All-optical free-space routing of upconverted light by metasurfaces via nonlinear interferometry.

All-optical modulation yields the promise of high-speed information processing. In this field, metasurfaces are rapidly gaining traction as ultrathin multifunctional platforms for light management. Among the featured functionalities, they enable light-wavefront manipulation and more recently demonstrated the ability to perform light-by-light manipulation through nonlinear optical processes. Here, by employing a nonlinear periodic metasurface, we demonstrate the all-optical routing of telecom photons upconverted to the visible range. This is achieved via the interference between two frequency-degenerate upconversion processes, namely, third-harmonic and sum-frequency generation, stemming from the interaction of a pump pulse with its frequency-doubled replica. By tuning the relative phase and polarization between these two pump beams, we route the upconverted signal among the diffraction orders of the metasurface with a modulation efficiency of up to 90%. This can be achieved by concurrently engineering the nonlinear emission of the individual elements (meta-atoms) of the metasurface along with its pitch. Owing to the phase control and ultrafast dynamics of the underlying nonlinear processes, free-space all-optical routing could be potentially performed at rates close to the employed optical frequencies divided by the quality factor of the optical resonances at play. Our approach adds a further twist to optical interferometry, which is a key enabling technique employed in a wide range of applications, such as homodyne detection, radar interferometry, light detection and ranging technology, gravitational-wave detection and molecular photometry. In particular, the nonlinear character of light upconversion combined with phase sensitivity is extremely appealing for enhanced imaging and biosensing.

Nonlinear THz Generation through Optical Rectification Enhanced by Phonon-Polaritons in Lithium Niobate Thin Films.

We investigate nonlinear THz generation from lithium niobate films and crystals of different thicknesses by optical rectification of near-infrared femtosecond pulses. A comparison between numerical studies and polarization-resolved measurements of the generated THz signal reveals a 2 orders of magnitude enhancement in the nonlinear response compared to optical frequencies. We show that this enhancement is due to optical phonon modes at 4.5 and 7.45 THz and is most pronounced for films thinner than 2 µm where optical-to-THz conversion is not limited by self-absorption. These results shed new light on the employment of thin film lithium niobate platforms for the development of new integrated broadband THz emitters and detectors. This may also open the door for further control (e.g., polarization, directivity, and spectral selectivity) of the process in nanophotonic structures, such as nanowires and metasurfaces, realized in the thin film platform. We illustrate this potential by numerically investigating optical-to-THz conversion driven by localized surface phonon-polariton resonances in sub-wavelength lithium niobate rods.

Fully Integrated Silicon Photonic Erbium-Doped Nanodiode for Few Photon Emission at Telecom Wavelengths.

Recent advancements in quantum key distribution (QKD) protocols opened the chance to exploit nonlaser sources for their implementation. A possible solution might consist in erbium-doped light emitting diodes (LEDs), which are able to produce photons in the third communication window, with a wavelength around 1550 nm. Here, we present silicon LEDs based on the electroluminescence of Er:O complexes in Si. Such sources are fabricated with a fully-compatible CMOS process on a 220 nm-thick silicon-on-insulator (SOI) wafer, the common standard in silicon photonics. The implantation depth is tuned to match the center of the silicon layer. The erbium and oxygen co-doping ratio is tuned to optimize the electroluminescence signal. We fabricate a batch of Er:O diodes with surface areas ranging from 1 µm × 1 µm to 50 µm × 50 µm emitting 1550 nm photons at room temperature. We demonstrate emission rates around 5 × 106 photons/s for a 1 µm × 1 µm device at room temperature using superconducting nanowire detectors cooled at 0.8 K. The demonstration of Er:O diodes integrated in the 220 nm SOI platform paves the way towards the creation of integrated silicon photon sources suitable for arbitrary-statistic-tolerant QKD protocols.

A virtual reality classroom to teach and explore crystal solid state structures.

We present an educational application of virtual reality that we created to help students gain an in-depth understanding of the internal structure of crystals and related key concepts. Teachers can use it to give lectures to small groups (10-15) of students in a shared virtual environment, both remotely (with teacher and students in different locations) and locally (while sharing the same physical space). Lectures can be recorded, stored in an online repository, and shared with students who can either review a recorded lecture in the same virtual environment or can use the application for self-studying by exploring a large collection of available crystal structures. We validated our application with human subjects receiving positive feedback. Supplementary Information: The online version contains supplementary material available at 10.1007/s11042-022-13410-0https://doi.org/10.1007/s11042-022-13410-0.

Self-assembly of C60 on a ZnTPP/Fe(001)-p(1 × 1)O substrate: observation of a quasi-freestanding C60 monolayer.

Fullerene (C60) has been deposited in ultrahigh vacuum on top of a zinc tetraphenylporphyrin (ZnTPP) monolayer self-assembled on a Fe(001)-p(1 × 1)O substrate. The nanoscale morphology and the electronic properties of the C60/ZnTPP/Fe(001)-p(1 × 1)O heterostructure have been investigated by scanning tunneling microscopy/spectroscopy and ultraviolet photoemission spectroscopy. C60 nucleates compact and well-ordered hexagonal domains on top of the ZnTPP buffer layer, suggesting a high surface diffusivity of C60 and a weak coupling between the overlayer and the substrate. Accordingly, work function measurements reveal a negligible charge transfer at the C60/ZnTPP interface. Finally, the difference between the energy of the lowest unoccupied molecular orbital (LUMO) and that of the highest occupied molecular orbital (HOMO) measured on C60 is about 3.75 eV, a value remarkably higher than those found in fullerene films stabilized directly on metal surfaces. Our results unveil a model system that could be useful in applications in which a quasi-freestanding monolayer of C60 interfaced with a metallic electrode is required.

Liquid-Phase Exfoliation of Bismuth Telluride Iodide (BiTeI): Structural and Optical Properties of Single-/Few-Layer Flakes.

Bismuth telluride halides (BiTeX) are Rashba-type crystals with several potential applications ranging from spintronics and nonlinear optics to energy. Their layered structures and low cleavage energies allow their production in a two-dimensional form, opening the path to miniaturized device concepts. The possibility to exfoliate bulk BiTeX crystals in the liquid represents a useful tool to formulate a large variety of functional inks for large-scale and cost-effective device manufacturing. Nevertheless, the exfoliation of BiTeI by means of mechanical and electrochemical exfoliation proved to be challenging. In this work, we report the first ultrasonication-assisted liquid-phase exfoliation (LPE) of BiTeI crystals. By screening solvents with different surface tension and Hildebrandt parameters, we maximize the exfoliation efficiency by minimizing the Gibbs free energy of the mixture solvent/BiTeI crystal. The most effective solvents for the BiTeI exfoliation have a surface tension close to 28 mN m-1 and a Hildebrandt parameter between 19 and 25 MPa0.5. The morphological, structural, and chemical properties of the LPE-produced single-/few-layer BiTeI flakes (average thickness of ∼3 nm) are evaluated through microscopic and optical characterizations, confirming their crystallinity. Second-harmonic generation measurements confirm the non-centrosymmetric structure of both bulk and exfoliated materials, revealing a large nonlinear optical response of BiTeI flakes due to the presence of strong quantum confinement effects and the absence of typical phase-matching requirements encountered in bulk nonlinear crystals. We estimated a second-order nonlinearity at 0.8 eV of |χ(2)| ∼ 1 nm V-1, which is 10 times larger than in bulk BiTeI crystals and is of the same order of magnitude as in other semiconducting monolayers (e.g., MoS2).

Tailoring Third-Harmonic Diffraction Efficiency by Hybrid Modes in High-Q Metasurfaces.

Metasurfaces are versatile tools for manipulating light; however, they have received little attention as devices for the efficient control of nonlinearly diffracted light. Here, we demonstrate nonlinear wavefront control through third-harmonic generation (THG) beaming into diffraction orders with efficiency tuned by excitation of hybrid Mie-quasi-bound states in the continuum (BIC) modes in a silicon metasurface. Simultaneous excitation of the high-Q collective Mie-type modes and quasi-BIC modes leads to their hybridization and results in a local electric field redistribution. We probe the hybrid mode by measuring far-field patterns of THG and observe the strong switching between (0,-1) and (-1,0) THG diffraction orders from 1:6 for off-resonant excitation to 129:1 for the hybrid mode excitation, showing tremendous contrast in controlling the nonlinear diffraction patterns. Our results pave the way to the realization of metasurfaces for novel light sources, telecommunications, and quantum photonics.

Ultrafast, All Optically Reconfigurable, Nonlinear Nanoantenna.

The enhancement of nonlinear optical effects via nanoscale engineering is a hot topic of research. Optical nanoantennas increase light-matter interaction and provide, simultaneously, a high throughput of the generated harmonics in the scattered light. However, nanoscale nonlinear optics has dealt so far with static or quasi-static configurations, whereas advanced applications would strongly benefit from high-speed reconfigurable nonlinear nanophotonic devices. Here we propose and experimentally demonstrate ultrafast all-optical modulation of the second harmonic (SH) from a single nanoantenna. Our design is based on a subwavelength AlGaAs nanopillar driven by a control femtosecond light pulse in the visible range. The control pulse photoinjects free carriers in the nanostructure, which in turn induce dramatic permittivity changes at the band edge of the semiconductor. This results in an efficient modulation of the SH signal generated at 775 nm by a second femtosecond pulse at the 1.55 µm telecommunications (telecom) wavelength. Our results can lead to the development of ultrafast, all optically reconfigurable, nonlinear nanophotonic devices for a broad class of telecom and sensing applications.

Third-harmonic light polarization control in magnetically resonant silicon metasurfaces.

Nonlinear metasurfaces have become prominent tools for controlling and engineering light at the nanoscale. Usually, the polarization of the total generated third harmonic is studied. However, diffraction orders may present different polarizations. Here, we design an high quality factor silicon metasurface for third harmonic generation and perform back focal plane imaging of the diffraction orders, which present a rich variety of polarization states. Our results demonstrate the possibility of tailoring the polarization of the generated nonlinear diffraction orders paving the way to a higher degree of wavefront control.

Optical tuning of dielectric nanoantennas for thermo-optically reconfigurable nonlinear metasurfaces.

We demonstrate optically tunable control of second-harmonic generation in all-dielectric nanoantennas: by using a control beam that is absorbed by the nanoresonator, we thermo-optically change the refractive index of the radiating element to modulate the amplitude of the second-harmonic signal. For a moderate temperature increase of roughly 40 K, modulation of the efficiency up to 60% is demonstrated; this large tunability of the single meta-atom response paves the way to exciting avenues for reconfigurable homogeneous and heterogeneous metasurfaces.

Steering and Encoding the Polarization of the Second Harmonic in the Visible with a Monolithic LiNbO3 Metasurface.

Nonlinear metasurfaces constitute a key asset in meta-optics, given their ability to scale down nonlinear optics to sub-micrometer thicknesses. To date, nonlinear metasurfaces have been mainly realized using narrow band gap semiconductors, with operation limited to the near-infrared range. Nonlinear meta-optics in the visible range can be realized using transparent materials with high refractive index, such as lithium niobate (LiNbO3). Yet, efficient operation in this strategic spectral window has been so far prevented by the nanofabrication challenges associated with LiNbO3, which considerably limit the aspect ratio and minimum size of the nanostructures (i.e., meta-atoms). Here we demonstrate the first monolithic nonlinear periodic metasurface based on LiNbO3 and operating in the visible range. Realized through ion beam milling, our metasurface features a second-harmonic (SH) conversion efficiency of 2.40 × 10-8 at a pump intensity as low as 0.5 GW/cm2. By tuning the pump polarization, we demonstrate efficient steering and polarization encoding into narrow SH diffraction orders, opening novel opportunities for polarization-encoded nonlinear meta-optics.

An In-Depth Assessment of the Electronic and Magnetic Properties of a Highly Ordered Hybrid Interface: The Case of Nickel Tetra-Phenyl-Porphyrins on Fe(001)-p(1 × 1)O.

In this paper we focus on the structural, electronic, and magnetic properties of Ni tetra-phenyl-porphyrins (NiTPP) grown on top of Fe(001)-p(1 × 1)O. Ordered thin films of metal TPP molecules are potentially interesting for organic electronic and spintronic applications, especially when they are coupled to a ferromagnetic substrate. Unfortunately, porphyrin layers deposited on top of ferromagnetic substrates do not generally show long-range order. In this work, we provide evidence of an ordered disposition of the organic film above the iron surface and we prove that the thin layer of iron oxide decouples the molecules from the substrate, thus preserving the molecular electronic features, especially the HOMO-LUMO gap, even when just a few organic layers are deposited. The effect of the exposure to molecular oxygen is also investigated and an increased robustness against oxidation with respect to the bare substrate is detected. Finally, we present our results for the magnetic analysis performed by spin resolved spectroscopy, finding a null magnetic coupling between the molecules and the substrate.

Phonon-Mediated Interlayer Charge Separation and Recombination in a MoSe2/WSe2 Heterostructure.

Monolayer transition metal dichalcogenides bear great potential for photodetection and light harvesting due to high absorption coefficients. However, these applications require dissociation of strongly bound photogenerated excitons. The dissociation can be achieved by vertically stacking different monolayers to realize band alignment that favors interlayer charge transfer. In such heterostructures, the reported recombination times vary strongly, and the charge separation and recombination mechanisms remain elusive. We use two color pump-probe microscopy to demonstrate that the charge separation in a MoSe2/WSe2 heterostructure is ultrafast (∼200 fs) and virtually temperature independent, whereas the recombination accelerates strongly with temperature. Ab initio quantum dynamics simulations rationalize the experiments, indicating that the charge separation is temperature-independent because it is barrierless, involves dense acceptor states, and is promoted by higher-frequency out-of-plane vibrations. The strong temperature dependence of the recombination, on the other hand, arises from a transient indirect-to-direct bandgap modulation by low-frequency shear and layer breathing motions.

Observation of a Metastable Honeycomb Arrangement of C60 on Ni(111) with (7 × 7) Periodicity: Tailoring an Interface for Organic Spintronics.

Hybrid nanostructures in which organic molecules are interfaced with metal surfaces hold promise for the discovery of intriguing physical and chemical phenomena, as well as for the development of innovative devices. In this frame, it is crucial to understand the interplay between the structural details of the interface and the electronic properties of the system. Here, an experimental investigation of the C60/Ni(111) interface is performed by means of scanning tunneling microscopy/spectroscopy (STM/STS) and low-energy electron diffraction (LEED). The deposition of C60 at room temperature, followed by high-temperature annealing, promotes the stabilization of two different phases. A hitherto unreported phase forming a (7 × 7) honeycomb overlayer coexists with the well-known (4 × 4) reconstruction. Highly resolved STM images disclose the adsorption geometry of the molecules for both phases. STS reveals that the electronic properties of C60/Ni(111) are strongly influenced by the morphology of the interface, suggesting the possibility of tuning the electronic properties of the organic/inorganic heterostructures by adjusting the structural coupling with the substrate. This achievement can be important for hybrid magnetic interfaces, where the harmonization between the molecular and the magnetic orders can enhance the development of hybrid magnetic states.

Switching the second harmonic generation by a dielectric metasurface via tunable liquid crystal.

Optical modulators are key ingredients in optoelectronics applications ranging from energy harvesting, sensor and imaging devices. In this framework, nonlinear photon conversion mechanisms constitute an attractive opportunity to add logic capabilities to these apparatuses. Here, we investigate the directionality of the emitted second harmonic signal generated in a dielectric metasurface consisting of AlGaAs nanocylinders embedded into a liquid crystal matrix. We numerically demonstrate that, by switching the liquid crystal orientation with a realistic voltage bias, it is possible to modulate the total power and the emission pattern of the SH signal coming from the proposed metasurface. Our results open important opportunities for tunable metadevices such as nonlinear holograms and dynamic displays.

3-dimensional nucleation of Fe oxide induced by a graphene buffer layer.

Shaping the morphology of oxide nanolayers is of paramount importance in tailoring their physical and chemical properties. Here, the influence of a two dimensional graphene buffer layer on the growth of Fe oxide has been investigated by comparing the oxide deposition on a Ni(111) and a graphene/Ni(111) substrate. Scanning tunneling microscopy images acquired at a mesoscopic scale indicate that Fe oxide grows layer-by-layer on the bare Ni(111) surface, while the nucleation of three-dimensional clusters is induced by graphene. Atomically resolved images reveal that Fe oxide adopts an in-plane lattice constant similar to that of the FeO(111) surface when deposited on Ni(111) and graphene/Ni(111), indicating in both cases, a weak interaction between the overlayer and the substrate. Accordingly, it is suggested that the different growth mode is mainly driven by the graphene-induced lowering of the substrate surface free energy.

Evidence of Cascaded Third-Harmonic Generation in Noncentrosymmetric Gold Nanoantennas.

The optimization of nonlinear optical processes on the nanoscale is a crucial step for the integration of complex functionalities into compact photonic devices and metasurfaces. In such systems, photon upconversion can be achieved with higher efficiencies via third-order processes, such as third-harmonic generation (THG), thanks to the resonantly enhanced volume currents. Conversely, second-order processes, such as second-harmonic generation (SHG), are often inhibited by the symmetry of metal lattices and of common nanoantenna geometries. SHG and THG processes in plasmonic nanostructures are generally treated independently because they typically represent small perturbations in the light-matter interaction mechanisms. In this work, we demonstrate that this paradigm does not hold for plasmon-enhanced nonlinear optics by providing evidence of a sum-frequency generation (SFG) process seeded by SHG, which sizably contributes to the overall THG yield. We address this mechanism by unveiling a characteristic fingerprint in the polarization state of the THG emission from gold noncentrosymmetric nanoantennas, which directly reflects the asymmetric distribution of second-harmonic fields within the structure and does not depend on the model one employs to describe photon upconversion. We suggest that such cascaded processes may also appear for structures that exhibit only moderate SHG yields. The presence of this peculiar mechanism in THG from plasmonic nanoantennas at telecommunication wavelengths allows us to gain further insight into the physics of plasmon-enhanced nonlinear optical processes. This could be crucial in the realization of nanoscale elements for photon conversion and manipulation operating at room temperature.

Graphene as an Ideal Buffer Layer for the Growth of High-Quality Ultrathin Cr2O3 Layers on Ni(111).

Metal-oxide nanostructures play a fundamental role in a large number of technological applications, ranging from chemical sensors to data storage devices. As the size of the devices shrinks down to the nanoscale, it is mandatory to obtain sharp and good quality interfaces. Here, it is shown that a two-dimensional material, namely, graphene, can be exploited as an ideal buffer layer to tailor the properties of the interface between a metallic substrate and an ultrathin oxide. This is proven at the interface between an ultrathin film of the magnetoelectric antiferromagnetic oxide Cr2O3 and a Ni(111) single crystal substrate. The chemical composition of the samples has been studied by means of X-ray photoemission spectroscopy, showing that the insertion of graphene, which remains buried at the interface, is able to prevent the oxidation of the substrate. This protective action leads to an ordered and layer-by-layer growth, as revealed by scanning tunneling microscopy data. The structural analysis performed by low-energy electron diffraction indicates that the oxide layer grown on graphene experiences a significant compressive strain, which strongly influences the surface electronic structure observed by scanning tunneling spectroscopy.

Room Temperature Resonant Photocurrent in an Erbium Low-Doped Silicon Transistor at Telecom Wavelength.

An erbium-doped silicon transistor prepared by ion implantation and co-doped with oxygen is investigated by photocurrent generation in the telecommunication range. The photocurrent is explored at room temperature as a function of the wavelength by using a supercontinuum laser source working in the µW range. The 1-µm² transistor is tuned to involve in the transport only those electrons lying in the Er-O states. The spectrally resolved photocurrent is characterized by the typical absorption line of erbium and the linear dependence of the signal over the impinging power demonstrates that the Er-doped transistor is operating far from saturation. The relatively small number of estimated photoexcited atoms (≈ 4 × 10 4 ) makes Er-dpoed silicon potentially suitable for designing resonance-based frequency selective single photon detectors at 1550 nm.