Reaction Environment Regulation for Electrocatalytic CO2 Reduction in Acids.

The electrocatalytic CO2 reduction reaction (CO2RR) is a sustainable route for converting CO2 into value-added fuels and feedstocks, advancing a carbon-neutral economy. The electrolyte critically influences CO2 utilization, reaction rate and product selectivity. While typically conducted in neutral/alkaline aqueous electrolytes, the CO2RR faces challenges due to (bi)carbonate formation and its crossover to the anolyte, reducing efficiency and stability. Acidic media offer promise by suppressing these processes, but the low Faradaic efficiency, especially for multicarbon (C2+) products, and poor electrocatalyst stability persist. The effective regulation of the reaction environment at the cathode is essential to favor the CO2RR over the competitive hydrogen evolution reaction (HER) and improve long-term stability. This review examines progress in the acidic CO2RR, focusing on reaction environment regulation strategies such as electrocatalyst design, electrode modification and electrolyte engineering to promote the CO2RR. Insights into the reaction mechanisms via in situ/operando techniques and theoretical calculations are discussed, along with critical challenges and future directions in acidic CO2RR technology, offering guidance for developing practical systems for the carbon-neutral community.

The potential for reducing aflatoxin B1 contamination of stored peanuts by soil disinfection.

Aflatoxins from the fungus Aspergillus flavus (A. flavus) that contaminate stored peanuts is a major hazard to human health worldwide. Reducing A. flavus in soil can decrease the risk of aflatoxins in stored peanuts. In this experiment, we determined whether peanuts grown on soil fumigated with dazomet (DZ), metham sodium (MS), allyl isothiocyanate (AITC), chloropicrin (PIC) or dimethyl disulfide (DMDS) would reduce of the quantity of A. flavus and its toxin's presence. The results of bioassays and field tests showed that PIC was the most effective fumigant for preventing and controlling A. flavus, followed by MS. PIC and MS applied to the soil for 14 d resulted in LD50 values against A. flavus of 3.558 and 4.893 mg kg-1, respectively, leading to almost 100% and 98.82% effectiveness of A. flavus, respectively. Peanuts harvested from fumigated soil and then stored for 60 d resulted in undetectable levels of aflatoxin B1 (AFB1) compared to unfumigated soil that contained 0.64 ug kg-1 of AFB1, which suggested that soil fumigation can reduce the probability of aflatoxin contamination during peanut storage and showed the potential to increase the safety of peanuts consumed by humans. Further research is planned to determine the practical value of our research in commercial practice.

Encapsulated allyl isothiocyanate improves soil distribution, efficacy against soil-borne pathogens and tomato yield.

BACKGROUND: Crop quality, yield and farmer income are reduced by soil-borne diseases, nematodes and weeds, although these can be controlled by allyl isothiocyanate (AITC), a plant-derived soil fumigant. However, its efficacy against soil-borne pathogens varies, mainly because of its chemical instability and uneven distribution in the soil. Formulation modification is an effective way to optimize pesticide application. We encapsulated AITC in modified diatomite granules (GR) and measured the formulation's loading content and stability, environmental fate and efficacy against soil-borne pathogens, and its impact on the growth and yield of tomatoes. RESULTS: We observed that an AITC loading content in the granules of 27.6% resulted in a degradation half-life of GR that was 1.94 times longer than 20% AITC emulsifiable concentrate in water (EW) and shorter than AITC technical (TC) grade. The stable and more even distribution of GR in soil resulted in relatively consistent and acceptable control of soil-borne pathogens. Soil containing AITC residues that remained 10-24 days after GR fumigation were not phytotoxic to cucumber seeds. GR significantly reduced soil-borne pest populations, and tomato growth and yield increased as AITC dosage increased. GR containing an AITC dose of 20 g m-2 effectively controlled pathogens in soil for about 7 months and improved tomato yield by 108%. CONCLUSION: Our research demonstrates the benefits of soil fumigation with loaded AITC over other formulations for effective pest control, and improved tomato plant growth and fruit yield. Fumigant encapsulation appears to be a useful method to improve pest and disease control, environmental performance and fumigant commercial sustainability. © 2024 Society of Chemical Industry.

Fumigation alters the manganese-oxidizing microbial communities to enhance soil manganese availability and increase tomato yield.

Manganese is one of the essential trace elements for plants to maintain normal life activities. Soil fumigation, while effectively controlling soil-borne diseases, can also improve the cycling of soil nutrient elements. MiSeq amplicon sequencing is used to determine the composition of soil microbial communities, and structural equation modeling and the random forest algorithm are employed to conduct a correlation analysis between key manganese-oxidizing microorganisms and soil manganese availability. This experiment investigated the microbial mechanisms behind the observed increase in available manganese in soil after fumigation. The key findings revealed that Bacillus, GeoBacillus, GraciliBacillus, Chungangia, and Pseudoxanthomonas play crucial roles in influencing the variation in soil available manganese content. Fumigation was found to elevate the abundance of Bacillus. Moreover, laccase activity emerged as another significant factor impacting soil manganese availability, showing an indirect correlation with available manganese content and contributing to 58 % of the observed variation in available manganese content. In summary, alterations in the communities of manganese-oxidizing microorganisms following soil fumigation are pivotal for enhancing soil manganese availability.

Low-coordination Nanocrystalline Copper-based Catalysts through Theory-guided Electrochemical Restructuring for Selective CO2 Reduction to Ethylene.

Revealing the dynamic reconstruction process and tailoring advanced copper (Cu) catalysts is of paramount significance for promoting the conversion of CO2 into ethylene (C2H4), paving the way for carbon neutralization and facilitating renewable energy storage. In this study, we initially employed density functional theory (DFT) and molecular dynamics (MD) simulations to elucidate the restructuring behavior of a catalyst under electrochemical conditions and delineated its restructuring patterns. Leveraging insights into this restructuring behavior, we devised an efficient, low-coordination copper-based catalyst. The resulting synthesized catalyst demonstrated an impressive Faradaic efficiency (FE) exceeding 70 % for ethylene generation at a current density of 800 mA cm-2. Furthermore, it showed robust stability, maintaining consistent performance for 230 hours at a cell voltage of 3.5 V in a full-cell system. Our research not only deepens the understanding of the active sites involved in designing efficient carbon dioxide reduction reaction (CO2RR) catalysts but also advances CO2 electrolysis technologies for industrial application.

Durable CO2 conversion in the proton-exchange membrane system.

Electrolysis that reduces carbon dioxide (CO2) to useful chemicals can, in principle, contribute to a more sustainable and carbon-neutral future1-6. However, it remains challenging to develop this into a robust process because efficient conversion typically requires alkaline conditions in which CO2 precipitates as carbonate, and this limits carbon utilization and the stability of the system7-12. Strategies such as physical washing, pulsed operation and the use of dipolar membranes can partially alleviate these problems but do not fully resolve them11,13-15. CO2 electrolysis in acid electrolyte, where carbonate does not form, has therefore been explored as an ultimately more workable solution16-18. Herein we develop a proton-exchange membrane system that reduces CO2 to formic acid at a catalyst that is derived from waste lead-acid batteries and in which a lattice carbon activation mechanism contributes. When coupling CO2 reduction with hydrogen oxidation, formic acid is produced with over 93% Faradaic efficiency. The system is compatible with start-up/shut-down processes, achieves nearly 91% single-pass conversion efficiency for CO2 at a current density of 600 mA cm-2 and cell voltage of 2.2 V and is shown to operate continuously for more than 5,200 h. We expect that this exceptional performance, enabled by the use of a robust and efficient catalyst, stable three-phase interface and durable membrane, will help advance the development of carbon-neutral technologies.

Systematic assessment of the antifungal mechanism of soil fumigant methyl isothiocyanate against Fusarium oxysporum.

Fusarium oxysporum is an important phytopathogenic fungus, it can be controlled by the soil fumigant methyl isothiocyanate (MITC). However, the antimicrobial mechanism of MITC against F. oxysporum, especially at the transcriptional level, is still unclear. In this experiment, the antimicrobial mechanism of MITC against F. oxysporum was investigated. Our results indicated that when F. oxysporum was exposed to 6 mg/L MITC for 12 h, the inhibitory rate of MITC on F. oxysporum was 80%. Transmission electron microscopes showed that the cell wall and membrane of F. oxysporum had shrunk and folded, vacuoles increased, and mitochondria swelled and deformed. In addition, the enzyme activity of F. oxysporum treated with MITC showed a decrease of 32.50%, 8.28% and 74.04% in catalase, peroxidase and superoxide dismutase, respectively. Transcriptome sequencing of F. oxysporum was performed and the results showed that 1478 differentially expressed genes (DEGs) were produced in response to MITC exposure. GO and KEGG analysis showed that the DEGs identified were involved in substance and energy metabolism, signal transduction, transport and catalysis. MITC disrupted cell homeostasis by influencing the expression of some key genes involved in chitin synthase and detoxification enzymes production, but F. oxysporum also protected itself by up-regulating genes involved in energy synthesis (such as upregulating acnA, CS and LSC2 in TCA). qRT-PCR data validated the reliability of transcriptome data. Our research used biochemical and genetic techniques to identify molecular lesions in the mycelia of F. oxysporum exposed to MITC, and provide valuable insights into the toxic mechanism of pathogenic fungi mediated by MITC. These techniques are also likely to be useful for rapidly screening and identifying new, environmentally-friendly soil fumigants that are efficacious against fungal pathogens.

Transcriptome reveals the toxicity difference of dimethyl disulfide by contact and fumigation on Meloidogyne incognita through calcium channel-mediated oxidative phosphorylation.

The prevention and control of root-knot nematode disease has been posing a severe challenge worldwide. Fumigant dimethyl disulfide (DMDS) has excellent biological activity against nematodes. However, DMDS displays significant differences in contact and fumigation toxicity on nematodes. The specific regulatory mechanisms of DMDS on nematodes were investigated by characterizing the ultrastructure of nematodes, examining the physiological and biochemical indicators, and conducting transcriptome high-throughput sequencing. As indicated by the results, DMDS fumigation exhibited the biological activity of against M. incognita 121 times higher than DMDS contact. DMDS contact destroyed nematode body wall cells. Besides, DMDS fumigation destroyed the structure of pseudocoelom. DMDS treatment expedited the oxygen consumption of nematode while inhibiting acetylcholinesterase activity. As indicated by the analysis of vital signaling pathways based on transcriptome, DMDS based on the contact mode penetrated directly into the nematode through the body wall and subsequently affected calcium channels in the body wall and muscle, disrupting their structure; it serves as an uncoupling agent to interfere with ATP synthase. Moreover, DMDS based on the fumigation mode entered the body through the respiratory pathway of olfactory perception-oxygen exchange and subsequently affected calcium channels in the nerve; eventually, DMDS acted on complex IV or complex I.

Advanced Catalyst Design and Reactor Configuration Upgrade in Electrochemical Carbon Dioxide Conversion.

Electrochemical carbon dioxide reduction reaction (CO2 RR) driven by renewable energy shows great promise in mitigating and potentially reversing the devastating effects of anthropogenic climate change and environmental degradation. The simultaneous synthesis of energy-dense chemicals can meet global energy demand while decoupling emissions from economic growth. However, the development of CO2 RR technology faces challenges in catalyst discovery and device optimization that hinder their industrial implementation. In this contribution, a comprehensive overview of the current state of CO2 RR research is provided, starting with the background and motivation for this technology, followed by the fundamentals and evaluated metrics. Then the underlying design principles of electrocatalysts are discussed, emphasizing their structure-performance correlations and advanced electrochemical assembly cells that can increase CO2 RR selectivity and throughput. Finally, the review looks to the future and identifies opportunities for innovation in mechanism discovery, material screening strategies, and device assemblies to move toward a carbon-neutral society.

Effects of soil factors on dimethyl disulfide desorption and the risk of phytotoxicity to newly-planted seedlings.

Dimethyl disulfide (DMDS) is a relatively new soil fumigant used in agro-industrial crop production to control soil-borne pests that damage crops and reduce yield. The emissions of DMDS after fumigation reduce soil concentrations thus reducing the risk of phytotoxicity to newly planted crops. However, the factors affecting the desorption of DMDS from soil are unclear. In our study, the desorption characteristics of DMDS from soil were measured in response to continuous ventilation. The degradation of DMDS in soil was examined by thermal incubation. The phytotoxic response of newly-planted cucumber (Cucumis sativus) seedlings to DMDS residues was measured by a sand culture experiment. The results showed DMDS desorption and degradation rates fit a first-order model; that 92% of the DMDS desorption occurred in the first hour after fumigant application; and that residue concentrations in the soil at the end of the ventilation period were unlikely to be phytotoxic to newly-planted cucumber seedlings. By the third day of ventilation, the average desorption rate (ADR) of DMDS in Wenshan soil was 4.0 and 3.6 times, respectively, faster than that in Shunyi and Suihua soils and the ADR of DMDS in soil decreased by 40.0% when the soil moisture content increased from 3% to 12% (wt/wt). Moreover, within one hour of ventilation, the ADR of DMDS in soil decreased by 20.1% when the soil bulk density increased from 1.1 to 1.3 g cm-3. The degradation of DMDS in soil, however, was mostly influenced by soil type and moisture content. A slow degradation rate resulted in a high initial desorption concentration of DMDS in soil. Our results indicated that DMDS desorption from soil in response to continuous ventilation was affected by the soil type, moisture content and bulk density. Rapid degradation of DMDS in soil will lower the risk of phytotoxic residues remaining in the soil and reduce emissions during the waiting period. Acceleration of emissions early in the waiting period by managing soil moisture content or increasing soil porosity may shorten the duration of emissions. Alternatively, soil extraction technology could be developed to recover and reduce fumigant emissions.

Long-term effects of chloropicrin fumigation on soil microbe recovery and growth promotion of Panax notoginseng.

Introduction: Panax notoginseng is a precious Chinese medicinal material. Soil fumigation can control soil-borne disease and overcome the continuous cropping obstacles of P. notoginseng. However, chloropicrin (CP) fumigation can kill non-target soil microorganisms and reduce microbial diversity, but the long-time impacts of CP fumigation on soil microbial are less reported. Methods: We studied the long-term effects of CP fumigation on soil microbes with high-throughput gene sequencing, and correlated the changes in the composition of microbial communities with environmental factors like soil physicochemical properties and soil enzyme activities. This study mainly focuses on the recovery characteristics of soil microbe after soil fumigation by evaluating the ecological restoration of P. notoginseng soil, its sustained control effect on plant diseases, and its promotion effect on crop growth by focusing on the CP fumigation treatment. Results: The results showed that CP fumigation significantly increased soil available phosphorus (P) to 34.6 ~ 101.6 mg/kg and electrical conductivity (EC) by 18.7% ~ 34.1%, respectively. High-throughput gene sequencing showed that soil fumigation with CP altered the relative abundance of Trichoderma, Chaetomium, Proteobacteria, and Chloroflexi in the soil while inhibiting a lot of Fusarium and Phytophthora. The inhibition rate of Phytophthora spp. was still 75.0% in the third year after fumigation. Fumigation with CP enhanced P. notoginseng's survival rate and stimulated plant growth, ensuring P. notoginseng's healthy in the growth period. The impact of fumigation on microbial community assembly and changes in microbial ecological niches were characterized using normalized stochasticity ratio (NST) and Levins' niche breadth index. Stochasticity dominated bacterial community assembly, while the fungal community was initially dominated by stochasticity and later by determinism. Fumigation with CP reduced the ecological niches of both fungi and bacteria. Conclusion: In summary, the decrease in microbial diversity and niche caused by CP fumigation could be recovered over time, and the control of soil pathogens by CP fumigation remained sustainable. Moreover, CP fumigation could overcome continuous cropping obstacles of P. notoginseng and promote the healthy growth of P. notoginseng.

Mechanisms by which chloropicrin fumigation promotes soil potassium conversion and absorption.

Fumigation of soil using chloropicrin has been proven to significantly affect soil nutrient cycling, but the mechanism by which soil potassium conversion and plant uptake is promoted remains unclear. In this study, we conducted a fumigation experiment to investigate the effects of chloropicrin soil fumigation on the conversion of soil potassium post-fumigation (days 7-70), and its mechanisms, tomatos were planted in fumigated and non-fumigated soils to enable further comparisons. Results showed that the content of rapidly available potassium and available potassium decreased by 16-24% and 17-23% at day 28 respectively, when tomato was planted in chloropicrin-fumigated soils compared to the non-fumigated soils. The potassium content of tomato planted in fumigated soil was significantly higher than that planted in non-fumigated soil (30.3 vs. 21.9 mg g-1 dry weight). Chloropicrin fumigation resulted in a significant change in the soil bacterial and fungal community structures, and trigged a long-term (at least 70-day) decrease in microbial diversity. Network analysis showed that chloropicrin soil fumigation changed microbial co-occurrence patterns by decreasing bacterial total links, nodes, and average degree, and increasing fungal total links, nodes, and average degree. Chloropicrin fumigation caused significant changes in the relative abundance of Bacillus species, which are involved in potassium dissolution. Structural equation model (SEM) suggested that fumigation with chloropicrin enhanced the contribution of soil potassium to tomato growth and reduced the contribution of bacterial communities. Together, the results of our study help in understanding the crop yield enhancement mechanism of soil fumigation.

Silica modified copper-based alginate/chitosan hybrid hydrogel to control soil fumigant release, reduce emission and enhance bioactivity.

Soil fumigant has been extensively used for excellent efficacy on soil-borne diseases. However, rapid emission and insufficient effective duration typically limit its application. In this study, hybrid silica/polysaccharide hydrogel was proposed (SIL/Cu/DMDS) by emulsion-gelation method to encapsulate dimethyl disulfide (DMDS). The orthogonal study was used to optimize the preparation parameters for LC and EE of SIL/Cu/DMDS, which was 10.39 % and 71.05 %, respectively. Compared with silica, the time for 90 % of the total emissions was extended by 4.36 times. The hydrogel possessed a longer persistent duration and the degradation half-life of DMDS was 3.47 times greater than that of silica alone. Moreover, the electrostatic interaction between abundant groups of polysaccharide hydrogel bestowed DMDS with pH-triggered release behavior. Additionally, SIL/Cu/DMDS had excellent water holding and water retention capacity. The bioactivity of the hydrogel was 58.1 % higher than that of DMDS TC due to the strong synergistic effect between DMDS and the carriers (chitosan and Cu2+), and showed obvious biosafety to cucumber seeds. This study seeks to provide a potential approach to develop hybrid polysaccharide hydrogel to control soil fumigants release, reduce emission and enhance bioactivity in plant protection.

Comparison of drip-irrigated or injected allyl isothiocyanate against key soil-borne pathogens and weeds.

BACKGROUND: Allyl isothiocyanate (AITC) is a soil biofumigant used for controlling soil-borne pests that reduce the growth, quality, and yield of food crops. Its effectiveness against pathogens depends largely on its distribution in the soil, which is influenced mainly by the soil water content and application method. The distributions of AITC when injected with different moisture content or drip-irrigated into soils were compared. RESULTS: AITC injected at 50 g m-2 only diffused 10 cm deep in soil column with 5, 10 or 15% soil moisture content. The gas AITC peak concentration was 0.64 µg cm-3 at 5% moisture content. Diffusion was reduced when moisture content increased to more than 15%. The results of adsorption kinetics and release indicated that AITC's limited distribution was due to its low vapor pressure. AITC applied by drip irrigation at 7.5 g m-2 diffused 15 cm laterally and 30 cm deep where it reached concentrations of 0.022 µg cm-3 and 0.035 µg g-1 , respectively. Some soil-borne pathogens, nematodes and weed seeds closed to the point of AITC release were effectively controlled under drip irrigation, but efficacy decreased with increased distance. AITC applied by drip irrigation at 7.5 g m-2 and covered with PE film for 5 days provided a satisfactory efficacy against soil-borne pathogens and weeds without any phytotoxicity. CONCLUSION: Our results indicated that AITC applied by drip irrigation was more effective than injection, which will guide applicators on methods to optimize the application of AITC for efficient control of key pests and weeds. © 2023 Society of Chemical Industry.

Evaluation of ethylicin as a potential soil fumigant in commercial tomato production in China.

Recent increases in soil-borne plant disease have limited further expansion of some crops produced in protected agriculture. Soil fumigation effectively minimizes the impact of soil pathogens causing many diseases. We provide the first report of the efficacy of the Chinese fungicide ethylicin as a soil fumigant against the plant pathogens such as Fusarium spp. and Phytophthora spp., and against the plant parasitic nematode Meloidogyne spp. We also examined ethylicin's impact on the physicochemical properties of soil, the soil's bacterial and fungal taxonomic composition, the plant growth of tomatoes, the enzyme activity of soil and tomato yield. Ethylicin fumigation significantly decreased the abundance of Fusarium spp. and Phytophthora spp. by 67.7 %-84.0 % and 53.8 %-81.0 %, respectively. It reduced Meloidogyne spp. by 67.2 %-83.6 %. Ethylicin significantly increased the growth of tomato plants and tomato yield by 18.3 %-42.0 %. The soil's ammonium­nitrogen concentration increased significantly in answer to ethylicin fumigation, while nitrate­nitrogen concentration and the activity of soil urease decreased significantly. High-throughput gene sequencing had been used to show that ethylicin cut down the taxonomic soil bacteria diversity and bacterial abundance, but increased the soil fungi taxonomic diversity. Some genera of microorganisms increased, such as Firmicutes, Steroidobacter and Chytridiomycota, possibly due to changes in the physicochemical properties of soil that differentially favored their survival. We conclude that ethylicin is efficacious as a soil fumigant and it would be a useful addition to the limited number of soil fumigants currently available.

Molecular Methods for Identification and Quantification of Foodborne Pathogens.

Foodborne pathogens that enter the human food chain are a significant threat worldwide to human health. Timely and cost-effective detection of them became challenging for many countries that want to improve their detection and control of foodborne illness. We summarize simple, rapid, specific, and highly effective molecular technology that is used to detect and identify foodborne pathogens, including polymerase chain reaction, isothermal amplification, loop-mediated isothermal amplification, nucleic acid sequence-based amplification, as well as gene chip and gene probe technology. The principles of their operation, the research supporting their application, and the advantages and disadvantages of each technology are summarized.

Taxonomic response of bacterial and fungal populations to biofertilizers applied to soil or substrate in greenhouse-grown cucumber.

Reductions in the quality and yield of crops continuously produced in the same location for many years due to annual increases in soil-borne pathogens. Environmentally-friendly methods are needed to produce vegetables sustainably and cost effectively under protective cover. We investigated the impact of biofertilizers on cucumber growth and yield, and changes to populations of soil microorganisms in response to biofertilizer treatments applied to substrate or soil. We observed that some biofertilizers significantly increased cucumber growth and decreased soil-borne pathogens in soil and substrate. Rhizosphere microbial communities in soil and substrate responded differently to different biofertilizers, which also led to significant differences in microbial diversity and taxonomic structure at different times in the growing season. Biofertilizers increase the prospects of re-using substrate for continuously producing high-quality crops cost-effectively from the same soil each year while at the same time controlling soil-borne disease.

First report in China of Fusarium humuli as a causative agent of Chinese yam wilt.

Wilt is one the most serious soil-born fungal diseases of Chinese yam (Dioscorea polystachya Turczaninow cv. Tiegun), affecting plant production in many growing regions in Jiangxi province, China. The average annual incidence of wilt is 45-80%. In 2020, affected plants with wilt symptoms including withered and dried leaves, vascular discoloration, and brown necrotic stem lesions at the soil line or in the crown of the plant (Figure 1A-D) were collected from the Ruichang, Yongfeng and Taihe production areas (four fields per location) in Jiangxi province. A total of fifteen isolates were recovered from the infected stem tissues of Chinese yam and purified by single spore cultures on PDA growth medium. The fifteen isolates were similar in morphology so isolate JXRC11 was selected to be representative of the group. Pure fungal colonies of JXRC11were found to be round, white, with margin entire (Figure 1E). Macroconidia with 3-5 septations were straight to slightly curved, 23.8-40.3 µm in length and 2.6-3.9 µm in width, with predominantly 5-septate macroconidia on carnation leaf agar (CLA) (Figure 1F). However, neither microconidia or chlamydospores were observed on CLA. The morphological characteristics of the isolate were consistent with the description observed previously for Fusarium humuli species complex (Wang et al. 2019). To confirm morphological identification, ITS, CAM, TEF-1α, RPB1 and RPB2 were amplified using the primers ITS5/ITS4 (White et al. 1990), CL1/CL2A (O'Donnell et al. 2000), EF1/EF2 (O'Donnell et al. 1998), Fa/G2R (O'Donnell et al. 2010), and 5f2/11ar (O'Donnell et al. 2010), respectively. BLASTn analysis of the ITS sequence (GenBank accession no. MZ768912), EF-1α (MZ824669), CAM (MZ824670), RPB1 (MZ824672) and RPB2 (MZ824673) alignment showed 99.55%, 99.68%, 99.85%, 97.61% and 99.76% identity to those of F. humuli CQ1039 (MK280845, MK289570, MK289712, MK289840 and MK289724), respectively. Multilocus phylogenetic analyses showed that the sequences of ITS, CAM, EF-1α, RPB1, and RPB2 of the isolate belonged to the incarnatum clade (FIESC-33) of the F. incarnatum-equiseti species complex with an independent branch (Figure 2). Pathogenicity tests were conducted on one-month-old Chinese yam seedlings using a seedling root dip method (Li et al. 2013). The roots and rhizomes of seedlings grown to two meters in height were dipped into spore suspensions (1×106 spores/mL) of isolate JXRC11 for 30 min and then transferred into 20 cm diameter plastic pots containing steam-sterilized soil and placed in a greenhouse under 12 h photoperiod. After 15 d, the inoculated seedlings showed typical wilt symptoms similar to those observed in farm fields, whereas the control remained unaffected (Figure 1G-H). The pathogen was then re-isolated from the infected plants, the re-isolations were identified as F. humuli by sequencing EF-1α, fulfilling the Koch's postulates. It has been reported that the pathogen F. oxysporum Schlecht causes Fusarium wilt in five species of Dioscorea (Nwankiti and Arene, 1978). Moreover, at least 5 species of Fusarium were identified as a causative agent of Chinese yam wilt (Fang et al. 2020). To our knowledge, this is the first report of Fusarium wilt disease on Chinese yam caused by a member of the F. humuli in Jiangxi, China. This report will contribute to developing management strategies to control the disease.