The effects of human height and mass on the calculated induced electric fields at 50 Hz for comparison with the EMF Directive 2013/35/EU.

A worker's height and mass can significantly affect the way in which incident low frequency electric and magnetic fields are absorbed in the body. To investigate this, several anatomically realistic human models were produced for heights between 1.56 and 1.96 m and masses between 33 and 113 kg. The human models were derived from the MAXWEL surface-based phantom, the model previously used in the EMF Directive 2013/35/EU Practical Guide to demonstrate how induced electric fields in the body are calculated. Computer simulations were carried out to calculate the low frequency EMF directive exposure limit value (ELV) quantities, i.e. the induced electric fields, in these human model variations from exposure to external 50 Hz magnetic and electric fields. The computational work showed that simple relationships relating the human model's height/weight with the induced electric fields in tissue types such as bone, fat, muscle, brain, spinal cord and retina could be developed. Calculations of parameters that affected absorption and fields required to produce the EMF Directive ELVs were carried out and compared with the action levels (ALs). It was found that the ALs generally provided a conservative estimate of the ELVs for the various human models and exposure situations studied.

Investigating the Swimming of Microbial Pathogens Using Digital Holography.

To understand much of the behaviour of microbial pathogens, it is necessary to image living cells, their interactions with each other and with host cells. Species such as Escherichia coli are difficult subjects to image: they are typically microscopic, colourless and transparent. Traditional cell visualisation techniques such as fluorescent tagging or phase-contrast microscopy give excellent information on cell behaviour in two dimensions, but no information about cells moving in three dimensions. We review the use of digital holographic microscopy for three-dimensional imaging at high speeds, and demonstrate its use for capturing the shape and swimming behaviour of three important model pathogens: E. coli, Plasmodium spp. and Leishmania spp.

Induced electric fields in the MAXWEL surface-based human model from exposure to external low frequency electric fields.

This work presents calculations of internal induced electric fields in the anatomically realistic surface-based model of the male human body, MAXWEL, from exposure to external low frequency electric fields under grounded and isolated conditions. The maximum 99th percentile induced electric fields calculated in the MAXWEL central nervous system were 3.49 (grounded) and 1.54 (isolated) mV m(-1) per kV m(-1) at 50 Hz. The application of 2, 1 and 0.5 mm resolution voxel models derived from the surface-based version to the calculations of induced electric fields is described. 2 mm and 1 mm resolution maximum 99th percentile induced electric field values calculated in selected tissues of the eye at 50 Hz were within 30 % of those calculated at 0.5 mm resolution. The calculated electric field values in MAXWEL were compared with values from the male model NORMAN and female model NAOMI. The maximum 99th percentile value for NAOMI, calculated by Dimbylow in bone, was 49.4 mV m(-1) per kV m(-1) at 50 Hz under grounded conditions. The corresponding value calculated in MAXWEL was 15.7 mV m(-1) per kV m(-1), considerably lower due to anatomical differences between the male and female models.

An investigation into the effectiveness of ELF protective clothing when exposed to RF fields between 65 MHz and 3 GHz.

Protective garments are worn by electric power workers to shield the body against electromagnetic fields. This paper uses the finite-difference time-domain method to calculate SAR in the heterogeneous human voxel model NORMAN, clad in a protective suit and exposed to radio-frequency (RF) electromagnetic fields between 65 MHz and 3 GHz. The representation of the suit was produced for this work by the modelling and voxelization of a surface-rendered object, based on the dimensions of the male voxel phantom. The calculations showed that the peak-localized SAR in the head was higher than that calculated for a model without a protective suit for a number of exposure situations. These localized SAR values could be up to three times the values of those calculated for a model without a protective suit for a particular frequency. It is thought that the SAR hotspots in the head are caused by resonances in a cavity, which in this case is the conductive hood of the suit. This work shows that the increase in the peak-localized SAR in the head due to wearing the suit meant that, in certain situations, the ICNIRP and IEEE reference levels were no longer conservative. Therefore, it is important that power line workers exposed to RF fields wear the correct high-frequency protective suits with conducting visors.

SAR in a child voxel phantom from exposure to wireless computer networks (Wi-Fi).

Specific energy absorption rate (SAR) values have been calculated in a 10 year old sitting voxel model from exposure to electromagnetic fields at 2.4 and 5 GHz, frequencies commonly used by Wi-Fi devices. Both plane-wave exposure of the model and irradiation from antennas in the near field were investigated for a variety of exposure conditions. In all situations studied, the SAR values calculated were considerably below basic restrictions. For a typical Wi-Fi exposure scenario using an inverted F antenna operating at 100 mW, a duty factor of 0.1 and an antenna-body separation of 34 cm, the maximum peak localized SAR was found to be 3.99 mW kg(-1) in the torso region. At 2.4 GHz, using a power of 100 mW and a duty factor of 1, the highest localized SAR value in the head was calculated as 5.7 mW kg(-1). This represents less than 1% of the SAR previously calculated in the head for a typical mobile phone exposure condition.

FDTD calculations of SAR for child voxel models in different postures between 10 MHz and 3 GHz.

Calculations of specific energy absorption rate (SAR) have been performed on the rescaled NORMAN 7-y-old voxel model and the Electronics and Telecommunications Research Institute (ETRI) child 7-y-old voxel model in the standing arms down, arms up and sitting postures. These calculations were for plane-wave exposure under isolated and grounded conditions between 10 MHz and 3 GHz. It was found that there was little difference at each resonant frequency between the whole-body averaged SAR values calculated for the NORMAN and ETRI 7-y-old models for each of the postures studied. However, when compared with the arms down posture, raising the arms increased the SAR by up to 25%. Electric field values required to produce the International Commission on Non-Ionizing Radiation Protection and Institute of Electrical and Electronic Engineers public basic restriction were calculated, and compared with reference levels for the different child models and postures. These showed that, under certain worst-case exposure conditions, the reference levels may not be conservative.

Spatial averaging of fields from half-wave dipole antennas and corresponding SAR calculations in the NORMAN human voxel model between 65 MHz and 2 GHz.

If an antenna is located close to a person, the electric and magnetic fields produced by the antenna will vary in the region occupied by the human body. To obtain a mean value of the field for comparison with reference levels, the Institute of Electrical and Electronic Engineers (IEEE) and International Commission on Non-Ionizing Radiation Protection (ICNIRP) recommend spatially averaging the squares of the field strength over the height the body. This study attempts to assess the validity and accuracy of spatial averaging when used for half-wave dipoles at frequencies between 65 MHz and 2 GHz and distances of lambda/2, lambda/4 and lambda/8 from the body. The differences between mean electric field values calculated using ten field measurements and that of the true averaged value were approximately 15% in the 600 MHz to 2 GHz range. The results presented suggest that the use of modern survey equipment, which takes hundreds rather than tens of measurements, is advisable to arrive at a sufficiently accurate mean field value. Whole-body averaged and peak localized SAR values, normalized to calculated spatially averaged fields, were calculated for the NORMAN voxel phantom. It was found that the reference levels were conservative for all whole-body SAR values, but not for localized SAR, particularly in the 1-2 GHz region when the dipole was positioned very close to the body. However, if the maximum field is used for normalization of calculated SAR as opposed to the lower spatially averaged value, the reference levels provide a conservative estimate of the localized SAR basic restriction for all frequencies studied.

Calculated SAR distributions in a human voxel phantom due to the reflection of electromagnetic fields from a ground plane between 65 MHz and 2 GHz.

If an electromagnetic field is incident normally onto a perfectly conducting ground plane, the field is reflected back into the domain. This produces a standing wave above the ground plane. If a person is present within the domain, absorption of the field in the body may cause problems regarding compliance with electromagnetic guidelines. To investigate this, the whole-body averaged specific energy absorption rate (SAR), localised SAR and ankle currents in the voxel model NORMAN have been calculated for a variety of these exposures under grounded conditions. The results were normalised to the spatially averaged field, a technique used to determine a mean value for comparison with guidelines when the field varies along the height of the body. Additionally, the external field values required to produce basic restrictions for whole-body averaged SAR have been calculated. It was found that in all configurations studied, the ICNIRP reference levels and IEEE MPEs provided a conservative estimate of these restrictions.

Transport of Escherichia coli bacteria through laboratory columns of glacial-outwash sediments: estimating model parameter values based on sediment characteristics.

Bacterial transport through cores of intact, glacial-outwash aquifer sediment was investigated with the overall goal of better understanding bacterial transport and developing a predictive capability based on the sediment characteristics. Variability was great among the cores. Normalized maximum bacterial-effluent concentrations ranged from 5.4x10(-7) to 0.36 and effluent recovery ranged from 2.9x10(-4) to 59%. Bacterial breakthrough was generally rapid with a sharp peak occurring nearly twice as early as the bromide peak. Bacterial breakthrough exhibited a long tail of relatively constant concentration averaging three orders of magnitude less than the peak concentration for up to 32 pore volumes. The tails were consistent with non-equilibrium detachment, corroborated by the results of flow interruption experiments. Bacterial breakthrough was accurately simulated with a transport model incorporating advection, dispersion and first-order non-equilibrium attachment/detachment. Relationships among bacterial transport and sediment characteristics were explored with multiple regression analyses. These analyses indicated that for these cores and experimental conditions, easily-measurable sediment characteristics--median grain size, degree of sorting, organic-matter content and hydraulic conductivity--accounted for 66%, 61% and 89% of the core-to-core variability in the bacterial effective porosity, dispersivity and attachment-rate coefficient, respectively. In addition, the bacterial effective porosity, median grain size and organic-matter content accounted for 76% of the inter-core variability in the detachment-rate coefficient. The resulting regression equations allow prediction of bacterial transport based on sediment characteristics and are a possible alternative to using colloid-filtration theory. Colloid-filtration theory, used without the benefit of running bacterial transport experiments, did not as accurately replicate the observed variability in the attachment-rate coefficient.

Variations in calculated SAR with distance to the perfectly matched layer boundary for a human voxel model.

The purpose of this work was to investigate the dependence of whole-body averaged specific energy absorption rate (SAR), calculated using the finite-difference time-domain (FDTD) method, on the width of the free space region between a numerical phantom and the perfectly matched layer (pml) absorbing boundary. Results show that an increase in this width from 2 cells to 70 cells caused variations in the calculated whole-body averaged SAR of less than 2% for the FDTD code employing split-field pmls. Similarly, an increase in the width of the pml layer had little effect on the whole-body SAR values.

FDTD calculations of specific energy absorption rate in a seated voxel model of the human body from 10 MHz to 3 GHz.

Finite-difference time-domain (FDTD) calculations have been performed to investigate the frequency dependence of the specific energy absorption rate (SAR) in a seated voxel model of the human body. The seated model was derived from NORMAN (NORmalized MAN), an anatomically realistic voxel phantom in the standing posture with arms to the side. Exposure conditions included both vertically and horizontally polarized plane wave electric fields between 10 MHz and 3 GHz. The resolution of the voxel model was 4 mm for frequencies up to 360 MHz and 2 mm for calculations in the higher frequency range. The reduction in voxel size permitted the calculation of SAR at these higher frequencies using the FDTD method. SAR values have been calculated for the seated adult phantom and scaled versions representing 10-, 5- and 1-year-old children under isolated and grounded conditions. These scaled models do not exactly reproduce the dimensions and anatomy of children, but represent good geometric information for a seated child. Results show that, when the field is vertically polarized, the sitting position causes a second, smaller resonance condition not seen in resonance curves for the phantom in the standing posture. This occurs at approximately 130 MHz for the adult model when grounded. Partial-body SAR calculations indicate that the upper and lower regions of the body have their own resonant frequency at approximately 120 MHz and approximately 160 MHz, respectively, when the grounded adult model is orientated in the sitting position. These combine to produce this second resonance peak in the whole-body averaged SAR values calculated. Two resonance peaks also occur for the sitting posture when the incident electric field is horizontally polarized. For the adult model, the peaks in the whole-body averaged SAR occur at approximately 180 and approximately 600 MHz. These peaks are due to resonance in the arms and feet, respectively. Layer absorption plots and colour images of SAR in individual voxels show the specific regions in which the seated human body absorbs the incident field. External electric field values required to produce the ICNIRP basic restrictions were derived from SAR calculations and compared with ICNIRP reference levels. This comparison shows that the reference levels provide a conservative estimate of the ICNIRP whole-body averaged SAR restriction, with the exception of the region above 1.4 GHz for the scaled 1-year-old model.

Effects of posture on FDTD calculations of specific absorption rate in a voxel model of the human body.

A change in the posture of the human body can significantly affect the way in which it absorbs radiofrequency electromagnetic radiation. To study this, an anatomically realistic model of the body has been modified to develop new voxel models in postures other than the standard standing position with arms to the side. These postures were sitting, arms stretched out horizontally to the side and vertically above the head. Finite-difference time-domain (FDTD) calculations of the whole-body averaged specific energy absorption rate (SAR) have been performed from 10 MHz to 300 MHz at a resolution of 4 mm. Calculations show that the effect of a raised arm above the head posture was to increase the value of the whole-body averaged SAR at resonance by up to 35% when compared to the standard, arms by the side position. SAR values, both whole-body averaged and localized in the ankle, were used to derive the external electric field values required to produce the SAR basic restrictions of the ICNIRP guidelines. It was found that, in certain postures, external electric field reference levels alone would not provide a conservative estimate of localized SAR exposure and it would be necessary to invoke secondary reference levels on limb currents to provide compliance with restrictions.

Lipid analysis of the response of a sedimentary microbial community to polycyclic aromatic hydrocarbons.

Polycyclic aromatic hydrocarbons (PAH) are widespread environmental contaminants that can, under proper conditions, be degraded by microorganisms. The responses of a riverine sedimentary microbial community to PAH contamination were examined using an integrated biochemical assay that yielded data on PAH concentration, total microbial biomass, and microbial community structure and were interpreted using perturbation theory and the subsidy-stress gradient. Microbial mineralization of naphthalene, anthracene, fluorene, and phenanthrene was observed 24 h after their addition to all sediments sampled and ranged from 0.9 to 16.3% in ambient sediments and from 14.8 to 35.8% in contaminated sediments. Total microbial biomass, determined by phospholipid phosphate, increased in response to intermediate PAH concentration and decreased at sites with the highest PAH concentration (p < 0.05) during seven out of nine (78%) seasonal sampling periods. The two sampling periods that were not statistically different followed periods of high water and cold temperatures. Phospholipid fatty acid analysis of microbial community structure analysis indicated that increases in the relative abundance of gram-negative aerobes and heterotrophic eukaryotes were responsible, in part, for these observed increases in total microbial biomass. These findings (increased degradation rates, increased biomass at intermediate PAH concentrations, and altered community structure) indicate that a component of the microbial community responded to PAH as a usable input and are consistent with the predictions of perturbation theory and a subsidy-stress gradient.

Investigation of an outbreak of multi-drug resistant Acinetobacter baumannii in an intensive care burns unit.

Over a three month period there was an outbreak of infection, due to a multi-drug resistant Acinetobacter baumannii in the intensive care burns unit with spread of infection to other patients, both within the unit and elsewhere in the hospital. Microbiological sampling of the environment and of the healthcare workers' (HCWs) hands were carried out. Strain relatedness of the isolates was confirmed by pulsed field gel electrophoresis. Fifteen patients were involved in the outbreak, whose infections were all hospital-acquired. The burns room environment was contaminated with the A. baumannii, as was the door handle of the door leading from the ante-chamber between both rooms. This allowed the hands of HCWs to be contaminated by A. baumannii despite appropriate handwashing procedures prior to leaving the rooms. Two staff members were colonized with A. baumannii. One HCW who was directly involved in patient care was found to be "heavily" colonized, the other, with less patient contact, was only "lightly" colonized. Review of handwashing practices revealed that chlorhexidine/alcohol hand wash solution was not used by the HCW whose hands were heavily colonized.A combination of a review of handwashing practice, education about the spread of bacteria via hands and contaminated environment, and the revision of infection control procedures in the unit contributed to a prompt termination of the outbreak.

Spatial and Seasonal Variation in a Reservoir Sedimentary Microbial Community as Determined by Phospholipid Analysis.

Sediment samples were collected monthly from Acton Lake, a eutrophic reservoir located in an agricultural region of southwestern Ohio, from three stations (River, Middle, and Dam) during the period May 1995 through January 1997. Sedimentary microbial biomass and community structures from these stations were studied using phospholipid analysis. At the River and Middle stations, the water column remained aerobic throughout the year, whereas the water overlying the Dam station sediments became anaerobic during summer stratification. Sedimentary microbial biomass at the River and Middle stations, as measured by the phospholipid phosphate (PLP) method, ranged from 225 to 450 nmol PLP g?1 d.w. (dry weight). Sedimentary microbial biomass at the Dam station was typically greater and ranged from 500 to 1,500 nmol PLP g?1 d.w. Principal component analysis of phospholipid fatty acid (PLFA) profiles indicated that the sedimentary microbial communities at all three stations displayed seasonal patterns of change. Among these patterns of change was a shift from aerobic microorganisms during times of cold water to anaerobic microorganisms during times of warm water. The Dam station differed from the River and Middle stations in that sediments from this station had disproportionately more polyenoic fatty acids, whereas sediments from the River and Middle stations had disproportionately more bacterial fatty acids. These data suggest that the Dam station may be a depositional zone for microeukaryotic phytoplankton produced in the overlying water column. These findings have implications for the understanding of carbon flux in reservoirs and preservation of organic matter in aquatic systems.

Increasing bacterial resistance in pediatric acute conjunctivitis (1997-1998).

We sought to determine the current level of resistance in Haemophilus influenzae and Streptococcus pneumoniae, the primary pathogens of pediatric conjunctivitis. Between January 1997 and March 1998, we prospectively cultured acute conjunctivitis in 250 ambulatory pediatric patients from rural Kentucky whose average age was 24.3 months. In those 250 cases, 106 H. influenzae (42% of the total) and 75 S. pneumoniae (30% of the total) pathogens were isolated, with no growth or no pathogen resulting in 79 cases (32% of the total). Beta-lactamase was detected in 60 (69%) of 87 tested strains of H. influenzae. Among 65 isolates of S. pneumoniae tested for penicillin susceptibility, 44 (68%) were susceptible, 17 (26%) were resistant, and 4 (6%) were intermediate. Conjunctivitis with acute otitis media was observed in 97 patients (39%), and H. influenzae was recovered in 57% of these 97 cases. As for in vitro activity, ciprofloxacin, ofloxacin, and tetracycline were the most active; and gentamicin, tobramycin, polymyxin B-trimethoprim, and polymyxin B-neomycin were intermediately active. Sulfamethoxazole possessed no activity against either pathogen. Beta-lactamase production was detected in 69% of H. influenzae strains, which still remains the primary causative pathogen of both conjunctivitis and conjunctivitis-otitis syndrome. Penicillin-nonsusceptible S. pneumoniae was observed in 32% of 65 patients with S. pneumoniae conjunctivitis, with most strains being penicillin resistant.

Comparison of differential plating media and two chromatography techniques for the detection of histamine production in bacteria.

The bacterial enzyme histidine decarboxylase (Hdc) catalyses the conversion of histidine into histamine. This amine is essential for the biosynthesis of iron chelators (siderophores) and is an important cause of food poisoning after consumption of fish contaminated with histamine-producing bacteria. In this work we compared different methods for detecting histamine secreted by different bacterial strains. The presence of histamine in the culture supernatant of Vibrio anguillarum, which produces Hdc and secretes the histamine-containing siderophore anguibactin, was detected by thin-layer chromatography. Similar results were obtained using the culture supernatant of the Acinetobacter baumannii 19606 prototype strain that secretes the histamine-containing siderophore acinetobactin. Conversely, histamine was not detected in the culture supernatant of an isogenic V. anguillarum Hdc mutant and the A. baumannii 8399 strain that secretes a catechol siderophore different from anguibactin and acinetobactin. These results were confirmed by capillary gas chromatography/mass spectrometry. However, all these strains tested positive for histamine secretion when cultured on differential plating media containing histidine and a pH indicator, which were specifically designed for the detection of histamine-producing bacteria. The pH increase of the medium surrounding the bacterial colonies was however drastically reduced when the histidine-containing medium was supplemented with peptone, beef extract, and glucose. The histidine-containing culture supernatants of the A. baumannii and V. anguillarum strains showed an increase of about two units of pH, turned purple upon the addition of cresol red, and contained high amounts of ammonia. Escherichia coli strains, which are Hdc negative and do not use histidine as a carbon, nitrogen, and energy source, gave negative results with the differential solid medium and produced only moderate amounts of ammonia when cultured in the presence of excess histidine. This study demonstrates that, although more laborious and requiring some expensive equipment, thin-layer and gas chromatography/mass spectrometry are more accurate than differential media for detecting bacterial histamine secretion. The results obtained with these analytical methods are not affected by byproducts such as ammonia, which are generated during the degradation of histidine and produce false positive results with the differential plating media.

A pilot study for monitoring changes in the microbiological component of metalworking fluids as a function of time and use in the system.

This article describes the results of a pilot study to examine changes in the biological component of metalworking fluids (MWF) as a function of use. Fluid samples were taken from two newly charged systems, designated BT-7415 and BT-7707, at 1-week intervals for 8 weeks and characterized with respect to the kinds and numbers of bacteria present and presence of soluble protein in cell-free supernatants. In addition, lipid extracts of pelleted cells from fluids in BT-7415 were examined by gas chromatography/mass spectroscopy for the kinds and relative amounts of phospholipid fatty acids (PLFA) present. A total of 19 different bacterial species was cultured and identified, more than half (12/19) of which were gram-negative. Total colony-forming units (CFU) reached levels of 2.2 x 10(3)/mL in BT-7415 and 2.4 x 10(5)/mL in BT-7707. The most common genus isolated was Pseudomonas. Estimations of cell numbers based on total biomass from PLFA in samples from BT-7415 indicated 1.1 x 10(7)/mL after 8 weeks of use. Both the numbers of PLFA identified and the amounts of each detected in BT-7415 increased as the fluids were used. The chromatograms were dominated by two fatty acids, the amounts of which increased with time. These fatty acids, 18:2 omega 6 and 18:1 omega 9c, are not commonly associated with pseudomonads. This suggests that there is an important component of the biological consortium in MWF is not being detected by currently used culture techniques. There was no soluble protein detected in any of the samples from either system.