Accuracy of artificial intelligence-based segmentation of the mandibular canal in CBCT.

OBJECTIVES: To investigate the accuracy of artificial intelligence (AI)-based segmentation of the mandibular canal, compared to the conventional manual tracing, implementing implant planning software. MATERIALS AND METHODS: Localization of the mandibular canals was performed for 104 randomly selected patients. A localization was performed by three experienced clinicians in order to serve as control. Five tracings were performed: One from a clinician with a moderate experience with a manual tracing (I1), followed by the implementation of an automatic refinement (I2), one manual from a dental student (S1), and one from the experienced clinician, followed by an automatic refinement (E). Subsequently, two fully automatic AI-driven segmentations were performed (A1,A2). The accuracy between each method was measured using root mean square error calculation. RESULTS: The discrepancy among the models of the mandibular canals, between the experienced clinicians and each investigated method ranged from 0.21 to 7.65 mm with a mean of 3.5 mm RMS error. The analysis of each separate mandibular canal's section revealed that mean RMS error was higher in the posterior and anterior loop compared to the middle section. Regarding time efficiency, tracing by experienced users required more time compared to AI-driven segmentation. CONCLUSIONS: The experience of the clinician had a significant influence on the accuracy of mandibular canal's localization. An AI-driven segmentation of the mandibular canal constitutes a time-efficient and reliable procedure for pre-operative implant planning. Nevertheless, AI-based segmentation results should always be verified, as a subsequent manual refinement of the initial segmentation may be required to avoid clinical significant errors.

Accuracy of manual and artificial intelligence-based superimposition of cone-beam computed tomography with digital scan data, utilizing an implant planning software: A randomized clinical study.

OBJECTIVES: To investigate the accuracy of conventional and automatic artificial intelligence (AI)-based registration of cone-beam computed tomography (CBCT) with intraoral scans and to evaluate the impact of user's experience, restoration artifact, number of missing teeth, and free-ended edentulous area. MATERIALS AND METHODS: Three initial registrations were performed for each of the 150 randomly selected patients, in an implant planning software: one from an experienced user, one from an inexperienced operator, and one from a randomly selected post-graduate student of implant dentistry. Six more registrations were performed for each dataset by the experienced clinician: implementing a manual or an automatic refinement, selecting 3 small or 3 large in-diameter surface areas and using multiple small or multiple large in-diameter surface areas. Finally, an automatic AI-driven registration was performed, using the AI tools that were integrated into the utilized implant planning software. The accuracy between each type of registration was measured using linear measurements between anatomical landmarks in metrology software. RESULTS: Fully automatic-based AI registration was not significantly different from the conventional methods tested for patients without restorations. In the presence of multiple restoration artifacts, user's experience was important for an accurate registration. Registrations' accuracy was affected by the number of free-ended edentulous areas, but not by the absolute number of missing teeth (p < .0083). CONCLUSIONS: In the absence of imaging artifacts, automated AI-based registration of CBCT data and model scan data can be as accurate as conventional superimposition methods. The number and size of selected superimposition areas should be individually chosen depending on each clinical situation.

Influence of scanning protocol on the accuracy of complete-arch digital implant scans: An in vitro study.

OBJECTIVE: This in-vitro study assessed the influence of two intraoral scanning (IOS) protocols on the accuracy (trueness and precision) of digital scans performed in edentulous arches. METHODS: Twenty-two abutment-level master casts of edentulous arches with at least four implants were scanned repeatedly five times, each with two different scanning protocols. Protocol A (IOS-A) consisted of scanning the edentulous arch before inserting the implant scan bodies, followed by their insertion and its subsequent digital acquisition. Protocol B (IOS-B) consisted of scanning the edentulous arch with the scan bodies inserted from the outset. A reference scan from each edentulous cast was obtained using a laboratory scanner. Trueness and precision were calculated using the spatial fit analysis, cross-arch distance, and virtual Sheffield test. Statistical analysis was performed using generalized estimating equations (GEEs). Statistical significance was set at α = .05. RESULTS: In the spatial fit test, the precision of average 3D distances was 45 µm (±23 µm) with protocol IOS-A and 25 µm (±10 µm) for IOS-B (p < .001), and the trueness of average 3D distances was 44 µm (±24 µm) with protocol IOS-A and 24 µm (±7 µm) for IOS-B (p < .001). Cross-arch distance precision was 59 µm (±53 µm) for IOS-A and 41 µm (±43 µm) for IOS-B (p = .0035), and trueness was 64 µm (±47 µm) for IOS-A and 50 µm (±40 µm) for IOS-B (p = .0021). Virtual Sheffield precision was 286 µm (±198 µm) for IOS-A and 146 µm (±92 µm) for IOS-B (p < .001), and trueness was 228 µm (±171 µm) for IOS-A and 139 µm (±92 µm) for IOS-B (p < .001). CONCLUSIONS: The IOS-B protocol demonstrated significantly superior accuracy. Placement of scan bodies before scanning the edentulous arch is recommended to improve the accuracy of complete-arch intraoral scanning.

Effect of preoperative chlorhexidine, essential oil, and cetylpyridinium chloride mouthwashes on bacterial contamination during dental implant surgery: A randomized controlled clinical trial.

Background: Although the role of chlorhexidine and other mouthwashes in periodontal therapy has been elucidated, little information is available on their use as routine preoperative mouth rinses before surgery, especially in periodontal procedures such as dental implant surgery. Objective: This study aimed to compare the efficacy of preoperative chlorhexidine, essential oil, and cetylpyridinium chloride mouthwashes in reducing bacterial contamination at the time of implant placement. Materials and Methods: Eligible patients who underwent dental implant surgery were randomly divided into four groups based on the mouthwash used: (1) 0.12 % chlorhexidine, (2) essential oil, (3) cetylpyridinium chloride, and (4) saline (served as the control group). All the patients of each group rinsed preoperatively with 15 mL of the respective mouthwash for 60 s. Saliva samples before (pre) and immediately after rinsing with the mouthwash (post) and after suturing the flap (end) were collected on the day of the implant placement. Real-time quantitative polymerase chain reaction (qPCR) was performed to analyze the samples and quantify the targeted periodontal pathogens using a propidium monoazide (PMA) dye. Results: Forty patients were included in the study. Real-time qPCR demonstrated a significant reduction in the number of pathogens in the saliva samples of the mouthwash groups compared to that of the control group. A statistically significant difference was observed between the groups for the pre-post and pre-end samples (p < 0.001) but not for the post-end samples (p = 0.203). A statistically significant difference was observed between the chlorhexidine, essential oil, and cetylpyridinium chloride mouthwash groups and the saline group (P < 0.001). The bacterial counts significantly differed with and without the use of the PMA dye. Conclusions: Preoperative chlorhexidine, essential oil, and cetylpyridinium chloride mouthwashes can reduce the bacterial load at the time of implant placement, thereby reducing the incidence of implant-related complications.

Depressive symptoms and their correlates among predoctoral dental students in the United States.

OBJECTIVE: To investigate the prevalence of self-reported depressive symptoms among predoctoral dental students in the United States and examine potential correlates. METHODS: A survey was emailed to all 66 dental schools in the United States, inviting them to distribute it to their predoctoral students. Depressive symptoms were assessed using the Patient Health Questionnaire-9. Data collection occurred from February to April 2020. Multivariable ordinal logistic regression was used to assess associations between demographic variables and depressive symptom severity category, adjusting for potential confounding. RESULTS: Of an estimated 25,000 predoctoral dental students at the 66 schools, 631 students from 21 schools completed the survey. A total of 24.1% were categorized as having minimal or no depressive symptoms, 33.6% as having mild depressive symptoms, and 42.3% as having moderate, moderately severe, or severe depressive symptoms. Gender (p = 0.015) and race/ethnicity (p = 0.002) were significant predictors of severity, adjusting for other variables. Students identifying as female had higher odds of self-reporting greater depressive severity symptoms compared with students identifying as male. Students identifying as African American/Black (non-Hispanic) and Asian/Pacific Islander had higher odds of self-reporting greater depressive severity symptoms compared with students identifying as White. CONCLUSION: There is evidence of a high prevalence of depressive symptoms among predoctoral dental students in the United States. Demographic variables may be risk indicators within this population. Approaches to reduce depressive symptoms among US predoctoral dental students are needed.

Attention-deficit hyperactivity disorder and psychostimulant use in patients seeking dental care-Associations with common orofacial pain complaints.

BACKGROUND: Dental medicine should expand its scope to properly assess medical and psychosocial factors that might have an impact on patients' oral health. Based on previous literature and clinical experience, attention-deficit/hyperactivity disorder and psychostimulant medications might represent factors associated with orofacial pain symptoms. OBJECTIVE: The aim of the study was to assess whether common orofacial pain complaints such as jaw pain, jaw clicking, teeth clenching and headaches are more prevalent in dental patients who have an ADHD diagnosis and/or use psychostimulant medications. METHODS: Orofacial pain symptoms prevalence was compared among four groups from a sample of new patients seeking dental care at Tufts University School of Dental Medicine (n = 11 699) based on ADHD diagnosis and psychostimulants intake: G1: no ADHD, no stimulants; G2: yes ADHD, yes stimulants; G3: yes ADHD, no stimulants; G4: no ADHD, yes stimulants. RESULTS: In multivariable logistic regression models adjusting for age, gender, tobacco use, and alcohol consumption, significant differences were found for clenching (p < .0001), jaw pain (p < .0001), and headache (p < .0001). Compared to G1, two groups (G2 and G4) exhibited significantly higher odds of clenching and headaches, whereas only G2 exhibited significantly higher odds of jaw pain. CONCLUSIONS: In comparison with patients without ADHD and not taking psychostimulants medications, dental patients using psychostimulants with and without ADHD diagnosis report headaches and teeth clenching more frequently, while jaw pain is reported more frequently only by those taking psychostimulants with an ADHD diagnosis. Further research is necessary to assess the nature of these associations and their clinical relevance.

Evaluation of marginal and internal adaptation of veneers generated by the guided prosthetic tooth preparation system.

OBJECTIVE: This in vitro study aimed to assess and contrast the marginal and internal adaptation of all-ceramic prefabricated veneers manufactured via the FirstFit guided tooth preparation system against all-ceramic veneers produced using the chairside Computer-Aided Design/Computer Aided Manufacture (CAD/CAM) system following identical guided preparation protocols. MATERIALS AND METHODS: Two main groups were included, with 16 lithium disilicate veneers per group. Four typodonts were used for the test (FirstFit) and control CAD/CAM groups. Intraoral scans created master casts and preparation guides. Guides performed preparations on typodont teeth (two central incisors and two lateral incisors). Prepared teeth were scanned (CEREC Omnicam) to design and mill CAD/CAM veneers. Marginal gap thickness and cement space thickness were measured using light microscopy at four locations: marginal, cervical internal, middle internal, and incisal internal. RESULTS: No significant difference existed between groups for marginal adaptation (p = 0.058) or incisal internal adaptation (p = 0.076). The control group had significantly lower values for middle internal adaptation (p = 0.023) and cervical internal adaptation (p = 0.019). CONCLUSIONS: Guided preparation evaluation showed no significant differences in marginal or incisal internal adaptation. The CAD/CAM group had significantly lower middle and cervical internal adaptation values.

Dental needs and conditions of individuals with Lowe syndrome: An observational study.

INTRODUCTION: Lowe syndrome (LS) is an uncommon condition that affects the brain, kidneys, nervous system, and eyes, predominantly in males. The aim of this study was to examine dental conditions, dental treatments, and access and/or barriers to care for those with LS compared to healthy individuals. METHODS: Surveys assessing dental conditions, dental treatments, and access and/or barriers to care were administered to families in the Lowe Syndrome Association and families with healthy children who had dental appointments at the Tufts University School of Dental Medicine (TUSDM) pediatric dental clinic. One parent or a guardian of pediatric patients with LS or not at TUSDM was asked to complete an online survey. RESULTS: One hundred and eight surveys were obtained (n:58 from the LS group and n:50 from the healthy group). The LS group was significantly more likely (p < .05) to report "crooked/misaligned teeth," "difficult time chewing," "bad breath," and "mouth cysts" and was significantly less likely to report 6-month examination, "cleaning," and "filling." The LS group reported significantly greater difficulty locating a dentist. CONCLUSION: The findings of this study indicate that individuals with LS are more vulnerable to developing severe dental conditions and experiencing difficulties in accessing dental care than healthy individuals. Additionally, those who present with this syndrome may be less likely to receive specific necessary dental treatments. As a result, it is essential to offer appropriate dental care and support to individuals with LS to guarantee they achieve optimal oral health.

Rural Zambian Oral Health Transition: A Long-Term Retrospective Examination of an Outreach Program's Progress and Impact.

Objective: This study aimed to (a) describe an annual prevention-focused, community-based oral health outreach program in rural Zambia, (b) assess its oral health outcomes using demographic and oral health variables, and c) identify milestones resulting from program activities. Methods: A retrospective analysis of demographic and oral health data from a single site between 2007-2014 and 2018-2019 was conducted. Demographic variables included sex and age, while clinical outcomes encompassed pain, untreated caries, and treatment urgency. Bivariate and multivariable analyses were performed, adjusting for sex and age categories. Information on community development was obtained from the Ministry of Health and local community representatives. Results: Data from 5,791 subjects were analyzed. The prevalence of pain, untreated caries, and highest treatment urgency category decreased consistently across year categories. Both bivariate and multivariable analyses showed statistically significant differences in clinical outcomes between year categories (p < 0.001). In addition, the percentage of male participants and younger age categories increased during the study period. Key program milestones included the installation of two boreholes for clean water, the development of a local community oral health volunteer program, the establishment of an educational pipeline by the Dental Training School for residents, and the construction of a maternal/oral health center with district and ministry oversight. Conclusion: The observed decrease in treatment urgency scores, presence of pain, and untreated caries are consistent with the prevention-seeking behavior of program participants. The increasing participation and changing demographic patterns over time suggest a growing demand for oral health services among males and younger individuals. The positive oral health outcomes and development of a maternal child/oral health facility exemplify a program design aligned with community needs and appropriate care delivery.

Attitudes and opinions of telehealth in the dental school environment: A survey study.

PURPOSE: The objective of this study was to assess provider attitudes and opinions regarding telehealth in the dental school environment. METHOD: A survey was developed and validated and was sent to 849 predoctoral students, postdoctoral students (residents), and faculty at a single dental school. It consisted of 13 questions regarding the participants' professional backgrounds, opinions, and attitudes toward telehealth. The survey opened on November 16, 2021, and remained open for 6 weeks. RESULTS: Of 849 survey recipients, 163 (19%) responded. Among 161 usable surveys, 90 (56%) were predoctoral students, 42 (26%) were postdoctoral students, and 29 (18%) were faculty. Fifty-four percent reported having completed at least one telehealth visit. Among this subset, 80% strongly agreed or agreed that telehealth is a good adjunct in providing care; 74% strongly agreed or agreed that telehealth has improved communication with patients. CONCLUSION: Most dental providers reported positive opinions and attitudes regarding telehealth's ability to improve communication and serve as an adjunct to providing care. PRACTICAL IMPLICATIONS: In the right circumstances, telehealth offers an alternative to traditional oral healthcare delivery methods. Based on the perceptions of dental providers, the use of telehealth may also be beneficial in combination with traditional approaches in the dental school environment.

Assessment of implementation of the caries management by risk assessment philosophy in a dental school.

OBJECTIVE: This cross-sectional study assessed the implementation of documenting a baseline caries risk assessment (CRA) of patients seen by predoctoral dental students and its association with the presence of caries risk management (CRM) treatment. METHODS: A convenience sample of 10,000 electronic axiUm patient records at Tufts University School of Dental Medicine was retrospectively assessed for the presence or absence of a completed CRA and CRM after IRB approval following predetermined inclusion and exclusion criteria. The CRM variables (nutrition counseling, sealant, fluoride) were identified by procedure codes that were completed by the student. Associations were assessed via the chi-square test, Kruskal-Wallis test (with Dunn's test and the Bonferroni correction used in post-hoc tests) and Mann-Whitney U test. RESULTS: Most patients (70.5%) had a CRA completed. However, only 24.9% (out of the 7045 patients with a completed CRA) received CRM, while 22.9% of the 2,955 patients without a CRA received CRM. The difference between the groups with and without a completed CRA in terms of the percentage receiving CRM was not clinically significant. Significant associations were found between a completed CRA and in-house fluoride treatment (p = .034) and between a completed CRA and sealant treatment (p = .001). Patients with higher baseline CRA levels (i.e., greater risk) were more likely to have CRM (16.9% of the 785 patients at low risk, 21.1% of the 1282 patients at moderate risk, 26.3% of the 4347 patients at high risk, and 32.6% of the 631 patients at extreme risk). The association between these two variables was significant (p < .001). CONCLUSION: There is evidence that students were mostly compliant with completing a CRA for most patients; however, there is a deficiency in implementation of CRM approach to help support dental caries management, and there is still much room for improvement.

The relationship between sleep and salivary and serum inflammatory biomarkers in adolescents.

Objectives: Poor sleep behavior can trigger an inflammatory response and contribute to the development of inflammatory diseases. Cytokines can act as indicators of inflammation and may precede the onset of inflammatory diseases. This study aimed to determine the association between sleep timing parameters (bedtime, sleep duration, sleep debt, and social jetlag) and the levels of nine serum and salivary inflammatory and metabolic biomarkers. Methods: Data were collected from 352 adolescents aged 16-19 years enrolled in Kuwait's public high schools. The levels of C-reactive protein (CRP), interleukin-6 (IL-6), interleukin-8 (IL-8), interleukin-10 (IL-10), vascular endothelial growth factor (VEGF), monocyte chemoattractant protein-1 (MCP-1), adiponectin, leptin, and insulin were measured from saliva and serum samples. We conducted mixed-effect multiple linear regression modeling to account for the school variable as a random effect to assess the relationship between the sleep variables and salivary and serum biomarkers. Mediation analysis was conducted to check if BMI was a mediator between bedtime and the biomarkers. Results: There was a statistically significant elevation in serum IL-6 level associated with later bedtime (0.05 pg./mL, p = 0.01). Adolescents with severe sleep debt of ≥2 h had an increase in salivary IL-6 biomarker levels (0.38 pg./mL, p = 0.01) compared to those who had sleep debt of <1 h. Adolescents with sleep debt of ≥2 h had significantly higher levels of serum CRP (0.61 µg/mL, p = 0.02) than those without sleep debt. Additionally, we found that the inflammatory biomarkers (CRP, IL-6, IL-8, IL-10, VEGF, and MCP-1) and metabolic biomarkers (adiponectin, leptin, and insulin) had more statistically significant associations with the bedtime variables than with sleep duration variables. CRP, IL-6, and IL-8 were associated with sleep debt, and IL-6, VEGF, adiponectin, and leptin levels were associated with social jetlag. BMIz was a full mediator in the relationship between late bedtime and increased serum levels of CRP, IL-6, and insulin. Conclusion: Adolescents who go to bed at or later than midnight had dysregulated levels of salivary and serum inflammatory biomarkers, suggesting that disrupted circadian rhythm can trigger higher levels of systemic inflammation and potentially exacerbate chronic inflammation and the risk of metabolic diseases.

Evaluating a dental sleep apnea mini-residency program using the Kirkpatrick model.

OBJECTIVE: The aim of this retrospective study was to evaluate a Dental Sleep Medicine Mini-Residency (DSMMR) continuing education (CE) program using the Kirkpatrick model. METHODS: After receiving ethical approval, data from participants in the 2019-2020 DSMMR CE course were included for the Kirkpatrick evaluation. The analysis was stratified and all the Kirkpatrick levels were integrated: level 1 (satisfaction) was assessed via Likert scale and open-ended questions; level 2 (learning) was evaluated using pretest and posttest knowledge data following Module 1 (M1) and an assessment of multiple-choice questions (MCQs) developed by participants; level 3 (behavior) was evaluated using Likert scale questions; and level 4 (results) was assessed via the percentage of participants who passed the American Board of Dental Sleep Medicine (ABDSM) examination on their first attempt. RESULTS: A total of 90 participants were included in the study. At least 83.1% of participants agreed/strongly agreed with positively worded statements about satisfaction. Knowledge scores significantly increased from pre-M1 to post-M1 (p < 0.001); however, only 15.2% of MCQs were evaluated as well-formulated. At least 88.6% of participants agreed/strongly agreed with positively worded statements about transfer of knowledge/skills to their practice. 91.1% passed the ABDSM examination on their first attempt. CONCLUSION: The evaluation of the 2019-2020 DSMMR using the Kirkpatrick model suggests its overall positive impact as a training program. The Kirkpatrick model provided information that can be used to improve the quality of a program. Future studies should assess other dental CE programs using the Kirkpatrick model or another evaluation model.

Retention of Zirconia Crowns Compared to Stainless Steel Crowns: An Ex-Vivo Study.

PURPOSE: The purpose of this study was to compare the retention of 3M stainless steel crowns™ (SSCs), Kinder Krowns® zirconia crowns (ZCs), and EZCrowns ZCs on extracted primary mandibular second molars ex-vivo. METHODS: A total of 45 extracted primary mandibular second molars were allocated randomly to either of the three groups. All teeth were mounted in Dentsply acrylic molds and then prepared for crown cementation. Crowns were cemented with glass ionomer cement (GIC). Retention testing was performed using Instron 5566A. Differences in retention between the groups were tested via Welch's analysis of variance (ANOVA), and post hoc comparisons were performed with the Games-Howell test. RESULTS: Welch's ANOVA resulted in statistically significant differences between the three groups (P<0.001). The mean±SD force in Newtons (N) for the SSC group, Kinder Krowns® group, and EZCrowns group were 337.0±137.1 N, 89.4±53.6 N, and 106.5±77.7 N, respectively. Post hoc comparisons with the Games-Howell test presented that the SSC group had significantly higher retention than both the ZC groups (P<0.001). There was no significant difference between the ZC groups (P=0.76). CONCLUSIONS: Within the limitations of this ex-vivo study results, due to their statistically significant higher retention, stainless steel crowns should be selected over zirconia crowns when in need of a full coverage restoration. But if esthetics are a concern, dentists can choose freely between either of the ZCs tested in this study.

Accuracy of static computer-aided implant surgery (S-CAIS) using CAD-CAM surgical templates fabricated from different additive manufacturing technologies.

STATEMENT OF PROBLEM: Different 3D printers are available for guided implant surgery, but studies that evaluate their source of errors and their cost-effectiveness are lacking. PURPOSE: The purpose of this in vitro study was to compare the accuracy of different 3-dimensional (3D) printed surgical templates made using different additive manufacturing technologies and to evaluate the effect of implant location on the accuracy of fully guided implant placement. MATERIAL AND METHODS: Fifty partially edentulous maxillary typodonts with edentulous sites in the right second premolar (SP), right lateral incisor (LI), left central incisor (CI), and left first molar (FM) locations were scanned and printed from the standard tessellation language (STL) datasets. The study compared 5 groups for the fabrication of implant surgical templates: Varseo S-Bego (Bego), Polyjet-Stratasys (Poly), Low Force Stereolithography-FormLabs (LFS), P30+-Straumann (P30), and M2-Carbon (M2). After fully guided implant placement, the typodont was scanned, and the 3D implant positions were compared with the master model by superimposing the STL files. Descriptive statistics were calculated for groups and subgroups, and comparisons among the groups and subgroups were conducted via 2-way mixed analysis of variance, Tukey honest significant difference, and post hoc Bonferroni tests (α=.05). RESULTS: The results were site specific and not consistent within each group. For angle deviation, the within-group analysis for P30 demonstrated significantly lower values for implants positioned at site SP (1.4 ±0.8 degrees) than for sites LI (2.3 ±0.7 degrees; P=.001) and CI (2.3 ±0.8 degrees; P=.007). For 3D offset at base for implant CI, LFS was significantly higher than Bego (P=.002), Poly (P=.035), or M2 (P=.001); P30 was also significantly higher than Bego (P=.014) and M2 (P=.006). LFS had a significantly higher 3D offset at the tip than Bego (P=.001) and M2 (P=.022) for implant CI. CONCLUSIONS: The choice of 3D printer seemed to influence fully guided implant surgery in terms of the final implant position compared with initial implant planning. However, although statistically significant differences were present across groups, all additive manufacturing technologies were within clinically acceptable values.

Correlates of burnout in predoctoral dental students in the United States.

OBJECTIVE: The purpose of this research was to investigate correlates of burnout among predoctoral dental students in the United States. METHODS: All 66 dental schools in the US were invited to distribute a survey on topics such as demographics, year of dental school, and burnout to their predoctoral students. Burnout was assessed via the Maslach Burnout Inventory-Human Services Survey, which has three subscales: emotional exhaustion (EE), depersonalization (DP), and personal accomplishment (PA). Multivariable modeling was conducted via generalized linear models using the lognormal distribution to adjust for confounding. RESULTS: The survey was completed by 631 students from 21 dental schools. When adjusting for confounding, students identifying as African American/Black (Non-Hispanic) (regression coefficient [95% CI]: -0.13 (-0.23, -0.02]) or Asian/Pacific Islander (-0.08 [-0.13, -0.02]) reported feeling significantly lower PA than students identifying as white. Students identifying as female reported feeling significantly greater EE (0.18 [0.10, 0.26]), but significantly less DP (-0.26 [-0.44, -0.09]), than students identifying as male. Third- (0.28 [0.07, 0.50]) and fourth-year (0.40 [0.17, 0.63]) students reported significantly higher EE than first-year students, while second- (0.40 [0.18, 0.62]), third- (1.06 [0.59, 1.53]), and fourth-year (1.31 [0.82, 1.81]) students reported significantly higher DP than first-year students. CONCLUSIONS: Risk indicators for burnout among US predoctoral dental students may depend on the dimension of burnout. Identifying those at higher risk of burnout can facilitate the implementation of counseling and other effective intervention strategies. Such identification can also provide insight into how the dental school environment might be contributing to the marginalization of those at higher risk.

Effect of supramucosal height of a scan body and implant angulation on the accuracy of intraoral scanning: An in vitro study.

STATEMENT OF PROBLEM: Intraoral scanners (IOSs) provide a digital alternative to conventional implant impression techniques. However, the effect of the supramucosal height of the scan body and implant angulation on the accuracy of IOSs remains unclear. PURPOSE: The purpose of this in vitro study was to measure the impact of the supramucosal height of the scan body and implant angulation on the accuracy (trueness and precision) of intraoral digital implant scans in partially edentulous models. MATERIAL AND METHODS: Two maxillary partially edentulous casts with 4 implant analogs were fabricated, 1 with 4 parallel implants (P-groups) and 1 with 2 implants distally inclined 18 degrees (A-groups). An implant scan body was positioned on each implant analog (CARES RC Mono Scanbody). For each cast, 3 subgroups were determined based on the soft tissue moulage fabricated for each reference cast exposing 3 mm (P-3 and A-3 subgroups), 5 mm (P-5 and A-5 subgroups), and 7 mm (P-7 and A-7 subgroups) of the implant scan bodies. The 2 reference casts were registered by using a coordinate measurement machine and desktop scanner (7 Series Dental Wings) and then scanned using an IOS (TRIOS 4) (n=15). Linear and angular discrepancy values and root mean square (RMS) error values between the implant scan bodies measured on the reference and experimental scans were computed with an inspection software program (Geomagic). Mann-Whitney U tests with Bonferroni correction were applied for planned comparisons (α=.05/9 ≈ .006). RESULTS: For linear discrepancies, statistically significant differences were found between groups P-3 and A-3 (P=.004) and between P-7 and A-7 (P=.005). For angular discrepancies, statistically significant differences were found between groups A-3 and A-5 (P=.002) and between P-7 and A-7 (P=.003). The RMS error analysis found no statistically significant differences among the groups. CONCLUSIONS: Implant angulation of 18 degrees did not significantly affect the accuracy of the intraoral scans in terms of 6 of the 9 planned comparisons, although the angled groups had lower mean values. Also, the supramucosal height of the scan body did not significantly affect the accuracy of the intraoral scans in terms of 17 of the 18 planned comparisons. Results may vary with different implant scan body designs.

Incidental Findings in Small Field of View Cone-beam Computed Tomography Scans, Part 2: Interpretation with Aid of a Checklist.

INTRODUCTION: Cone-beam computed tomography (CBCT) scans are routinely used by endodontic residents and faculty at Tufts University School of Dental Medicine for diagnostic purposes but are not routinely read for pathologic findings by a radiologist. In a 2017 study by Oser et al (part 1), endodontic residents and a radiologist interpreted CBCT scans taken for endodontic diagnostic purposes, and their findings were compared. The results demonstrated that a radiologist is significantly more likely to report incidental findings in small field of view (FOV) scans. A limitation of this study was that the radiologist used a checklist of common findings to review the scans. The purpose of this study was to examine whether the use of a checklist would improve the sensitivity of the endodontic residents' reporting of incidental findings in small FOV CBCT scans. METHODS: The 203 small FOV CBCT scans used in part 1 were obtained and reviewed by endodontic residents in a systematic fashion. Radiographic findings were reported using a blank checklist. The results were compared with those previously reported. RESULTS: The radiologist reported abnormalities in 176 of the 203 subjects (87%), and the residents reported abnormalities in 184 of the 203 subjects (91%). There was an increase in false positive findings when the residents were using a checklist. CONCLUSIONS: The use of a checklist improved the sensitivity but decreased the specificity of the reporting of incidental findings in small FOV CBCT scans by endodontic residents.

Digital vs Conventional Full-Arch Implant Impressions: A Retrospective Analysis of 36 Edentulous Jaws.

PURPOSE: There is a paucity of comparative clinical studies assessing the accuracy of full-arch digital scans versus conventional implant impressions. The aim of this retrospective study was to compare the three-dimensional (3D) deviations between full-arch digital scans and conventional implant impressions for edentulous maxillae and mandibles. MATERIALS AND METHODS: Twenty-seven patients (36 edentulous jaws) were treated with one-piece, screw-retained implant-supported fixed complete dental prostheses (IFCDPs). Twenty-one jaws were maxillary, and 15 were mandibular. Full-arch conventional impressions and intraoral digital scans with scan bodies and an intraoral scanner had been taken during the impression phase. Following verification of the conventional stone casts, the casts were digitized. The generated standard tessellation language (STL) files from both impression techniques were merged and analyzed with reverse engineering software. The primary aim was to evaluate the accuracy between conventional and digital full-arch scans, while the effect of the edentulous jaw in 3D accuracy was the secondary aim. RESULTS: The cumulative 3D (mean ± SD) deviations between virtual casts from intraoral full-arch digital scans and digitized stone casts generated from conventional implant impressions were found to be 88 ±24 µm. In the maxillary group, the mean ± SD 3D deviation was 85 ±25 µm, compared to 92 ±23 µm for the mandibular group (p = 0.444). CONCLUSION: The 3D implant deviations found between the full-arch digital and conventional impressions lie within the clinically acceptable threshold. No statistically significant difference was identified between maxillary and mandibular jaws in terms of 3D deviations.