Validation of the recycled backfill material for the landslide stabilization at a railway line.

In mountain areas landslides many times endanger safety of transport infrastructures, and these must be stabilized with retaining wall structures. In this paper the validation of a new composite as a backfill material for landslide stabilization with a large scale demo retaining wall is presented. The new composite was made from residues of paper industry, which uses for its production deinking process. New composite was validated with the laboratory tests, construction of small demo sites and at the end with a large demo retaining wall structure with a length of 50 m. It was concluded that the paper sludge ash and the paper sludge are in proportion 70:30, compacted on the optimal water content and maximum dry density, reached sufficient uniaxial compressive and shear strength. However, the composite's hydration processes required the definition of an optimal time between the composite mixing and installation. In 2019, the retaining wall structure from the new composite was successfully built. The large demo structure is an example of the knowledge transfer from the laboratory to the construction site, in which composite and installing technology could be verified.

Valorized deinking paper residue as fill material for geotechnical structures.

This study introduces a novel geotechnical composite material comprising two types of fill material sourced from the paper industry-deinking paper sludge ash (DPSA) and deinking paper sludge (DPS). Five composites with different DPSA and DPS contents were investigated. Two composites were selected for further analyses. The technology and procedure for composite installation were implemented in field tests. The composites with 80% and 70% DPSA exhibited the elasticity required to withstand minor landslide slip deformations, in addition to achieving sufficiently high values of uniaxial compressive strength. The composites had a low maximum dry density value, which led to fewer settlements in the entire support structure. The enhanced shear characteristics can enable the construction of a thinner retaining wall. The delay between preparation and installation of the composites was further investigated. The field tests confirmed that the composites with 80% and 70% DPSA can be installed on the construction site 4 h and even 24 h after mixing. In 2018, a retaining wall structure with 70% DPSA and 30% DPS was successfully implemented near a railway line using conventional technology as followed-up research to the herein presented study. Results have been derived from work performed in the scope of the H2020 Paperchain project in which novel circular economy models centered on the valorization of the waste streams generated by the pulp and paper industry as secondary raw material for several resource-intensive sectors, including the construction sector, have been developed. Environmental benefits are savings in natural raw materials, reduction of landfill disposal as well as CO2 emission reduction.