Herbal and nano-based herbal medicine: New insights into their therapeutic aspects against periodontitis.

Objective: Periodontitis is a type of prevalent chronic inflammatory disorder resulting in a failure in the function of tissues supporting the tooth, like gingiva, alveolar bone, and periodontal ligament. Although antibiotic therapy is a common therapy for periodontitis cases, this approach can cause some adverse effects in these patients. Thus, finding an effective curative option with low side effects is still a puzzle. Materials and Methods: This narrative review was conducted on the effects of herbal and nano-based herbal medicine against periodontitis by searching different databases such as Google Scholar, PubMed, Scopus, Web of Science, Science Direct, and Scientific Information Databases. Results: According to published studies, some popular herbal formulations, such as Aloe vera, curcumin, Melaleuca alternifolia, and Scutellaria baicalensis Georgi, can be effective in periodontitis treatment. However, these herbal products may be accompanied by some pharmacological limitations, such as poor bioavailability, instability, and weak water solubility. On the other hand, harnessing nano-based herbal formulations can elevate the bioavailability, diminish toxicity, and omit repeated administration of drugs. Conclusion: Herbal and nano-based herbal products can create a good chance to treat periodontitis efficiently.

Comparative assessment of flexural strength of monolithic zirconia with different thicknesses and two sintering techniques.

OBJECTIVES: This study aimed to compare the flexural strength of monolithic zirconia with different thicknesses and two sintering techniques. MATERIALS AND METHODS: This in vitro, experimental study was conducted on 28 monolithic zirconia discs with 10 mm diameter and 0.5 (n = 14) and 1.2 mm (n = 14) thickness. Each group was divided into two subgroups (n = 7) for fast (60 min) and conventional (120 min) sintering at 1450°C. After sintering, the specimens were thermocycled and their flexural strength was measured by piston-on-3-balls technique in a universal testing machine (0.5 mm/min, 1.2 mm pin diameter). Data were analyzed by the Weibull test, one-way analysis of variance, and Tukey's test (α = .05). RESULTS: The flexural strength of specimens with 1.2 mm thickness was significantly higher than that of specimens with 0.5 mm thickness (p < .05). The flexural strength of 1.2 mm/120-min group was slightly, but not significantly, higher than that of 1.2 mm/60-min group (p > .05). The flexural strength of 0.5 mm/120-min group was slightly, but not significantly, higher than that of 0.5 mm/60-min group (p > .05). CONCLUSION: The increase in thickness of monolithic zirconia increases its flexural strength; however, increasing the sintering time appears to have no significant effect on the flexural strength of monolithic zirconia.

Effect of shape and design of the internal connection of tissue-level and bone-level implants on detorque values and removal forces: An in vitro study.

STATEMENT OF PROBLEM: Optimal implant stability and preventing complications such as screw loosening are paramount concerns for implant-supported prostheses. However, studies examining the influence of various internal connection designs on detorque values and removal forces, critical aspects of implant success, are lacking. PURPOSE: The purpose of this in vitro study was to assess the impact of the shape and design of the internal connection in tissue-level and bone-level implants on the detorque value and the force required for abutment removal from the implant. MATERIAL AND METHODS: Forty dental implants were securely mounted in 10×6×20-mm acrylic resin blocks positioned perpendicular to the surface. The implants were divided into 4 groups (n=10): bone-level SM Torx, tissue-level PSI Torx, bone-level UF Hex, and tissue-level UF Hex implants. After exposure to a dynamic loading test at 31.2 N, 2 Hz and 106 cycles, measurements were made of both detorque values and removal forces. Statistical analyses, including 1-way ANOVA with a post hoc Tukey test and Kolmogorov-Smirnov test, were conducted to assess the results (α=.05). RESULTS: The differences in detorque values among the 4 groups were statistically similar (P=.087). In terms of removal force values, tissue-level PSI implants exhibited the highest values, while bone-level UF implants had the lowest values, with significant differences in the removal forces among the 4 groups (P<.001). Pairwise comparisons revealed significant differences among the groups (P<.001), except for the comparison between tissue-level PSI and bone-level SM implants (P=.108). CONCLUSIONS: While detorque values remain consistent across implant types, the shape and design of the internal connection of implants has a significant impact on the removal force required for abutment detachment from the implant.

Dental implant considerations in patients with systemic diseases: An updated comprehensive review.

BACKGROUND: Various medical conditions and the drugs used to treat them have been shown to impede or complicate dental implant surgery. It is crucial to carefully monitor the medical status and potential post-operative complications of patients with systemic diseases, particularly elderly patients, to minimize the risk of health complications that may arise. AIM: The purpose of this study was to review the existing evidence on the viability of dental implants in patients with systemic diseases and to provide practical recommendations to achieve the best possible results in the corresponding patient population. METHODS: The information for our study was compiled using data from PubMed, Scopus, Web of Science and Google Scholar databases and searched separately for each systemic disease included in our work until October 2023. An additional manual search was also performed to increase the search sensitivity. Only English-language publications were included and assessed according to titles, abstracts and full texts. RESULTS: In total, 6784 studies were found. After checking for duplicates and full-text availability, screening for the inclusion criteria and manually searching reference lists, 570 articles remained to be considered in this study. CONCLUSION: In treating patients with systemic conditions, the cost-benefit analysis should consider the patient's quality of life and expected lifespan. The success of dental implants depends heavily on ensuring appropriate maintenance therapy, ideal oral hygiene standards, no smoking and avoiding other risk factors. Indications and contraindications for dental implants in cases of systemic diseases are yet to be more understood; broader and hardcore research needs to be done for a guideline foundation.

Enhancing oral function: A case report on mandibular overdenture utilization with custom-made subperiosteal implant.

Subperiosteal implants, previously set aside because of complications, are now emerging again as effective treatments for severe mandibular atrophy, aided by recent improvements in digital dentistry. Traditional dentures in such cases often face challenges with support and retention, necessitating complex regenerative procedures. This paper presents a case report of a 54-year-old male patient with significant mandibular atrophy who received a custom-made subperiosteal implant, showcasing promising results. The implant was precisely designed utilizing computed tomography (CT) scans, a 3D-printed model, the selective laser melting (SLM) technique, and constructed with biocompatible Ti6Al4V material. This innovative approach offered a practical solution, resulting in high patient satisfaction and no complications over a year of use.

Prevalence and antimicrobial resistance of bacterial agents isolated from the cases of dental caries.

Dental caries are mainly occur owing to the presence and activity of bacterial agents. The present study was done to assess the prevalence and antibiotic resistance of bacterial strains isolated from the cases of dental caries. Fifty patients with approved dental carries were included in the study. Sampling from the site of dental caries was done using the sterile swab. Swabs were transferred to laboratory and subjected to microbial culture. Species identification of bacteria was done using biochemical test. Bacterial isolates were subjected to disk diffusion to assess their antimicrobial resistance. S. aureus (40%) harboured the highest rate of contamination, while S. oralis (16%) and E. aerogenes (10%) harbored the lowest. S. aureus and S. mutans (6%) harbored the highest distribution amongst the cases of mix infections, while S. aureus and S. oralis (2%) harbnored the lowest. S. aureus strains harbored the highest rate of resistance toward tetracycline (90%), penicillin (75%), ampicillin (75%), amoxicillin (60%), and erythromycin (60%). E. coli strains harbored the highest rate of resistance toward tetracycline (90%), gentamicin (80%), ampicillin (70%), and erythromycin (70%). S. mutans strains harbored the highest rate of resistance toward tetracycline (93.33%), ampicillin (86.66%), penicillin (80%), amoxicillin (80%), and erythromycin (80%). S. oralis strains harbored the highest rate of resistance toward tetracycline (100%), ampicillin (75%), penicillin (62.50%), and amoxicillin (62.50%). E. aerogenes strains harbored the highest rate of resistance toward tetracycline (80%), gentamicin (80%), and ampicillin (80%). S. aureus bacteria isolated from dental caries harbored the highest rate of MDR. Distribution of resistance against more than 3 antimicrobial agents amongst the S. aureus, E. coli, S. mutans, S. oralis, and E. aerogenes bacteria isolated from the cases of dental caries was 90%, 60%, 80%, 62.50%, and 80%, respectively. Application of disk diffuin can help practitioners to reduce the rate of resistance in bacteria responsible for dental caries.

Comparison of coronal sealing of flowable composite, resin-modified glass ionomer, and mineral trioxide aggregate in endodontically treated teeth: An in-vitro study.

Background: Coronal seal is one of the essential factors that affects the success of endodontic treatment and reinforces the apical seal. The intra-orifice barrier is an efficient alternative approach to decrease coronal leakage in endodontically treated teeth and various materials have been used for this purpose. This study aimed to compare the coronal sealing of flowable composite, resin-modified glass ionomer (RMGI), and mineral trioxide aggregate (MTA) in endodontically treated teeth. Materials and Methods: In this in vitro study, 35 single-canal canine teeth were divided into five groups, including flowable composite, RMGI, MTA, positive control, and negative control groups. The teeth were filled with restorative materials according to the factory's instructions. Afterward, the samples were immersed in 2% methylene blue dye solution for 1 week at 37°C and 100% humidity condition. Finally, the teeth were sectioned longitudinally and dye penetration was measured using a stereomicroscope with ×10. Data were analyzed with Kolmogorov-Smirnov and Kruskal-Wallis tests (α = 0.05). Results: The positive control group showed the highest amount of dye penetration compared to other groups (12.34 ± 0.46). Dye penetration in the MTA group was significantly lower (4.25 ± 0.31) compared to the RMGI group (5.94 ± 0.24) (P = 0.02). Moreover, while the dye penetration in the MTA group was lower than in the flowable composite group (5.65 ± 0.26), the difference was not statistically significant (P = 0.12). Conclusion: MTA reduces the coronal leakage and provides an acceptable coronal seal in endodontically treated teeth, especially compared to RMGI, and therefore, using MTA as an intra-orifice barrier increases the endodontic treatment success rate.

Comparison of Stress and Strain Distribution Patterns in Canine Implant and Maxillary Bone in Three Occlusal Schemes Using Finite Element Analysis.

OBJECTIVES: This study aimed to compare the pattern of stress and strain distribution in canine implant and maxillary bone in the anterior group function (AGF), posterior group function (PGF), and canine guidance (CG) occlusal schemes by finite element analysis (FEA). MATERIAL AND METHODS: In this in vitro experimental study, a dental implant (10 × 4.1 mm) was inserted at the site of the maxillary canine in a model of the maxilla in Mimics software. The implant was scanned three-dimensionally and the data were transferred to SolidWorks software. The von Mises stress, shear stress, deformation, and strain were calculated in the AGF, PGF, and CG occlusal schemes by FEA. STATISTICAL ANALYSIS: Data were analyzed by ABAQUS software to calculate the stress transferred to the canine implant and maxillary bone in the three occlusal schemes. RESULTS: The maximum and minimum von Mises stress, elastic strain, shear stress, and deformation were noted in the AGF and PGF occlusal schemes, respectively, in all teeth. CONCLUSION: The PGF showed minimum von Mises stress, elastic strain, shear stress, and deformation in the canine implant and maxillary bone. Thus, it appears than the PGF is the best occlusal scheme for maxillary canine implant followed by the CG scheme.

Long-Term Clinical Outcomes of Single Crowns or Short Fixed Partial Dentures Supported by Short (≤6 mm) Dental Implants: A Systematic Review.

Long-term clinical outcomes of short dental implants (≤6 mm) supporting single crowns or short fixed partial dentures have been reported differently in different studies and need more clarification. This systematic study evaluated the rate of bone loss (BL), the durability of implants equal to or shorter than 6 mm supporting single crowns or short fixed partial dentures, and prosthetic-related side effects during 5 years of follow-up. Five databases (PubMed, MEDLINE, Scopus, Google Scholar, and Cochrane) were electronically and manually searched for longitudinal studies with a follow-up period of 5 years or more until January 2023. The study question was, "Does the implant equal to or shorter than 6 mm affect BL and survival rate of the implant-supported prosthesis after 5 years of follow-up?". From 752 identified articles, nine studies were selected for further evaluation. After 5 years of follow-up, most studies had more than 90% survival rate and the maximum BL was 0.54 mm. Still, in internal and external connections, these changes were not substantial. For example, screw loosening was the most common problem with implanted prostheses. Implants of 6 mm or shorter are a suitable treatment option in atrophic ridges with good durability and fewer side effects during a follow-up period of more than 5 years.

Tooth Graft: An Umbrella Overview.

This umbrella review aims to evaluate systematic/meta-analysis studies containing clinical evidence on tooth grafts as bone substitutes in the oral and maxillofacial regions. Using language restrictions and Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, an electronic database search of PubMed, MEDLINE, Embase, Cochrane library, and Google Scholar was conducted, featuring published studies up until August 2022. All systematic/meta-analysis review articles relating to tooth graft materials were matched against the inclusion criteria. Two qualified researchers independently assessed the studies' inclusion or exclusion criteria and risk of bias, and a third investigator assisted in resolving ambiguities. A total of 81 systematic/meta-analysis studies, comprising 21 animal-controlled trials, 23 randomized controlled human trials, 23 prospective studies, and 14 retrospective studies, were selected for this study. A small risk of bias was observed in systematic studies/meta-analyses. In addition, the clinical evidence from the analysis of these studies revealed a low incidence of side effects. According to the current review, two systematic reviews indicated that autogenous bone grafting of prepared teeth might be as effective as other bone grafting materials. Four studies also mentioned autologous grafts as potential alternatives to autologous grafts, autogenous demineralized dentin (ADDM), engineered grafts, root blocks, and dental matrix. On the other hand, three systematic studies stated that more long-term research is needed to confirm their findings. Finally, given the importance of standardization and homogeneity of studies for clinical cases, it is advised to be used cautiously due to the risks of transplant rejection.

Stress Analysis of Endodontically Treated Tooth-Implant Different Connectors Designs in Maxillary Posterior Region: A Finite Element Analysis.

OBJECTIVES: Using finite element analysis (FEA), this study aimed to determine the effect of nonrigid connectors (NRCs) and their position on the success of tooth and implant-supported fixed prostheses in the maxillary posterior region. MATERIALS AND METHODS: Three three-dimensional FEA models were designed, presuming maxillary second premolar and first molar to be extracted. Implant (replacing first molar), abutment, bone (spongious and cortical), first premolar (containing dentin, root cement, gutta-percha, and casting post and core), periodontal ligament, and three three-unit cemented porcelain-fused-to-metal prostheses (a rigid one and two nonrigid) were modeled. The NRC was once on the tooth side and once on the implant side. The prostheses were loaded twice. The first molar (180 N) and premolars (120 N) teeth were subjected to progressive vertical and oblique (12-degree) loads, and maximum von Mises stress and strain in teeth and connectors were calculated for each model. RESULTS: The findings of the current study showed evidence that tooth-implant design with an NRC has significantly increased the average stress in the tooth. The average stress in dentin was 769.02 for the mesial connector and 766.95 for the distal connector, and this was only 731.59 for rigid connector. Furthermore, it was observed that rigid connector has considerably minimized the stress within the tooth-implant-supported fixed partial denture. The average stress for the crown and metal frame is 346.22 and 526.41 in rigid connector, while it is 1,172.9 and 2,050.9 for the nonrigid mesial connector. CONCLUSION: Although distal NRC was more efficient than mesial NRC, using NRC will only reduce the stress applied to cortical bone and is not recommended in the posterior region of the maxilla.

Periodontitis and progression of gastrointestinal cancer: current knowledge and future perspective

Periodontitis is a polymicrobial disorder caused by dysbiosis. Porphyromonas gingivalis (P.gingivalis) and Fusobacterium nucleatum (F.nucleatum) are pathobiont related to periodontitis pathogenesis and were found to be abundant in the intestinal mucosa of inflammatory bowel disease (IBD) and colorectal cancer (CRC) patients. Besides, periodontal infections have been found in a variety of tissues and organs, indicating that periodontitis is not just an inflammation limited to the oral cavity. Considering the possible translocation of pathobiont from the oral cavity to the gastrointestinal (GI) tract, this study aimed to review the published articles in this field to provide a comprehensive view of the existing knowledge about the relationship between periodontitis and GI malignancies by focusing on the oral/gut axis (AU)

Shear bond strength of composite resins to lithium disilicate ceramics using universal bonding and different methods of surface preparation.

Background: Porcelain fracture or chipping is one of the limitations of all ceramic restorations. This study investigated the shear bond strength (SBS) of composite resins to lithium disilicate ceramics using universal bondings and different methods of surface preparation. Materials and Methods: In this experimental study, 72 specimens of e.max computer-aided design and computer-aided manufacturing (CAD/CAM) ceramic blocks were divided into six groups of 12 according to surface treatment: Group I-Hydrofluoric (HF) acid etching + All-Bond Universal bonding (ABU), Group II-Bur roughening (BR) + HF + ABU, Group III-BR + HF + Bis-Silane (Si) + ABU, Group IV-Sandblasting (SB) + ABU, Group V-SB + HF + ABU, Group VI-SB + HF + Si + ABU. After bonding of composite resin to the prepared ceramic surface and storage of samples in distilled water for 24 h, SBS test was done using the universal testing machine at a crosshead speed of 0.5 mm/min. Data were analyzed using the analysis of variance and Tukey's post hoc test (α = 0.05). Results: The mean values of SBS in six studied groups were 6.65 ± 2.78 MPa, 8.56 ± 2.69 MPa, 8.49 ± 2.14 MPa, 3.13 ± 1.66 MPa, 7.94 ± 2.4 MPa, and 10.04 ± 2.47 MPa, respectively. The mean values of SBS were significantly different (P < 0.001). The highest value of SBS was observed in Group VI and the lowest in Group IV. Conclusion: Ceramic sandblasting followed by HF etching, Bis Si, and ABU resulted in a higher SBS of composite resins to lithium disilicate ceramics.

Prevalence of malocclusion in Turkish children and adolescents: A systematic review and meta-analysis.

OBJECTIVES: The aim of this article is to establish a comprehensive nationwide prevalence of malocclusion traits on the sagittal, vertical, and transverse planes of space in the Turkish population. MATERIAL AND METHODS: A systematic search of PubMed, Scopus, and Web of Science was supplemented by manual searches of Google Scholar and the reference lists of included studies. Original Turkish health studies of any age were included. Strengthening the Reporting of Observational Studies in Epidemiology assessed study quality and bias (STROBE). Sagittal, vertical, and transverse malocclusion features were retrieved and gathered. RESULTS: Eleven studies were selected from 434 titles. Two studies showed a high risk of bias, eight low and one moderate. Thirteen thousand two hundred seventy-one individuals were investigated from early childhood to late adulthood. Most studies were sampled from universities and dental (nonorthodontic) clinics. The pooled malocclusion prevalence was 56% for Class I (95% confidence interval (CI): 44-68%), 31% for Class II (CI: 6-42%), and 11% for Class III (CI: 21-37%). The other common types of malocclusions were crowding (41%, CI: 18-65%), overjet (34%, CI: 21-50%), negative overjet (13%, CI: 7-20%), and crossbite (11%, CI: 7-15%). Additionally, there was no significant difference in Class I (relative risk [RR] = 1.00, [0.96-1.05]), Class II ([RR] = 0.97, [0.92-1.03]), and Class III ([RR] = 1.08, [0.96-1.225]) malocclusion by gender. CONCLUSIONS: This study showed Class I malocclusion has a high prevalence among the Turkish population followed by Class II and Class III malocclusions. In addition, crowding and overjet were the most prevalent malocclusions among Turkish individuals. There were no significant differences in the prevalence of malocclusions between males and females.

Comparing knowledge and opinions of medical and dental students in the field of pediatric anesthesia.

Background and Purpose: Dental treatment under general anesthesia (GA) is one of the common treatment methods today for dental treatment in children, so dentists' point of view in this field is very important. Therefore, the purpose of this study was evaluation the awareness and attitude of pediatric dentists and final-year dental students about dental treatment for children under GA. Methods: To conduct this study, 150 people, including 75 general dentists (GD) and 75 final-year dental students (FYDS), were randomly selected in Tehran. In this study, a researcher-made questionnaire containing 15 questions (7 awareness questions and 8 attitude questions) was used to evaluate the awareness and attitude of the participants. After extracting the raw results, statistical analysis of the results was done using SPSS-Ver. 22 software. Results: 60% of the participants (90 people) were men and the remaining 40% (60 people) were women. The results showed that the level of awareness of male dentists was significantly higher than that of female dentists (P = 0.015). In addition, although the awareness level of FYDS was lower than GD, this difference was not statistically significant (P = 0.130). The average level of awareness among different age groups had a significant difference (P = 0.009), so the age group of 36-45 years compared to the younger age groups (25-35 years) and the older age groups (36-45 and 55 -46 years), had a higher level of awareness. Conclusion: According to the findings, it can be concluded that it is necessary to use appropriate educational methods to improve the level of awareness and attitude of children's dentists.

Periodontitis and progression of gastrointestinal cancer: current knowledge and future perspective.

Periodontitis is a polymicrobial disorder caused by dysbiosis. Porphyromonas gingivalis (P.gingivalis) and Fusobacterium nucleatum (F.nucleatum) are pathobiont related to periodontitis pathogenesis and were found to be abundant in the intestinal mucosa of inflammatory bowel disease (IBD) and colorectal cancer (CRC) patients. Besides, periodontal infections have been found in a variety of tissues and organs, indicating that periodontitis is not just an inflammation limited to the oral cavity. Considering the possible translocation of pathobiont from the oral cavity to the gastrointestinal (GI) tract, this study aimed to review the published articles in this field to provide a comprehensive view of the existing knowledge about the relationship between periodontitis and GI malignancies by focusing on the oral/gut axis.

Accuracy of tooth-implant impressions: Comparison of five different techniques.

PURPOSE: To compare the accuracy of five different tooth-implant impression techniques. MATERIALS AND METHODS: In this in vitro, experimental study, an acrylic model containing one bone-level Straumann dental implant at the site of maxillary first molar and an adjacent second premolar prepared for a porcelain fused to metal restoration was used. Impressions were made from the model using five different one-step tooth-implant impression techniques including scanning with an intraoral scanner, occlusal matrix, wax relief, closed-tray, and open-tray techniques. Each technique was repeated 15 times. The impressions were poured with dental stone, and the obtained casts were scanned by a laboratory scanner. The scan file of each technique was compared with the scan file of the original acrylic model by Geomagic Design X software. Data were analyzed by one-way analysis of variance, and Tamhane's post-hoc test (α = 0.05). RESULTS: For dental implant, intraoral scanning had the highest accuracy (0.1004 mm2 ) followed by open-tray (0.1914 mm2 ), occlusal matrix (0.2101 mm2 ), closed-tray (0.2422 mm2 ), and wax relief (0.2585 mm2 ) techniques (p < 0.05). For the prepared tooth, wax relief (0.0988 mm2 ) had the highest accuracy followed by occlusal matrix (0.1211 mm2 ), open-tray (0.1663 mm2 ), closed-tray (0.1737 mm2 ), and intraoral scanning (0.4903 mm2 ) technique (p < 0.05). For both dental implant and prepared tooth, occlusal matrix (0.2431 mm2 ) had the highest accuracy followed by open-tray (0.2574 mm2 ), wax relief (0.2693 mm2 ), closed-tray (0.2862 mm2 ), and intraoral scanning (0.3192 mm2 ) technique (p > 0.05). CONCLUSION: The compared simultaneous tooth-implant impression techniques had comparable accuracy with no significant difference.

Exosomes derived from mesenchymal stem cells: Heralding a new treatment for periodontitis?

Periodontitis, as a complex inflammatory disorder, is characterized by continuous destruction of the teeth-supporting components, like alveolar bone and periodontal ligament, and affects a great percentage of individuals over the world. Also, this oral disease is linked with multiple serious illnesses, e.g., cardiovascular disorders, diabetes, and oral cancer; thus, exerting efficient therapy for periodontitis is necessary. Unfortunately, the current therapies for the disease (e.g., surgical and nonsurgical methods) have not reflected enough effectiveness against periodontitis. At present, mesenchymal stem cell (MSC)-based remedy has created new hope for curating different diseases; however, MSCs have no capability to engraft into the chosen tissue, and the tumorigenic influences of MSCs are still the main concern. Interestingly, documents have revealed that MSC-derived mediators, like exosomes, which their exploitation is more feasible than intact MSCs, can be an effective therapeutic candidate for periodontitis. Therefore, in this study, we will review evidence in conjunction with their possible curative impacts on periodontitis cases.

The effect of different methods of cleansing temporary cement (with and without eugenol) on the final bond strength of implant-supported zirconia copings after final cementation: An in vitro study.

Background: The temporary cement remaining inside the dental prosthesis can act as a source of microbial colonization and contamination and decrease the final cement retention. Consequently, complete removal of temporary cement before permanent cementation is suggested. This study aimed to assess the effect of different cleaning methods for removing temporary cement on the tensile bond force (TBF) of permanently cemented implant-supported zirconia copings. Materials and Methods: In this in vitro study fifty titanium abutments were screwed onto 50 analogs with 30 Ncm torque into in acrylic resin blocks. Each abutment was scanned separately, and 50 zirconia copings were designed and milled. Permanent resin cement was used to cement copings of control group (N = 10). Copings were divided into two temporary cementation types that in each group, two cleansing methods were used: Temp-S (temporary cement with eugenol and sandblasted after debonding), Samples of the control group were placed in the universal testing machine, and the TBF values were recorded. Samples of the test groups after debonding and cleaning the abutments were subjected to cement with permanent resin cement, aging, and removing. Levene test, two-way analysis of variance (ANOVA), and Tamhane post hoc tests were applied. α = 0.05. Results: The highest and lowest TBF values were found for the TempNE-SU (554.7 ± 31.5 N) and Temp-S (492.2 ± 48 N) groups, respectively. The two groups of isopropyl alcohol baths in ultrasonics in combination with sandblasting showed statistically higher TBF values than the other two groups that used only sandblasting (P < 0.001) and had similar values compared to the control group. Conclusion: Sandblasting combined with immersion in an ultrasonic bath containing isopropyl alcohol resulted in statistically similar values to the values of cementation with resin cement from the beginning. However, cleaning the inside of the copings only by sandblasting method reduced the values of the final retention force in comparison to cement with permanent resin cement from the beginning.

Stress Distribution in 5-Unit Fixed Partial Dentures with a Pier Abutment and Rigid and Nonrigid Connectors with Two Different Occlusal Schemes: A Three-Dimensional Finite Element Analysis.

Objectives: This study aimed to assess stress distribution in 5-unit fixed partial dentures (FPDs) with a pier abutment and rigid (RC) and nonrigid connectors (NRCs) with the canine rise and group function occlusal schemes by finite element analysis (FEA). Materials and Methods: In this FEA study, a geometrical model of the maxilla with natural teeth and periodontal ligament (PDL) was three-dimensionally designed and meshed by ANSYS and Pro/Engineer software programs. A 5-unit FPD was then designed to replace the lost first premolar and first molar teeth; the second premolar served as a pier abutment, and the canine and second molar served as terminal abutments. Two FPDs were designed with RC and NRC. Each FPD was analyzed with the canine rise and group function occlusal schemes (a total of 4 models). The first and second molars (180 N), premolars (120 N), and canine (80 N) teeth were subjected to progressive vertical and oblique (12-degree) loads, and maximum von Mises stress and strain in teeth and connectors were calculated for each model. Results: The models had 73704 elements and 137732 nodes. The connector design and occlusal scheme had significant effects on stress distribution in FPDs. The highest von Mises stress (73.035 MPa) was recorded in FPD with RC and group function occlusal scheme. The lowest von Mises stress (0.004 MPa) was recorded in FPD with NRC and canine rise occlusal scheme. Conclusion: Oblique forces created greater stress, and FPD with NRC and canine rise occlusal scheme decreased stress in FPD and increased stress in the tooth crown.