Degradation of Adsorbed Bisphenol A by Soluble Mn(III).

Bisphenol A (BPA), a high production volume chemical and potential endocrine disruptor, is found to be associated with sediments and soils due to its hydrophobicity (log KOW of 3.42). We used superfine powdered activated carbon (SPAC) with a particle size of 1.38 ± 0.03 µm as a BPA sorbent and assessed degradation of BPA by oxidized manganese (Mn) species. SPAC strongly sorbed BPA, and desorption required organic solvents. No degradation of adsorbed BPA (278.7 ± 0.6 mg BPA g-1 SPAC) was observed with synthetic, solid α-MnO2 with a particle size of 15.41 ± 1.35 µm; however, 89% mass reduction occurred following the addition of 0.5 mM soluble Mn(III). Small-angle neutron scattering data suggested that both adsorption and degradation of BPA occurred in SPAC pores. The findings demonstrate that Mn(III) mediates oxidative transformation of dissolved and adsorbed BPA, the latter observation challenging the paradigm that contaminant desorption and diffusion out of pore structures are required steps for degradation. Soluble Mn(III) is abundant near oxic-anoxic interfaces, and the observation that adsorbed BPA is susceptible to degradation has implications for predicting, and possibly managing, the fate and longevity of BPA in environmental systems.

Microbially-induced mineral scaling in desalination conditions: Mechanisms and effects of commercial antiscalants.

Reverse osmosis (RO) technology is promising in the sustainable production of fresh water. However, expansion of RO use has been hindered by membrane fouling, mainly inorganic fouling known as scaling. Although membrane mineral scaling by chemical means have been investigated extensively, mineral scaling triggered by microbial activity has been largely neglected. In this study, the simultaneous biomineralization of CaCO3 and CaSO4 in the presence of three different microbial communities from fresh water, wastewater, and seawater was investigated. In the presence of either 13 or 79 mM of Ca2+ and SO42- in the media, the fresh water microbial community produced calcite/vaterite and vaterite/gypsum, respectively; the wastewater community produced vaterite and vaterite/gypsum, respectively; and the seawater community produced aragonite in both conditions. The results showed that the concentration of salts and the microbial composition influence the types of precipitates produced. The mechanisms of crystal formation of CaCO3 and gypsum by these communities were also investigated by determining the need for metabolic active cells, the effect of a calcium channel blocker, and the presence of extracellular polymeric substances (EPS). The results showed that metabolically active cells can lead to production of EPS and formation of Ca2+ gradient along the cells through calcium channels, which will trigger formation of biominerals. The prevention of biomineralization by these consortia was also investigated with two common polymeric RO antiscalants, i.e. polyacrylic acid (PAA) and polymaleic acid (PMA). Results showed that these antiscalants do not prevent the formation of the bio-precipitates suggesting that novel approaches to prevent biomineralization in RO systems still needs to be investigated.

Recent advances in graphene-based biosensor technology with applications in life sciences.

Graphene's unique physical structure, as well as its chemical and electrical properties, make it ideal for use in sensor technologies. In the past years, novel sensing platforms have been proposed with pristine and modified graphene with nanoparticles and polymers. Several of these platforms were used to immobilize biomolecules, such as antibodies, DNA, and enzymes to create highly sensitive and selective biosensors. Strategies to attach these biomolecules onto the surface of graphene have been employed based on its chemical composition. These methods include covalent bonding, such as the coupling of the biomolecules via the 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-hydroxysuccinimide reactions, and physisorption. In the literature, several detection methods are employed; however, the most common is electrochemical. The main reason for researchers to use this detection approach is because this method is simple, rapid and presents good sensitivity. These biosensors can be particularly useful in life sciences and medicine since in clinical practice, biosensors with high sensitivity and specificity can significantly enhance patient care, early diagnosis of diseases and pathogen detection. In this review, we will present the research conducted with antibodies, DNA molecules and, enzymes to develop biosensors that use graphene and its derivatives as scaffolds to produce effective biosensors able to detect and identify a variety of diseases, pathogens, and biomolecules linked to diseases.