Proton and Deuterium NMR Study of the CBC9CB Dimer System.

Using proton and deuterium NMR spectroscopy, this work provides a description of the molecular orientational order of the mesogenic groups in both the Ntb and the classical nematic phase (N) of the liquid crystal dimer CB-C9-CB. The proton NMR data were collected at high field (7 T) with the nematic domains aligned by the field. Deuterium NMR data obtained from aligned samples at 11.7 T, published by Hoffmann , A. Soft Matter 2015 , 11 , 850 , were also considered in this study. Using the first-order perturbation theory, we carried out detailed simulations of the proton spectra from the terminal mesogenic groups along with the quadrupolar splittings from the carbon-deuterium bonds in the first chain positions, which allow for the determination of the Saupe order tensor for the mesogenic groups. We show that the main mechanism that induces the change of the 1H NMR spectrum and the quadrupolar splittings at the N-Ntb phase transition is the change of the orientation of the most ordered molecular frame (eigenframe of the Saupe tensor), along with the onset of the molecular biaxiality parameter, D. This orientation change is associated with the achiral symmetry breaking at the N-Ntb phase transition.

Micro- and nanofibers and liquid crystals for light-scattering shutters: simulation of electro-optical properties.

This work demonstrates the feasibility of using polymeric micro- and nanofiber-composed films and liquid crystals as electrically switchable scattering light shutters. We present a concept of electro-optic device based on an innovative combination of two mature technologies: optics of nematic liquid crystals and electrospinning of nanofibers. These devices have electric and optical characteristics far superior to other comparable methods. The simulation presented shows results that are highly consistent with those of experiments and that explain the working mechanism of the devices.

Capacitance and optical studies of elastic and dielectric properties in an organosiloxane tetrapode exhibiting a N(B) phase.

Biaxial (N(B)) and uniaxial nematic (N(U)) phase behavior was detected and confirmed for an organosiloxane tetrapode material using capacitance and birefringence measurements. Elastic constants, permittivities at two distinct low frequencies, and birefringencies were determined as a function of temperature over both the N(U) and the N(B) phase ranges. The N(U)-N(B) transition is clearly observed in the birefringencies and conoscopy data. A temperature dependent cross-over frequency is also detected in this material for the permittivities, allowing the electrical switching of both planar and homeotropic aligned samples.

Deuterium NMR study of mobility and fluctuations in nematic and isotropic elastomers.

Orientational ordering in polydomain nematic and isotropic elastomers with identical polysiloxane backbone and different deuterium-labeled side groups is studied by D-NMR. In the nematic elastomer the orientational order parameter grows in a critical fashion on crossing the I-N transition implying a continuous phase transition driven by critical fluctuations of local director. The orientational (nematic) ordering occurs on the background of the polymer dynamics exhibited by the backbone, which is similar in the nematic and the analogous isotropic elastomers. The temperature dependence of NMR linewidths is compatible with a Vogel-Fulcher glassy dynamics.

The influence of the preparation methods on the inclusion of model drugs in a beta-cyclodextrin cavity.

The work aims to prove the complexation of two model drugs (ibuprofen, IB and indomethacin, IN) by beta-cyclodextrin (betaCD), and the effect of water in such a process, and makes a comparison of their complexation yields. Two methods were considered: kneading of a binary mixture of the drug, betaCD, and inclusion of either IB or IN in aqueous solutions of betaCD. In the latter method water was removed by air stream, spray-drying and freeze-drying. To prove the formation of complexes in final products, optical microscopy, UV spectroscopy, IR spectroscopy, DSC, X-ray and NMR were considered. Each powder was added to an acidic solution (pH=2) to quantify the concentration of the drug inside betaCD cavity. Other media (pH=5 and 7) were used to prove the existence of drug not complexed in each powder, as the drugs solubility increases with the pH. It was observed that complexation occurred in all powders, and that the fraction of drug inside the betaCD did not depend neither on the method of complexation nor on the processes of drying considered.

Biaxial nematic order and phase behavior studies in an organosiloxane tetrapode using complementary deuterium NMR experiments.

The biaxial nematic phase was recently observed in different thermotropic liquid crystals, namely bent-core compounds, side-chain polymers, bent-core dimers, and organosiloxane tetrapodes. In this work, a series of experiments with a nematic organosiloxane tetrapode where nuclear magnetic resonance (NMR) spectra are collected while the sample is continuously rotating around an axis perpendicular to the magnetic field, are discussed in conjunction with the analysis of a deuterium NMR experiment on the same system reported earlier. The sample used is a mixture of a deuterated probe with the tetrapode. The mixture exhibits a nematic range between -40 degrees C and 37 degrees C. The results of the two independent, but complementary deuterium NMR experiments confirm the existence of a biaxial nematic phase for temperatures below 0 degrees C with high values of the asymmetry parameter at low temperatures. The presence of slow movements of the tetrapode mesogenic units in the low-temperature regime could also be detected through the analysis of the NMR spectra. Simulations indicate that these movements are mainly slow molecular reorientations of the mesogenic units associated with the presence of collective modes in the nematic phases of this compound. In the case of tetrapodes, recent investigations attribute the origin of biaxiality to the hindering of reorientations of the laterally attached mesogenic units which constitute the tetrapode. This study relates the molecular movements with the nematic biaxial ordering of the system.

Study of micro and nano surface structures from UV irradiated urethane/urea elastomers.

In this work we address new results obtained with a thin free standing flexible film (approximately 120 microm) of a urethane/urea copolymer related to the formation of micro and nano size structures [M.H. Godinho, A.C. Trindade, J.L. Figueirinhas, L.V. Melo, P. Brogueira, Synthetic Metals, 147(1-3), 209 (2004); M.H. Godinho, A.C. Trindade, J.L. Figueirinhas, L.V. Melo, P. Brogueira, Molecular Crystals and Liquid Crystals (2005)]. The copolymer was synthesized from a polypropylene oxide-based prepolymer with three isocyanate terminal groups (PU) and polybutadienediol (PBDO) with PBDO content of 40% wt. After casting and curing the film was cut into different samples and each exposed to UV radiation for different periods of time; 23, 25, 26, 31 and 49 h (lambda=254 nm) and later extracted with toluene and dried. The dried films were then studied by polarising optical microscopy (POM), small angle light scattering (SALS) and the surfaces exposed to UV radiation analyzed by means of atomic force microscopy (AFM). Before extraction with toluene a nanometer-flat surface, characterized by a mean roughness value Ra=0.59 nm, was obtained. Depending on exposure time to UV radiation and after extraction with toluene a corrugated surface, with features mum-sized in all axes, resulting in an increase of the overall mean roughness value to Ra=50.7 nm, starts to develop after 25 h of exposure time. This work gives evidence of the non-monotonous time behavior of the wrinkled surface growth that develops under the action of ultraviolet radiation. As the exposure time increases the free-standing films directly exposed surfaces show a decreasing density of the structures observed and an increasing characteristic peak-to-valley height. The peak-to-valley height measured for samples exposed for 23, 25, 26, 31 and 49 h, respectively 193, 383, 381, 1550 and 2039 nm and the corresponding mean roughness values are Ra=50.7 nm, 105.4, 116.8, 438.3 and 515.4 nm, respectively. Between 26 and 31 h exposure time a leap in both values, peak-to-valley and Ra, was observed. The sudden increase in these values is correlated to fabrication of wrinkles by uniaxially stretching PU/PBDO elastomer films.

Tuneable micro- and nano-periodic structures in a free-standing flexible urethane/urea elastomer film.

We have studied the control and manipulation of tuneable equilibrium structures in a free-standing urethane/urea elastomer film by means of atomic force microscopy, small-angle light scattering and polarising optical microscopy. The urethane/urea elastomer was prepared by reacting a poly(propyleneoxide)-based triisocyanate-terminated prepolymer (PU) with poly(butadienediol) (PBDO), with a weight ratio of 60% PU/40% PBDO. An elastomer film was shear-cast onto a glass plate and allowed to cure, first in an oven, then in air. Latent micro- and nano-periodic patterns are induced by ultra-violet (UV) irradiation of the film and can be "developed" by applying a plane uniaxial stress or by immersing the elastomer in an appropriate solvent and then drying it. For this elastomer we describe six pattern states, how they are related and how they can be manipulated. The morphological features of the UV-exposed film surface can be tuned, reproducibly and reversibly, by switching the direction of the applied mechanical field. Elastomers extracted in toluene exhibit different surface patterns depending upon the state in which they were developed. Stress-strain data collected for the films before and after UV irradiation reveal anisotropy induced by the shear-casting conditions and enhanced by the mechanical field. We have interpreted our results by assuming the film to consist of a thin, stiff surface layer ("skin") lying atop a thicker, softer substrate ("bulk"). The skin's higher stiffness is hypothesised to be due to the more extensive cross-linking of chains located near the surface by the UV radiation. Patterns would thus arise as a competition between the effects of bending the skin and stretching/compressing the bulk, as in the work of Cerda and Mahadevan (Phys. Rev. Lett. 90, 074302 (2003)). We present some preliminary results of a simulation of this model using the Finite Element package ABAQUS.

Deuterium NMR investigation of the biaxial nematic phase in an organosiloxane tetrapode.

Deuterium NMR is used to examine the molecular order exhibited by an organosiloxane tetrapode giving the first experimental evidence, using a bulk sample, for the existence of a biaxial nematic phase in this type of compounds. The temperature dependence of the averaged quadrupolar coupling constant and asymmetry parameter was determined in the compound's nematic phase. Two distinct regimes could be identified, one with a vanishing asymmetry parameter corresponding to a uniaxial nematic phase and another with a significant temperature dependent asymmetry parameter, corresponding to a biaxial nematic phase. The high values obtained for the asymmetry parameter at the lower end of the nematic range are well above experimental error and constitute a definite proof of the biaxial nature of the nematic phase exhibited by the studied compound for those temperatures.

Fréedericksz transition thresholds in pretilted nematic slabs.

The appearance of periodically distorted director structures in pretilted nematic slabs with rigid boundary conditions above the Fréedericksz transition is determined as a function of the Frank elastic constant ratios K(2)/K(1), K(3)/K(1), and the pretilt angle. It is found that the periodically distorted state can be reached either directly from the undistorted state on increasing the magnetic field or indirectly through the homogeneously distorted state. A new threshold field for the transition undistorted state, homogeneously distorted state was found for specific ranges of the Frank elastic constant ratios K(2)/K(1), K(3)/K(1), and the pretilt angle.