface of the original maifanite. The effect of LDHs coating-modified maifanite on the improvement of Cr(Ⅵ) adsorption in water was studied using isothermal adsorption, desorption, non-isothermal adsorption, adsorption kinetics, pH, and competitive adsorption tests, respectively. The results show that the maximum theoretical adsorption capacity of modified maifanite for Cr(Ⅵ) is close to ten times that of original maifanite at 15℃. The adsorption effect of ZnAl-LDHs coating-loaded modified maifanite is better than that of other LDHs-coating modified maifanites. In contrast, the results of the desorption experiments show that maifanite coated with LDHs enhances the reuse of substrates. The thermodynamic parameters of the substrate for Cr(Ⅵ) adsorption in the experiment were △Gθ < 0, △Hθ < 0, △Sθ > 0, indicating that the substrate adsorption process of Cr(Ⅵ) is spontaneous and exothermic. Based on the adsorption kinetics study, the adsorption process of Cr(Ⅵ) by maifanite could be fitted using a pseudo-secondary reaction process. The adsorption type was mainly chemisorption. By selecting the suitable metal ion combination method to prepare different LDHs-coating modified maifanites, the Cr(Ⅵ) performance can effectively be improved.

[Influencing Factors for Phosphorus Removal by Modified Bio-ceramic Substrates Coated with ZnAl-LDHs Synthesized by Different Modification Conditions].

Under different pH conditions, the hydrothermal and co-precipitation method was used to synthesize layered double hydroxides (LDHs) coated on bio-ceramic substrates with three different Zn2+/Al3+ molar ratios. Applying the original and six kinds of modified bio-ceramic substrates coated with ZnAl-LDHs (bio-ceramic/ZnAl-LDHs) in simulated vertical-flow constructed wetlands, experiments for phosphorus removal and isothermal adsorption were conducted to analyze the mechanism and effect of each synthesis factor. The results showed that ZnAl-LDHs (pH=11) had a more obvious effect on phosphorus removal, especially for bio-ceramic/ZnAl-LDHs (pH=11, 1:1), whose average removal rates of TP, TDP and SRP were enhanced over 70%. Its maximum adsorption capacity for phosphorus was three times higher than that of the original bio-ceramic. Both pH and Zn2+/Al3+ molar ratio affected the configuration and coating properties of bio-ceramic/ZnAl-LDHs at the time of synthesis, and pH was the main synthesis factor for phosphorus removal efficiency of bio-ceramic/ZnAl-LDHs. Through reasonable regulation of pH and Zn2+/Al3+ molar ratio when bio-ceramic/ZnAl-LDHs was synthesized, the phosphorus removal efficiency could be improved effectively.