Fractionation of the organic matter contained in leachate resulting from two modes of landfilling: an indicator of waste degradation.

Three experimental pilots were set up at the semi-industrial scale to assess the impact of leachate recirculation and Mechanical Biological Pre-treatment (MBP) before landfilling on the biological degradation of landfilled wastes. The organic matter contained in leachates resulting from these pilots has been used as an indicator of waste degradation. Fractionations were carried out (i) using XAD resins in order to divide the organic matter into several fractions according to the hydrophobic character of the molecules and (ii) using an ultrafiltration protocol to divide the organic matter into several fractions according to the apparent molecular weight of molecules. Three phases of degradation are determined according to the distribution of the organic matter and according to the humification rate. The humification process seems to be more rapid for MBP leachates than for Bioreactor leachate. These results were confirmed by the ultrafiltration results indicating that, to date, MBP leachates contain more molecules with a high molecular weight than Bioreactor leachate. However, this could be explained by an interruption of waste degradation due to an accumulation of volatile fatty acids.

Leachate recirculation effects on waste degradation: study on columns.

The purpose of this study is to determine the impact of leachate recirculation on the degradation of municipal solid wastes (bioreactor concept). The study was carried out using columns containing approximately 50 kg of waste, in order to follow waste degradation over a limited time. Three types of waste were studied: fresh waste of standard composition, fresh waste of fermentable composition and some 8-yr-old waste extracted from a site in France. Measurement of the global parameters, such as chemical oxygen demand (COD), volatile acidity, alkalinity, leachate conductivity, methane potential of the wastes and biogas production monitoring (volume of CO2 and CH4 produced), were carried out. The quantity of oxydizable matter and biogas production was increased by the leachate recirculation, and the duration of the first degradation phases was reduced in all cases. Chloride, ammonium and organic pollution accumulation was observed according to the duration of recirculation. After 400 days of degradation, waste stabilization seemed to be reached for all of the recirculated columns (COD<300 mg/L O2, and methane potential reached).

Indicating the parameters of the state of degradation of municipal solid waste.

This study related to the analysis of the physical (granulometry and composition) and chemical (organic matter, organic carbon and nitrogen contents) characteristics, as well as those relating to release (leaching tests and determining the methanogene potential) of several domestic wastes, with an aim of evaluating stabilization indicators. Values thresholds for a known stabilized waste were thus deduced by correlation (% paper-cardboard = 0-1; % volatile solid (VS) = 18-19; % OC = 5-6; % fines = 44-45; % degraded components = 75-76, COD of leachate = 141-155 mg O2/L; DOC from leachate = 45-49 mg C/L and 0.9-1 m3 CH4/t of dry waste). However, these values thresholds remain specific to the method employed for the analyses. The results obtained represent a considerable advance in the definition of a waste stabilized state and propose the importance of certain parameters, such as the paper-cardboard content and the measurement of leachates by using the SUVA index for determining a stabilization state.

Cathodic dissolution in the electrocoagulation process using aluminium electrodes.

All the authors working with aluminium electrodes in the electrocoagulation process have shown that a dissolution occurs at the cathode. This result cannot be explained by the electrochemical process in which only the anodes should be dissolved. The most probable reaction is a chemical attack by hydroxyl ions (generated during water reduction) on the aluminium cathode but nobody has proved it in the framework of the electrocoagulation process. So we are interested in determining what kind of reactions occurs at the cathode. For that, we have elaborated a batch pilot apparatus divided into two compartments, allowing measurement of gas formation taking place only in one compartment. The gases measurements were performed by mass spectrometry with helium as carrier gas. To validate our experimental protocol, the first experiments have been done with a stainless steel cathode: in this case, the results have indicated that the amount of created hydrogen is in good agreement with the values calculated using the second Faraday's law. The experiments realised with an aluminium cathode have shown that the hydrogen formation, in these conditions, was higher than those observed with the stainless steel cathode. All our investigations enable us to propose that with an aluminium cathode, hydrogen formation can be separated into two phenomena. The first one is due to an electrochemical reaction (water reduction), and the second one arises from a chemical reaction explaining the dissolution observed at the cathode.