Dark State of the Thiele Hydrocarbon: Efficient Solvatochromic Emission from a Nonpolar Centrosymmetric Singlet Diradicaloid.

In this work, a comprehensive investigation of the photoinduced processes and mechanisms linked to the luminescence of a novel nonperchlorinated Thiele hydrocarbon (TTH) is presented. Despite the comparable diradical character of TTH (y0 = 0.32-0.44) and the unsubstituted Thiele hydrocarbon (TH) (y0 = 0.30), the polyhalogenated species is inert and photostable, showing an intense deep-red/near-infrared (NIR) fluorescence (photoluminescence quantum yield (PLQY) = 0.84 in toluene) even at room temperature and in the solid state (PLQY = 0.19). TTH displays a large Stokes shift (307 nm in benzonitrile) and solvatochromic behavior, which is unusual for a centrosymmetric, nonpolar, and low-conjugated species. These outstanding emission features are interpreted through quantum-chemical calculations, indicating that its fluorescence arises from the low-lying dark doubly excited zwitterionic state, typically found at low excitation energies in diradicaloids, acquiring dipole moment and intensity by state mixing via twisting around the strongly elongated exocyclic CC bonds of the excited p-quinodimethane (pQDM) core, with a mechanism similar to sudden polarization occurring in olefins. Such a mechanism is derived from ns and fs transient absorption measurements.

Raman, WAXS, and Solid-State NMR Characterizations of Regenerated Silk Fibroin Using Lanthanide Ions as Chaotropic Agents.

Bombyx mori silk fibroin (SF) has been reported as a convenient natural material for regenerative medicine, optoelectronics, and many other technological applications. SF owes its unique features to the hierarchical organization of the fibers. Many efforts have been made to set up protocols for dissolution since many applications of SF are based on regenerated solutions and fibers, but chaotropic conditions required to disassemble the packing of the polymer afford solutions with poor crystalline behavior. Our previous research has disclosed a dissolution and regeneration process of highly crystalline fibers involving lanthanide ions as chaotropic agents, demonstrating that each lanthanide has its own unique interaction with SF. Herein, we report elucidation of the structure of Ln-SF fibers by the combined use of Raman spectroscopy, wide-angle X-ray scattering (WAXS), and solid-state NMR techniques. Raman spectra confirmed the coordination of metal ions to SF, WAXS results highlighted the crystalline content of fibers, and solid-state NMR enabled the assessment of different ratios of secondary structures in the protein.

Chiral Diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole Dyes with Highly Tuneable Properties in Solution and Thin Films.

Invited for the cover of this issue are the research groups of Lorenzo Di Bari at the University of Pisa and Gianluca Maria Farinola at the University of Bari Aldo Moro. The image depicts three diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole dyes with the same chiral appendage R* but different achiral substituent groups Y showing profoundly different features in their aggregated form. Read the full text of the article at 10.1002/chem.202300291.

Supramolecular Biohybrid Construct for Photoconversion Based on a Bacterial Reaction Center Covalently Bound to Cytochrome c by an Organic Light Harvesting Bridge.

A supramolecular construct for solar energy conversion is developed by covalently bridging the reaction center (RC) from the photosynthetic bacterium Rhodobacter sphaeroides and cytochrome c (Cyt c) proteins with a tailored organic light harvesting antenna (hCy2). The RC-hCy2-Cyt c biohybrid mimics the working mechanism of biological assemblies located in the bacterial cell membrane to convert sunlight into metabolic energy. hCy2 collects visible light and transfers energy to the RC, increasing the rate of photocycle between a RC and Cyt c that are linked in such a way that enhances proximity without preventing protein mobility. The biohybrid obtained with average 1 RC/10 hCy2/1.5 Cyt c molar ratio features an almost doubled photoactivity versus the pristine RC upon illumination at 660 nm, and ∼10 times higher photocurrent versus an equimolar mixture of the unbound proteins. Our results represent an interesting insight into photoenzyme chemical manipulation, opening the way to new eco-sustainable systems for biophotovoltaics.

Chiral Diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole Dyes with Highly Tuneable Properties in Solution and Thin Films.

We have studied the impact of achiral substituents on the chiral supramolecular architectures of diketopyrrolo[3,4-c]pyrrole-1,2,3-1H-triazole (DPP) dyes. We decorated the same chiral DPP motif with substituent groups on the nitrogen atoms of the lactam moiety: the hydrophobic n-octyl alkyl chain, the hydrophilic tri(ethylene glycol) (TEG) chain and the thermo-cleavable tert-butoxycarbonyl (t-Boc) carbamate group. In spite of having identical conjugated chromophore and chiral appendages, in aggregated form the three dyes displayed profoundly different optical, chiroptical, electrochemical and thermal features. ECD measurements revealed differences in the aggregation modes, which would be inaccessible by most other techniques. We found strong chiroptical features, which would have major implications in the context of chiral organic opto-electronics and in the development of other highly innovative technological applications.

Aggregation Modes of Chiral Diketopyrrolo[3,4-c]pyrrole Dyes in Solution and Thin Films.

The chiroptical features of chiral diketopyrrolo[3,4-c]pyrrole (DPP) derivatives have been only marginally investigated to date. In this regard, we have synthesized ad hoc four chiral DPP dyes, functionalized with enantiopure alkyl groups from natural sources either on the lactam moieties or on the terminal positions of the π-conjugated backbone, to promote an efficient self-assembly into chiral supramolecular structures. For each of them, the aggregation modes has been investigated by absorbance and ECD spectroscopies in conditions of solution aggregation and on thin films, considering the effects of deposition technique (drop casting vs. spin coating) and post-deposition operations (solvent and thermal annealing). The effect of the structure of lateral π-conjugated units attached to the central DPP scaffold, as well as that of the position of the alkyl chiral group, has been assessed. ECD revealed superior capability, compared to absorbance spectroscopy, to provide information on the aggregation modes and to detect the possible co-existence of multiple aggregation pathways.

Bio-Inspired Redox-Adhesive Polydopamine Matrix for Intact Bacteria Biohybrid Photoanodes.

Interfacing intact and metabolically active photosynthetic bacteria with abiotic electrodes requires both establishing extracellular electron transfer and immobilizing the biocatalyst on electrode surfaces. Artificial approaches for photoinduced electron harvesting through redox polymers reported in literature require the separate synthesis of artificial polymeric matrices and their subsequent combination with bacterial cells, making the development of biophotoanodes complex and less sustainable. Herein, we report a one-pot biocompatible and sustainable approach, inspired by the byssus of mussels, that provides bacterial cells adhesion on multiple surfaces under wet conditions to obtain biohybrid photoanodes with facilitated photoinduced electron harvesting. Purple bacteria were utilized as a model organism, as they are of great interest for the development of photobioelectrochemical systems for H2 and NH3 synthesis, biosensing, and bioremediation purposes. The polydopamine matrix preparation strategy allowed the entrapment of active purple bacteria cells by initial oxygenic polymerization followed by electrochemical polymerization. Our results unveil that the deposition of bacterial cells with simultaneous polymerization of polydopamine on the electrode surface enables a 5-fold enhancement in extracellular electron transfer at the biotic/abiotic interface while maintaining the viability of the cells. The presented approach paves the way for a more sustainable development of biohybrid photoelectrodes.

Polydopamine coating of living diatom microalgae.

Many microorganisms produce specific structures, known as spores or cysts, to increase their resistance to adverse environmental conditions. Scientists have started to produce biomimetic materials inspired by these natural membranes, especially for industrial and biomedical applications. Here, we present biological data on the biocompatibility of a polydopamine-based artificial coating for diatom cells. In this work, living Thalassiosira weissflogii diatom cells are coated on their surface with a polydopamine layer mimicking mussel adhesive protein. Polydopamine does not affect diatoms growth kinetics, it enhances their resistance to degradation by treatment with detergents and acids, and it decreases the uptake of model staining emitters. These outcomes pave the way for the use of living diatom cells bearing polymer coatings for sensors based on living cells, resistant to artificial microenvironments, or acting as living devices for cells interface study.

Infrared Irradiation-Assisted Solvent-Free Pd-Catalyzed (Hetero)aryl-aryl Coupling via C-H Bond Activation.

The increasing attention towards environmentally friendly synthetic protocols has boosted studies directed to the development of green and sustainable methods for direct C-H bond arylation of (hetero)arenes. In this context, here the infrared (IR) irradiation-assisted solvent-free Pd-catalyzed direct C-H bond arylation of (hetero)arenes was achieved. Several heteroaryl-aryl coupling reactions were described, also involving heterocycles commonly used as building blocks for the synthesis of organic semiconductors. The reaction tolerated many functional groups on the aromatic nuclei. The IR-irradiation as the energy source compared favorably with thermal heating and, in combination with solvent-free conditions, provided an important contribution to the development of protocols fitting with the principles of green chemistry.

Bombyx mori Silk Fibroin Regeneration in Solution of Lanthanide Ions: A Systematic Investigation.

Silk Fibroin (SF) obtained from Bombyx mori is a very attractive biopolymer that can be useful for many technological applications, from optoelectronics and photonics to biomedicine. It can be processed from aqueous solutions to obtain many scaffolds. SF dissolution is possible only with the mediation of chaotropic salts that disrupt the secondary structure of the protein. As a consequence, recovered materials have disordered structures. In a previous paper, it was shown that, by modifying the standard Ajisawa's method by using a lanthanide salt, CeCl3, as the chaotropic agent, it is possible to regenerate SF as a fibrous material with a very ordered structure, similar to that of the pristine fiber, and doped with Ce+3 ions. Since SF exhibits a moderate fluorescence which can be enhanced by the incorporation of organic molecules, ions and nanoparticles, the possibility of doping it with lanthanide ions could be an appealing approach for the development of new photonic systems. Here, a systematic investigation of the behavior of degummed SF in the presence of all lanthanide ions, Ln+3, is reported. It has been found that all lanthanide chlorides are chaotropic salts for solubilizing SF. Ln+3 ions at the beginning and the end of the series (La+3, Pr+3, Er+3, Tm+3, Yb+3, Lu+3) favor the reprecipitation of fibrous SF as already found for Ce+3. In most cases, the obtained fiber preserves the morphological and structural features of the pristine SF. With the exception of SF treated with La+3, Tm+3, and Lu+3, for all the fibers re-precipitated a concentration of Ln+3 between 0.2 and 0.4% at was measured, comparable to that measured for Ce+3-doped SF.

Bioinspired Biomaterial Composite for All-Water-Based High-Performance Adhesives.

The exceptional underwater adhesive properties displayed by aquatic organisms, such as mussels (Mytilus spp.) and barnacles (Cirripedia spp.) have long inspired new approaches to adhesives with a superior performance both in wet and dry environments. Herein, a bioinspired adhesive composite that combines both adhesion mechanisms of mussels and barnacles through a blend of silk, polydopamine, and Fe3+ ions in an entirely organic, nontoxic water-based formulation is presented. This approach seeks to recapitulate the two distinct mechanisms that underpin the adhesion properties of the Mytilus and Cirripedia, with the former secreting sticky proteinaceous filaments called byssus while the latter produces a strong proteic cement to ensure anchoring. The composite shows remarkable adhesive properties both in dry and wet conditions, favorably comparing to synthetic commercial glues and other adhesives based on natural polymers, with performance comparable to the best underwater adhesives with the additional advantage of having an entirely biological composition that requires no synthetic procedures or processing.

Solvent-free Reactions for the Synthesis of Indolenine-based Squaraines and Croconaines: Comparison of Thermal Heating, Mechanochemical Milling, and IR Irradiation.

Squaraines and croconaines are organic dyes characterized by intense absorption in the visible or near-infrared spectral regions with applications ranging from biology to material sciences. They are commonly synthesized by condensation reactions of oxocarbonic acids (squaric or croconic acid, respectively) with electron-rich aromatic compounds in high-boiling organic solvents. Here, a simple, cost-effective, and environmentally benign process was developed for the synthesis of indolenine-based squaraines and croconaines under solvent-free conditions. Protocols based on conventional thermal heating, mechanochemical milling, and IR-light activation were compared.

Peripherical thioester functionalization induces J-aggregation in bithiophene-DPP films and nanoparticles.

In this work we demonstrated that the peripherical thioacetylation of a bithiophene-DPP molecule can greatly influence the solid-state properties triggering the formation of NIR emitting J-aggregates in both bithiophene-DPP films and nanoparticles. The morphology and the kinetic and thermal stability of the organic nanoparticles were also investigated.

In vivo functionalization of diatom biosilica with sodium alendronate as osteoactive material.

Bisphosphonates are a class of drugs widely used in the clinical treatment of disorders of bone metabolism, such as osteoporosis, fibrous dysplasia, myeloma and bone metastases. Because of the negative side effects caused by oral administration of bisphosphonates, various silica mesoporous materials have been investigated for a confined and controlled release of these drugs. Here, we propose biosilica from diatoms as suitable substrate for alendronate local activation of bone cells. Following a novel strategy, sodium alendronate can be in vivo incorporated into biosilica shells of cultured Thalassiosira weissflogii diatoms, by feeding the algae with an aqueous solution of the drug. After acid/oxidative treatments for removing organic matter, the resulting bisphosphonate-functionalized mesoporous biosilica was characterized and tested as osteoinductive support. Effects on osteoblast growth and anti-osteoclast activity have been examined by evaluating SaOS-2, BMSC, J774 cell viability on the alendronate-"doped" biosilica. The loading percentage of sodium alendronate into biosilica, estimated as 1.45% w/w via TGA, was able to decrease metabolic activity of J774 osteoclasts-like cells till 5% over glass control. We demonstrated a good osteoconductive ability and activation of a tissue regeneration model together with osteoclasts inhibition of the functionalized biosilica, opening the way to interesting applications for diatom microalgae as a bioinspired mesoporous material for tissue engineering.

Data from in vivo functionalization of diatom mesoporous biosilica with bisphosphonates.

Diatoms are unicellular photosynthetic microalgae that produce a sophisticated mesoporous biosilica shell called frustule. Easy to achieve and extract, diatom frustules represent a low-cost source of mesoporous biocompatible biosilica. In this paper, the possibility to in vivo functionalize the diatom biosilica with bisphosphonates (BPs) was investigated. In particular, two BPs were tested: the amino-containing sodium alendronate (ALE) and the amino-lacking sodium etidronate (ETI). According to first SEM-EDX analysis, the presence of the amino-moiety in ALE structure allowed a better incorporation of this BP into living diatom biosilica, compared to ETI. Then, diatom growth was deeply investigated in presence of ALE. After extraction of functionalized frustules, ALE-biosilica was further characterized by XPS and microscopy, and ALE release was evaluated by ferrochelation assay. Moreover, the bone regeneration performances of ALE-functionalized frustules were preliminarily investigated on bone osteoblast-like cells, via Comassie staining. Data are related to the research article "In vivo functionalization of diatom biosilica with sodium alendronate as osteoactive material".

A highly efficient heptamethine cyanine antenna for photosynthetic Reaction Center: From chemical design to ultrafast energy transfer investigation of the hybrid system.

The photosynthetic Reaction Center (RC) from the purple bacterium Rhodobacter sphaeroides has unique photoconversion capabilities, that can be exploited in assembly biohybrid devices for applications in solar energy conversion. Extending the absorption cross section of isolated RC through covalent functionalization with ad-hoc synthesized artificial antennas is a successful strategy to outperform the efficiency of the pristine photoenzyme under visible light excitation. Here we report a new heptamethine cyanine antenna that, upon covalent binding to RC, forms a biohybrid (hCyN7-RC) which, under white light excitation, has doubled photoconversion efficiency versus the bare photoenzyme. The artificial antenna hCyN7 successfully meets appropriate optical properties, i.e. peak position of absorption and emission maximum in the visible and NIR region respectively, large Stokes shift, and high fluorescence quantum yield, required for improving the efficiency of the biohybrid in the production of the charge-separated state in the RC. The kinetics of energy transfer and charge separation of hCyN7-RC studied via ultrafast visible and IR spectroscopies are here presented. The antenna transfers energy to RC chromophores within <10 ps and the rate of QA reduction is doubled compared to the native RC. These experiments further demonstrate hCyN7-RC, besides being an extremely efficient white light photoconverter, fully retains the charge separation mechanism and integrity of the native RC photoenzyme, thus allowing to envisage its suitability as biohybrid material in bioinspired systems for solar energy conversion.

Stability of Selected Hydrogen Bonded Semiconductors in Organic Electronic Devices.

The electronics era is flourishing and morphing itself into Internet of Everything, IoE. At the same time, questions arise on the issue of electronic materials employed: especially their natural availability and low-cost fabrication, their functional stability in devices, and finally their desired biodegradation at the end of their life cycle. Hydrogen bonded pigments and natural dyes like indigo, anthraquinone and acridone are not only biodegradable and of bio-origin but also have functionality robustness and offer versatility in designing electronics and sensors components. With this Perspective, we intend to coalesce all the scattered reports on the above-mentioned classes of hydrogen bonded semiconductors, spanning across several disciplines and many active research groups. The article will comprise both published and unpublished results, on stability during aging, upon electrical, chemical and thermal stress, and will finish with an outlook section related to biological degradation and biological stability of selected hydrogen bonded molecules employed as semiconductors in organic electronic devices. We demonstrate that when the purity, the long-range order and the strength of chemical bonds, are considered, then the Hydrogen bonded organic semiconductors are the privileged class of materials having the potential to compete with inorganic semiconductors. As an experimental historical study of stability, we fabricated and characterized organic transistors from a material batch synthesized in 1932 and compared the results to a fresh material batch.

Synthesis and Computational Study of Semicroconaines and Nonsymmetric Croconaines.

The synthesis of two new dye families of croconic acid derivatives, semicroconaine and nonsymmetric croconaine dyes, is reported for the first time. These compounds show strong absorption in the UV-visible and NIR, respectively. Semicroconaine dyes were obtained by a scalable and efficient condensation of croconic acid with aromatic heterocyclic methylene-active compounds. The subsequent reaction of the semicroconaine dyes with aromatic heterocyclic compounds affords nonsymmetric croconaines. The structure and electronic properties of the synthesized compounds have been investigated by preliminary theoretical calculations at DFT level of approximation.

Solvent-Free Pd-Catalyzed Heteroaryl-Aryl Coupling via C-H Bond Activation for the Synthesis of Extended Heteroaromatic Conjugated Molecules.

Direct arylation of thienopyrrolodione, diketopyrrolopyrroles, benzodithiophene derivatives, and fluorinated heteroarenes with functionalized aryl iodides is proven in solvent-free and non-anhydrous conditions. The reaction is performed in the presence of air and tolerates several functional groups on both the coupling partners, enabling a convenient synthesis of extended heteroaromatic conjugated molecules.

Highly Stable and Red-Emitting Nanovesicles Incorporating Lipophilic Diketopyrrolopyrroles for Cell Imaging.

Diketopyrrolopyrroles (DPPs) have recently attracted much interest as very bright and photostable red-emitting molecules. However, their tendency to form nonfluorescent aggregates in water through the aggregation-caused quenching (ACQ) effect is a major issue that limits their application under the microscope. Herein, two DPP molecules have been incorporated into the membrane of highly stable and water-soluble quatsomes (QS; nanovesicles composed of surfactants and sterols), which allow their nanostructuration in water and, at the same time, limits the ACQ effect. The obtained fluorescent organic nanoparticles showed superior structural homogeneity, along with long-term colloidal and optical stability. A thorough one- (1P) and two-photon (2P) fluorescence characterization revealed the promising photophysical features of these fluorescent nanovesicles, which showed a high 1P and 2P brightness. Finally, the fluorescent QSs were used for the in vitro bioimaging of Saos-2 osteosarcoma cell lines; this demonstrates their potential as nanomaterials for bioimaging applications.