Permittivity measurements for raw and boiled quinoa seeds versus temperature, bulk density, and moisture content.

Quinoa is a nutrient-rich pseudocereal that is gaining popularity in European countries since it is gluten-free and an interesting source of fat, proteins, minerals, and amino acids. However, up to date, the electric permittivity of quinoa seeds has not been measured and, therefore, this hampers the possibility of designing optimized recipes for its microwave processing. In this work, the permittivity of both raw and boiled quinoa seeds is measured around 2.45 GHz at several conditions for temperature, moisture content, and bulk density. The grain kernel permittivity is also estimated from the Complex Refractive Index (CRI) mixture equation and different bulk density measurements. The obtained results show different temperature behaviours for raw and boiled seeds, whereas the permittivity of quinoa seeds versus moisture content and bulk density was as expected: the permittivity (both the dielectric constant and loss factor) levels increased as the observed variables did. From the measured data, it can be concluded that both raw and boiled quinoa can be processed with microwave technology, although care must be taken with raw quinoa grain kernels since the permittivity increases significantly with temperature, and a thermal runaway may occur.

Dielectric Characterization of Fabric Aggregates around the 2.45 GHz ISM Band under Various Humidity, Density, and Temperature Conditions.

Fabric permittivity is critical for the manufacturing of wearable sensors and antennas as well as predicting how fabrics interact with electromagnetic fields. Engineers should also understand how permittivity changes under different temperatures, densities, and moisture content values, or when several fabrics are mixed in aggregates, when designing future applications such as microwave dryers. The permittivity of cotton, polyester, and polyamide fabric aggregates is investigated in this paper for a wide range of compositions, moisture content levels, density values, and temperature conditions around the 2.45 GHz ISM band using a bi-reentrant resonant cavity. The obtained results show extremely comparable responses for all characteristics investigated for single and binary fabric aggregates. Permittivity always increases as temperature, density, or moisture content levels rise. Moisture content is the most influential characteristic, causing enormous variations in the permittivity of aggregates. Fitting equations are supplied for all data, with exponential functions used to accurately model variation in temperature and polynomial functions employed to precisely model density and moisture content variations with low error levels. The temperature permittivity dependence of single fabrics without the influence of air gaps is also extracted from fabric and air aggregates by using complex refractive index equations for two-phase mixtures.

Microwave Treatment vs. Conventional Pasteurization: The Effect on Phytochemical and Microbiological Quality for Citrus-Maqui Beverages.

This study uncovered the impacts of microwave (MW) treatments compared to conventional pasteurization (TP) on the quality of functional citrus-maqui beverages, with added sucrose or stevia. The influence of these thermal treatments on the microbiological burden and phytochemical composition was determined by processing under two MW power levels (600 W and 800 W) and TP at 85 °C for 15 s for 60 days at room temperature (20 °C). The results indicated that, beyond the microbiological quality achieved in the juices treated by both MW and TP technology, there were no differences among the treatments regarding the stability of vitamin C, anthocyanin, and flavanone concentrations. However, anthocyanins were more stable in those beverages with sucrose added, rendering a better red color. Besides, all treatments ensured microbiological stability throughout the entire storage time. In conclusion, MW treatment could be considered as an alternative to TP, which ensures microbial safety, protecting functional compounds associated with health effects.

Dynamic Permittivity Measurement of Ground-Tire Rubber (GTR) during Microwave-Assisted Devulcanization.

Many efforts are being made to find innovative ways of recycling rubber from end-of-life tires (ELTs), also called ground tire Rubber (GTR). Recycling through devulcanization allows the reintroduction of rubber back into the manufacturing industry. Such a process requires providing enough energy to break the sulfur links, while preventing damage to the polymeric chain. Microwave heating is controllable, efficient, and it does not rely on conventional heating mechanisms (conduction, convection) which may involve high heating losses, but rather on direct dielectric heating. However, to adequately control the microwave-assisted devulcanization performance, a thorough knowledge of the GTR permittivity versus temperature is required. In this work, GTR permittivity was monitored during its devulcanization. A resonant technique based on a dual-mode cylindrical cavity was used to simultaneously heat rubber and measure its permittivity at around 2 GHz. The results show sharp changes in the GTR permittivity at 160 and 190 °C. After the GTR cooled down, a shifted permittivity evidences a change in the GTR structure caused by the devulcanization process. Microwave-assisted devulcanization effectiveness is proven through time-domain nuclear magnetic resonance (NMR) measurements, by verifying the decrease in the cross-link density of processed GTR samples compared to the original sample.

Permittivity Measurements for Cypress and Rockrose Biomass Versus Temperature, Density, and Moisture Content.

Permittivity of materials is of utmost importance for microwave applicators' design and to predict high-frequency dielectric heating of materials. In the case of aromatic plant biomass, however, there are few data that help researchers design microwave applicators for microwave-assisted extraction. In this work, the permittivity of cypress and rockrose biomass samples were measured versus temperature, density, and moisture content. A resonant technique based on a coaxial bi-reentrant microwave cavity was employed to obtain the complex permittivity of biomass samples as a function of those magnitudes around the 2.45 GHz ISM frequency. The obtained measurements show that large variations for permittivity values can be found with moisture content and density changes for both cypress and rockrose biomass. Temperature also has effects in a lesser degree, although it has an important influence on the cypress biomass loss factor. Polynomial expressions fitting the experimental data were provided in order to facilitate the estimation of intermediate values, which were not explicitly arranged in this work. As a general trend, the permittivity of cypress and rockrose biomass increases with increasing values of moisture content and density, whereas the biomass loss factor increases when temperature rises.

Effect of pierced metallic objects on SAR distributions at 900 MHz.

A study of the interaction between mobile phone antennas and a human head in the presence of different types of metallic objects, attached and pierced to the compressed ear, is presented in this article. Computed and measured results have been performed by considering a quasi-half-wavelength dipole as the radiating source and measurements with the DASY4 dosimetric assessment system. Two different human head models have been implemented: a homogeneously shaped sphere and a three-level head model with four different kinds of tissue. Antenna input impedance, reflection coefficient, radiation patterns, SAR distribution, absorbed power, and peak SAR values have been computed and measured for diverse scenarios, electromagnetic simulators, and organs. Despite the measuring accuracy limitations of the study, both simulated and measured results suggest that special attention has to be paid to peak SAR averaged values when wearing metallic objects close to the radiation source, since some increment of peak SAR averaged values is expected.