RESUMO
Three metasurfaces (MTS) are designed to be combined with a series end-fed 1 × 10 array antenna with a modified Dolph-Chebyshev distribution for imaging applications in the millimeter frequency range, 24.05-24.25 GHz. A reduction in secondary lobes and an increase in FTBR can be achieved while preserving gain, radiation efficiency, SLL and size using an MTS-array combination. Moreover, as a result of each single-layer MTS-array combination, operation bandwidth is widened, with gain and radiation efficiency enhancement. The overall devices' size is 86.8 × 12 × 0.762 mm3. The envisioned application is collision avoidance in aid to visually impaired people at a medium-long distance.
RESUMO
In this paper, a portable three-dimensional (3D) scanning system for the accurate characterization of large raw material (e.g., cereal grain, coal, etc.) stockpiles is presented. The system comprises an array of high resolution millimeter-wave radars and a cm-level accuracy positioning system to accurately characterize large stockpiles by means of a high-resolution 3D map, making it suitable for automation purposes. A control unit manages the data received by the sensors, which are sent to a computer system for processing. As a proof of concept, the entire sensor system is evaluated in a real environment for electromagnetically scan a scaled stockpile of coal, used in the industry for handling raw materials. In addition, a highly efficient processing adaptive algorithm that may reconstruct the scanned structure in real-time has been introduced, enabling continuous dynamic updating of the information. Results are compared with those from a photogrammetry-like technique, revealing an excellent agreement.
RESUMO
An ultrathin, compact ecofriendly antenna suitable for IoT applications around 2.45 GHz is achieved as a result of exploring the use of Tencel fabric for the antenna's design. The botanical ecofriendly Tencel is electromagnetically characterized, in terms of relative dielectric permittivity and loss tangent, in the target IoT frequency band. To explore the suitability of the Tencel, a comparison is conducted with conventionally used RO3003, with similar relative dielectric permittivity, regarding the antenna dimensions and performance. In addition, the antenna robustness under bent conditions is also analyzed by measurement. To assess the relevance of this contribution, the ultrathin ecofriendly Tencel-based antenna is compared with recently published antennas for IoT in the same band and also, with commercial half-wave dipole by performing a range test on a ZigBee-based IoT testbed.
RESUMO
In this contribution a new technique to increase the bandwidth of metasurfaces without increasing their profile is presented. This work takes advantage of the potential multiresonant behavior of a metamaterial whose unit cells comprise nested metallization geometries in the same layer. The novelty stems from the possibility of overlapping these resonances for increasing the bandwidth (instead of obtaining a multiresonant metasurface). Several guidelines to achieve the aforementioned bandwidth broadening, which are applicable to all metasurface designs, will be provided. An equivalent circuit model will be used to better explain the presented technique; then, it will be applied to several metasurface absorbers (MTAs), showing not only a bandwidth broadening but also an absorption reinforcement. Measurements will be also presented to corroborate the simulation results.
RESUMO
An ultra-thin compact flexible CPW-fed slot monopole antenna suitable for the Internet of Things (IoT) applications was achieved as a result of exploring the use of Zirconia-based ENrG's Thin E-Strate® for the antenna's design. The electromagnetic characterization of the novel material at the frequency range of interest was analyzed. A comparison was made concerning the required dimensions and the simulation results regarding impedance matching and radiation properties, for three different dielectric substrates: Novel flexible ceramic (ENrG's Thin E-Strate), rigid Arlon 25N, and flexible Polypropylene (PP). Two different metallization techniques-electrotextile-based and inkjet printing-were used in the fabrication of prototypes based on ENrG's Thin E-Strate. Return losses measured results for the fabricated prototypes with both procedures was compared, as well as with simulation. The best prototype on the ENrG's Thin E-Strate was compared with one on Arlon 25N, in terms of radiation properties in an anechoic chamber, and conclusions were drawn.
RESUMO
A novel microwave metamaterial absorber design is introduced along with its manufacturing and characterization. Significant results considering both bandwidth and angular stability are achieved. Parametric analysis and simplified equivalent circuit are provided to give an insight on the key elements influencing the absorber performance. In addition, the constitutive parameters of the effective medium model are obtained and related to the absorber resonant behavior. Moreover, a new thinner and more flexible absorber version, preserving broad bandwidth and angular insensitive performance, is simulated, and an 8 × 8 unit-cells prototype is manufactured and measured for a limited angular margin in an anechoic chamber.
RESUMO
A novel metamaterial absorber design able to operate in the C frequency band is presented, along with an analysis and a method to improve both its bandwidth and its angular stability. Simulation results for a FR4-based design are shown for comparison with existing designs. In addition, a simplified equivalent circuit is provided for a better understanding of the great angular stability and wide bandwidth exhibited by the proposed structure. Moreover, simulations, manufacturing and measurements of a thinner and more flexible metamaterial absorber, keeping the angular stability of the former one, while providing a wide bandwidth, are presented.
