High-performance p-type V2O3 films by spray pyrolysis for transparent conducting oxide applications.

High-quality epitaxial p-type V2O3 thin films have been synthesized by spray pyrolysis. The films exhibited excellent electrical performance, with measurable mobility and high carrier concentration. The conductivity of the films varied between 115 and 1079 Scm-1 while the optical transparency of the films ranged from 32 to 65% in the visible region. The observed limitations in thinner films' mobility were attributed to the nanosized granular structure and the presence of two preferred growth orientations. The 60 nm thick V2O3 film demonstrated a highly competitive transparency-conductivity figure of merit compared to the state-of-the-art.

An In Situ Study of Precursor Decomposition via Refractive Index Sensing in p-Type Transparent Copper Chromium Oxide.

Oxide semiconductors are penetrating into a wide range of energy, environmental, and electronic applications, possessing a potential to outrun currently employed semiconductors. However, an insufficient development of p-type oxides is a major obstacle against complete oxide electronics. Quite often oxide deposition is performed by the spray pyrolysis method, inexpensive to implement and therefore accessible to a large number of laboratories. Although, the complex growth chemistry and a lack of in situ monitoring during the synthesis process can complicate the growth optimization of multicomponent oxides. Here we present a concept of plasmonic, optical sensing that has been applied to spray pyrolysis oxide film growth monitoring for the first time. The proposed method utilizes a polarization based refractive index sensing platform using Au nanodimers as transducing elements. As a proof of concept, the changes in the refractive index of the grown film were extracted from individual Cu(acac)2 and Cr(acac)3 precursors in real time to reveal their thermal decomposition processes. Obtained activation energies give insight into the physical origin of the narrow temperature window for the synthesis of high performing p-type transparent conducting copper chromium oxide Cu x CrO2. The versatility of the proposed method makes it effective in the growth rate monitoring of various oxides, exploring new candidate materials and optimizing the synthesis conditions for acquisition of high performing oxides synthesized by a high throughput cost-effective method.

Surface Modification and Subsequent Fermi Density Enhancement of Bi(111).

Defects introduced to the surface of Bi(111) break the translational symmetry and modify the surface states locally. We present a theoretical and experimental study of the 2D defects on the surface of Bi(111) and the states that they induce. Bi crystals cleaved in ultrahigh vacuum (UHV) at low temperature (110 K) and the resulting ion-etched surface are investigated by low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy (UPS), and scanning tunneling microscopy (STM) as well as spectroscopy (STS) techniques in combination with density functional theory (DFT) calculations. STS measurements of cleaved Bi(111) reveal that a commonly observed bilayer step edge has a lower density of states (DOS) around the Fermi level as compared to the atomic-flat terrace. Following ion bombardment, the Bi(111) surface reveals anomalous behavior at both 110 and 300 K: Surface periodicity is observed by LEED, and a significant increase in the number of bilayer step edges and energetically unfavorable monolayer steps is observed by STM. It is suggested that the newly exposed monolayer steps and the type A bilayer step edges result in an increase to the surface Fermi density as evidenced by UPS measurements and the Kohn-Sham DOS. These states appear to be thermodynamically stable under UHV conditions.

Low-Cost, High-Performance Spray Pyrolysis-Grown Amorphous Zinc Tin Oxide: The Challenge of a Complex Growth Process.

Transparent conductive oxides (TCOs) are important materials for a wide range of optoelectronic devices. Amorphous zinc tin oxide (a-ZTO) is a TCO and one of the best nontoxic, low-cost replacements for more expensive amorphous indium-gallium-zinc oxide. Here, we employ spray pyrolysis (SP), an inexpensive and versatile chemical vapor deposition-based technique, to synthesize a-ZTO with an as-deposited conductivity of ≈300 S/cm-the highest value hitherto among the reported solution-processed films. Compositional analysis via X-ray photoelectron spectroscopy reveals a nonstoichiometric transfer of Zn and Sn from the dissolved precursors into the film, with the best electrical properties achieved at a film composition of xfilm = 0.38 ± 0.04 ((ZnO)x(SnO2)1-x (0 < x < 1)). The morphology of these films is compared to films synthesized by physical vapor deposition (PVD), and a strong correlation between morphology and electrical properties is revealed. The granular nature of the SP-grown films, which seems like a drawback at first glance, brings about the prospect of using a-ZTO in ink-jet-printed films from a nanoparticle suspension for the room-temperature deposition. Brief post-anneal cycles in N2 gas improve the conductivity of the films by means of grain boundary (GB) passivation.

Oxidation of Nb(110): atomic structure of the NbO layer and its influence on further oxidation.

NbO terminated Nb(110) and its oxidation are examined by scanning tunneling microscopy and spectroscopy (STS). The oxide structures are strongly influenced by the structural and electronic properties of the underlying NbO substrate. The NbO is terminated by one-dimensional few-nanometer nanocrystals, which form an ordered pattern. High-resolution STS measurements reveal that the nanocrystals and the regions between the nanocrystals exhibit different electronic characters. Low-dosage oxidation, sufficient for sub-monolayer coverage of the NbO, with subsequent UHV annealing results in the formation of resolved sub-nanometer clusters, positioned in-between the nanocrystals. Higher dosage oxidation results in the formation of a closed Nb2O5-y layer, which is confirmed by X-ray photoelectron spectroscopy measurements. The pentoxide is amorphous at the atomic-scale. However, large scale (tens of nanometers) structures are observed with their symmetry matching that of the underlying nanocrystals.

Crystallographic Characterisation of Ultra-Thin, or Amorphous Transparent Conducting Oxides-The Case for Raman Spectroscopy.

The electronic and optical properties of transparent conducting oxides (TCOs) are closely linked to their crystallographic structure on a macroscopic (grain sizes) and microscopic (bond structure) level. With the increasing drive towards using reduced film thicknesses in devices and growing interest in amorphous TCOs such as n-type InGaZnO 4 (IGZO), ZnSnO 3 (ZTO), p-type Cu x CrO 2 , or ZnRh 2 O 4 , the task of gaining in-depth knowledge on their crystal structure by conventional X-ray diffraction-based measurements are becoming increasingly difficult. We demonstrate the use of a focal shift based background subtraction technique for Raman spectroscopy specifically developed for the case of transparent thin films on amorphous substrates. Using this technique we demonstrate, for a variety of TCOs CuO, a-ZTO, ZnO:Al), how changes in local vibrational modes reflect changes in the composition of the TCO and consequently their electronic properties.

Importance of Local Bond Order to Conduction in Amorphous, Transparent, Conducting Oxides: The Case of Amorphous ZnSnOy.

In this report, reactive and nonreactive sputtering of amorphous ZnSnOy (a-ZnSnOy) was investigated, and extensive composition maps have been measured by X-ray photoelectron spectroscopy. The comprehensive analysis of the ((ZnO)x(SnO2)1-x) composition reveals that the best Zn/Sn ratio for high conductivity of the material can vary depending on the deposition technique utilized. Best conductivities of 225 S/cm were found to occur at x = 0.32 for reactive sputtering of a Sn target and x = 0.27 for nonreactive sputtering of a SnO2 target. These values correspond to unstable polymorphs of a-ZnSnOy, ZnSn2O5, and ZnSn3O7. Distinct local bonding arrangements have been confirmed by Raman spectroscopy.

PEDOT:PSS interfaces stabilised using a PEGylated crosslinker yield improved conductivity and biocompatibility.

The rapidly expanding fields of bioelectronics, and biological interfaces with electronic sensors and stimulators, are placing an increasing demand on candidate materials to serve as robust surfaces that are both biocompatible, stable and electroconductive. Amongst conductive polymers, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is a promising material in biomedical research due to its appropriate stability and high conductivity, however its intrinsic solubility requires a crosslinking process that can limit its conductivity and biocompatibility. Poly(ethylene glycol) is known to be a suitably anti-immunogenic moiety and its derivatives have been widely used for biomedical applications. In this study we investigate the application of poly(ethylene glycol)diglycidyl ether (PEGDE) as an effective crosslinker and conductive filler for PEDOT:PSS. From our interpretation of XPS analysis we hypothesise that the crosslinking reaction is occurring via the epoxy ring of PEGDE interacting with the sulfonic groups of excel PSS chains, which reaches a saturation at 3 w/v% PEGDE concentration. PEGDE crosslinked films did not disperse in aqueous environments, had enhanced electrical conductivity and imparted a significant degree of hydrophilicity to PEDOT:PSS films. This hydrophilicity and the presence of biocompatible PEGDE led to good cell viability and a significantly increased degree of cell spreading on PEDOT:PSS films. In comparison to widely reported chemical crosslinking via glycidoxy propyltrimethoxysilane (GOPS), this original crosslinking yields a highly hydrophilic 2D film substrate with increased electroconductive and biocompatibility properties, resulting in a next-generation formulation for bioengineering applications.

Untangling Cooperative Effects of Pyridinic and Graphitic Nitrogen Sites at Metal-Free N-Doped Carbon Electrocatalysts for the Oxygen Reduction Reaction.

Metal-free carbon electrodes with well-defined composition and smooth topography are prepared via sputter deposition followed by thermal treatment with inert and reactive gases. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy show that three carbons of similar N/C content that differ in N-site composition are thus prepared: an electrode consisting of almost exclusively graphitic-N (NG ), an electrode with predominantly pyridinic-N (NP ), and one with ≈1:1 NG :NP composition. These materials are used as model systems to investigate the activity of N-doped carbons in the oxygen reduction reaction (ORR) using voltammetry. Results show that selectivity toward 4e-reduction of O2 is strongly influenced by the NG /NP site composition, with the material possessing nearly uniform NG /NP composition being the only one yielding a 4e-reduction. Computational studies on model graphene clusters are carried out to elucidate the effect of N-site homogeneity on the reaction pathway. Calculations show that for pure NG -doping or NP -doping of model graphene clusters, adsorption of hydroperoxide and hydroperoxyl radical intermediates, respectively, is weak, thus favoring desorption prior to complete 4e-reduction to hydroxide. Clusters with mixed NG /NP sites display synergistic effects, suggesting that co-presence of these sites improves activity and selectivity by achieving high theoretical reduction potentials while facilitating retention of intermediates.

A photochemical approach for a fast and self-limited covalent modification of surface supported graphene with photoactive dyes.

Herein, we report a simple method for a covalent modification of surface supported graphene with photoactive dyes. Graphene was fabricated on cubic-SiC/Si(001) wafers due to their low cost and suitability for mass-production of continuous graphene fit for electronic applications on millimetre scale. Functionalisation of the graphene surface was carried out in solution via white light induced photochemical generation of phenazine radicals from phenazine diazonium salt. The resulting covalently bonded phenazine-graphene hybrid structure was characterised by scanning tunnelling microscopy (STM) and spectroscopy (STS), Raman spectroscopy and density functional theory (DFT) calculations. It was found that phenazine molecules form an overlayer, which exhibit a short range order with a rectangular unit cell on the graphene surface. DFT calculations based on STM results reveal that molecules are standing up in the overlayer with the maximum coverage of 0.25 molecules per graphene unit cell. Raman spectroscopy and STM results show that the growth is limited to one monolayer of standing molecules. STS reveals that the phenazine-graphene hybrid structure has a band gap of 0.8 eV.

Quantifying the Performance of P-Type Transparent Conducting Oxides by Experimental Methods.

Screening for potential new materials with experimental and theoretical methods has led to the discovery of many promising candidate materials for p-type transparent conducting oxides. It is difficult to reliably assess a good p-type transparent conducting oxide (TCO) from limited information available at an early experimental stage. In this paper we discuss the influence of sample thickness on simple transmission measurements and how the sample thickness can skew the commonly used figure of merit of TCOs and their estimated band gap. We discuss this using copper-deficient CuCrO 2 as an example, as it was already shown to be a good p-type TCO grown at low temperatures. We outline a modified figure of merit reducing thickness-dependent errors, as well as how modern ab initio screening methods can be used to augment experimental methods to assess new materials for potential applications as p-type TCOs, p-channel transparent thin film transistors, and selective contacts in solar cells.

Decoupling the refractive index from the electrical properties of transparent conducting oxides via periodic superlattices.

We demonstrate an alternative approach to tuning the refractive index of materials. Current methodologies for tuning the refractive index of a material often result in undesirable changes to the structural or optoelectronic properties. By artificially layering a transparent conducting oxide with a lower refractive index material the overall film retains a desirable conductivity and mobility while acting optically as an effective medium with a modified refractive index. Calculations indicate that, with our refractive index change of 0.2, a significant reduction of reflective losses could be obtained by the utilisation of these structures in optoelectronic devices. Beyond this, periodic superlattice structures present a solution to decouple physical properties where the underlying electronic interaction is governed by different length scales.

Optical characterisation of plasmonic nanostructures on planar substrates using second-harmonic generation.

Off-normal, polarization dependent second-harmonic generation (SHG) measurements were performed ex situ on plasmonic nanostructures grown by self-assembly on nanopatterned templates. These exploratory studies of Ag nanoparticle (NP) arrays show that the sensitivity of SHG to the local fields, which are modified by the NP size, shape and distribution, makes it a promising fixed wavelength characterization technique that avoids the complexity of spectroscopic SHG. The off-normal geometry provides access to the out-of-plane SH response, which is typically an order-of-magnitude larger than the in-surface-plane response measured using normal incidence, for example in SHG microscopy. By choosing the plane of incidence orthogonal to the NP array direction, it was shown that the p-polarized SH response, as a function of input polarization, is very sensitive to NP morphology, with a change of 20% in the aspect ratio of the NPs producing a variation of a factor of 30 in the easily measureable ratio of the p-polarized SH field strength for s- and p-polarized input. The results show that such a fixed geometry could be used for the in situ characterization of anisotropic nanostructure morphology during growth by self-assembly, which could be particularly useful in situations where rotating the sample may be neither desirable nor easily accomplished.

Manipulating and probing the growth of plasmonic nanoparticle arrays using light.

Highly ordered self-assembled silver nanoparticle (NP) arrays have been produced by glancing angle deposition on faceted c-plane Al2O3 templates. The NP shape can be tuned by changing the substrate temperature during deposition. Reflectance anisotropy spectroscopy has been used to monitor the plasmonic evolution of the sample during the growth. The structures showed a strong dichroic response related to NP anisotropy and dipolar coupling. Furthermore, multipolar resonances due to sharp edge effects between NP and substrate were observed. Analytical and numerical methods have been used to explain the results and extract semi-quantitative information on the morphology of the NPs. The results provide insights on the growth mechanisms by the glancing angle deposition. Finally, it has been shown that the NP morphology can be manipulated by a simple illumination of the surface with an intense light source, inducing changes in the optical response. This opens up new possibilities for engineering plasmonic structure over large active areas.

Spectroscopic ellipsometry and polarimetry for materials and systems analysis at the nanometer scale: state-of-the-art, potential, and perspectives.

This paper discusses the fundamentals, applications, potential, limitations, and future perspectives of polarized light reflection techniques for the characterization of materials and related systems and devices at the nanoscale. These techniques include spectroscopic ellipsometry, polarimetry, and reflectance anisotropy. We give an overview of the various ellipsometry strategies for the measurement and analysis of nanometric films, metal nanoparticles and nanowires, semiconductor nanocrystals, and submicron periodic structures. We show that ellipsometry is capable of more than the determination of thickness and optical properties, and it can be exploited to gain information about process control, geometry factors, anisotropy, defects, and quantum confinement effects of nanostructures.