K-mer applied in Mycobacterium tuberculosis genome cluster analysis.

According to studies carried out, approximately 10 million people developed tuberculosis in 2018. Of this total, 1.5 million people died from the disease. To study the behavior of the genome sequences of Mycobacterium tuberculosis (MTB), the bacterium responsible for the development of tuberculosis (TB), an analysis was performed using k-mers (DNA word frequency). The k values ranged from 1 to 10, because the analysis was performed on the full length of the sequences, where each sequence is composed of approximately 4 million base pairs, k values above 10, the analysis is interrupted, as consequence of the program's capacity. The aim of this work was to verify the formation of the phylogenetic tree in each k-mer analyzed. The results showed the formation of distinct groups in some k-mers analyzed, taking into account the threshold line. However, in all groups, the multidrug-resistant (MDR) and extensively drug-resistant (XDR) strains remained together and separated from the other strains.

Botulinum toxin type A for controlling bruxism assessed with computerized occlusal analysis: A pilot study.

Objective: To assess botulinum toxin-A (BTX-A) on mandibular movements and bite force (BF%) in bruxism.Methods: Ten bruxers were divided into 2 groups based on BF% imbalance (G1: >10%, G2: <10%). BTX-A 140U was total injected into the masseter and temporalis muscles. A T-Scan® recorded BF%, occlusion time (OT), right, left, and protrusive disclusion time (DT) before administering BTX-A, as well as 15, 45, 90, and 120 days after injection.Results: The Friedman and Wilcoxon tests found significant differences in BF% in G1 subjects at 15 days (p = 0.028 s), OT at 90 (p = 0.043 s), and 120 (p = 0.027 s) days, DTR at 90 (p = 0.046 s) and 120 (p = 0.028 s) days, DTL at 15 (p = 0.043 s) and 90 (p = 0.027 s) days, and DTP 45-90 days (p = 0.043 s).Conclusion: BTX-A induced BF% starting at 15 days post-injection and influenced lateralities later.

Suicide cases in developed and emerging countries: an analysis using wavelets / Casos de suicídio em países desenvolvidos e emergentes: uma análise usando ondaletas

OBJECTIVE: The aim of this study was to use a wavelet technique to determine whether the number of suicides is similar between developed and emerging countries. METHODS: Annual data were obtained from World Health Organization (WHO) reports from 1986 to 2015. Discrete nondecimated wavelet transform was used for the analysis, and the Daubechies wavelet function was applied with five-level decomposition. Regarding clustering, energy (variance) was used to analyze the clusters and visualize the clustering process. We constructed a dendrogram using the Mahalanobis distance. The number of groups was set using a specific function in the R program. RESULTS: The cluster analysis verified the formation of four groups as follows: Japan, the United States and Brazil were distinct and isolated groups, and other countries (Austria, Belgium, Chile, Israel, Mexico, Italy and the Netherlands) constituted a single group. CONCLUSION: The methods utilized in this paper enabled a detailed verification of countries with similar behaviors despite very distinct socioeconomic, geographic and climate characteristics.

OBJETIVO: Verificar se existe relação de similaridade entre o número de suicídio em países desenvolvidos e emergentes usando a técnica de ondaletas. MÉTODOS: Os dados anuais foram obtidos a partir do relatório da Organização Mundial da Saúde (OMS), no período de 1986 a 2015. Para análise, foi empregada a transformada discreta não decimada de ondaleta (NDWT), a função ondaleta aplicada foi a Daubechies com cinco níveis de decomposição. Com relação ao agrupamento, utilizou-se a energia (variância) para analisar os clusters e, para a visualização do processo de clusterização, trabalhamos com o dendograma, no qual se empregou a distância de Mahalanobis. A quantidade de grupos foi definida por meio da função NbCluster. RESULTADOS: A partir da análise de cluster, verificou-se a formação de quatros grupos. No qual, Japão e Estados Unidos e Brasil localizam-se em grupos distintos e isolados. E os demais países (Áustria, Bélgica, Chile, Israel, México, Itália e Holanda) em um único grupo. CONCLUSÃO: Utilizando esse método, foi possível verificar com mais detalhes quais países apresentaram comportamentos semelhantes, mesmo apresentando características bem distintas entre si, tanto socioeconômica, geográfica e climática.

In-office bleaching protocols using violet LED: A split mouth case report.

A new LED wavelength, violet LED (VL) with a wavelength between 405 - 410 nm was recently introduced to be used for in-office dental bleaching. In comparison to the blue LED system (440 to 485 nm), the shorter wavelength has more energy carried in its photons and also corresponds to the absorption peak of the stained particles, which lead to whitening utilizing a physical process. Considering the need to suggest and develop new protocols with this new technology, this article reports 2 different dental bleaching protocols developed in a split-mouth model using VL. A 25-year-old male patient was submitted to in-office dental bleaching. On the teeth from the left side, the bleaching gel (35% H2O2) was renewed 3 times (every 8 mins), and on the right side, the gel was maintained without renewal during the bleaching session. The irradiation with Violet LED Light (405 nm ± 10 nm) was performed with the following protocol: 1 min of irradiation with 30 s light off until 8 min of total time. A total of 3 cycles were performed (total time of 24 min). Two bleaching sessions were performed with an interval of 7 days between sessions. Based on the results of this split-mouth case report, there was no visible difference in the final color outcome and sensitivity between both bleaching protocols tested.

3D technology to measure dental arches and create a template for lingual brackets technique.

OBJECTIVE: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. METHODS: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. RESULTS: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. CONCLUSIONS: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.

3D technology to measure dental arches and create a template for lingual brackets technique

ABSTRACT Objective: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. Methods: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. Results: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. Conclusions: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.

RESUMO Objetivo: O presente estudo tem como objetivo encontrar as formas anatômicas e dimensões das arcadas dentárias com base em pontos de referência utilizados na técnica ortodôntica lingual, e criar um diagrama com um maior número de arcos metálicos para serem utilizados na clínica ortodôntica. Métodos: 140 modelos de indivíduos caucasianos com oclusão normal e natural foram digitalizados (3D) e as imagens, analisadas com o software Delcam Power ShapeTM 2010. A determinação das formas e tamanhos das arcadas dentárias foi obtida a partir de 14 pontos selecionados na superfície lingual dos dentes. Outros pontos e segmentos foram utilizados, com o auxílio do software, para definir um diagrama. Resultados: Foram encontrados diferentes tamanhos de arcadas dentárias linguais, tanto para a maxila quanto para a mandíbula. Os menores tamanhos foram os femininos, e os maiores, os masculinos. Definiram-se seis tamanhos para cada sexo, sendo três para a maxila e três para a mandíbula, nomeados como P, M e G. Foi criado um diagrama com dezoito desenhos de arcos linguais anatômicos, nove para a maxila e nove para a mandíbula, para ambos os sexos. Conclusões: A posição dos pontos de referência nesse estudo evidenciou diferenças entre os sexos, o que permitiu a criação de arcos mais compatíveis com as formas e dimensões anatômicas da maxila e mandíbula. A diferença entre os tamanhos das arcadas dentárias linguais possibilitou a criação de um diagrama com formas de arcos metálicos linguais anatômicos para serem utilizados na técnica lingual, para auxiliar o profissional a criar os seus próprios arcos.

Evaluation of Resin-Based Material Containing Copaiba Oleoresin (Copaifera Reticulata Ducke): Biological Effects on the Human Dental Pulp Stem Cells.

The purpose of this study was to analyze in vitro the biological effects on human dental pulp stem cells triggered in response to substances leached or dissolved from two experimental cements for dental pulp capping. The experimental materials, based on extracts from Copaifera reticulata Ducke (COP), were compared to calcium hydroxide [Ca(OH)2] and mineral trioxide aggregate (MTA), materials commonly used for direct dental pulp capping in restorative dentistry. For this, human dental pulp stem cells were exposed to COP associated or not with Ca(OH)2 or MTA. Cell cytocompatibility, migration, and differentiation (mineralized nodule formation (Alizarin red assay) and gene expression (RT-qPCR) of OCN, DSPP, and HSP-27 (genes regulated in biomineralization events)) were evaluated. The results showed that the association of COP reduced the cytotoxicity of Ca(OH)2. Upregulations of the OCN, DSPP, and HSP-27 genes were observed in response to the association of COP to MTA, and the DSPP and HSP-27 genes were upregulated in the Ca(OH)2 + COP group. In up to 24 h, cell migration was significantly enhanced in the MTA + COP and Ca(OH)2 + COP groups. In conclusion, the combination of COP with the currently used materials for dental pulp capping [Ca(OH)2 and MTA] improved the cell activities related to pulp repair (i.e., cytocompatibility, differentiation, mineralization, and migration) including a protective effect against the cytotoxicity of Ca(OH)2.

Evaluation of genome similarities using a wavelet-domain approach.

INTRODUCTION: Tuberculosis is listed among the top 10 causes of deaths worldwide. The resistant strains causing this disease have been considered to be responsible for public health emergencies and health security threats. As stated by the World Health Organization (WHO), around 558,000 different cases coupled with resistance to rifampicin (the most operative first-line drug) have been estimated to date. Therefore, in order to detect the resistant strains using the genomes of Mycobacterium tuberculosis (MTB), we propose a new methodology for the analysis of genomic similarities that associate the different levels of decomposition of the genome (discrete non-decimated wavelet transform) and the Hurst exponent. METHODS: The signals corresponding to the ten analyzed sequences were obtained by assessing GC content, and then these signals were decomposed using the discrete non-decimated wavelet transform along with the Daubechies wavelet with four null moments at five levels of decomposition. The Hurst exponent was calculated at each decomposition level using five different methods. The cluster analysis was performed using the results obtained for the Hurst exponent. RESULTS: The aggregated variance, differenced aggregated variance, and aggregated absolute value methods presented the formation of three groups, whereas the Peng and R/S methods presented the formation of two groups. The aggregated variance method exhibited the best results with respect to the group formation between similar strains. CONCLUSION: The evaluation of Hurst exponent associated with discrete non-decimated wavelet transform can be used as a measure of similarity between genome sequences, thus leading to a refinement in the analysis.

Evaluation of genome similarities using a wavelet-domain approach

Abstract INTRODUCTION: Tuberculosis is listed among the top 10 causes of deaths worldwide. The resistant strains causing this disease have been considered to be responsible for public health emergencies and health security threats. As stated by the World Health Organization (WHO), around 558,000 different cases coupled with resistance to rifampicin (the most operative first-line drug) have been estimated to date. Therefore, in order to detect the resistant strains using the genomes of Mycobacterium tuberculosis (MTB), we propose a new methodology for the analysis of genomic similarities that associate the different levels of decomposition of the genome (discrete non-decimated wavelet transform) and the Hurst exponent. METHODS: The signals corresponding to the ten analyzed sequences were obtained by assessing GC content, and then these signals were decomposed using the discrete non-decimated wavelet transform along with the Daubechies wavelet with four null moments at five levels of decomposition. The Hurst exponent was calculated at each decomposition level using five different methods. The cluster analysis was performed using the results obtained for the Hurst exponent. RESULTS: The aggregated variance, differenced aggregated variance, and aggregated absolute value methods presented the formation of three groups, whereas the Peng and R/S methods presented the formation of two groups. The aggregated variance method exhibited the best results with respect to the group formation between similar strains. CONCLUSION: The evaluation of Hurst exponent associated with discrete non-decimated wavelet transform can be used as a measure of similarity between genome sequences, thus leading to a refinement in the analysis.

Wavelet-domain elastic net for clustering on genomes strains.

We propose to evaluate genome similarity by combining discrete non-decimated wavelet transform (NDWT) and elastic net. The wavelets represent a signal with levels of detail, that is, hidden components are detected by means of the decomposition of this signal, where each level provides a different characteristic. The main feature of the elastic net is the grouping of correlated variables where the number of predictors is greater than the number of observations. The combination of these two methodologies applied in the clustering analysis of the Mycobacterium tuberculosis genome strains proved very effective, being able to identify clusters at each level of decomposition.

Tooth color changes and sensitivity in patients undergoing dental bleaching with 10% hydrogen peroxide using customized trays or strips: a randomized clinical trial.

BACKGROUND: This paper aimed to compare the tooth color changes and sensitivity in patients undergoing dental bleaching with 10% hydrogen peroxide using customized trays or strips as delivering systems. METHODS: A total of 50 patients aged between 18-30 years old were assigned into two groups (N.=25) according to the bleaching treatment: tray (TB) or strips (SB). For both techniques, the patients underwent a 30-minute application of 10% hydrogen peroxide twice a day for seven days. Tooth color was evaluated before, 3 and 7 days of treatment, and 14 days after bleaching using a tooth color shade guide (VITA® shade). Tooth sensitivity was assessed using the Visual Analogue Scale (VAS). The values obtained from the color changes and tooth sensitivity were statistically analyzed (α=5%). RESULTS: For both groups, there was a significant difference on the tooth color before and after bleaching (P<0.001), although there was no significant difference between them (P=0.4215). The SB group exhibited a lower frequency of sensitivity (50.2%) compared to the TB group (70.2%) (P<0.001). However, the highest number of individuals reporting score 1 of sensitivity was found in the SB group (37.3%) compared to the TB group (20.9%) (P<0.001). For the other scores, there were no differences between the SB and TB groups, with results of 9.8% and 8.4% for score 2 (P=0.744) and 2.7% and 0.5% for score 3 (P=0.122). CONCLUSIONS: The bleaching effect of 10% hydrogen peroxide is not influenced by the delivering system (tray or strips). Even though the technique with strips was associated to a lower frequency of dental sensitivity, the peak level of pain was greater when compared to the technique using trays.

Bioactive glass plus laser phototherapy as promise candidates for dentine hypersensitivity treatment.

Treatments for dentine hypersensitivity (DH) may produce positive effects, though do not have lasting results. We investigated the reparative potential of stem cells derived from deciduous teeth (SHEDs) in response to components delivered from substances used in the treatment of the DH, associated or not to laser phototherapy (LPT), to stimulate dentine formation. SHEDs were submitted to substances delivered from a laboratorial P-rich bioactive glass [57SiO2 -26CaO-17P2 O5 (wt %)] or a commercially available desensitizer (Gluma® Desensitizer), associated (or not) to LPT (InGAlP diode laser, 660 nm, 0.028 cm2 , 20 mW, 5 J/cm2 , 7 s, contact mode). Biomaterial characterization was performed by X-ray diffraction, scanning electron microscopy and the particle size was evaluated by dynamic light scattering. SHEDs proliferation and differentiation were analyzed by MTT and Alizarin Red staining, respectively. The conditioned media used in these tests were evaluated regarding their pH and the ionic concentration changes due to ions leached from the bioactive glass (BG). BG majority presented a non-crystalline solid structure and mixed particle sizes characterized by the agglomeration of nanoparticles. Cultures treated with BG alone or in association to LPT showed improved cell growth in relation to Gluma® (p < 0.05). Gluma® was cytotoxic in all tested conditions, regardless irradiated or not. BG associated to LPT induced intense mineral matrix formation. In conclusion, BG releases ionic dissolution products able to promote SHEDs differentiation. BG associated to LPT improves SHEDs proliferation and differentiation in vitro, and may be a promise therapeutic approach for the DH treatment. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 107-116, 2017.

Low-intensity laser phototherapy enhances the proliferation of dental pulp stem cells under nutritional deficiency.

Dental trauma in immature permanent teeth can damage pulp vascularization, which leads to necrosis and cessation of apexogenesis. Studies on tissue engineering using stem cells from human exfoliated deciduous teeth (SHEDs) have yielded promising results. Laser phototherapy (LPT) is able to influence the proliferation and differentiation of these cells, which could improve tissue engineering. SHEDs (eighth passage) were seeded into 96-well culture plates (103 cells/well) and were grown in culture medium supplemented with 15% defined fetal bovine serum (FBS) for 12 h. After determining the appropriate nutrition deficiency status (5% FBS), the cells were assigned into four groups: 1) G1 - 15% FBS (positive control); 2) G2 - 5% FBS (negative control); 3) G3 - 5% FBS+LPT 3 J/cm2; and 4) G4 - 5% FBS+LPT 5 J/cm2. For the LPT groups, two laser irradiations at 6 h intervals were performed using a continuous wave InGaAlP diode laser (660 nm, with a spot size of 0.028 cm2, 10 mW) in punctual and contact mode. Cell viability was assessed via an MTT reduction assay immediately after the second laser irradiation (0 h) and 24, 48, and 72 h later. We found that G3 and G4 presented a significantly higher cell growth rate when compared with G2 (p < 0.01). Moreover, G4 exhibited a similar cell growth rate as G1 throughout the entire experiment (p > 0.05). These findings indicate that LPT with 5 J/cm2 can enhance the growth of SHEDs during situations of nutritional deficiency. Therefore, LPT could be a valuable adjunct treatment in tissue engineering when using stem cells derived from the dental pulp of primary teeth.

Does the hybrid light source (LED/laser) influence temperature variation on the enamel surface during 35% hydrogen peroxide bleaching? A randomized clinical trial.

OBJECTIVE: The present study investigated how a hybrid light source (LED/laser) influences temperature variation on the enamel surfaces during 35% hydrogen peroxide (HP) bleaching. Effects on the whitening effectiveness and tooth sensitivity were analyzed. METHOD AND MATERIALS: Twenty-two volunteers were randomly assigned to two different treatments in a split-mouth experimental model: group 1 (control), 35% HP; group 2 (experimental), 35% HP + LED/laser. Color evaluation was performed before treatment, and 7 and 14 days after completion of bleaching, using a color shade scale. Tooth sensitivity was assessed using a visual analog scale (VAS; before, immediately, and 24 hours after bleaching). During the bleaching treatment, thermocouple channels positioned on the tooth surfaces recorded the temperature. Data on color and temperature changes were subjected to statistical analysis (α = 5%). Tooth sensitivity data were evaluated descriptively. RESULTS: Groups 1 and 2 showed mean temperatures (± standard deviation) of 30.7 ± 1.2 °C and 34.1 ± 1.3 °C, respectively. It was found that there were statistically significant differences between the groups, with group 2 showing higher mean variation (P < .0001). The highest temperature variation occurred for group 2, with an increase of 5.3 °C at the enamel surface. The color change results showed no differences in bleaching between the two treatment groups (P = .177). The variation of the average temperature during the treatments was not statistically associated with color variation (P = .079). Immediately after bleaching, it was found that 36.4% of the subjects in group 2 had mild to moderate sensitivity. In group 1, 45.5% showed moderate sensitivity. In both groups, the sensitivity ceased within 24 hours. CONCLUSION: Hybrid light source (LED/ laser) influences temperature variation on the enamel surface during 35% HP bleaching and is not related to greater tooth sensitivity.

Low-intensity laser phototherapy enhances the proliferation of dental pulp stem cells under nutritional deficiency

Abstract Dental trauma in immature permanent teeth can damage pulp vascularization, which leads to necrosis and cessation of apexogenesis. Studies on tissue engineering using stem cells from human exfoliated deciduous teeth (SHEDs) have yielded promising results. Laser phototherapy (LPT) is able to influence the proliferation and differentiation of these cells, which could improve tissue engineering. SHEDs (eighth passage) were seeded into 96-well culture plates (103 cells/well) and were grown in culture medium supplemented with 15% defined fetal bovine serum (FBS) for 12 h. After determining the appropriate nutrition deficiency status (5% FBS), the cells were assigned into four groups: 1) G1 - 15% FBS (positive control); 2) G2 - 5% FBS (negative control); 3) G3 - 5% FBS+LPT 3 J/cm2; and 4) G4 - 5% FBS+LPT 5 J/cm2. For the LPT groups, two laser irradiations at 6 h intervals were performed using a continuous wave InGaAlP diode laser (660 nm, with a spot size of 0.028 cm2, 10 mW) in punctual and contact mode. Cell viability was assessed via an MTT reduction assay immediately after the second laser irradiation (0 h) and 24, 48, and 72 h later. We found that G3 and G4 presented a significantly higher cell growth rate when compared with G2 (p < 0.01). Moreover, G4 exhibited a similar cell growth rate as G1 throughout the entire experiment (p > 0.05). These findings indicate that LPT with 5 J/cm2 can enhance the growth of SHEDs during situations of nutritional deficiency. Therefore, LPT could be a valuable adjunct treatment in tissue engineering when using stem cells derived from the dental pulp of primary teeth.

Casa preta: uma etnografia de um espaço de sociabilidade da juventude grafiteira de Belém / House black: ethnography of a space of sociability youth graffitt of Belém / Casa negra: una etnografía de un espacio de sociabilidad de la juventud gratitera de Belén

o objetivo desse artigo é apresentar o resultado de uma etnografia sobre a Casa Preta, um dos espaços de sociabilidade da juventude grafiteira de Belém. Essa pesquisa é fruto da dissertação de mestrado em antropologia. A Casa Preta é considerada um espaço cultural de produção do hip hop como de outros movimentos, por exemplo,o Movimento Negro. A metodologia aqui utilizada foram a etnografia, a história de vida e a antropologia visual com observação, entrevistas e depoimentos que possibilitaram conhecer o que levou a formação do Coletivo Casa Preta e a organização da casa enquanto um local de moradia e de arte. A Casa preta como um espaço de arte é um dos espaços onde a juventude grafiteira se reúne se mobiliza e realiza contatos com sua rede de sociabilidade(AU)

the objective of this article is to present the results of ethnography in House Black during the master's degree in anthropology. The House Black is a of the existing cultural spaces in the city of Belém, where sociability between graffitt youth takes place. The same is also regarded as a cultural space by enabling the production of hip hop and aggregate subjects belonging to other social movements, such as the black movement. The methodological tools used were: the ethnographic record, life history, visual anthropology, interviews and testimonials. Knowing and understanding that enabled the formation of collective House and the organization as a place of residence and art. The House Black as an art space is where graffitt mobilizing youth meets and making contacts with its network of sociability.(AU)

el objetivo de este trabajo es presentar los resultados de una etnografía sobre la Casa Negra, uno de los espacios de sociabilidad juvenil que hace grafiteira en Belén. Esta investigación es el resultado de una disertación de maestría en antropología. La Casa Negra es considerada un espacio cultural para la producción de hip hop así como de otros movimientos, por ejemplo, el Movimiento Negro. La metodología utilizada aquí fue la etnografía, la historia de la vida y la antropología visual con observación, entrevistas y testimonios que permitieron conocer lo que llevó a la formación del Colectivo Casa Negra y la organización de la casa como lugar de residencia y de arte. La Casa Negra como un espacio de arte es un espacio donde los jóvenes que hacen grafito se reúnen, se movilizan y realizan contactos con su red de sociabilidad.(AU)

Effect of laser phototherapy in the prevention and treatment of chemo-induced mucositis in hamsters

The aim of this study was to investigate the effect of laser phototherapy (LPT) in the prevention and/or treatment of oral mucositis induced by 5-fluorouracil (5-FU; Eurofarma, São Paulo, Brazil) in hamsters. Ninety-six hamsters were divided into four groups (n = 24): Control (no treatment); Preventive [LPT from day (D) D-5 to D+5]; Therapeutic (LPT from D+5 to D+15); and Combined (preventive plus therapeutic LPT from D-5 to D+15). The animals received an intraperitoneal injection of 5-FU on Days 0 and 2. The pouch mucosa was scratched on Days 3 and 4. The irradiation parameters were: indium-gallium-aluminum-phosphide (InGaAlP) diode laser (MM Optics, São Carlos, Brazil) (660 nm), beam area of 0.036 cm2, 40 mW, 1.11 W/cm2, 6.6 J/cm2, power density applied daily of 39.6 J/cm2, in punctual mode (six points and six seconds per point) and contact mode, one application per day. The animals were sacrificed on Days 0, 5, 10 and 15 (n = 6) and weighed, and the pouch mucosa was removed for histopathological analysis. Clinical and corresponding histological scores were compared using ANOVA and Tukey's test (p ≤0.05). Similar weight losses ranging from 5% to 10% occurred in all groups. The therapeutic group had significantly lower clinical and histological scores than the other groups at Day 10. This study showed that positive effects on oral mucositis management were obtained only when LPT was applied in the therapeutic protocol (from D+5 to D+15 after chemotherapy).

Effect of laser phototherapy in the prevention and treatment of chemo-induced mucositis in hamsters.

The aim of this study was to investigate the effect of laser phototherapy (LPT) in the prevention and/or treatment of oral mucositis induced by 5-fluorouracil (5-FU; Eurofarma, São Paulo, Brazil) in hamsters. Ninety-six hamsters were divided into four groups (n=24): Control (no treatment); Preventive [LPT from day (D) D-5 to D+5]; Therapeutic (LPT from D+5 to D+15); and Combined (preventive plus therapeutic LPT from D-5 to D+15). The animals received an intraperitoneal injection of 5-FU on Days 0 and 2. The pouch mucosa was scratched on Days 3 and 4. The irradiation parameters were: indium-gallium-aluminum-phosphide (InGaAlP) diode laser (MM Optics, São Carlos, Brazil) (660 nm), beam area of 0.036 cm2, 40 mW, 1.11 W/cm2, 6.6 J/cm2, power density applied daily of 39.6 J/cm2, in punctual mode (six points and six seconds per point) and contact mode, one application per day. The animals were sacrificed on Days 0, 5, 10 and 15 (n=6) and weighed, and the pouch mucosa was removed for histopathological analysis. Clinical and corresponding histological scores were compared using ANOVA and Tukey's test (p≤0.05). Similar weight losses ranging from 5% to 10% occurred in all groups. The therapeutic group had significantly lower clinical and histological scores than the other groups at Day 10. This study showed that positive effects on oral mucositis management were obtained only when LPT was applied in the therapeutic protocol (from D+5 to D+15 after chemotherapy).

Prevention and treatment of mice paw edema by near-infrared low-level laser therapy on lymph nodes.

Low-level laser therapy (LLLT) has been demonstrated to modulate inflammatory processes and immunological responses. The aim of this work was to investigate the hypothesis that near infrared LLLT (830 nm) over lymph nodes may reduce paw edema and contribute to the modulation of inflammation. The edema was induced by carrageenan inoculation (CGN) into the plantar surface of 100 male mice left hind paw. Animals were divided into five groups: CGN (control), no treatment; Diclo, sodium diclofenac; Paw, LLLT on the paw; Ly, LLLT on the inguinal lymph nodes; and Paw+Ly, LLLT in both paw and lymph nodes, and subdivided according to moment of irradiation: A-1 h and 2 h before CGN, B-1 h and immediately before CGN, C-1 and 2 h after CGN, and D-3.5 and 4.5 h after CGN. The parameters used were: energy=1 J, fluence=35 J/cm(2), power=100 mW during 10 s. Paw volume was measured before and 1 to 6 h after CGN, and myeloperoxidase (MPO) activity was analyzed. Edema prevention was obtained by the irradiation of Paw+Ly at moment A and at Ly at moment B, inhibition of edema formation was achieved by either Paw or Ly at moment C, and edema treatment was obtained by Paw or Ly at moment D (p<0.05). MPO activity was significantly reduced on Paw at moment A, Paw and Ly on C, and in all irradiated groups on B and D. Our results suggest that LLLT was able to produce both anti-inflammatory and pro-inflammatory effects depending on to the site and moment of irradiation.

Effect of laser phototherapy on wound healing following cerebral ischemia by cryogenic injury.

Laser phototherapy emerges as an alternative or auxiliary therapy for acute ischemic stroke, traumatic brain injury, degenerative brain disease, spinal cord injury, and peripheral nerve regeneration, but its effects are still controversial. We have previously found that laser phototherapy immunomodulates the response to focal brain damage. Following direct cortical cryogenic injury the effects of laser phototherapy on inflammation and repair was assessed after cryogenic injury (CI) to the central nervous system (CNS) of rats. The laser phototherapy was carried out with a 780 nm AlGaAs diode laser. The irradiation parameters were: power of 40 mW, beam area of 0.04 cm(2), energy density of 3 J/cm(2) (3s) in two points (0.12 J per point). Two irradiations were performed at 3 h-intervals, in contact mode. Rats (20 non-irradiated - controls and 20 irradiated) were used. The wound healing in the CNS was followed in 6 h, 1, 7 and 14 days after the last irradiation. The size of the lesions, the neuron cell viability percentages and the amount of positive GFAP labeling were statistically compared by ANOVA complemented by Tukey's test (p<0.05). The distribution of lymphocytes, leukocytes and macrophages were also analyzed. CI created focal lesions in the cortex represented by necrosis, edema, hemorrhage and inflammatory infiltrate. The most striking findings were: lased lesions showed smaller tissue loss than control lesions in 6 h. During the first 24 h the amount of viable neurons was significantly higher in the lased group. There was a remarkable increase in the amount of GFAP in the control group by 14 days. Moreover, the lesions of irradiated animals had fewer leukocytes and lymphocytes in the first 24 h than controls. Considering the experimental conditions of this study it was concluded that laser phototherapy exerts its effect in wound healing following CI by controlling the brain damage, preventing neuron death and severe astrogliosis that could indicate the possibility of a better clinical outcome.