RESUMO
The polysulfide (PS) dissolution and low conductivity of lithium sulfides (Li2 S) are generally considered the main reasons for limiting the reversible capacity of the lithium-sulfur (Li-S) system. However, as the inevitable intermediate between PSs and Li2 S, lithium disulfide (Li2 S2 ) evolutions are always overlooked. Herein, Li2 S2 evolutions are monitored from the operando measurements on the pouch cell level. Results indicate that Li2 S2 undergoes slow electrochemical reduction and chemical disproportionation simultaneously during the discharging process, leading to further PS dissolution and Li2 S generation without capacity contribution. Compared with the fully oxidized Li2 S, Li2 S2 still residues at the end of the charging state. Therefore, instead of the considered Li2 S and PSs, slow electrochemical conversions and side chemical reactions of Li2 S2 are the determining factors in limiting the sulfur utilization, corresponding to the poor reversible capacity of Li-S batteries.
RESUMO
A strategy of lattice-reversible binary intermetallic compounds of metallic elements is proposed for applications in flexible lithium-ion battery (LIB) anode with high capacity and cycling stability. First, the use of metallic elements can ensure excellent electronic conductivity and high capacity of the active anode substance. Second, binary intermetallic compounds possess a larger initial lattice volume than metallic monomers, so that the problem of volume expansion can be alleviated. Finally, the design of binary intermetallic compounds with lattice reversibility further improves the cycle stability. In this work, the feasibility of this strategy is verified using an indium antimonide (InSb) system. The volumetric expansion and lithium storage mechanism of InSb are investigated by in situ Raman characterization and theoretical calculations. The active material utilization is significantly improved and the growth of In whiskers is inhibited in the micron-sized ball-milled and carbon coated InSb (bInSb@C) anode, which exhibits a reversible capacity of 733.8 mAh g-1 at 0.2 C, and provides a capacity of 411.5 mAh g-1 after 200 cycles at 3 C with an average Coulombic efficiency of 99.95%. This strategy is validated in pouch cells, illustrating the great potential of lattice-reversible binary intermetallic compounds for use as commercial flexible LIB anodes.
RESUMO
Cross-linked polyethylene glycol-based resin (c-PEGR) is constructed by a ring-opening reaction of polyethylene glycol diglycidyl ether (PEGDE) with epoxy groups and polyether amine (PEA) with amino groups. By confining the hydroxyl groups with inferior oxidative stability to the c-PEGR backbone, the oxidation potential of the PEG-based polymer material with reduced reactivity is boosted to 4.36 V. The c-PEGR based gel electrolyte shows excellent flexibility, lithium-ion transport, lithium compatibility, and enhanced oxidation stability, and is successfully applied to a 4.35 V lithium cobaltate (LCO)||lithium (Li) battery system. A quasi-static linear scanning voltammetry (QS-LSV) method is proposed for the first time to accurately measure the oxidation potential and electrochemical stability window of materials with low conductivities such as polymers, which possesses the advantages of high accuracy and short test time. This work provides new insights and research techniques for selecting polymer electrolytes for high-voltage flexible lithium-ion batteries (LIBs).
RESUMO
Super-aligned carbon nanotube (SACNT) films with wrinkled structures are prepared by a biaxial pre-strain method and can withstand repetitive stretching of large strains in multiple directions. Ultra-stretchable supercapacitors were fabricated with the SACNT film and active carbon (AC) powders. The initial specific capacitance without strain and with 150% strains in the X, Y and 45° axes was 91, 88, 89 and 90 F g-1, respectively. Moreover, the capacitance retentions were 97%, 98.5% and 98.6% after 2000 tensile cycles at 0-150% strain in the X, Y and 45° axes, respectively, demonstrating the excellent strain durability of the SACNT/AC supercapacitors. The stretchable circuit with the combination of stretchable SACNT/AC supercapacitors and SACNT conductors demonstrates a promising method in developing self-contained stretchable functional devices for a variety of applications. The low-cost and scalable biaxial pre-strain process presents a potential route for designing high performance stretchable electronic and energy storage devices.
