Reversed-phase monoliths prepared by UV polymerization of divinylbenzene.

Many different techniques have been developed to prepare monolithic materials specifically for chromatographic techniques. The two most popular polymerization techniques being thermal or via ultra violet (UV) light. Whereas thermal polymerization is easily employed for a whole variety of monomer and porogen systems, UV polymerization has been limited to methacrylate-based systems, and styrenic systems have been avoided due to their strong absorbance at low wavelengths. By careful consideration of wavelength, initiator and other system components, it was proven that reversed-phase columns for the separation of proteins and peptides can be prepared using divinylbenzene through UV initiation of 2-methyl-4'-(methylthio)-2-morpholinopropiophenone at a wavelength of 350 nm.

Separation of inorganic anions on a high capacity porous polymeric monolithic column and application to direct determination of anions in seawater.

A commercially available 4.6 mm id x 50 mm polymethacrylate-based monolithic strong anion exchange column (ProSwift SAX-1S) designed for the separation of proteins has been successfully used to separate small inorganic anions in the presence of a seawater sample matrix. Using a hydroxide eluent with suppressed conductivity detection the ion exchange capacity of this column declined over time; however, using KCl as the eluent, the column performance was stable with a capacity of 530 microequiv. for nitrate. The optimum conditions for the separation of iodate, bromate, nitrite, bromide and nitrate were assessed by constructing van Deemter plots using 1.00 and 0.100 M KCl. Efficiencies of up to 26 700 plates/m were recorded using 1.00 M KCl, at a flow rate of 0.20 mL/min but iodate was not baseline resolved from the void peak. By reducing the concentration of the eluent to 0.100 M, efficiencies of up to 39 900 plates/m could be obtained at 0.35 mL/min. By employing a linear gradient ranging from 0.05 to 1.00 M KCl the ions dissolved in distilled water or a salt water matrix could be baseline separated in less than 3 min at a flow rate of 2.50 mL/min.

Polymerised bicontinuous microemulsions as stationary phases for capillary electrochromatography. Effect of pore size on chromatographic performance.

Monolithic columns for capillary electrochromatography (CEC) were prepared by in situ polymerisation of bicontinuous microemulsions containing butyl methacrylate. The resulting monoliths were found to be permeable to mobile phase flow and their behaviour as CEC stationary phases was investigated. It was found that the monoliths were able to separate a simple test mixture of phthalates, but that efficiencies were low. However, several advantages of the monoliths compared to conventional ODS packed columns were found: preparation time is short, many columns can be prepared from the same batch of microemulsion and column conditioning is much faster. The columns show promise as stationary phases for CEC, but more development is required to improve efficiencies.