Model test study on the mechanical response of the deep buried tunnel lining.

Deep-buried tunnels with weak surrounding rock are frequently encountered issues in traffic engineering. It plays an important role in the excavation process and the project operation. This paper applies the theoretical analysis and laboratory test related to four different conditions in terms of their thickness to determine the mechanical response of deep-buried tunnel lining. Then, the energy dissipative structure theory is employed to explain the experimental results. This paper has made the following achievements: firstly, it is found that the toughness of the secondary lining was found to be often the most important indicator of tunnel safety, with better-toughness linings having higher tensile strength and crack resistance. Secondly, it suggests that the inclusion of steel reinforcement in the concrete lining can effectively improve the secondary lining toughness. Finally, it proves that the more ductile liner had more energy, higher load-carrying capacity, and was better able to maintain the overall stability of the structure.

Responses to phytoplankton community succession and expression of key functional genes in plateau lakes under 17ß-estradiol interference.

Steroid estrogens (SEs) have garnered global attention because of their potential hazards to human health and aquatic organisms at low concentrations (ng/L). The ecosystems of plateau freshwater lakes are fragile, the water lag time is long, and pollutants easily accumulate, making them more vulnerable to the impact of SEs. However, the knowledge of the impact of SEs on the growth and decomposition of phytoplankton communities in plateau lakes and the eutrophication process is limited. This study investigated the effects and mechanisms of SEs exposure on dominant algal communities and the expression of typical algal functional genes in Erhai Lake using indoor simulations and molecular biological methods. The results showed that phytoplankton were sensitive to 17ß-estradiol (E2ß) pollution, with a concentration of 50, and 100 ng/L E2ß exposure promoting the growth of cyanophyta and chlorophyta in the short term; this poses an ecological risk of inducing algal blooms. E2ß of 1000 ng/L exposure led to cross-effects of estrogenic effects and toxicity, with most phytoplankton being inhibited. However, small filamentous cyanobacteria and diatoms exhibited greater tolerance; Melosira sp. even exhibited "low inhibition, high promotion" behavior. Exposure to E2ß reduced the Shannon-Wiener diversity index (H'), Pielou index (J), and the number of dominant algal species (S) in phytoplankton communities, leading to instability in community succession. E2ß of 50 ng/L enhanced the expression levels of relevant functional genes, such as ftsH, psaB, atpB, and prx, related to Microcystis aeruginosa. E2ß of 50 ng/L and 5 mg/L can promote the transcription of Microcystis toxins (MC) related genes (mcyA), leading to more MC production by algal cells.

Study on stress variation of advance fiberglass anchor bolts during tunnel excavation process.

One of the main causes for excessive deformation within a tunnel is due to the instability of the soil or soft rock ahead of the excavation face. Fiberglass bolts have been shown to be a useful advance reinforcement method for the excavation face. In this paper, an improved ADECO-RS (Analysis of controlled deformation in rock and soils) method had been proposed for soft rock mountain tunnels, in terms of the partial (mainly the upper bench) excavation face reinforcement and also for the bench excavation method. Strain gauges were used to test the micro-strain in the fiberglass bolt to investigate how the axial force of the fiberglass bolt varied during the tunnel excavation. In addition, combined with the field tunnel deformation monitoring data, the relationship between the reinforcement parameters of the fiberglass bolts and the tunnel construction phase were discussed. The research results show that: (1) The stress state of the anchor rod is related to the reinforcement length of the anchor rod; (2) Excavation within the lap area of the fiberglass bolt leads to an increase in the axial force of the bolt, while excavation outside the lap area of the fiberglass bolt has no effect on the anchor; (3) Reducing the reinforcement area of rock mass will affect the stability of the excavation. To ensure the stability of the excavation face, the initial support construction loop should be completed as soon as possible; (4) In a future project with similar conditions, the recommended lap length of the fiberglass bolt could be 3 m utilizing the fiberglass bolt grouting face reinforcement method.

Composition, distribution, and source of organic carbon in surface sediments of Erhai Lake, China.

Lake sediment is an important organic carbon (OC) sink. Nevertheless, few studies have been conducted on sediment organic carbon (SOC) in lakes, and the effects of environmental variables on SOC pools remain poorly understood. We combined physicochemical and spectroscopic analyses to investigate the composition, distribution, and source of OC in surface sediments of Erhai Lake, southwest China, and explored the relationships between environmental variables and its SOC pool. The SOC pool consists of relatively high proportions of labile organic carbon fractions, mainly from algal production, which are rapidly decomposed and exhibit high turnover rates. The relative content of humus carbon ranges from 13.5 % to 20.5 %, with fulvic acid carbon predominating (average 52.95 %), indicating weak humification and a relatively active humus carbon pool. The dissolved organic matter in water column and sediments of Erhai Lake is largely influenced by endogenous production, with a great contribution from phytoplankton. Surface sediments contained more protein-like components than overlying waters (80.0 % vs. 63.0 %), attributed mainly to abundant algal deposition and intense bacterial metabolism. Among environmental variables, sediment chlorophyll a showed the strongest relationship with the SOC pool, and was associated with rapid decomposition and promotion of the humification process, which supported the conclusion that algae had an important influence on the SOC pool. The SOC pool in the southern region of the lake is mainly contributed by algae, other microorganisms, and sewage, exhibiting a greater potential to release organic matters into the water column. The center and northern SOC pools show relatively stable characteristics and stronger OC sink capacity, mainly because of the input of terrestrial refractory organic matters from runoff. Our data shed light on the OC storage mechanisms in the surface sediments of Erhai Lake and provide theoretical bases for enhancing the OC sink of sediments in the lake.

Relative contributions of different sources to DOM in Erhai Lake as revealed by PLS-PM.

Dissolved organic matter (DOM) is a complex mixture of organic molecules that plays an important role in freshwater lake ecosystems. Excitation emission matrix-parallel factor analysis (EEM-PARAFAC) is an important tool for the identification and source analysis of DOM but is still inadequate for studying the differences and quantifying the contributions of different sources. Here, based on the maximum fluorescence intensities (Fmax) of the four fluorescent components (e.g., protein-like component C1, and the humic-like components C2, C3, C4) identified by EEM-PARAFAC, combined with large-scale data obtained from observations at Erhai Lake, we used partial least squares path modeling (PLS-PM) to improve the understanding of the migration and transformation mechanisms of DOM. The results showed that the phytoplankton and trophic state had greater impacts on DOM, while the impacts of sediment and inflow rivers were less significant. The results of the models that used nitrogen nutrients (N) and phosphorus nutrients (P) to separately indicate the trophic state suggested that the driving force of P on DOM was stronger than that of N in Erhai Lake. Among the four fluorescent components, the protein-like component with the largest relative proportion (41.98%) was mainly affected by phytoplankton, which was consistent with the autogenic characteristics obtained through spontaneous source index (BIX). The duality of the humic-like components was consistent with the duality of DOM through fluorescent index (FI). C3 had a higher sensitivity to the trophic state than the other components, and C2 received the greatest positive contribution from the rivers entering the lake. These results provide an improved insight into the influence of different sources on the behavior of DOM and demonstrate the potential of using PLS-PM to study the complex driving mechanism of aquatic biogeochemical parameters.

Study on the Release Potential of BPA and Steroid Estrogens in the Sediments of Erhai Lake, a Typical Plateau Lake of China.

On-site sampling analysis and laboratory-scale experiments were conducted to study the pollution status and release potential of EDCs in Erhai Lake. We found that nitrogen and phosphorus pollution in Erhai Lake sediment were both at a high level, as well as EDCs pollution. The concentrations of BPA, E2α, E1, E2ß, EE2, and E3 were 36.84 ng/g(DW), 13.04 ng/g(DW), 128.97 ng/g(DW), 52.57 ng/g(DW), 18.48 ng/g(DW) and 5.36 ng/g(DW), respectively. The concentrations of E2α, E1, E2ß and EE2 in the bottom water were higher than the surface water due to the impact of sediment release. The results of the 20 days release test indicated that BPA release from the sediment had a greater correlation with the original concentration and the particle size of sediment, while the steroid EDCs had no obvious correlation with these two factors, probably due to the difference in hydrophobicity between them. Under hydraulic disturbance and aerobic conditions, the release process of EDCs was accompanied by a large amount of microbial degradation, and degradation amount > released amount. BPA was released quickly, 9.56% was released in 20 days, but only 3.37% of steroid EDCs released. In comparison, the release process of steroids was longer and posed a greater threat to aquatic ecology.

MOFs-derived conductive structure for high-performance removal/release of phosphate as electrode material.

Porous metal-organic frameworks (MOFs) have drawn increasing attention as promising phosphate adsorbents. Yet the potential agglomeration of MOFs particles and the difficult collection process largely thwarted their application. Meanwhile, adsorbents regeneration might destroy MOFs structures due to the use of strong alkaline solution. In this work, we reported a strategy for designing and fabricating an electrode to remove phosphate based on MIL-101 derived metal/carbon via a two-step carbonization step, which not only introduced C doping but also created a stable structure. With the assistance of electric field, the migration and capture of phosphate anions were greatly enhanced. Under 1 V condition, the material exhibited a high maximum removal capacity of 97.73 mg P/g. Adsorption kinetics and parameters for phosphate at different conditions were analyzed. Langmuir and Freundlich isotherms were employed to validate the adsorption data. More importantly, the regeneration of electrode was achieved in a more facile and efficient way than micro/ nanoparticles adsorbents by simple voltage control. Such an intriguing approach may provide a new platform to further expand the use of MOFs for adsorption process.

Effects of antibiotics on nitrogen uptake of four wetland plant species grown under hydroponic culture.

To investigate the effects of antibiotics on nitrogen removal and uptake by wetland plants, four typical macrophyte species, Cyperus alternifolius L., Typha angustifolia L., Lythrum salicaria L., and Acorus calamus L., were grown in hydroponic cultivation systems and fed wastewater polluted with 10 µg L-1 Ofloxacin (OFL) and Tetracycline (TET). Biomass production, nitrogen mass concentration, chlorophyll content, root exudates, and nitrogen removal efficiency of hydroponic cultivation were investigated. The results indicated that in all hydroponic systems, NH4+-N was entirely removed from the hydroponic substrate within 1 day and plant nitrogen accumulation was the main role of the removed NO3-. OFL and TET stimulated the accumulation of biomass and nitrogen of A. calamus but significantly inhibited the NO3--N removal ability of L. salicaria (98.6 to 76.2%) and T. augustifolia (84.3 to 40.2%). This indicates that A. calamus may be a good choice for nitrogen uptake in wetlands contaminated with antibiotics. OFL and TET improved the concentrations of total organic carbon (TOC), total nitrogen (TN), organic acid, and soluble sugars in root exudates, especially for oxalic acid. Considering the significant correlation between TOC of root exudates and nitrogen removal efficiency, the TOC of root exudates may be an important index for choosing macrophytes to maintain nitrogen removal ability in wetlands contaminated with antibiotics.

Adsorption and degradation of 14C-bisphenol A in a soil trench.

Bisphenol A (BPA) has caused widespread concern among scholars as a result of its estrogenic toxicity. It exists mainly in natural waters, sediments, and soil, as well as sewage and wastewater sludge. Considering that BPA is a common environmental pollutant that is removed along with chemical oxygen demand (COD), nitrogen, and phosphorus in drainage treatment systems, it is important to research the fate of BPA in sewage treatment systems. In this research, laboratory batch experiments on soil degradation and adsorption were conducted with 14C-BPA, aiming to discuss the transport and degradation characteristics of BPA in both simulated facilities and a soil trench. Based on the experimental results, the Freundlich model could be applied to fit the isothermal adsorption curve of the BPA in soil. A low mobility characteristic of BPA was discovered. The mineralization rate of BPA was fast and that of the reaction showed small fluctuations. After degradation, 21.3 and 17.7% of the BPA groups (the experimental group treated with ammonia oxidase (AMO) inhibitor and the control group) were converted into 14CO2, respectively. This indicates that the nitrification and degradation of BPA had a certain competitive relationship. Besides, nitrification did not significantly affect the soil residue of BPA. Through the soil trench test, the average removal rate of BPA in the soil trench was 85.5%. 14CO2 was discharged via the mineralization of BPA, accounting for 2.5% of the initial input. BPA easily accumulated in the bottom soil of the soil trench. BPA and its metabolites in the effluent accounted for 14.5% of the initial dosage. The residual extractable BPA and its metabolites in the soil accounted for 51.3%, and the remaining part of the unextractable residue represented 19.8% of the initial radioactive dosage.