[Characteristics of Microplastic Pollution in Sediment of Silty Coast in Culture Bay].

Microplastic pollution is a central issue of great concern in the current environmental field. Microplastic pollution in marine environmental media is widely reported, but the characteristics of microplastic pollution in deep sediments are rarely reported. Based on this, three sampling points were set up on the muddy coast near the Haizhou Bay, a typical aquaculture sea area, to analyze the characteristics of microplastic pollution in sediment column samples. The study showed that the abundance of microplastics in the sediments of the study area was(0.12 ± 0.07)n·g-1, which was at the medium pollution level. The total amount of microplastics in the sediment column was 3.43-6.00 times the abundance of microplastics in the surface sediment (5 cm). The abundance of microplastics in the sediment column samples showed regional differences. There was no significant difference in the abundance of microplastics in the sediment at different depths, but the index decreased with the increase in depth. The relationship between sediment moisture content, depth, and microplastics indicated that the abundance of microplastics in sediment was related to the physical properties of the sediment. Transparent and black microplastics accounted for the highest proportion in each station. Fiber was the most common form of microplastics in the sediment, and microplastics with small particle size accounted for the majority. The density of microplastics did not prevent its appearance in the sediment. The pollution characteristics of microplastics varied greatly in different depths of sediments.

Dietary resveratrol supplementation on growth performance, immune function and intestinal barrier function in broilers challenged with lipopolysaccharide.

This study discusses the effects of resveratrol (RES) on the productive performance, immune function and intestinal barrier function of broiler chickens challenged with lipopolysaccharide (LPS). Two hundred and forty 1-day-old male Arbor Acres broilers were randomly divided into 4 groups of 6 replicates each, with 10 broilers per replicate. This experiment used a 2 × 2 factorial design with dietary factors (basal diets or basal diets supplemented with 400 mg/kg RES were administered from d 1 to 21) and stress factors (intraperitoneal injection of 0.5 mg/kg BW of saline or LPS at 16, 18 and 20 d of age). The results showed that LPS challenge had a significant adverse effect on average daily gain (ADG) in broilers at 16 to 21 d of age (P < 0.05), whereas the addition of RES to the diet inhibited the LPS-induced decrease in ADG (P < 0.05). RES also alleviated LPS-induced immune function damage in broilers, which was manifested by the decrease of spleen index (P < 0.05) and the recovery of serum immunoglobulin M and ileal secretory immunoglobulin A content (P < 0.05). The LPS challenge also disrupts intestinal barrier function and inflammation, and RES mitigates these adverse effects in different ways. RES attenuated LPS-induced reduction of villus height in the jejunum and ileum of broilers (P < 0.05). LPS also caused an abnormal increase in plasma D-lactic acid levels in broilers (P < 0.05), which was effectively mitigated by RES (P < 0.05). LPS challenge resulted in a significant decrease in mRNA expression of occludin in the intestinal mucosa (P < 0.05), which was mitigated by the addition of RES (P < 0.05). RES significantly decreased the mRNA expression of toll-like receptor 4, nuclear factor kappa-B and tumor necrosis factor alpha in the ileum tissue stimulated by LPS (P < 0.05). Taken together, this study shows that RES exerts its beneficial effect on broilers challenged with LPS by alleviating immune function damage, relieving intestinal inflammation and barrier damage, and thus improving growth performance.

Endoluminal Vacuum-Assisted Closure Therapy for Upper Gastrointestinal Leak, Perforation, and Fistula: A Case Series and Literature Review.

BACKGROUND: With the increasing incidence of upper digestive tract tumors, more upper digestive tract surgeries are performed each year, and surgeons have difficulty in the postoperative management of gastrointestinal anastomotic fistula. The use of a new minimally invasive technique, endoluminal vacuum-assisted closure (E-VAC), has increased the success rate of the treatment of gastrointestinal fistula. METHODS: We present 6 cases of gastrointestinal fistula treated in our hospital in 2021: 3 cases of anastomotic fistula after esophageal cancer surgery, 2 cases of anastomotic fistula after gastric cancer surgery, and one case of esophageal rupture after trauma. With E-VAC and other adjuvant treatment measures, the gastrointestinal fistulas were eventually closed or significantly reduced. RESULTS: Both local and systemic infections in all 6 patients were controlled with the use of E-VAC device, resulting in significant reduction or closure of fistulas. CONCLUSION: E-VAC devices can effectively help in the removal of the exudate and necrotic tissue around the fistula, promote the proliferation of granulation tissue, and support closure of the fistula. However, further improvements to the device are needed to improve patient comfort and operational safety.

A synchronous demodulation technology based on sample-and-hold for eddy current sensors.

This paper proposes a synchronous demodulation technology based on sample-and-hold which shows significant advantages in the application of precision sensors. The traditional synchronous demodulation methods are discussed, and then the working principle of the proposed method is theoretically analyzed in detail. It is found that the proposed method can not only effectively suppress the harmonic components caused by the signal source but is also beneficial to improving the dynamic range of precision sensors. The eddy current sensor is adopted as an example of precision sensors, and a high-precision eddy current displacement sensor prototype was designed and tested. The results show that with the proposed method, the harmonics in the output signal are suppressed more effectively, and the demodulation circuit is relatively simplified. This synchronous demodulation method has an extensive application prospect in precision sensors.

[Indicator Function of Ragworm (Nereididae) on Sediment Microplastic in Haizhou Bay Intertidal Zone].

Sediment samples were collected from nine sites of three sections, in the intertidal zone of Haizhou bay in July 2018. The abundance and characteristics of microplastics in the sediments (and ragworms within the sediments) were then determined to identify the source of microplastics in ragworms, and to explore the effects of ragworms on microplastics in sediment. The average abundance of microplastics in tidal flat sediments was (0.49±0.17) n·g-1, which was at a high level in domestic offshore environmental studies. Among all the microplastics detected, the most common form and color were fiber and black-gray, respectively, and the materials were mainly polyethylene (PE), polyester (PET), and polystyrene (PS). The detection rate of microplastics in ragworm was 77.78%-86.67%, with an average abundance of (6.68±2.21) n·ind-1; the abundance was significantly correlated with individual mass (r=0.42, P=0.002). The microplastic abundance was significantly higher in ragworms with individual mass over 1.5 g than in those with a mass of<0.5 g or 0.5-1 g (F3=141.029, P=0.000). In ragworms, microplastics were dominated by small black or blue fibers, and the main materials were PE and PET. By analyzing the various characteristics of microplastics with a particle size of 0-3 mm, it was found that the abundance of microplastics in sediments was strongly correlated with that in ragworms (r=0.79,P=0.01); the main form (r=0.90, P=0.035) and the material composition (r=0.73, P=0.024) also showed significant correlation between sediments and ragworms. This indicates that ragworms ingest microplastics in the sedimentary environment and exchange the microplastics with the sediments. Therefore, ragworms can be used as an indicator species of microplastic pollution in sediments.

Design of an adaptive stator for bundled piezo-walk motors.

Bundled piezoelectric motors combine several actuators to achieve high output power. However, mutual interference between the actuators leads to reduction in working efficiency. This work presents an adaptive stator that can reduce the mutual interference in bundled piezowalk motors. The stator consists of leaf springs for improving motor contact condition and proof masses that serve as an inertial body for maintaining high output force. Parameters of the proof masses and leaf springs are analyzed, and the working zone of the stator is discussed. A prototype of a linear motor with the designed adaptive stator is fabricated and tested. The maximum speed of a six-leg motor is 103 mm/s, and the stall force is approximately 1.2 N, driven with sinusoidal waveforms of 25Vpp at 30 kHz. Mutual interference between actuators is reduced remarkably with the adaptive stator. A comparison of six- and four-leg motors proves that motor performance has a linear relationship with the number of actuators, thereby indicating the potential of increasing output capability with additional actuators.

Note: A valve-type piezoelectric reciprocating pump with secondary resonant vibrator.

A valve-type piezoelectric diaphragm pump using secondary resonant vibrator is introduced in this paper. The secondary resonant vibrator, which is mainly composed of a first vibrator and a second vibrator, is used to coordinate the frequency incompatibility between piezoelectric elements and check valves. The intermittent vibration of the first vibrator excites the resonant vibration of the second vibrator. The diaphragm in the pump chamber moves with the second vibrator, resulting in chamber volume and pressure variations. Control circuit capable of frequency tracking is designed. Vibration displacement and flow rate changing with driving voltage amplitude, frequency, and backpressure are studied in experiments. The flow rate of a prototype driven by voltage of 712 Vpp is 13.94 ml/min at secondary resonant frequency of 6 Hz.

High-fidelity AFM scanning stage based on multilayer ceramic capacitors.

A kind of multilayer ceramic capacitors (MLCCs) has been verified to have good micro-actuating properties, thus making them good candidates for nano-positioning. In this paper, we successfully employed the MLCCs as lateral scanners for a tripod scanning stage. The MLCC-based lateral scanners display hysteresis under 1.5% and a nonlinearity less than 2% even with the simplest open-loop voltage drive. The developed scanning stage was integrated into a commercial AFM to evaluate its imaging performance. Experimental results showed that sample images with high fidelities were obtained. SCANNING 38:184-190, 2016. © 2015 Wiley Periodicals, Inc.

Switched capacitor charge pump used for low-distortion imaging in atomic force microscope.

The switched capacitor charge pump (SCCP) is an effective method of linearizing charges on piezoelectric actuators and therefore constitute a significant approach to nano-positioning. In this work, it was for the first time implemented in an atomic force microscope for low-distortion imaging. Experimental results showed that the image quality was improved evidently under the SCCP drive compared with that under traditional linear voltage drive.

Note: A novel piezoelectrically driven pipette using centrifugal force.

This paper proposes a novel piezoelectrically driven pipette, which utilizes centrifugal force in swing motion of a vibrating tube as the driving force, to input and output liquid at first bending resonant frequency. Control circuit capable of frequency tracking is designed. Pulse volume changing with different driving voltage amplitude, driving frequency, tip size, and target reagents are studied in experiments. The output pulse volume of a prototype pipette driven by voltage of 560 V(pp) at 175.9 Hz is 43.2 µl with a variation of ±3.5%. Minimum water spots of 3 µl can be deposited in this manner. This pipette represents an alternative to standard liquid transfer techniques in chemical or biological experiments.

Note: Self-sensing based on charge control improves the performance of active damping using piezoelements.

A piezoelectric element can be used separately as a sensor or an actuator. A self-sensing strategy based on a charge driver can utilize a piezoelectric element as a sensor while actuating. The strategy was proven via experiments on a cantilever vibrator using a piezoelectric plate with both sensing and actuating functions. The amplitude of the vibration was actively damped by a factor exceeding 90%. The method can be used in numerous fields, including scanning probe microscopy, vibration suppression, and monitoring the health of structures.

Power density of piezoelectric transformers improved using a contact heat transfer structure.

Based on contact heat transfer, a novel method to increase power density of piezoelectric transformers is proposed. A heat transfer structure is realized by directly attaching a dissipater to the piezoelectric transformer plate. By maintaining the vibration mode of the transformer and limiting additional energy losses from the contact interface, an appropriate design can improve power density of the transformer on a large scale, resulting from effective suppression of its working temperature rise. A prototype device was fabricated from a rectangular piezoelectric transformer, a copper heat transfer sheet, a thermal grease insulation pad, and an aluminum heat radiator. The experimental results show the transformer maintains a maximum power density of 135 W/cm(3) and an efficiency of 90.8% with a temperature rise of less than 10 °C after more than 36 h, without notable changes in performance.

Note: creep character of piezoelectric actuator under switched capacitor charge pump control.

A major deficiency in piezoelectric actuator performance is caused by hysteresis and creep effects. Switched capacitor charge pump control was previously proved to be an effective way to reduce hysteresis. In this work, creep character of a piezoelectric stack under charge pump control is investigated and modeled. Experiments show that the creep can be reduced by about 77% compared with the one under voltage control. The creep factor denoting the degree of creep shows hysteresis loops similar to displacement outputs under voltage control.

Coupled torsional and longitudinal vibrations of piezoelectric fiber actuator with helical electrodes.

The vibration characteristics of a piezoelectric fiber actuator with helical electrodes are studied theoretically and experimentally. Its working principle indicates that the torsional, longitudinal, and tangential deformations of the fiber are coupled. A simplified dynamic model is deduced to investigate the properties of the coupled vibrations and their corresponding equivalent circuits are also provided. Resonant frequencies and mechanical coupling coefficients in free-free boundary condition are calculated. The trends of resonant frequencies as functions of the electrode helical angle and fiber length are discussed and validated in experiments.

Novel cationic lipids possessing protonated cyclen and imidazolium salt for gene delivery.

In this study, two novel protonated cyclen and imidazolium salt-containing cationic lipids differing only in their hydrophobic region (cholesterol or diosgenin) have been designed and synthesized for gene delivery. Cationic liposomes were easily prepared from each of these lipids individually or from the mixtures of each cationic lipid and dioleoylphosphatidyl ethanolamine (DOPE). Several studies including DLS, gel retardation assay, ethidium bromide intercalation assay, and TEM demonstrated that these amphiphilic molecules are able to bind and compact DNA into nanometer particles that could be used as non-viral gene delivery agents. Our results from in vitro transfection showed that in association with DOPE, two cationic lipids can induce effective gene transfection in HEK293 cells. Furthermore, the gene transfection efficiencies of two cationic lipids were dramatically increased in the presence of calcium ion (Ca(2+)). It is notable that the gene transfection abilities of two cationic lipids were maintained in the presence of 10% serum. Besides, different cytotoxicity was found for two lipoplexes. This study demonstrates that the title cationic lipids have large potential to be efficient non-viral gene vector.

Diol glycidyl ether-bridged cyclens: preparation and their applications in gene delivery.

Polymeric 1,4,7,10-tetraazacyclododecanes (cyclens) using diol glycidyl ether with different chain length as bridges (5a-e) were designed and synthesized from various diols, 1,7-diprotected cyclen and epichlorohydrin. The molecular weights of the title polymers were measured by GPC with good polydispersity. Agarose gel retardation and fluorescent titration using ethidium bromide showed good DNA-binding ability of 5. They could retard plasmid DNA (pDNA) at an N/P ratio of 4-6 and form polyplexes with sizes around 100-250 nm from an N/P ratio of 10 to 60 and relatively low zeta-potential values (5-22 mV). The cytotoxicity of 5 assayed by MTT is much lower than that of 20 kDa PEI. In vitro transfection against A549 and 293 cells showed that the transfection efficiency (TE) of 5c/DNA polyplexes is close to that of 20 kDa PEI at an N/P ratio of 5. Structure-activity relationship (SAR) of 5 was discussed in their DNA-binding, cytotoxicity, and transfection studies. The TE of 5c/DNA polyplexes could be improved by the introduction of 50 µM of chloroquine, the endosomolytic agents, to pretreated cells. These studies may extend the application areas of macrocyclic polyamines, especially for cyclen.

A high-sensitive static vector magnetometer based on two vibrating coils.

A static vector magnetometer based on two-dimensional (2D) vibrating coils actuated by a piezoelectric cantilever is presented. Two individual sensing coils are orthogonally fastened at the tip of cantilever and piezoelectric sheets are used to excite the cantilever bending. Due to off-axis coupler on the tip, the cantilever generates bending and twisting vibrations simultaneously on their corresponding resonant frequencies, realizing the 2D rotating vibrations of the coils. According to Faraday-Lenz Law, output voltages are induced from the coils. They are amplified by a pre-amplifier circuit, decoupled by a phase-sensitive detector, and finally used to calculate the vector of magnetic field at the coil location. The coil head of a prototype magnetometer possesses a dc sensitivity of around 10 µV/Gs with a good linearity in the measuring range from 0 to 16 µT. The corresponding noise level is about 13.1 nT in the bandwidth from 0.01 Hz to 1 Hz.

Switched capacitor charge pump reduces hysteresis of piezoelectric actuators over a large frequency range.

Piezoelectric actuators exhibit large hysteresis between the applied voltage and their displacement. A switched capacitor charge pump is proposed to reduce hysteresis and linearize the movement of piezoelectric actuators. By pumping the same amount of charges into the piezoelectric actuator quantitatively, the actuator will be forced to change its length with constant step. Compared with traditional voltage and charge driving, experimental results demonstrated that the piezoelectric stack driven by the charge pump had less hysteresis over a large frequency range, especially at ultralow frequencies. A hysteresis of less than 2.01% was achieved over a frequency range of 0.01-20 Hz using the charge pump driver.