Fostering Excellence in Knee Arthroplasty: Developing Optimal Patient Care Pathways and Inspiring Knowledge Transfer of Advanced Surgical Techniques.

Osteoarthritis of the knee is common. Early sports trauma or cartilage defects are risk factors for osteoarthritis. If conservative treatment fails, partial or total joint replacement is often performed. A joint replacement aims to restore physiological biomechanics and the quality of life of affected patients. Total knee arthroplasty is one of the most performed surgeries in musculoskeletal medicine. Several developments have taken place over the last decades that have truly altered the way we look at knee arthroplasty today. Some of the fascinating aspects will be presented and discussed in the present narrative review.

Detecting early osteoarthritis through changes in biomechanical properties - A review of recent advances in indentation technologies in a clinical arthroscopic setup.

Osteoarthritis (OA) is a degenerative joint disease currently affecting half of all women and one-third of all men aged over 65 and it is predicted to even increase in the next decades. In the variety of causes leading to OA, the first common denominator are changes in the extracellular matrix of the cartilage. In later stages, OA affects the whole joint spreading to higher levels of tissue architecture causing irreversible functional and structural damage. To date, the diagnosis of OA is only formulated in the late stages of the disease. This is also, where most present therapies apply. Since a precise diagnosis is a prerequisite for targeted therapy, tools to diagnose early OA, monitor its progression, and accurately stage the disease are wanted. This review article focuses on recent advances in indentation technologies to diagnose early OA through describing biomechanical cartilage characteristics. We provide an overview of microindentation instruments, indentation-type Atomic Force Microscopy, ultrasound, and water-jet ultrasound indentation, Optical Coherence Tomography-based air-jet indentation, as well as fiber Bragg grating.

Changes in stiffness of the extracellular and pericellular matrix in the anulus fibrosus of lumbar intervertebral discs over the course of degeneration.

Analogous to articular cartilage, changes in spatial chondrocyte organisation have been proposed to be a strong indicator for local tissue degeneration in the intervertebral disc (IVD). While a progressive structural and functional degradation of the extracellular (ECM) and pericellular (PCM) matrix occurs in osteoarthritic cartilage, these processes have not yet been biomechanically elucidated in the IVD. We aimed to evaluate the local stiffness of the ECM and PCM in the anulus fibrosus of the IVD on the basis of local chondrocyte spatial organisation. Using atomic force microscopy, we measured the Young's modulus of the local ECM and PCM in human and bovine disc samples using the spatial chondrocyte patterns as an image-based biomarker. By measuring tissue from 31 patients and six bovine samples, we found a significant difference in the elastic moduli (E) of the PCM in clusters when compared to the healthy patterns single cells (p = 0.029), pairs (p = 0.016), and string-formations (p = 0.010). The ECM/PCM ratio ranged from 0.62-0.89. Interestingly, in the bovine IVD, the ECM/PCM ratio of the E significantly varied (p = 0.002) depending on the tissue origin. Overall the reduced E in clusters demonstrates that cluster formation is not only a morphological phenomenon describing disc degeneration, but it marks a compromised biomechanical functioning. Immunohistochemical analyses indicate that collagen type III degradation might be involved. This study is the first to describe and quantify the differences in the E of the ECM in relation to the PCM in the anulus fibrosus of the IVD by means of atomic force microscopy on the basis of spatial chondrocyte organisation.

High-Quality Genome-Scale Reconstruction of Corynebacterium glutamicum ATCC 13032.

Corynebacterium glutamicum belongs to the microbes of enormous biotechnological relevance. In particular, its strain ATCC 13032 is a widely used producer of L-amino acids at an industrial scale. Its apparent robustness also turns it into a favorable platform host for a wide range of further compounds, mainly because of emerging bio-based economies. A deep understanding of the biochemical processes in C. glutamicum is essential for a sustainable enhancement of the microbe's productivity. Computational systems biology has the potential to provide a valuable basis for driving metabolic engineering and biotechnological advances, such as increased yields of healthy producer strains based on genome-scale metabolic models (GEMs). Advanced reconstruction pipelines are now available that facilitate the reconstruction of GEMs and support their manual curation. This article presents iCGB21FR, an updated and unified GEM of C. glutamicum ATCC 13032 with high quality regarding comprehensiveness and data standards, built with the latest modeling techniques and advanced reconstruction pipelines. It comprises 1042 metabolites, 1539 reactions, and 805 genes with detailed annotations and database cross-references. The model validation took place using different media and resulted in realistic growth rate predictions under aerobic and anaerobic conditions. The new GEM produces all canonical amino acids, and its phenotypic predictions are consistent with laboratory data. The in silico model proved fruitful in adding knowledge to the metabolism of C. glutamicum: iCGB21FR still produces L-glutamate with the knock-out of the enzyme pyruvate carboxylase, despite the common belief to be relevant for the amino acid's production. We conclude that integrating high standards into the reconstruction of GEMs facilitates replicating validated knowledge, closing knowledge gaps, and making it a useful basis for metabolic engineering. The model is freely available from BioModels Database under identifier MODEL2102050001.

Optical Sectioning and Visualization of the Intervertebral Disc from Embryonic Development to Degeneration.

Intervertebral disc (IVD) degeneration is a leading cause of low back pain and it entails a high degree of impairment for the affected individuals. To decode disc degeneration and to be able to develop regenerative approaches a thorough understanding of the cellular biology of the IVD is essential. One aspect of this biology that still remains unanswered is the question of how cells are spatially arranged in a physiological state and during degeneration. The biological properties of the IVD and its availability make this tissue difficult to analyze. The present study investigates spatial chondrocyte organization in the anulus fibrosus from early embryonic development to end-stage degeneration. An optical sectioning method (Apotome) is applied to perform high resolution staining analyses using bovine embryonic tissue as an animal model and human disc tissue obtained from patients undergoing spine surgery. From a very high chondrocyte density in the early embryonic bovine disc, the number of cells decreases during gestation, growth, and maturation. In human discs, an increase in cellular density accompanied the progression of tissue degeneration. As had already been demonstrated in articular cartilage, cluster formation represents a characteristic feature of advanced disc degeneration.

Evaluation of braking performances of patients with osteoarthritis of the knee or hip: Are there alternatives to a brake simulator?

OBJECTIVE: This study aims to develop and evaluate a simple tool for daily practice that might allow a rough estimate of individual braking performance (brake response time, BRT) of patients with osteoarthritis or those with arthroplasty of the knee or hip. METHODS: In this cross-sectional study, we examined 162 patients (72 men, 90 women; mean age = 64±12.8 years) who suffered from osteoarthritis of the knee (n=45) or hip (n=64) or who underwent a total hip (n=37) or knee (n=16) arthroplasty. BRT of each patient was measured in a brake simulator. The results were compared to demographic data, various clinical tests, and pain surveys. From these data, a multiple linear regression model was developed. RESULTS: From the observed correlations, the regression model consisted of age (correlation with BRT τ=0.176, p=0.001), sex (τ=0.361, p<0.001), Hau's step test (τ=-0.345, p<0.001), and the pain dimension of the Hip disability/Knee injury and Osteoarthritis Outcome Score (τ=-0.265, p<0.001). We, therefore, suggested the following formula: BRTest = 634.8 - (8.8 x Hau) + 119.2 (for women) + (3.0 x age) - (1.3 x H/KOOS Pain). The above-mentioned variables contributed significantly to the prediction of BRT and could achieve a multiple R² adj of 0.31. The model leaves a residual standard error (i.e., SD of the residuals) of 158.4 ms, which is superior to a model without predictors; F (4.140)=16.8, p<0.001. CONCLUSION: Our evaluated regression model offers an uncertainty which is comparable to the one based on a fixed time period after surgery or a defined pathologic condition. The high variability even within a single patient over several brake simulator measurements makes it unlikely for a model to be generated solely based on clinical testing. Taking the available data in literature into account, we advise caution when formulating a real-time- or condition-based recommendation. We rather suggest being aware of risk factors that might lead to impaired BRT to sensitize patients to their impaired ability to drive. We identify such risk factors, namely old age, female sex, impaired musculoskeletal function, as tested in Hau's step test, and high levels of pain. LEVEL OF EVIDENCE: Level III, Therapeutic Study.

Different vacuum levels, vacuum reduction during low milk flow, and different cluster detachment levels affect milking performance and teat condition in dairy cows.

Traditionally, machine milking is performed at a constant vacuum supply. The system vacuum has to be set high enough to allow a sufficiently high vacuum at the teat end, despite the inevitable vacuum drop caused by milk flow. This leads to an increased vacuum load on the teat, especially when milk flow ceases at the end of milking. We tested the hypothesis that a milk flow-controlled adaptation of vacuum settings during milking allows even higher vacuum levels than are usually recommended during the period of high milk flow if the vacuum is reduced during low milk flow. Combined with a high cluster detachment flow rate level, increased milking performance is expected without an increased effect on teat tissue. Ten Holstein dairy cows were milked with a bucket milker with the claw vacuum adjusted in the absence of milk flow at a regular (43 kPa) and high (48 kPa) claw vacuum, with and without vacuum reduction during low milk flow (<2 kg/min), and combined with different cluster detachment levels (0.2, 0.6, and 1 kg/min). Each treatment was applied in each cow during 4 subsequent milkings in a randomized crossover design. Both claw vacuum and milk flow were continuously recorded throughout milking. Teat tissue thickness was measured using a cutimeter and teat wall diameter was measured by B-mode ultrasonography at 5 min after the end of milking. Milk yield was not affected by either vacuum settings or detachment levels. Machine-on time in treatments with vacuum reduction was shorter at high than at low vacuum and decreased with increasing detachment levels. Average milk flow was higher at high than at low vacuum and reached highest values in milkings without vacuum reduction at both vacuum levels. The average milk flow was higher at a cluster detachment of 1 kg/min than at 0.2 kg/min. However, both teat tissue thickness and (as a tendency) teat wall diameter at 5 min after cluster detachment were higher in milkings at high vacuum without vacuum reduction compared with all other treatments. In conclusion, high claw vacuum up to 48 kPa increases milking performance because of higher milk flow and reduced machine-on time. Negative effects of high vacuum on teat tissue are prevented by reducing vacuum during low milk flow (<2 kg/min) at the start and end of milking. Additionally, using a high cluster detachment level reduces machine-on time without a loss of harvested milk.

Estimating Braking Performance in Osteoarthritis of the Knee or Hip with a Reaction Timer.

OBJECTIVE: To investigate if testing in a brake simulator can be replaced by a simple reaction timer setup imitating the ergonomic conditions of emergency braking when evaluating the ability to drive in patients with musculoskeletal problems of the lower extremities. METHODS: A cross-sectional survey was performed in the Department of Orthopaedic Surgery in our University Hospital from October 2014 until May 2015. Patients attending our department with either osteoarthritis or arthroplasty of the knee or hip were asked to participate in the study if they had a valid driving license. The age limit was from 18 to 85 years. Both women and men were included. Registered demographic data were patient age, height, sex, body weight, and body mass index. Braking performance (brake response time [BRT]) was evaluated in a brake simulator that was embedded into a real car cabin (10 measurements). The values obtained were compared with those registered when simply testing (5 measurements) those patients with a normal reaction timer setup that imitated the sitting position in a car. Kendall's tau correlation coefficient was calculated between the values obtained from the brake simulator with those from the reaction timer setup. RESULTS: Altogether, 137 patients (median age 67 years [range, 24-89 years]) with either osteoarthritis of the knee (n = 55) or hip (n = 82) were tested. Age was comparable in both collectives (P = 0.807). The mean body height was 1.70 m in both groups. Knee patients presented with a higher body weight of approximately 5 kg (P = 0.014) and consequently also had a higher body mass index (P = 0.023). The median BRT in the brake simulator was 628 ms (range, 390-1444 ms) for all subjects: 592 ms (range, 418-1146 ms) in the hip group and 696 ms (range, 390-1444 ms) in the knee group. Measurement values obtained by the reaction timer were significantly (P < 0.001) higher by approximately 15% (SD, 22%) than those measured in the brake simulator. A moderate correlation was found between the reaction timer and the brake simulator, with a Kendall's tau of 0.449 (P < 0.001) for all patients. Interestingly, hip patients showed a higher correlation (τ = 0.471) than knee patients (τ = 0.263). CONCLUSION: Even though the measured correlations do not allow us to make a definite statement concerning braking performance, especially in knee patients, a simple reaction timer test can provide a low-cost first estimate of BRT for patients and their treating physicians. For forensic statements, the brake simulator will, however, remain the gold standard.

Influence of spine surgery on the ability to perform an emergency stop while driving a car.

BACKGROUND: Spinal surgeries have strongly increased in number over the past decade. The question of when it is safe to resume driving is thereby one the most frequently asked questions that patients ask of their treating physician. OBJECTIVE: The aim of this study was to assess braking performance before and after spine surgery. METHODS: Reaction time, foot transfer time (together brake response time [BRT]), and brake force (BF) were evaluated in a drive simulator. A longitudinal patient cohort (n= 27) was tested preoperatively and at the first follow-up. A cross-sectional cohort (n= 27) was tested at > 1 year postoperatively. The values from these groups were compared with a healthy age-matched control group of 24 volunteers. RESULTS: No significant improvement in BRT was seen in lumbar fusion three months postoperatively (p= 0.597); BF was even weaker than it was preoperatively (p= 0.044). In comparison to the control group (median BRT 479 ms), preoperative BRT was already impaired in lumbar fusion patients (median 560 ms), representing an increased braking distance of 2.25 m at 100 km/h. CONCLUSION: Although most patients performed adequately, about one third presented critical braking performance. Risk factors for impaired braking may include scheduled multisegmental fusion surgery, female sex, and pain.

Radiographic Hip or Knee Osteoarthritis and the Ability to Drive.

The question of whether patients with musculoskeletal disorders are fit to drive is of paramount importance for them and frequently is directed to the treating orthopedic specialist. Although perioperative braking performance has been increasingly investigated in recent years, scientific data on braking safety in individuals with osteoarthritis (OA) are scarce. This study analyzed the braking performance of 158 patients with OA of the right or left knee or hip and compared the results with radiographic OA grading according to the Kellgren-Lawrence classification scale. Reaction time and foot transfer time (together called brake response time [BRT]) and brake force were measured in a real car cabin, and the values were compared with measurements obtained from young (n=34) and age-matched (n=36) control groups. Although the majority of BRTs in both control groups remained below 600 milliseconds, patients with both hip and knee OA, whether on the right or left side, had significantly worse values (P<.001) and frequently exceeded this limit. A stronger impact was observed on the right side and in knee OA, with the worst results found in patients with bilateral OA (median BRT for bilateral hip OA, 656 milliseconds [range, 468-1459 milliseconds]; median BRT for bilateral knee OA, 696 milliseconds [range, 527-772 milliseconds]), leading to an increased total stopping distance of up to 32 m at 100 km/h. No correlation of braking performance with radiographic OA manifestation was observed (Kendall tau for BRT: τ=0.007, P=.92; Kendall tau for brake force: τ=-0.014, P=.82), which makes radiographs an inadequate tool for medical driving recommendations. [Orthopedics. 2017; 40(1):e82-e89.].