Valve-in-valve outcome: design impact of a pre-existing bioprosthesis on the hydrodynamics of an Edwards Sapien XT valve.

Objectives: Bioprosthetic aortic heart valves are increasingly implanted in younger patients. Therefore, a strategy for potential valve failure should be developed before implanting the 'first valve'. The goal of this in vitro study was to provide insight into the effects of the design of a bioprosthesis on a valve-in-valve implanted Sapien XT valve. Methods: The hydrodynamic performance of a 23-mm Sapien XT valve implanted in Vascutek Aspire, Edwards Perimount, Medtronic Mosaic and St. Jude Medical Trifecta heart valves was investigated in a left heart simulator. In addition to the hydrodynamic results, the leaflet dynamics were analysed in high-speed video recordings of the tests. Results: All valve-in-valve combinations in this study fulfilled the minimum acceptance criteria defined by relevant approval standards (e.g. ISO 5840) but displayed significant differences in their performances. Small inner diameters of the bioprostheses were associated with increased mean pressure gradients, decreased effective orifice areas and geometric opening areas as well as with pin-wheeling and uneven leaflet motion. In addition, implantation in bioprostheses with internally mounted leaflets was associated with lower paravalvular leakage. Conclusions: The results of this study suggest that a surgical bioprosthesis with a large inner diameter and internally mounted leaflets improves the heamodynamics and potentially the durability of a valve-in-valve combination. These results should give the attending physicians critical information to consider when deciding on a bioprosthesis for younger patients.

Micro and nanoparticle deposition in human nasal passage pre and post virtual maxillary sinus endoscopic surgery.

Realistic 3-D models of the human nasal passages were developed pre and post virtual uncinectomy and Middle Meatal Antrostomy. A 3-D computational domain was constructed by a series of coronal CT scan images from a healthy subject. Then a virtual uncinectomy intervention and maxillary antrostomy were performed on the left nasal passage by removing the uncinate process and exposing the maxillary sinus antrum. For several breathing rates corresponding to low or moderate activities, the airflows in the nasal passages were simulated numerically pre and post virtual routine maxillary sinus endoscopic surgery. The airflow distribution in the nasal airway, maxillary and frontal sinuses were analyzed and compared between pre and post surgery cases. A Lagrangian trajectory analysis approach was used for evaluating the path and deposition of microparticles in the nasal passages and maxillary sinuses. A diffusion model was used for nanoparticle transport and deposition analysis. The deposition rate of the inhaled micro and nanoparticles in the sinuses were evaluated and compared for pre and post operation conditions. The results showed that after maxillary sinus endoscopic surgery, the inhaled nano and microparticles can easily enter this sinus due to penetration of the airflow into the sinus cavity. This was in contrast to the preoperative condition in which almost no particles entered the sinuses. These results could be of importance for a better understanding of the effect of sinus endoscopic surgery on patient exposure to particulate pollution and inhalation drug delivery. The significantly higher airflow rate and particle deposition in the sinus could be a reason for the discomfort reported by some patient after maxillary sinus endoscopic surgery.

Numerical analysis of micro- and nano-particle deposition in a realistic human upper airway.

A computational model was developed for studying the flow field and particle deposition in a human upper airway system, including: nasal cavity, nasopharynx, oropharynx, larynx and trachea. A series of coronal CT scan images of a 24 year old woman was used to construct the 3D model. The Lagrangian and Eulerian approaches were used, respectively, to find the trajectories of micro-particles and concentration of nano-particles. The total and regional deposition fractions of micro/nanoparticles were evaluated and the major hot spots for the deposition of inhaled particles were found.