SnO2 Model Electrode Cycled in Li-Ion Battery Reveals the Formation of Li2SnO3 and Li8SnO6 Phases through Conversion Reactions.

SnO2 is an attractive negative electrode for Li-ion battery owing to its high specific charge compared to commercial graphite. However, the various intermediate conversion and alloy reactions taking place during lithiation/delithiation, as well as the electrolyte stability, have not been fully elucidated, and many ambiguities remain. An amorphous SnO2 thin film was investigated for use as a model electrode by a combination of postmortem X-ray photoelectron spectroscopy supported by density functional theory calculations and scanning electron microscopy to shed light on these different processes. The early stages of lithiation reveal the presence of multiple overlapping reactions leading to the formation of Li2SnO3 and Sn0 phases between 2 and 0.8 V vs Li+/Li. Between 0.45 V and 5 mV vs Li+/Li Li8SnO6, Li2O and Li xSn phases are formed. Electrolyte reduction occurs simultaneously in two steps, at 1.4 and 1 V vs Li+/Li, corresponding to the decomposition of the LiPF6 salt and ethylene carbonate/dimethyl carbonate solvents, respectively. Most of the reactions during delithiation are reversible up to 1.5 V vs Li+/Li, with the reappearance of Sn0 accompanied by the decomposition of Li2O. Above 1.5 V vs Li+/Li, Sn0 is partially reoxidized to SnO x. This process tends to limit the conversion reactions in favor of the alloy reaction, as also confirmed by the long-term cycling samples.

Elucidating the Surface Reactions of an Amorphous Si Thin Film as a Model Electrode for Li-Ion Batteries.

We investigated during the first lithiation/delithiation process the electrochemical reaction mechanisms at the surface of 30 nm n-doped amorphous silicon (a-Si) thin film used as a negative model electrode for Li-ion batteries. Usage of thin film allowed us to accurately discern the different reaction mechanisms occurring at the surface by avoiding interference from carbon and binder components. The potential dependency of the evolution of the solid electrolyte interphase (SEI) and the reactions on the a-Si and on the copper current collector were elucidated by coupling galvanostatic cycling with postmortem X-ray photoemission spectroscopy and scanning electron microscopy analyses. Our approach revealed the clear reversibility of lithiation/delithiation in the a-Si and native SiO2 layers; such a reaction for SiO2 has not been previously detected and was considered to be an irreversible process. Quantitative and qualitative analyses of the potential-dependent surface evolution revealed the decomposition products of both the salt (LiPF6) and solvent (dimethyl carbonate/ethylene carbonate), giving insight into the complex SEI formation mechanism on the a-Si film but also underlining the strong influence of "inert" materials such as the role of the current collector in the irreversible charge loss. A model mechanism describing the evolutionary complexity of the a-Si surface during the first galvanostatic cycle is proposed and discussed.