Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 2 de 2
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Water Sci Technol ; 74(12): 2762-2772, 2016 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-27997387

RESUMO

In this study, a composite with magnetic properties has been successfully synthesized by a novel and environmentally friendly route and is applied to Cd(II) adsorption for water decontamination. The quantification of the phases obtained by Rietveld refinement has shown the presence of 84% of Mn3O4 and 16% of Fe3O4. Transmission electron microscopy image shows an aggregate of Mn3O4 nanoparticles without specific orientation and the predominance of octahedral morphology with nanoparticles size estimated around 25-30 nm. The Cd(II) adsorption isotherm is fitted using the Langmuir-Freundlich model. The estimated maximum adsorption capacities of Cd(II) at pH 6 and 7 are similar (0.28 ± 0.02 and 0.31 ± 0.02 mg/m2, respectively). The kinetic results show that the studied system follows the pseudo-second-order model. The Raman results indicate that Cd is being specifically adsorbed by the Mn3O4 in the composite. The hysteresis curve of the composite Mn3O4/Fe3O4 has changed when compared to the pure magnetite; however, the coercive field after the addition of manganese oxide remains unaltered and does not change with a value around 158 Oe. The turbidity tests showed that the magnetic sedimentation was efficient and promising for wastewater treatment in large scale. These materials can be conveniently recovered by magnetic separation, avoiding the filtration steps, which will make easier the solid-liquid separation operation that follows the adsorption process.


Assuntos
Cádmio/isolamento & purificação , Compostos de Manganês/química , Nanocompostos/química , Óxidos/química , Poluentes Químicos da Água/isolamento & purificação , Adsorção , Descontaminação , Cinética , Imãs , Microscopia Eletrônica de Transmissão , Nanopartículas , Águas Residuárias
2.
Artigo em Inglês | MEDLINE | ID: mdl-22612911

RESUMO

Raman and IR spectra were recorded of the As-loaded Mn(3)O(4) magnetic composites obtained from the adsorption studies performed with As(III). XANES results for the composite after As(III) removal tests show that the As adsorbed is at the oxidized arsenic form, As(V). Monodentate and bidentate surface complexes are suggested for arsenic adsorption onto the composite (5-16 mg/g). Precipitation of manganese arsenate is observed for high As loading (35 mg/g).


Assuntos
Arsênio/química , Fenômenos Magnéticos , Compostos de Manganês/química , Óxidos/química , Análise Espectral Raman , Adsorção , Concentração de Íons de Hidrogênio , Espectrofotometria Infravermelho , Temperatura , Espectroscopia por Absorção de Raios X
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...