Discovery of substituted benzamides as follicle stimulating hormone receptor allosteric modulators.

Follicle-stimulating hormone (FSH), acting on its receptor (FSHR), plays a pivotal role in the stimulation of follicular development and maturation. Multiple injections of protein formulations are used during clinical protocols for ovulation induction and for in vitro fertilization that are followed by a selection of assisted reproductive technologies. In order to increase patient convenience and compliance several research groups have searched for orally bioavailable FSH mimetics for innovative fertility medicines. We report here the discovery of a series of substituted benzamides as positive allosteric modulators (PAM) targeting FSHR. Optimization of this series has led to enhanced activity in primary rat granulosa cells, as well as remarkable selectivity against the closely related luteinizing hormone receptor (LHR) and thyroid stimulating hormone receptor (TSHR). Two modulators, 9j and 9k, showed promising in vitro and pharmacokinetic profiles.

Amperometric detection in microchip electrophoresis devices: effect of electrode material and alignment on analytical performance.

The fabrication and evaluation of different electrode materials and electrode alignments for microchip electrophoresis with electrochemical detection is described. The influences of electrode material, both metal and carbon-based, on sensitivity and LOD were examined. In addition, the effects of working electrode alignment on analytical performance (in terms of peak shape, resolution, sensitivity, and LOD) were directly compared. Using dopamine (DA), norepinephrine, and catechol (CAT) as test analytes, it was found that pyrolyzed photoresist electrodes with end-channel alignment yielded the lowest LOD (35 nM for DA). In addition to being easier to implement, end-channel alignment also offered better analytical performance than off-channel alignment for the detection of all three analytes. In-channel electrode alignment resulted in a 3.6-fold reduction in peak skew and reduced peak tailing by a factor of 2.1 for CAT in comparison to end-channel alignment.

Biological properties of a novel follicle-stimulating hormone/human chorionic gonadotropin chimeric gonadotropin.

A chimeric recombinant human gonadotropin, termed C3, demonstrates both follitropic and lutropic bioactivities. The alpha-subunit construct for C3 is comprised of the recombinant wild-type human glycoprotein hormone alpha-subunit. The beta-subunit DNA construct for C3 encodes residues 1-145 from human chorionic gonadotropin (hCG)-beta with the exceptions that FSH beta amino acid 88 (D) is substituted for hCG beta amino acid 94 (R) and FSH beta amino acids 95-108 (TVRGLGPSYCSFGE) are substituted for hCG beta amino acids 101-114 (GGPKDHPLTCDDPR). C3 is a potent FSH and LH agonist able to bind and to signal through FSH and LH receptors in vitro. In in vivo bioassays optimized to quantify each type of activity, C3 was found to have lutropin and follitropin potencies at levels similar to those of recombinant human LH and recombinant human FSH, respectively. In immature rats, C3 was sufficient to support the maturation of normal ovarian follicles. Moreover, a significant portion of follicles matured by C3 ruptured in response to an ovulatory hCG stimulus and gave rise to morphologically normal oocytes. Furthermore, a low dose of C3 promoted weight gain in the rodent uterus, suggesting it also supported preparation for implantation without histological evidence of excessive luteinization of the ovary. In summary, the biological properties of C3 indicate that its chimeric nature has resulted in a fully functional, dual-acting human gonadotropin.

Recent developments in electrochemical detection for microchip capillary electrophoresis.

Significant progress in the development of miniaturized microfluidic systems has occurred since their inception over a decade ago. This is primarily due to the numerous advantages of microchip analysis, including the ability to analyze minute samples, speed of analysis, reduced cost and waste, and portability. This review focuses on recent developments in integrating electrochemical (EC) detection with microchip capillary electrophoresis (CE). These detection modes include amperometry, conductimetry, and potentiometry. EC detection is ideal for use with microchip CE systems because it can be easily miniaturized with no diminution in analytical performance. Advances in microchip format, electrode material and design, decoupling of the detector from the separation field, and integration of sample preparation, separation, and detection on-chip are discussed. Microchip CEEC applications for enzyme/immunoassays, clinical and environmental assays, as well as the detection of neurotransmitters are also described.

Deformation-induced release of ATP from erythrocytes in a poly(dimethylsiloxane)-based microchip with channels that mimic resistance vessels.

The ability of nitric oxide to relax smooth muscle cells surrounding resistance vessels in vivo is well documented. Here, we describe a series of studies designed to quantify amounts of adenosine triphosphate (ATP), a known stimulus of NO production in endothelial cells, released from erythrocytes that are mechanically deformed as these cells traverse microbore channels in lithographically patterned microchips. Results indicate that micromolar amounts of ATP are released from erythrocytes flowing through channels having cross sectional dimensions of 60 x 38 micron (2.22 +/- 0.50 microM ATP). Microscopic images indicate that erythrocytes, when being pumped through the microchip channels, migrate toward the center of the channels, leaving a cell-free or skimming layer at the walls of the channel, a profile known to exist in circulatory vessels in vivo. A comparison of the amounts of ATP released from RBCs mechanically deformed in microbore tubing (2.54 +/- 0.15 microM) vs a microchip (2.59 +/- 0.32 microM) suggests that channels in microchips may serve as functional biomimics of the microvasculature. Control studies involving diamide, a membrane-stiffening agent, suggest that the RBC-derived ATP is not due to cell lysis but rather physical deformation.

Determination of erythrocyte deformability and its correlation to cellular ATP release using microbore tubing with diameters that approximate resistance vessels in vivo.

A novel method is described for measuring the deformability of red blood cells (RBCs) in tubing whose diameters approximate forces encountered in vivo. Here, RBCs from rabbits are loaded into a 50 cm section of 75 microm id microbore tubing and connected to a syringe pump. This section of tubing is then connected to a 15 cm section of 25 microm id tubing. As buffer is pumped through the flow system, the RBCs are evacuated from both sections of tubing. However, the inability of the RBCs to move freely through the 25 mirom id section of tubing results in a buildup of cells at the inlet of this portion of tubing. The continued force output by the syringe pump results in a deformation of the RBCs until all of the cells are eventually evacuated from the flow system. It was found that a measurement of the time required to reach half of the maximum pressure (1/2 P(max)) may be used as an indicator of the RBC deformability. For a given sample, a simple buffer results in less time to reach 1/2 P(max) (6.9 +/- 0.2 s) than deformable RBCs (21.6 +/- 0.8 s). To verify that the increased amount of time to reach 1/2 P(max) is indeed due to the RBCs, various hematocrits of an RBC sample were investigated and, as expected, it was found that a 12% RBC hematocrit had a higher 1/2 P(max) value (26.0 s +/- 2.2 s) when compared to a 7% hematocrit (19.1 +/- 0.3 s). In addition, RBCs chemically stiffened with glutaraldehyde were shown to be 25% less deformable than normal RBCs. Finally, a study was performed to examine the relationship between RBC deformability and ATP release and it was found that ATP release increased as a function of RBC deformability. This method greatly simplifies deformability measurements, employing only a syringe pump and microbore tubing, and may lead to a more complete understanding of the physiological significance of erythrocyte deformability.

Molecular basis for lysophosphatidic acid receptor antagonist selectivity.

Recent characterization of lysophosphatidic acid (LPA) receptors has made possible studies elucidating the structure-activity relationships (SAR) for agonist activity at individual receptors. Additionally, the availability of these receptors has allowed the identification of antagonists of LPA-induced effects. Two receptor-subtype selective LPA receptor antagonists, one selective for the LPA1/EDG2 receptor (a benzyl-4-oxybenzyl N-acyl ethanolamide phosphate, NAEPA, derivative) and the other selective for the LPA3/EDG7 receptor (diacylglycerol pyrophosphate, DGPP, 8:0), have recently been reported. The receptor SAR for both agonists and antagonists are reviewed, and the molecular basis for the difference between agonism and antagonism as well as for receptor-subtype antagonist selectivity identified by molecular modeling is described. The implications of the newly available receptor-subtype selective antagonists are also discussed.