Dry but Not Humid Thermal Processing of Aloe vera Gel Promotes Cytotoxicity on Human Intestinal Cells HT-29.

Aloe vera products, both in food and cosmetics, are becoming increasingly popular due to their claimed beneficial effects, which are mainly attributed to the active compound acemannan. Usually, these end products are based on powdered starting materials. High temperatures during the drying process to obtain the starting materials have several advantages, like shortening the drying time, eliminating toxic aloin and reducing bacterial contamination. Nevertheless, there are two major drawbacks: first, at temperatures of 80 °C or higher, structural changes in acemannan, especially its deacetylation (>46%), are triggered, which does not happen at lower temperatures (14% at 60 °C); secondly, a toxic principle is formed at higher temperatures, resulting in a higher cytotoxicity. Thus, two temperature-dependent but opposing effects cause with a median cytotoxic concentration of CC50 = 0.4× a peak of cytotoxicity at 80 °C; at 60 °C this cytotoxic substance is not formed and at 100 °C aloin is more readily eliminated, resulting in a CC50 = 1.1× and CC50 = 1.4×, respectively. The cytotoxic substance generated by dry heat at 80 °C is not a modified polysaccharide because its polysaccharide-enriched alcohol-insoluble fraction is with CC50 = 0.9× less cytotoxic. Moreover, this substance is polar enough to be washed away with ethanol. Additionally, when Aloe gel is heated at 80 °C under humid conditions (pasteurization), the cytotoxicity does not increase (CC50 = 1.6×). Finally, to produce powdered starting materials from Aloe gel, it is recommended to use temperatures of around 60 °C in order to preserve the acemannan structure (and thus biological activity) and the low cytotoxicity.

Assessment of the electronic structure of 2,2'-pyridylpyrrolides as ligands.

The ligand class 2,2'-pyridylpyrrolide is surveyed, both for its structural features and its electronic structure, when attached to monovalent K, Cu, Ag, Au, and Rh. The influence of pyrrolide ring substituents is studied, as well as the question of push/pull interaction between the pyridyl and pyrrolide halves. The π donor ability of the pyrrolide is found to be less than that of an analogous phenyl. However, in contrast to the phenyl analog, the HOMO is pyrrolide π in character for pyridylpyrrolide complexes of copper and rhodium, while it is conventionally metal localized for planar, d(8) rhodium pyridylphenyl. Monovalent three-coordinate copper complexes show great deviations from Y-shaped toward T-shaped structures, including cases where the pyridyl ligand bonds only weakly.

Silver(I) and copper(I) complexes supported by fully fluorinated 1,3,5-triazapentadienyl ligands.

Synthesis of the perfluorinated 1,3,5-triazapentadiene [N{(CF(3))C(C(6)F(5))N}(2)]H and the use of its conjugate base as a supporting ligand for the isolation of silver(i) and copper(i) complexes are reported. Some of the related chemistry involving [N{(C(3)F(7))C(C(6)F(5))N}(2)](-) (that has bulkier -C(3)F(7) groups on the 1,3,5-triazapentadienyl ligand backbone) is also presented. X-ray crystallographic data show a wide variety of structures ranging from intermolecular, hydrogen-bonded chain structure for [N{(CF(3))C(C(6)F(5))N}(2)]H with a twisted W-shaped N(3)C(2) core, monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Ag(CN(t)Bu)(2) and [N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(CN(t)Bu)(2) where the κ(1)-bonded triazapentadienyl ligand bonding to the metal fragment via the central nitrogen atom, monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Ag(PPh(3))(2) and [N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(PPh(3))(2) that feature κ(1)-bonded triazapentadienyl ligand bonding to the metal fragment via one of the terminal nitrogen atoms, to that of the monomeric [N{(CF(3))C(C(6)F(5))N}(2)]Cu(CN(t)Bu)(2) containing a κ(2)-bonded triazapentadienyl ligand and a U-shaped NCNCN ligand backbone. The isocyanide adducts show relatively high ν(CN) values in the IR spectra.

Synthesis and characterization of silver(I) adducts supported solely by 1,3,5-triazapentadienyl ligands or by triazapentadienyl and other N-donors.

Halogenated 1,3,5-triazapentadienyl ligands [N{(C(3)F(7))C(C(6)F(5))N}(2)](-), [N{(CF(3))C(C(6)F(5))N}(2)](-) and [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)](-), alone or in combination with other N-donors like CH(3)CN, CH(3)(CH(2))(2)CN, and N(C(2)H(5))(3), have been used in the stabilization of thermally stable, two-, three- or four-coordinate silver(i) adducts. X-Ray crystallographic analyses of {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag}(n), {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCCH(3))}(n), {[N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]Ag(NCCH(3))}(n), {[N{(CF(3))C(C(6)F(5))N}(2)]Ag(NCCH(3))(2)}(n) and {[N{(C(3)F(7))C(C(6)F(5))N}(2)]Ag(NCC(3)H(7))}(n) revealed the presence of bridging 1,3,5-triazapentadienyl ligands bonded to silver through terminal nitrogen atoms. These adducts are polymeric in the solid state. [N{(C(3)F(7))C(2,6-Cl(2)C(6)H(3))N}(2)]AgN(C(2)H(5))(3) is monomeric and features a 1,3,5-triazapentadienyl ligand bonded to Ag(I) in a κ(1)-fashion via only one of the terminal nitrogen atoms. The solid state structure of [N{(C(3)F(7))C(C(6)F(5))N}(2)]H has also been reported and it forms polymeric chains via inter-molecular N-H···N hydrogen-bonding.

Comparing the tuberculin skin test and T-SPOT.TB blood test in children.

BACKGROUND: Interferon-γ-release assays (IGRAs) have been developed for the diagnosis of tuberculosis infection, but few data are available for children. There currently is no reference standard for the diagnosis of tuberculosis infection. OBJECTIVE: To compare the performance of 1 IGRA, the T-SPOT.TB assay with the tuberculin skin test (TST) in children with different epidemiologic risk factors for tuberculosis. METHODS: We conducted a prospective study of 210 patients referred to 3 pediatric tuberculosis clinics, including those with no risk factors for tuberculosis (low risk, n = 27), risk factors but no identifiable source case (intermediate risk, n = 78), contact with a known source case (high risk, n = 74), and active disease (n = 31). Children were tested with TST and T-SPOT.TB. Concordance analyses were performed, and assay outcomes were modeled by multivariate logistic regression. RESULTS: For 13 children with culture-confirmed tuberculosis disease, sensitivity of TST and T-SPOT.TB was 77% and 92%, respectively, and concordance was 69%. For high-risk children, concordance was 94% for BCG-unimmunized children and 88% for BCG-immunized children. For intermediate-risk children, concordance was 74% for BCG-unimmunized children and 33% for BCG-immunized children. For low-risk children, concordance was 74% for BCG-unimmunized children and 20% for BCG-immunized children. Multivariate analysis revealed that contact with a source case was associated with T-SPOT.TB result, but age and BCG immunization were not. CONCLUSIONS: T-SPOT.TB is comparable to the TST in the diagnosis of tuberculosis disease and identification of high-risk children with tuberculosis infection and is more specific than the TST in children who have received the BCG vaccine.

Ligand influence on metal aggregation: a unique bonding mode for pyridylpyrrolides.

The synthesis and characterization of a Cu(I) complex with a cis-bidentate monoanionic nitrogenous ligand, 2-pyridylpyrrolide, L, is reported. This shows binding of one base B = MeCN or CO per copper in a species LCu(B), but this readily releases the volatile ligand under vacuum with aggregation of transient LCu to a mixture of two enantiomers of a chiral trimer: a zwitterion containing inequivalent Cu(I) centers, possible via a new bonding mode of pyridylpyrrolide, and one with nitrogen lone pairs donating to two different metals. Density functional theory calculations show the energetics of both ligand binding and aggregation (including dimer and monomer alternatives), as well as the ability of this ligand to rotate away from planarity to accommodate a bridging structural role. The trimer serves as a synthon for the simple fragment LCu.

Synthesis and catalytic activity of an electron-deficient copper-ethylene triazapentadienyl complex.

The copper(i) ethylene complex [N{(C(3)F(7))C(Dipp)N}(2)]Cu(C(2)H(4)) (Dipp = 2,6-diisopropylphenyl) has been synthesized by treating [N{(C(3)F(7))C(Dipp)N}(2)]Cu(NCCH(3)) with ethylene at room temperature. [N{(C(3)F(7))C(Dipp)N}(2)]Cu(C(2)H(4)) is an air stable, yellow solid. X-Ray crystallographic data of [N{(C(3)F(7))C(Dipp)N}(2)]Cu(C(2)H(4)) show that the 1,3,5-triazapentadienyl ligand coordinates to copper in kappa(2)-fashion. The copper atom adopts a trigonal-planar geometry. [N{(C(3)F(7))C(Dipp)N}(2)]Cu(C(2)H(4)) and [N{(C(3)F(7))C(Dipp)N}(2)]Cu(NCCH(3)) effectively catalyze carbene and nitrene transfer to a variety of substrates in high efficiencies.

Monomeric copper(I), silver(I), and gold(I) alkyne complexes and the coinage metal family group trends.

A series of thermally stable, easily isolable, monomeric, and isoleptic coinage metal alkyne complexes have been reported. Treatment of [N{(C(3)F(7))C(Dipp)N}(2)]Li (the lithium salt of the 1,3,5-triazapentadiene [N{(C(3)F(7))C(Dipp)N}(2)]H) with AuCl, CF(3)SO(3)Ag or CF(3)SO(3)Cu in the presence of 3-hexyne led to the corresponding coinage metal alkyne complex [N{(C(3)F(7))C(Dipp)N}(2)]M(EtC[triple bond]CEt) in good yield (M = Au, Ag, Cu; Dipp = 2,6-diisopropylphenyl). X-ray crystal structures of the three coinage metal alkynes are remarkably similar, and show the presence of trigonal-planar metal sites with eta(2)-bonded 3-hexyne. The M-C and M-N bond distances vary in the order Cu < Au < Ag. The bending of the C-C[triple bond]C bond angle is largest for the gold, followed by Cu and Ag adducts. The gold adduct also shows the largest decrease in C[triple bond]C stretching frequency in Raman, while the Ag adduct shows the smallest change compared to that of the uncoordinated alkyne. DFT calculations on [N{(CF(3))C(Ph)N}(2)]M(EtC[triple bond]CEt) and the related ClM(EtC[triple bond]CEt) predict that the M-alkyne bond energy varies in the order Ag < Cu < Au. The gold adducts are also predicted to have the longest C[triple bond]C, largest deviation of C-C[triple bond]C bond angle from linearity, and smallest C[triple bond]C stretching frequency, followed by the Cu and Ag adducts. In these triazapentadienyl coinage metal adducts, the sigma-donation from alkyne --> M dominates over the M --> alkyne pi-back-donation.

Gold(I) ethylene and copper(I) ethylene complexes supported by a polyhalogenated triazapentadienyl ligand.

A rare gold(I) ethylene complex and the closely related copper(I) ethylene adduct have been isolated using [N{(C3F7)C(2,6-Cl2C6H3)N}2]- as the supporting ligand. [N{(C3F7)C(2,6-Cl2C6H3)N}2]Au(C2H4) (1) is an air-stable solid. It features a U-shaped triazapentadienyl ligand backbone and a three-coordinate, trigonal-planar gold center. The copper(I) adduct [N{(C3F7)C(2,6-Cl2C6H3)N}2]Cu(C2H4) (2) also has a similar structure. The 13C NMR signal corresponding to the ethylene carbons of 1 appears at about 64 ppm upfield from the free ethylene, while the ethylene carbons of 2 show a relatively smaller (39 ppm) upfield shift. [N{(C3F7)C(2,6-Cl2C6H3)N}2]M(C2H4) (M=Cu, Au) mediate carbene-transfer reactions from ethyl diazoacetate to saturated and unsaturated hydrocarbons.

Thermally stable gold(I) beta-diketiminate complexes.

The synthesis and X-ray structures of gold(I) adducts supported by beta-diketiminates have been reported. {[HC{(H)C(2,4,6-Br(3)C(6)H(2))N}(2)]Au}(2) and {[HC{(H)C(Dipp)N}(2)]Au}(2) [Dipp = 2,6-(i-Pr)(2)C(6)H(3)] are easily isolable solids and feature 12-membered macrocyclic ring structures. beta-Diketiminate ligands adopt a W-shaped conformation. Gold atoms are bonded to the nitrogen atoms in a linear fashion. (1)H NMR signals corresponding to the protons at the beta-diketiminate ligand beta-C position of the gold adducts appear at a notably high downfield region.

Syntheses of highly fluorinated 1,3,5-triazapentadienyl ligands and their use in the isolation of copper(I)-carbonyl and copper(I)-ethylene complexes.

Fully fluorinated triazapentadienyl ligand [N{(C3F7)C(C6F5)N}2]- and the related [N{(C3F7)C(2-F,6-(CF3)C6H3)N}2]- have been synthesized in good yield via a convenient route and used in the isolation of three- and four-coordinate copper(I)-carbon monoxide complexes. They show fairly high nu(CO) values (>2100 cm(-1)), indicating the presence of electron-poor Cu sites. The copper(I)-ethylene adduct [N{(C3F7)C(C6F5)N}2]Cu(C2H4), featuring a three-coordinate Cu site, has also been synthesized using [N{(C3F7)C(C6F5)N}2]CuNCCH3 and C2H4.